- 22 Jun, 2016 4 commits
-
-
Vinod Koul authored
We do not support async suspend due to dependency with rest of card and require suspend/resume be executed synchronously, mark the device accordingly. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
This reverts commit 3513798c ("ASoC: Intel: Add support for PM ops in bxt-rt298") as the right way to fix this is to disable async suspend Signed-off-by:
-
Vinod Koul authored
Kconfig help texts were missing periods as suggested by Randy. Also fix the alignment on a block of help text to be consistent with rest. Suggested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Vinod Koul authored
Randy reported following error when ACPI is not enabled: warning: (SND_SOC_INTEL_BYTCR_RT5640_MACH && SND_SOC_INTEL_BYTCR_RT5651_MACH && SND_SOC_INTEL_CHT_BSW_RT5672_MACH && SND_SOC_INTEL_CHT_BSW_RT5645_MACH && SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) selects SND_SST_IPC_ACPI +which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && ACPI) causing these build errors: In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:40:0: ../include/acpi/acpi_bus.h:65:20: error: conflicting types for 'acpi_evaluate_dsm' union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const u8 *uuid, In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:31:0: ../include/linux/acpi.h:676:34: note: previous definition of 'acpi_evaluate_dsm' was here static inline union acpi_object *acpi_evaluate_dsm(acpi_handle handle, CONFIG_SND_SST_IPC_ACPI was already dependent upon ACPI, but that was not solving it. So move the depends up to machine drivers and remove from CONFIG_SND_SST_IPC_ACPI. Reported-by:
-
- 14 Jun, 2016 8 commits
-
-
Vinod Koul authored
While clearing loaded module count, we should check first to see if module list is NULL or not. Some distributions can ship with no modules and thus list can be empty. Signed-off-by:
-
Jeeja KP authored
We need card to be early suspended and late resumed, so use prepare and complete for card suspend and resume. Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Signed-off-by:
Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by:
-
Jayachandran B authored
The stall bits needs to comprehend the number of DSP cores running, so update the stall and unstall register writes to comprehend SKL_DSP_CORES_MASK values as well. Signed-off-by:
Jayachandran B <jayachandran.b@intel.com> Signed-off-by:
Ramesh Babu <ramesh.babu@intel.com> Signed-off-by:
-
Senthilnathan Veppur authored
Broxton needs to send Purge firmware IPC to DSP before downloading the firmware. The DMA id needs to be updated for that. While at it also update Broxton boot sequence to send purge request after power up and before yanking off reset. Signed-off-by:
-
Jayachandran B authored
Broxton DSP needs retains code loaded during runtime_pm cycles. But it looses that on suspend cycle, so on resume we need to download the firmware again. This is done by adding a new flag and based on flag status, we download the firmware. Signed-off-by:
-
Senthilnathan Veppur authored
Capture from DMIC requires that we ignore the suspend, so mark these as ignore_suspend in bxt-rt298 machine. Signed-off-by:
-
Senthilnathan Veppur authored
We support stereo 48Khz audio, so add these as constraints for this card Signed-off-by:
-
Senthilnathan Veppur authored
Like Skylake, we can support 4 channel for DMIC, so add hw_params and constraints in the bxt-rt298 machine While at it, also add codec1 pipe for speaker playback. Signed-off-by:
-
- 07 Jun, 2016 10 commits
-
-
Jeeja KP authored
Don't update the runtime_delay in pointer query, delay need to reported as part of soc driver ops delay function. The delay value overwritten by ASoC core so this is dummy code and hence removing it. Signed-off-by:
-
Jeeja KP authored
For pass through pipe, Host and Link DMA id's are valid, instead of overwriting the params set the host and link based on pipe type. Signed-off-by:
-
Jeeja KP authored
DSP pipe type can be a pass through or it can be processing pipe. In case of pass through pipe, it is a single pipeline with both host and link copier in the same pipeline. Identify the DSP pipe type if it pass through or not. Pass through pipe is identified by checking if it has both host and link copier in the same pipeline. Signed-off-by:
-
Jeeja KP authored
We need to Identify the DSP pipe type and based on it being a pass thru pipeline or not, we need to copy the pipeline params. Pipe to widget mapping was earlier done in pre PMD widget handler, but since the pipe type would now be required in hw_params for bypass pipelines we need to move this to be done during the ASoC probe of the platform component. Signed-off-by:
-
Dharageswari R authored
On suspend firmware is re-initialized so resources are reset inside firmware. Driver should also clear the firmware counters at this time. Signed-off-by:
Dharageswari R <dharageswari.r@intel.com> Signed-off-by:
-
Dharageswari R authored
When DSP pipe/module is not initialized successfully, memory/mcps is not allocated. So check the pipe/module state to avoid freeing up of unallocated memory/mcps. And allocate resources when pipe/ module is initialized successfully. Signed-off-by:
-
Dharageswari R authored
SW needs to set the PGCTL.LSRMD = 1 to disable LPSRAM retention feature,otherwise it may lead to SRAM ECC Errors. Signed-off-by:
-
Dharageswari R authored
If pipeline is not STARTED, we do not need to pause pipeline while deleting. Signed-off-by:
-
Jeeja KP authored
When pipe is stopped/Paused, set the pipe state to paused instead of created. Signed-off-by:
-
Jeeja KP authored
In case of XRUN recovery PCM prepare will be called. In this case Host/Link DMAs are reset and reconfigured, hence the corresponding FE/BE pipe needs to be reset in order to get to a clean state. Signed-off-by:
-
- 01 Jun, 2016 2 commits
-
-
Sathyanarayana Nujella authored
This patch adds bxt_da7219_max98357a_i2s machine driver entry into machine table Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
-
Sathyanarayana Nujella authored
This patch adds Broxton-P I2S machine driver which uses DA7219 and MAX98357A codecs. Signed-off-by:
-
- 31 May, 2016 2 commits
-
-
Yong Zhi authored
This machine driver can support 2 or 4 DMIC configuration, so apply the ch constraint according to driver pdata. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Yong Zhi authored
This machine driver can support 2 or 4 DMIC configuration, so apply the ch constraint according to driver pdata. Signed-off-by:
-
- 30 May, 2016 11 commits
-
-
Vinod Koul authored
Broxton uses different offset in manifest for parsing module table. So invoke common parsing utility from broxton using broxton offset. Signed-off-by:
-
Vinod Koul authored
SKylake uses different offset in manifest for parsing module table. So invoke common parsing utility from skylake using skylake offset. Signed-off-by:
-
Shreyas NC authored
Module params like module_id and loadable flag can be changed in the DSP Firmware. These are kept in the firmware manifest and driver should read these values from this manifest. So, add support to parse the DSP firmware manifest and read these module params. Signed-off-by:
Shreyas NC <shreyas.nc@intel.com> Signed-off-by:
-
Vinod Koul authored
Broxton firmrware comes with extended manifest so invoke skl_dsp_strip_extended_manifest() to check and strip Signed-off-by:
-
Vinod Koul authored
Future firmware updates may comes with extended manifest so invoke skl_dsp_strip_extended_manifest() to check and strip Signed-off-by:
-
Vinod Koul authored
We have firmware pointer is driver context, so use that instead of local pointer. Signed-off-by:
-
Ramesh Babu authored
Some upcoming platforms like broxton etc have extended manifest in firmware binary. This is not required to be downloaded to DSP. So driver needs to strip this before downloading. Add a utility function to check if a header exists, and remove it in that case Signed-off-by:
-
Yong Zhi authored
Skylake can be configured with either both 2 and 4 channel DMIC array, or 2 channel DMIC array only, this patch provides an API to retrieve the DMIC info from nhlt. Signed-off-by:
-
Yong Zhi authored
Only mono channel is allowed for refcap device. Signed-off-by:
-
Yong Zhi authored
Add constraint for ref DMIC to match with the topology firmware config. Signed-off-by:
-
Randy Dunlap authored
This function stub should have been 'static' in the original patch so that multiple uses of the header file (in different drivers) will not cause multiple function definitions. sound/soc/intel/boards/built-in.o: In function `sst_acpi_find_name_from_hid': (.text+0x560): multiple definition of `sst_acpi_find_name_from_hid' sound/soc/intel/atom/built-in.o:(.text+0x10610): first defined here ../scripts/Makefile.build:369: recipe for target 'sound/soc/intel/built-in.o' failed Fixes: f17131a9: add function stub when ACPI is not enabled Signed-off-by:
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
