- 13 May, 2020 2 commits
-
-
Brian Masney authored
The address referenced by this driver is within the Qualcomm Clock namespace so let's drop the msm-vibrator bindings so that a more generic solution can be used instead. No one is currently using driver so this won't affect any users. Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200513013140.69935-3-masneyb@onstation.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Brian Masney authored
The address referenced in this binding is within the Qualcomm Clock namespace so let's drop the msm-vibrator bindings so that a more generic solution can be used instead. No one is currently using these bindings so this won't affect any users. Signed-off-by: Brian Masney <masneyb@onstation.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200513013140.69935-2-masneyb@onstation.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 May, 2020 4 commits
-
-
Johnny Chuang authored
There is an non-touch case by non-calibration after update firmware. Elan could know calibrate or not by calibration count. The value of '0xffff' means we didn't calibrate after update firmware. If calibrate success, it will plus one and change to '0x0000'. Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Link: https://lore.kernel.org/r/1588754932-5902-1-git-send-email-johnny.chuang.emc@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jiada Wang authored
input_mt_report_slot_state() ignores "tool" argument when the slot is closed, which has caused a bit of confusion. Let's introduce input_mt_report_slot_inactive() to report inactive slot state. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
David Heidelberg authored
Convert elants_i2c.txt DT binding to YAML and put into correct directory. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200423173253.711725-2-david@ixit.czSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Sync up with mainline to get device tree and other changes.
-
- 10 May, 2020 2 commits
-
-
Linus Walleij authored
This adds a new driver for the Cypress CY8CTMA140 touchscreen. This driver is inspired by out-of-tree code for the Samsung GT-S7710 mobile phone. I have tried to compare the structure and behaviour of this touchscreen to the existing CYTTSP and CYTTSP4 generics and it seems pretty different. It is also different in character from the cy8ctmg110_ts.c. It appears to rather be vaguely related to the Melfas MMS114 driver, yet distinctly different. Dmitry Torokhov rewrote the key scanning code during the submission process so the driver is a joint work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200506123435.187432-2-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Linus Walleij authored
This adds device tree bindings for the Cypress CY8CTMA140 touchscreen. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200506123435.187432-1-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 May, 2020 4 commits
-
-
Ahmad Fatoum authored
Probing the device takes a while, because we sleep for 300 ms after a reset; allow asynchronous probing so this can happen in the background while other devices are being probed. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-5-m.felsch@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marco Felsch authored
It is possible to bring the device into a deep sleep state. To exit this state the reset or wakeup pin must be toggeled as documented in [1]. Because of the poor documentation I used the several downstream kernels [2] and other applications notes [3] to indentify the related registers. Furthermore I added the support to disable the device completely which is obviously the most effective power-saving mechanism. This mechanism needs the reset pin to ensure the power-up/down sequence. We can't apply any of these power-saving mechanism if both pins are missing (not connected) or if it is a wakeup device. [1] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x26.pdf https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x06.pdf [2] https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/input/touchscreen/ft5x_ts.c https://github.com/Pablito2020/focaltech-touch-driver/blob/master/ft5336_driver.c [3] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x16_registers.pdfSigned-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-4-m.felsch@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marco Felsch authored
We need to restore the parameters if we switch between the factory/work mode and during the resume process if we switched off the power-supply. Therefore refactor edt_ft5x06_work_mode() and move the "restore the parameters" into a helper routine so we can reuse it later. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-3-m.felsch@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marco Felsch authored
Since commit b6eba860 ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults(). Fixes: b6eba860 ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 Apr, 2020 3 commits
-
-
Rajat Jain authored
Allow the firmware to specify the mapping between the scan code and the linux keycode. This takes the form of a "linux,keymap" property which is an array of u32 values, each value specifying mapping for a key. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-3-rajatja@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rajat Jain authored
Certain keyboards have their top-row keys intended for actions such as "Browser back", "Browser Refresh", "Fullscreen" etc as their primary mode, thus they will send scan codes for those actions. Further, they don't have a dedicated "Fn" key so don't have the capability to generate function key codes (e.g. F1, F2 etc..). However in this case, if userspace still wants to "synthesize" those function keys using the top row action keys, it needs to know the physical position of the top row keys. (Essentially a mapping between usage codes and a physical location in the top row). This patch enhances the atkbd driver to receive such a mapping from the firmware / device tree, and expose it to userspace in the form of a function-row-physmap attribute. The attribute would be a space separated ordered list of physical codes, for the keys in the function row, in left-to-right order. The attribute will only be present if the kernel knows about such mapping, otherwise the attribute shall not be visible. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-2-rajatja@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rajat Jain authored
Attach the firmware node to the serio i8042 kbd device so that device properties can be passed from the firmware. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-1-rajatja@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 25 Apr, 2020 2 commits
-
-
Stephan Gerhold authored
MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Stephan Gerhold authored
The mms114 driver now supports MMS345L; document the melfas,mms345l binding that is used for it. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Andi Shyti <andi@etezian.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200423102431.2715-2-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 Apr, 2020 4 commits
-
-
Linus Walleij authored
There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in drivers/iio/light/gp2ap002.c. Delete this driver, it is unused in the kernel tree and new users can make use of the IIO driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200417203059.8151-1-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Kenny Levinsen authored
Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP. As evdev uses unkeyed wakeups, such a poll receives many spurious wakeups from uninteresting events. Use keyed wakeups to allow the wakeup target to more efficiently discard these uninteresting events. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200410233557.3892-1-kl@kl.wtfSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Christophe JAILLET authored
A 'y' is missing in spear-keyboard. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200412095711.9107-1-christophe.jaillet@wanadoo.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Christophe JAILLET authored
This should be 'tca6416', not 'tca6146' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200413152329.4435-1-christophe.jaillet@wanadoo.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 01 Apr, 2020 3 commits
-
-
Rajat Jain authored
Replace the /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ with /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ to help coreboot community consume this file without relaxing their licensing checks. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200329172513.133548-1-rajatja@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be stubbed out. For consistency use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485 ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200401014529.GL75430@dtor-ws [dtor: stubbed out the ACPI method accessors] Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 Mar, 2020 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge vm fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/sparse: fix kernel crash with pfn_section_valid check mm: fork: fix kernel_stack memcg stats for various stack implementations hugetlb_cgroup: fix illegal access to memory drivers/base/memory.c: indicate all memory blocks as removable mm/swapfile.c: move inode_lock out of claim_swapfile
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for the Hyper-V clocksource driver to make sched clock actually return nanoseconds and not the virtual clock value which increments at 10e7 HZ (100ns)" * tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single bugfix to prevent reference leaks in irq affinity notifiers" * tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix reference leaks on irq affinity notifiers
-
Aneesh Kumar K.V authored
Fix the crash like this: BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000c3447c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1 ... NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0 LR [c000000000088354] vmemmap_free+0x144/0x320 Call Trace: section_deactivate+0x220/0x240 __remove_pages+0x118/0x170 arch_remove_memory+0x3c/0x150 memunmap_pages+0x1cc/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x2f8/0x3e0 device_release_driver_internal+0x168/0x270 unbind_store+0x130/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x68/0x80 kernfs_fop_write+0x100/0x290 __vfs_write+0x3c/0x70 vfs_write+0xcc/0x240 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The crash is due to NULL dereference at test_bit(idx, ms->usage->subsection_map); due to ms->usage = NULL in pfn_section_valid() With commit d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after depopulate_section_mem(). This was done so that pfn_page() can work correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that config pfn_to_page does __section_mem_map_addr(__sec) + __pfn; where static inline struct page *__section_mem_map_addr(struct mem_section *section) { unsigned long map = section->section_mem_map; map &= SECTION_MAP_MASK; return (struct page *)map; } Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is used to check the pfn validity (pfn_valid()). Since section_deactivate release mem_section->usage if a section is fully deactivated, pfn_valid() check after a subsection_deactivate cause a kernel crash. static inline int pfn_valid(unsigned long pfn) { ... return early_section(ms) || pfn_section_valid(ms, pfn); } where static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn) { int idx = subsection_map_index(pfn); return test_bit(idx, ms->usage->subsection_map); } Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is freed. For architectures like ppc64 where large pages are used for vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple sections. Hence before a vmemmap mapping page can be freed, the kernel needs to make sure there are no valid sections within that mapping. Clearing the section valid bit before depopulate_section_memap enables this. [aneesh.kumar@linux.ibm.com: add comment] Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com Fixes: d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the space for task stacks can be allocated using __vmalloc_node_range(), alloc_pages_node() and kmem_cache_alloc_node(). In the first and the second cases page->mem_cgroup pointer is set, but in the third it's not: memcg membership of a slab page should be determined using the memcg_from_slab_page() function, which looks at page->slab_cache->memcg_params.memcg . In this case, using mod_memcg_page_state() (as in account_kernel_stack()) is incorrect: page->mem_cgroup pointer is NULL even for pages charged to a non-root memory cgroup. It can lead to kernel_stack per-memcg counters permanently showing 0 on some architectures (depending on the configuration). In order to fix it, let's introduce a mod_memcg_obj_state() helper, which takes a pointer to a kernel object as a first argument, uses mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls mod_memcg_state(). It allows to handle all possible configurations (CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without spilling any memcg/kmem specifics into fork.c . Note: This is a special version of the patch created for stable backports. It contains code from the following two patches: - mm: memcg/slab: introduce mem_cgroup_from_obj() - mm: fork: fix kernel_stack memcg stats for various stack implementations [guro@fb.com: introduce mem_cgroup_from_obj()] Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com Fixes: 4d96ba35 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mina Almasry authored
This appears to be a mistake in commit faced7e0 ("mm: hugetlb controller for cgroups v2"). Essentially that commit does a hugetlb_cgroup_from_counter assuming that page_counter_try_charge has initialized counter. But if that has failed then it seems will not initialize counter, so hugetlb_cgroup_from_counter(counter) ends up pointing to random memory, causing kasan to complain. The solution is to simply use 'h_cg', instead of hugetlb_cgroup_from_counter(counter), since that is a reference to the hugetlb_cgroup anyway. After this change kasan ceases to complain. Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2") Reported-by: syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com Signed-off-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Giuseppe Scrivano <gscrivan@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9f ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.comReported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naohiro Aota authored
claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in vti6, from Torsten Hilbrich. 2) Fix double free in xfrm_policy_timer, from YueHaibing. 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from Johannes Berg. 4) Wrong allocation failure check in qlcnic driver, from Xu Wang. 5) Get ks8851-ml IO operations right, for real this time, from Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits) r8169: fix PHY driver check on platforms w/o module softdeps net: ks8851-ml: Fix IO operations, again mlxsw: spectrum_mr: Fix list iteration in error path qlcnic: Fix bad kzalloc null test mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX mac80211: mark station unauthorized before key removal mac80211: Check port authorization in the ieee80211_tx_dequeue() case cfg80211: Do not warn on same channel at the end of CSA mac80211: drop data frames without key on encrypted links ieee80211: fix HE SPR size calculation nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type xfrm: policy: Fix doulbe free in xfrm_policy_timer bpf: Explicitly memset some bpf info structures declared on the stack bpf: Explicitly memset the bpf_attr structure bpf: Sanitize the bpf_struct_ops tcp-cc name vti6: Fix memory leak of skb if input policy check fails esp: remove the skb from the chain when it's enqueued in cryptd_wq ipv6: xfrm6_tunnel.c: Use built-in RCU list checking xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire xfrm: fix uctx len check in verify_sec_ctx_len ...
-
- 28 Mar, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Three more driver bugfixes, and two doc improvements fixing build warnings while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pca-platform: Use platform_irq_get_optional i2c: st: fix missing struct parameter description i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status() i2c: fix a doc warning i2c: hix5hd2: add missed clk_disable_unprepare in remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to try to cope with USB enclosures that silently change reported parameters" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Fix optimal I/O size for devices that change reported values scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted
-
Chris Packham authored
The interrupt is not required so use platform_irq_get_optional() to avoid error messages like i2c-pca-platform 22080000.i2c: IRQ index 0 not found Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Alain Volmat authored
Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 27 Mar, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-03-27 The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 4 day(s) which contain a total of 4 files changed, 25 insertions(+), 20 deletions(-). The main changes are: 1) Explicitly memset the bpf_attr structure on bpf() syscall to avoid having to rely on compiler to do so. Issues have been noticed on some compilers with padding and other oddities where the request was then unexpectedly rejected, from Greg Kroah-Hartman. 2) Sanitize the bpf_struct_ops TCP congestion control name in order to avoid problematic characters such as whitespaces, from Martin KaFai Lau. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
On Android/x86 the module loading infrastructure can't deal with softdeps. Therefore the check for presence of the Realtek PHY driver module fails. mdiobus_register() will try to load the PHY driver module, therefore move the check to after this call and explicitly check that a dedicated PHY driver is bound to the PHY device. Fixes: f3259377 ("r8169: check that Realtek PHY driver module is loaded") Reported-by: Chih-Wei Huang <cwhuang@android-x86.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-