- 20 Nov, 2015 8 commits
-
-
Mike Marciniszyn authored
This patch is a prelimary patch required to coalesce acks. The routine to "schedule" a QP for sending a NAK is now centralized in rc_defer_ack(). The flag is changed for clarity since the all acks will potentially use the deferral mechanism. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark F. Brown authored
Disabling one receive context when RX_DMA is receiving a packet can cause incorrect packet delivery for a subsequent packet on another receive context. This is resolved by doing the following: 1. Programming dummy tail address for every receive context before enabling it 2. While deallocating receive context resetting tail address to dummy address 3. Leaving the dummy address in when disabling tail update 4. When disabling receive context leaving tail update enabled Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Mark F. Brown <mark.f.brown@intel.com> Signed-off-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Now that we have a multi-threaded work queue we precomputed and store the SC and SDE on RC and UC QPs for faster access. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The workqueue is currently single threaded per port which for a small number of SDMA engines is ok. For hfi1, the there are up to 16 SDMA engines that can be fed descriptors in parallel. Use alloc_workqueue with a workqueue limit of the number of sdma engines and with WQ_CPU_INTENSIVE and WQ_HIGHPRI specified. Then change send to use the new scheduler which no longer needs to get the s_lock Reviewed-by:
-
Mike Marciniszyn authored
Move hfi1_migrate_qp from ruc.c to qp.[hc] in prep for modifying the QP workqueue. Signed-off-by:
-
Geliang Tang authored
Use kmalloc_array instead of kmalloc to allocate memory for an array. Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove unnecessary variable 'err' from functions c2_reject() and c2_service_destroy() since it can be replaced by a single line of code instead. Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Othmar Pasteka authored
Cleanup errors from checkpatch.pl. Signed-off-by:
Othmar Pasteka <pasteka@kabsi.at> Signed-off-by:
-
- 17 Nov, 2015 14 commits
-
-
Erik Arfvidson authored
Fixes trailling */ from vbuschannel.h and alignment issue on the same comment block Signed-off-by:
Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
-
Erik Arfvidson authored
This patch fixes the checkpatch warning messages in controlvmcompletionstatus.h. All the warning messages in this file are caused by "Block comments use atrailing */ on a separate line" Signed-off-by:
-
Erik Arfvidson authored
This patch fixes checkpatch.pl message: CHECK: Alignment should match open parenthesis Signed-off-by:
-
Erik Arfvidson authored
This patch fixes all the checkpatch.pl block commments that use a trailing */ in channel.h Signed-off-by:
-
Erik Arfvidson authored
This patch fixes all the checkpatch Block comments use a trailing */ while keeping comments clean. Signed-off-by:
-
Erik Arfvidson authored
This patch fixes the last checkpatch warning about: Block comments use a trailing */ on a separate line Signed-off-by:
-
Erik Arfvidson authored
This patch fixes last checkpatch warning for vbushelper.h WARNING: Block comments use a trailing */ on a separate line Signed-off-by:
-
Erik Arfvidson authored
This fixes last checkpatch warning: WARNING: Block comments use a trailing */ on a separate line Signed-off-by:
-
Erik Arfvidson authored
Fixed last warning message from checkpatch.pl by removing the wordiness of the comment Signed-off-by:
-
Erik Arfvidson authored
This patch fixes check warning from checkpatch.pl in the macro definition CHECK: spaces preferred around that '+' (ctx:VxV) Signed-off-by:
-
Erik Arfvidson authored
iochannel cleanup redudant comments in function declarations. Signed-off-by:
-
Erik Arfvidson authored
This patch fixes warning messages from checkpatch.pl specifically: WARNING: Block comments use a trailing */ on a separate lines Signed-off-by:
-
Sudip Mukherjee authored
In case of error we are jumping to err_del_scsipending_ent and always returning SCSI_MLQUEUE_DEVICE_BUSY from error path. We donot need a variable to return a fixed error value, it can be returned directly. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Sudip Mukherjee authored
The variables op, sd and zmotion were never being used. Signed-off-by:
-
- 16 Nov, 2015 18 commits
-
-
Gavin O'Leary authored
Made visorbus_main.c checkpatch warning-free by fixing the comment style issues. Signed-off-by:
Gavin O'Leary <gavinoleary3@gmail.com> Signed-off-by:
-
Shraddha Barke authored
Declare the function fwtty_port_put as static since it is used only in this particular file. Also remove the corresponding declaration from header file. Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Dean Luick authored
Use the one-shot LCB write implemented in the 8051 firmware. This speeds up 8051 LCB writes by 2x. Use old method for older firmwares. Reviewed-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Ignacio Hernandez authored
Changed the order in which diagnostics messages are printed, taking into account the cases where the errors are handled in rcv_hdrerr() and no further message is needed to report. Reviewed-by:
Mark Debbage <mark.debbage@intel.com> Reviewed-by:
Arthur Kepner <arthur.kepner@intel.com> Reviewed-by:
Ignacio Hernandez <ignacio.hernandez@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
opaportconfig ledon fails with error message due to port number being checked in the attr modifier. This change removes the check for the port number in AttrMod, so the P field is ignored. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Dean Luick authored
When looking for or validating a user device, only use devices that are currently active. Reviewed-by:
-
Jareer Abdel-Qader authored
During driver load the thermal sensor needs to be reset prior to initialization of the sensor. This prevents a possible sensor lock up which can cause the wrong temperature value to be reported. This fix leads to remove disabling thermal polling from reset_asic_csrs() function. Reviewed by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Jareer Abdel-Qader <jareer.h.abdel-qader@intel.com> Signed-off-by:
-
Dean Luick authored
B0 dual port parts require the SBus firmware to always be downloaded. Remove reset of the SBus Master spico. It is not necessary since the SBus firmware download already does that. Reviewed-by:
-
Vennila Megavannan authored
Some BIOS implementations turn off extended tags in DevCtl (a RW field) even though it was originally set and is advertised in DevCap Fix is to set it in the driver Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by:
-
Easwar Hariharan authored
The FLR on driver load asserts the QSFP reset pin and the driver does not deassert it after. This patch allows the external QSFP cable to exit reset by writing 1 to all the QSFP pins. Reviewed-by:
-
Sebastian Sanchez authored
Replacing dd_dev_info() for hfi1_cdbg() to avoid generating syslog output for every context that is open by PSM. Reviewed-by:
-
Markus Elfring authored
The module_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_EnqueueBuffer to dim_enqueue_buffer to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_EnqueueBuffer> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:877: Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_GetChannelState to dim_get_channel_state to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_GetChannelState> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:865: Signed-off-by:
-
Chaehyun Lim authored
The second argument name of DIM_GetChannelState declaration changes from dim_ch_state_ptr to state_ptr. The DIM_GetChannelState declaration and definition has same argument name as state_ptr. Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_ServiceChannel to dim_service_channel to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_ServiceChannel> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:857: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_ServiceIrq to dim_service_irq to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_ServiceIrq> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:819: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_DestroyChannel to dim_destroy_channel to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_DestroyChannel> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:806: Signed-off-by:
-
