- 23 Mar, 2019 40 commits
-
-
Andre Przywara authored
[ Upstream commit ee0b27a3 ] According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12. Fix the gate bit definitions in the clock driver. Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eugene Loh authored
[ Upstream commit 6db2983c ] When checking for symbols with excessively long names, account for null terminating character. Fixes: f3462aa9 ("Kbuild: Handle longer symbols in kallsyms.c") Signed-off-by:
Eugene Loh <eugene.loh@oracle.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 5c59801f ] According to the datasheet and the reference code from Allwinner, the bit used to de-assert the TCON reset is bit 4, not bit 3. Fix it in the V3s CCU driver. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Gabriel Fernandez authored
[ Upstream commit 2439d37e ] This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Miguel Ojeda authored
[ Upstream commit 69ef9bc5 ] On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running. From kernel/workqueue.c: The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it. Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/Reported-by:
Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by:
Robin van der Gracht <robin@protonic.nl> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit f275a465 ] The driver's interrupt handler checks whether a message is currently being handled with the curr_msg pointer. When it is NULL, the interrupt is considered to be unexpected. Similarly, the i2c_start_transfer routine checks for the remaining number of messages to handle in num_msgs. However, these values are never cleared and always keep the message and number relevant to the latest transfer (which might be done already and the underlying message memory might have been freed). When an unexpected interrupt hits with the DONE bit set, the isr will then try to access the flags field of the curr_msg structure, leading to a fatal page fault. The msg_buf and msg_buf_remaining fields are also never cleared at the end of the transfer, which can lead to similar pitfalls. Fix these issues by introducing a cleanup function and always calling it after a transfer is finished. Fixes: e2474541 ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shubhrajyoti Datta authored
[ Upstream commit d358def7 ] In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed. Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices. Fixes: df8eb569 ("i2c: Add driver for Cadence I2C controller") Reported-by:
Kyle Roeschley <kyle.roeschley@ni.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Tested-by:
-
Huang Zijiang authored
[ Upstream commit c969c6e7 ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by:
Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 2c2ade81 ] The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used. However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`. Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing. To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Rajneesh Bhardwaj authored
[ Upstream commit 8cd8f0ce ] Add the CPUID model number of Icelake (ICL) mobile processors to the Intel family list. Icelake U/Y series uses model number 0x7E. Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David E. Box" <david.e.box@intel.com> Cc: dvhart@infradead.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190214115712.19642-2-rajneesh.bhardwaj@linux.intel.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 8d6ea932 ] The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Bill Kuzeja authored
[ Upstream commit 388a4995 ] In qla2x00_async_tm_cmd, we reference off sp after it has been freed. This caused a panic on a system running a slub debug kernel. Since fcport is passed in anyways, just use that instead. Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
Giridhar Malavali <gmalavali@marvell.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 2f1ee091 ] This reverts commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init"). When booting a system with "page_owner=on", start_kernel page_ext_init invoke_init_callbacks init_section_page_ext init_page_owner init_early_allocated_pages init_zones_in_node init_pages_in_zone lookup_page_ext page_to_nid The issue here is that page_to_nid() will not work since some page flags have no node information until later in page_alloc_init_late() due to DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds access with an invalid nid. UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50 index 7 is out of range for type 'zone [5]' Also, kernel will panic since flags were poisoned earlier with, CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_NODE_NOT_IN_PAGE_FLAGS=n start_kernel setup_arch pagetable_init paging_init sparse_init sparse_init_nid memblock_alloc_try_nid_raw It did not handle it well in init_pages_in_zone() which ends up calling page_to_nid(). page:ffffea0004200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) page_owner info is not active (free page?) kernel BUG at include/linux/mm.h:990! RIP: 0010:init_page_owner+0x486/0x520 This means that assumptions behind commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert the commit for now. A proper way to move the page_owner initialization to sooner is to hook into memmap initialization. Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 414fd080 ] For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit d2ceb7e5 ] If nfs_page_async_flush() removes the page from the mapping, then we can't use page_file_mapping() on it as nfs_updatepate() is wont to do when receiving an error. Instead, push the mapping to the stack before the page is possibly truncated. Fixes: 8fc75bed ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Nicolas Morey-Chaisemartin authored
[ Upstream commit a4cb5bdb ] Make sure the device has at least 2 completion vectors before allocating to compvec#1 Fixes: a4699f56 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode) Signed-off-by:
Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 96d7cb93 ] floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value. However, after commit a0c80efe, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing. Reviewed-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Andrea Claudi authored
[ Upstream commit 098e13f5 ] ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation, but lacks proper Kconfig dependencies and does not explicitly request defrag features. As a result, if netfilter hooks are not loaded, when IPv6 fragmented packet are handled by ipvs only the first fragment makes through. Fix it properly declaring the dependency on Kconfig and registering netfilter hooks on ip_vs_add_service() and ip_vs_new_dest(). Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jianchao Wang authored
[ Upstream commit aef1897c ] When requeue, if RQF_DONTPREP, rq has contained some driver specific data, so insert it to hctx dispatch list to avoid any merge. Take scsi as example, here is the trace event log (no io scheduler, because RQF_STARTED would prevent merging), kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H] scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test] scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test] kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H] scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0] scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0] kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0] (32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP. Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP, the sdb only contained the part of (32768 + 8), then only that part was completed. The lucky thing was that scsi_io_completion detected it and requeued the remaining part. So we didn't get corrupted data. However, the requeue of (32776 + 8) is not expected. Suggested-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Francesco Ruggeri authored
[ Upstream commit 8d29d16d ] If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running % ebtables -t broute -F BROUTING from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt. [ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 6157ca0d ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 4926b51b ] If a driver does any significant activity in its ibss_join method, then it will very well expect that to be called during restart, before any stations are added. Do that. Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit a342083a ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 33a841ce ] To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by:
-
Dmitry Torokhov authored
[ Upstream commit 62844288 ] Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 50d6b3cf ] If we have a kernel configured for periodic timer interrupts, and we have cpuidle enabled, then we end up with CPU1 losing timer interupts after a hotplug. This can manifest itself in RCU stall warnings, or userspace becoming unresponsive. The problem is that the kernel initially wants to use the TWD timer for interrupts, but the TWD loses context when we enter the C3 cpuidle state. Nothing reprograms the TWD after idle. We have solved this in the past by switching to broadcast timer ticks, and cpuidle44xx switches to that mode at boot time. However, there is nothing to switch from periodic mode local timers after a hotplug operation. We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one would expect would take care of the issue, but internally this only deals with one-shot local timers - tick_broadcast_enable() on the other hand only deals with periodic local timers. So, we need to call both. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: just standardized the subject line] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 860b454c ] This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below. Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver. [ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK *** Fixes: 647d04f8 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by:
Krzysztof Kozłowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
James Morse authored
[ Upstream commit 7d826029 ] On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8" # lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474 Info: Placing fdt at 0x8fe00000 - 0x8fffffff Info: virtio-mmio.devices=0x200@0x10000:36 Info: virtio-mmio.devices=0x200@0x10200:37 Info: virtio-mmio.devices=0x200@0x10400:38 [ 614.178186] Kernel panic - not syncing: HYP panic: [ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.178186] VCPU:00000000f8de32f1 [ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799 [ 614.178446] Call trace: [ 614.178480] dump_backtrace+0x0/0x148 [ 614.178567] show_stack+0x24/0x30 [ 614.178658] dump_stack+0x90/0xb4 [ 614.178710] panic+0x13c/0x2d8 [ 614.178793] hyp_panic+0xac/0xd8 [ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0 [ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798 [ 614.179038] kvm_vcpu_ioctl+0x360/0x898 [ 614.179087] do_vfs_ioctl+0xc4/0x858 [ 614.179174] ksys_ioctl+0x84/0xb8 [ 614.179261] __arm64_sys_ioctl+0x28/0x38 [ 614.179348] el0_svc_common+0x94/0x108 [ 614.179401] el0_svc_handler+0x38/0x78 [ 614.179487] el0_svc+0x8/0xc [ 614.179558] SMP: stopping secondary CPUs [ 614.179661] Kernel Offset: disabled [ 614.179695] CPU features: 0x003,2a80aa38 [ 614.179758] Memory Limit: none [ 614.179858] ---[ end Kernel panic - not syncing: HYP panic: [ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.179858] VCPU:00000000f8de32f1 ]--- Annotate the VHE world-switch functions that aren't marked __hyp_text using NOKPROBE_SYMBOL(). Signed-off-by:
James Morse <james.morse@arm.com> Fixes: 3f5c90b8 ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Christoffer Dall authored
[ Upstream commit ab2d5eb0 ] We currently initialize the group of private IRQs during kvm_vgic_vcpu_init, and the value of the group depends on the GIC model we are emulating. However, CPUs created before creating (and initializing) the VGIC might end up with the wrong group if the VGIC is created as GICv3 later. Since we have no enforced ordering of creating the VGIC and creating VCPUs, we can end up with part the VCPUs being properly intialized and the remaining incorrectly initialized. That also means that we have no single place to do the per-cpu data structure initialization which depends on knowing the emulated GIC model (which is only the group field). This patch removes the incorrect comment from kvm_vgic_vcpu_init and initializes the group of all previously created VCPUs's private interrupts in vgic_init in addition to the existing initialization in kvm_vgic_vcpu_init. Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 20589c8c ] Failing to properly reset system registers is pretty bad. But not quite as bad as bringing the whole machine down... So warn loudly, but slightly more gracefully. Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 358b28f0 ] The current kvm_psci_vcpu_on implementation will directly try to manipulate the state of the VCPU to reset it. However, since this is not done on the thread that runs the VCPU, we can end up in a strangely corrupted state when the source and target VCPUs are running at the same time. Fix this by factoring out all reset logic from the PSCI implementation and forwarding the required information along with a request to the target VCPU. Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Christoffer Dall authored
[ Upstream commit e761a927 ] We have two ways to reset a vcpu: - either through VCPU_INIT - or through a PSCI_ON call The first one is easy to reason about. The second one is implemented in a more bizarre way, as it is the vcpu that handles PSCI_ON that resets the vcpu that is being powered-on. As we need to turn the logic around and have the target vcpu to reset itself, we must take some preliminary steps. Resetting the VCPU state modifies the system register state in memory, but this may interact with vcpu_load/vcpu_put if running with preemption disabled, which in turn may lead to corrupted system register state. Address this by disabling preemption and doing put/load if required around the reset logic. Reviewed-by:
-
Kuninori Morimoto authored
[ Upstream commit d9111d36 ] commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by:
Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
-
Pierre-Louis Bossart authored
[ Upstream commit c16e1201 ] KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition. Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values. Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink Fixes: 8a70b454 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Yizhuo authored
[ Upstream commit dc30e703 ] In function omap4_dsi_mux_pads(), local variable "reg" could be uninitialized if function regmap_read() returns -EINVAL. However, it will be used directly in the later context, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 0840242e ] Commit 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer for reparenting of the timer clock. With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. Fixes: 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Paweł Chmiel authored
[ Upstream commit 94803aef ] This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by:
-
Jonathan Bakker authored
[ Upstream commit 3ca232df ] pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit 4a8ef699 ] Dan Carpenter reported the following: The patch 52898025: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025 ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit 26cd8657 ] Ports are described by child 'port' nodes contained in the device node. 'ports' is optional and is used to group all 'port' nodes which is not the case here. This patch fixes the following warnings: arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
