- 11 Jan, 2006 40 commits
-
-
Chris Pascoe authored
V4L/DVB (3339): Activate remote control on HVR1100 - Add a missing case which was preventing the operation of the HVR1100 remote. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
David Woodhouse authored
Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as arguments instead, since all its callers were just calculating the 'to' address for themselves anyway... (and sometimes doing so badly). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
Removing the dependency on the boot image build was good, but it also meant that the $< expansion by make needed to be done explicitly. Noted by Stephen Hemminger. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David S. Miller authored
Also, drop __exit marker from ipv6_netfilter_fini() as this can be invoked from inet6_init() error handling paths. Based upon a report from Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
It needs <linux/etherdevice.h> for compare_ether_addr()
-
Matthew Wilcox authored
Cleanup vmlinux.lds.S by using STABS_DEBUG macro from vmlinux.lds.h instead of repeating the sections. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Matthew Wilcox authored
Fix Dino reporting on J2240. This particular machine thought it had a Cujo. Also add J2240 Dino chip to the hp_hardware_list. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
The bpp module parameter has been obsoleted in favour of a setup string, so remove the MODULE_PARM. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Fix stifb framebuffer console at 32bpp on a HCRX-24 card by properly setting DIRECTCOLOR. Also a few nice cleanups to the code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Use the F_EXTEND() macro instead of open coding it with an #ifdef. Provides a nice cleanup. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Alexey Dobriyan authored
Cleanup asm-parisc/processor.h to use C99 initializers in INIT_THREAD(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Thibaut VARENE authored
pdc_stable 0.10: As mentioned on LKML, pdc_stable wasn't checky enough on the return values of some calls. This patch makes it more robust to errors when registering objects in sysfs. Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Grant Grundler authored
Change to asm-parisc/pci.h makes the define of PCI_HOST_ADDR symmetrical with PCI_BUS_ADDR. Also add a comment about PA_VIEW and LMMIO/ELMMIO/GMMIO. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Guy Martin authored
PARPORT_GSC requires selecting PARPORT_NOT_PC in order to work properly. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Stuart Brady authored
OSS Harmony got missed on the conversion of parisc_device.hpa to a struct resource... fix its build. Signed-off-by: Stuart Brady <sdb@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Grant Grundler authored
max_low_pfn was not being set in arch/parisc/mm/init.c, causing severe problems whenever anything tried to use BLK_BOUNCE_HIGH. Set it to max_pfn like other similar architectures do. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Grant Grundler authored
Deal with overlapping LBA MMIO resources, rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps with the CPU HPA. Console output was: ... Found devices: 1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 } 2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 } ... FAILED: lba_fixup_bus() request for lmmio_space [fffffffff0000000/fffffffffecffffe] Output is now: LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to [fffffffff0000000,fffffffffe797fff] My only concern with this patch is how C8000 (PAT PDC) will report elmmio ranges when a gfx card is installed. I'll have to test this another day. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: James Bottomley <jejb@parisc-linux.org> Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Alexey Dobriyan authored
Add __iomem to __raw_check_addr(), which nukes ~13809 sparse warnings on allmodconfig. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Define some constants for HugeTLB pages, not that parisc-linux supports it yet. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Fix dino by using DINO_LOCAL_IRQS as the limit for gsc_find_local_irq() instead of the irq itself. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Matthew Wilcox authored
Make knapps work with its 64MB gfx card. I probably just broke another machine in the process, but assuming 64MB when 64MB aligned is probably safer than assuming 32MB all the time. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Fixup ioremap a bit. It seems to work on 32-bit kernels, but fails miserably on the first ioremapped access on 64-bit kernels. Also, having STI enabled causes it to fail. Probably because we're passing an ioremapped region to a real-mode STI call... Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Alexey Dobriyan authored
Annotate eisa_eeprom_read() with __user. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop. We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be found in any other parisc system. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Matthew Wilcox authored
Make flush_data_cache_local, flush_instruction_cache_local and flush_tlb_all_local take a void * so they don't have to be cast when using on_each_cpu(). This becomes a problem when on_each_cpu is a macro (as it is in current -mm). Also move the prototype of flush_tlb_all_local into tlbflush.h and remove its declaration from .c files. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Nicolas Kaiser authored
Header included twice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Nicolas Kaiser authored
Header included twice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Nicolas Kaiser authored
Header included twice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Nicolas Kaiser authored
Header included twice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Nicolas Kaiser authored
Headers included twice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Paul Jackson authored
Two little cpuset documentation fixes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Adrian Bunk authored
drivers/net/gianfar_sysfs.c still contained the old email address of Kumar Gala. Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Jesper Juhl authored
This is a small patch that adds loglevel to a printk in fs/afs/cmservice.c Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Jesper Juhl authored
Patch adds a mising printk loglevel (I think KERN_WARNING is appropriate here) in fs/binfmt_elf.c, and while I was there I made some tiny tiny tiny adjustments to whitespacing in the neighborhood. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Jesper Juhl authored
in mm/swapfile.c a printk() is missing a loglevel. I believe the proper loglevel for this situation is KERN_ERR, so that's what the patch below sets -if you agree, please apply. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
Jesper Juhl authored
Here's a tiny patch making a few esthetic changes to Documentation/laptop-mode.txt To me this patch makes sense, but feel free to disagree, I don't feel strongly about it at all. It changes a single URL to its strictly correct form (directories should end in /), and it makes the arguments to main in an included example program follow convention and be named argc and argv. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-