rpadlpar_core.c: Provide parallel routines to search the older device-
tree properties ("ibm,drc-indexes", "ibm,drc-names", "ibm,drc-types"
and "ibm,drc-power-domains"), or the new property "ibm,drc-info".

The interface to examine the DRC information is changed from a "get"
function that returns values for local verification elsewhere, to a
"check" function that validates the 'name' and/or 'type' of a device
node.  This update hides the format of the underlying device-tree
properties, and concentrates the value checks into a single function
without requiring the user to verify whether a search was successful.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

pseries/drc-info: Provide parallel routines to convert between
drc_index and CPU numbers at runtime, using the older device-tree
properties ("ibm,drc-indexes", "ibm,drc-names", "ibm,drc-types"
and "ibm,drc-power-domains"), or the new property "ibm,drc-info".
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Firmware Features: Define new bit flag representing the presence of
new device tree property "ibm,drc-info".  The flag is used to tell
the front end processor whether the Linux kernel supports the new
property, and by the front end processor to tell the Linux kernel
that the new property is present in the device tree.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The overview comments in the powerpc watchdog are out of date after
several iterations and changes of the code. Bring them up to date.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

feature fixups need to use patch_instruction() early in the boot,
even before the code is relocated to its final address, requiring
patch_instruction() to use PTRRELOC() in order to address data.

But feature fixups applies on code before it is set to read only,
even for modules. Therefore, feature fixups can use
raw_patch_instruction() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

patch_instruction() uses almost the same sequence as
__patch_instruction()

This patch refactor it so that patch_instruction() uses
__patch_instruction() instead of duplicating code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch restores the alphabetic order which was broken by
commit 1e0fc9d1 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX
for some configs")

Fixes: 1e0fc9d1 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The switch log prints the tv_sec portion of timespec as a 32-bit
number, while overflows in 2106. It also uses the timespec type,
which is safe on 64-bit architectures, but deprecated because
it causes overflows in 2038 elsewhere.

This changes it to timespec64 and printing a 64-bit number for
consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In an effort to remove all instances of 'struct timeval'
from the kernel, I'm changing the powerpc mpic_timer interface
to use plain seconds instead. There is only one user of this
interface, and that doesn't use the microseconds portion, so
the code gets noticeably simpler in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

9003a249 removed checn from the DMA window pages allocator, however
the VFIO driver tests limits before doing so by calling
the get_table_size hook which was left behind; this fixes it.

Fixes: 9003a249 "powerpc/powernv/ioda: Remove explicit max window size check"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Radix enabled platforms don't support subpage_prot() system calls. But
at present the system call goes through without an error and fails
later on while validating expected subpage accesses. Lets not allow
the system call on powerpc radix platforms to begin with to prevent
this confusion in user space.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Patch provides the ability for a process to
associate a pkey with a address range.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Finally this patch provides the ability for a process to
allocate and free a protection key.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PAPR defines 'ibm,processor-storage-keys' property. It exports two
values. The first value holds the number of data-access keys and the
second holds the number of instruction-access keys. Due to a bug in
the firmware, instruction-access keys is always reported as zero.
However any key can be configured to disable data-access and/or
disable execution-access. The inavailablity of the second value is not
a big handicap, though it could have been used to determine if the
platform supported disable-execution-access.

Non-PAPR platforms do not define this property in the device tree yet.
Fortunately power8 is the only released Non-PAPR platform that is
supported. Here, we hardcode the number of supported pkey to 32, by
consulting the PowerISA3.0

This patch calculates the number of keys supported by the platform.
Also it determines the platform support for read/write/execution
access support for pkeys.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Use a PVR check instead of CPU_FTR for execute. Restrict to
 Power7/8/9 for now until older CPUs are tested.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The AMR/IAMR/UAMOR are part of the program context.
Allow it to be accessed via ptrace and through core files.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The value of the pkey, whose protection got violated,
is made available in si_pkey field of the siginfo structure.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

get_mm_addr_key() helper returns the pkey associated with
an address corresponding to a given mm_struct.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Handle Data and  Instruction exceptions caused by memory
protection-key.

The CPU will detect the key fault if the HPTE is already
programmed with the key.

However if the HPTE is not  hashed, a key fault will not
be detected by the hardware. The software will detect
pkey violation in such a case.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch provides the implementation for
arch_vma_access_permitted(). Returns true if the
requested access is allowed by pkey associated with the
vma.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make sure that the kernel does not access user pages without
checking their key-protection.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Integrate with upstream version of pte_access_permitted()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

helper function that checks if the read/write/execute is allowed
on the pte.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Map the PTE protection key bits to the HPTE key protection bits,
while creating HPTE  entries.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Map  the  key  protection  bits of the vma to the pkey bits in
the PTE.

The PTE  bits used  for pkey  are  3,4,5,6  and 57. The  first
four bits are the same four bits that were freed up  initially
in this patch series. remember? :-) Without those four bits
this patch wouldn't be possible.

BUT, on 4k kernel, bit 3, and 4 could not be freed up. remember?
Hence we have to be satisfied with 5, 6 and 7.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch independent code calls arch_override_mprotect_pkey()
to return a pkey that best matches the requested protection.

This patch provides the implementation.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch-independent code expects the arch to  map
a  pkey  into the vma's protection bit setting.
The patch provides that ability.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch provides the implementation of execute-only pkey.
The architecture-independent layer expects the arch-dependent
layer, to support the ability to create and enable a special
key which has execute-only permission.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Store and restore the AMR, IAMR and UAMOR register state of the task
before scheduling out and after scheduling in, respectively.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc has hardware support to disable execute on a pkey.
This patch enables the ability to create execute-disabled
keys.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch provides the detailed implementation for
a user to allocate a key and enable it in the hardware.

It provides the plumbing, but it cannot be used till
the system call is implemented. The next patch  will
do so.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Cleanup the bits corresponding to a key in the AMR, and IAMR
register, when the key is newly allocated/activated or is freed.
We dont want some residual bits cause the hardware enforce
unintended behavior when the key is activated or freed.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Introduce  helper functions that can initialize the bits in the AMR,
IAMR and UAMOR register; the bits that correspond to the given pkey.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Implements helper functions to read and write the key related
registers; AMR, IAMR, UAMOR.

AMR register tracks the read,write permission of a key
IAMR register tracks the execute permission of a key
UAMOR register enables and disables a key
Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Total 32 keys are available on power7 and above. However
pkey 0,1 are reserved. So effectively we  have  30 pkeys.

On 4K kernels, we do not  have  5  bits  in  the  PTE to
represent  all the keys; we only have 3bits. Two of those
keys are reserved; pkey 0 and pkey 1. So effectively  we
have 6 pkeys.

This patch keeps track of reserved keys, allocated  keys
and keys that are currently free.

Also it  adds  skeletal  functions  and macros, that the
architecture-independent code expects to be available.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Basic  plumbing  to   initialize  the   pkey  system.
Nothing is enabled yet. A later patch will enable it
once all the infrastructure is in place.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Rework copyrights to use SPDX tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The POWER9 core supports a new feature: ASB_Notify which requires the
support of the Special Purpose Register: TIDR.

The ASB_Notify command, generated by the AFU, will attempt to
wake-up the host thread identified by the particular LPID:PID:TID.

This patch assign a unique TIDR (thread id) for the current thread which
will be used in the process element entry.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Change the data type for the variable 'ncpu' in ppc_core_imc_cpu_offline(),
since cpumask_any_but() returns an 'int' value.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In memory Collection (IMC) counter pmu driver controls the ucode's
execution state. At the system boot, IMC perf driver pause the ucode.
Ucode state is changed to "running" only when any of the nest units
are monitored or profiled using perf tool.

Nest units support only limited set of hardware counters and ucode is
always programmed in the "production mode" ("accumulation") mode. This
mode is configured to provide key performance metric data for most of
the nest units.

But ucode also supports other modes which would be used for "debug" to
drill down specific nest units. That is, ucode when switched to
"powerbus" debug mode (for example), will dynamically reconfigure the
nest counters to target only "powerbus" related events in the hardware
counters. This allows the IMC nest unit to focus on powerbus related
transactions in the system in more detail. At this point, production
mode events may or may not be counted.

IMC nest counters has both in-band (ucode access) and out of band
access to it. Since not all nest counter configurations are supported
by ucode, out of band tools are used to characterize other nest
counter configurations.

Patch provides an interface via "debugfs" to enable the switching of
ucode modes in the system. To switch ucode mode, one has to first
pause the microcode (imc_cmd), and then write the target mode value to
the "imc_mode" file.

Proposed Approach:

In the proposed approach, the function (export_imc_mode_and_cmd) which
creates the debugfs interface for imc mode and command is implemented
in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer
base address for each chip.

The interface to expose imc mode and command is required only if we
have nest pmu units registered. Employing the existing data structures
to track whether we have any nest units registered will require to
extend data from perf side to opal-imc.c. Instead an integer is
introduced to hold that information by counting successful nest unit
registration. Debugfs interface is removed based on the integer count.

Example for the interface:

  $ ls /sys/kernel/debug/imc
  imc_cmd_0  imc_cmd_8  imc_mode_0  imc_mode_8
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Remove the allocation of struct imc_events from imc_parse_event().
Instead pass imc_events as a parameter to imc_parse_event(), which is
a pointer to a slot in the array allocated in
update_events_in_group().

Reported-by: Dan Carpenter ("powerpc/perf: Fix a sizeof() typo so we allocate less memory")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Factor out memory freeing part for attribute elements from
imc_common_cpuhp_mem_free().
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Remove the global variable 'thread_imc_pmu', since it is not used in the code.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>