- 01 Nov, 2011 40 commits
-
-
Thomas Hellstrom authored
Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
This will allow us to attach various properties specific to virtual monitors in the future. Note that we don't export an EDID property for "Virtual" connectors. Signed-off-by:
-
Linus Torvalds authored
Quoth Andrew: - Most of MM. Still waiting for the poweroc guys to get off their butts and review some threaded hugepages patches. - alpha - vfs bits - drivers/misc - a few core kerenl tweaks - printk() features - MAINTAINERS updates - backlight merge - leds merge - various lib/ updates - checkpatch updates * akpm: (127 commits) epoll: fix spurious lockdep warnings checkpatch: add a --strict check for utf-8 in commit logs kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete llist-return-whether-list-is-empty-before-adding-in-llist_add-fix wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack fat: follow rename pack_hex_byte() to hex_byte_pack() security: follow rename pack_hex_byte() to hex_byte_pack() kgdb: follow rename pack_hex_byte() to hex_byte_pack() lib: rename pack_hex_byte() to hex_byte_pack() lib/string.c: fix strim() semantics for strings that have only blanks lib/idr.c: fix comment for ida_get_new_above() lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef lib/bitmap.c: quiet sparse noise about address space lib/spinlock_debug.c: print owner on spinlock lockup lib/kstrtox: common code between kstrto*() and simple_strto*() functions drivers/leds/leds-lp5521.c: check if reset is successful leds: turn the blink_timer off before starting to blink leds: save the delay values after a successful call to blink_set() drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing drivers/leds/leds-lm3530.c: add __devexit_p where needed ...
-
Nelson Elhage authored
epoll can acquire recursively acquire ep->mtx on multiple "struct eventpoll"s at once in the case where one epoll fd is monitoring another epoll fd. This is perfectly OK, since we're careful about the lock ordering, but it causes spurious lockdep warnings. Annotate the recursion using mutex_lock_nested, and add a comment explaining the nesting rules for good measure. Recent versions of systemd are triggering this, and it can also be demonstrated with the following trivial test program: --------------------8<-------------------- int main(void) { int e1, e2; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create1(0); e2 = epoll_create1(0); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } --------------------8<-------------------- Reported-by:Paul Bolle <pebolle@tiscali.nl> Tested-by:
Nelson Elhage <nelhage@nelhage.com> Acked-by:
Jason Baron <jbaron@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Some find using utf-8 in commit logs inappropriate. Some patch commit logs contain unintended utf-8 characters when doing things like copy/pasting compilation output. Look for the start of any commit log by skipping initial lines that look like email headers and "From: " lines. Stop looking for utf-8 at the first signature line. Signed-off-by:
Joe Perches <joe@perches.com> Suggested-by:
-
Joe Perches authored
Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions and macros as obsolete. Update checkpatch to warn about their use. Signed-off-by:
-
Andrew Morton authored
clarify comment Cc: Huang Ying <ying.huang@intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Andy Shevchenko authored
As suggested by Andrew Morton in [1] there is better to have most significant part first in the function name. [1] https://lkml.org/lkml/2011/9/20/22 There is no functional change. Signed-off-by:
-
Michael Holzheu authored
Commit 84c95c9a ("string: on strstrip(), first remove leading spaces before running over str") improved the performance of the strim() function. Unfortunately this changed the semantics of strim() and broke my code. Before the patch it was possible to use strim() without using the return value for removing trailing spaces from strings that had either only blanks or only trailing blanks. Now this does not work any longer for strings that *only* have blanks. Before patch: " " -> "" (empty string) After patch: " " -> " " (no change) I think we should remove your patch to restore the old behavior. The description (lib/string.c): * Note that the first trailing whitespace is replaced with a %NUL-terminator => The first trailing whitespace of a string that only has whitespace characters is the first whitespace The patch restores the old strim() semantics. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Andre Goddard Rosa <andre.goddard@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Wang Sheng-Hui authored
Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Glauber Costa authored
These variables are only used when CONFIG_HOTPLUG_CPU is enabled, they are ifdef'ed everywhere else. So don't define them when CONFIG_HOTPLUG_CPU is not enabled. Signed-off-by:
Glauber Costa <glommer@parallels.com> Signed-off-by:
-
H Hartley Sweeten authored
__bitmap_parse() and __bitmap_parselist() both take a pointer to a kernel buffer as a parameter and then cast it to a pointer to user buffer for use in cases when the parameter is_user indicates that the buffer is actually located in user space. This casting, and the casts in the callers, results in sparse noise like the following: warning: incorrect type in initializer (different address spaces) expected char const [noderef] <asn:1>*ubuf got char const *buf warning: cast removes address space of expression Since these casts are intentional, use __force to quiet the noise. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Len Brown <len.brown@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Akinobu Mita authored
When SPIN_BUG_ON is triggered, the lock owner information is reported. But it is omitted when spinlock lockup is detected. This information is useful especially on the architectures which don't implement trigger_all_cpu_backtrace() that is called just after detecting lockup. So report it and also avoid message format duplication. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
Currently termination logic (\0 or \n\0) is hardcoded in _kstrtoull(), avoid that for code reuse between kstrto*() and simple_strtoull(). Essentially, make them different only in termination logic. simple_strtoull() (and scanf(), BTW) ignores integer overflow, that's a bug we currently don't have guts to fix, making KSTRTOX_OVERFLOW hack necessary. Almost forgot: patch shrinks code size by about ~80 bytes on x86_64. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Srinidhi KASAGAR authored
Make sure that the reset is successful by issuing a dummy read to R channel current register and check its default value. On some platforms, without this dummy read, any further access to {R/G/B}_EXEC will not have any impact. [akpm@linux-foundation.org: fix up code comment] Signed-off-by:srinidhi kasagar <srinidhi.kasagar@stericsson.com> Tested-by:
Naga Radhesh <naga.radheshy@stericsson.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by:
-
Antonio Ospite authored
Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Antonio Ospite authored
When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by:
-
David Daney authored
I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Axel Lin authored
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for lm3530_remove(), so add __devexit_p to the `struct i2c_driver'. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
-
Axel Lin authored
If lp5521_read fails, engine_state variable is not initialized. If lp5521_read fails, we should return error. This patch fixes below warning. CC drivers/leds/leds-lp5521.o drivers/leds/leds-lp5521.c: In function 'lp5521_set_engine_mode': drivers/leds/leds-lp5521.c:168: warning: 'engine_state' may be used uninitialized in this function [akpm@linux-foundation.org: remove unneeded "ret |="] Signed-off-by:
-
Magnus Damm authored
Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by:
Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Magnus Damm authored
Use a workqueue in the Renesas TPU LED driver to allow the Runtime PM code to sleep. Signed-off-by:
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Masakazu Mokuno authored
The memory for struct led_trigger should be kfreed in the led_trigger_register() error path. Also this function should return NULL on error. Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Magnus Damm authored
Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by:
-
Axel Lin authored
The rename of corgibl_limit_intensity is missed in commit d00ba726 ("backlight: Rename the corgi backlight driver to generic"). Let's fix it now. Signed-off-by:
-
Fabio Estevam authored
Using gpio_request_one can make the error handling simpler. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Mark Brown authored
The regulator support in the l4f00242t03 is very non-idiomatic. Rather than requesting the regulators based on the device name and the supply names used by the device the driver requires boards to pass system specific supply names around through platform data. The driver also conditionally requests the regulators based on this platform data, adding unneeded conditional code to the driver. Fix this by removing the platform data and converting to the standard idiom, also updating all in tree users of the driver. As no datasheet appears to be available for the LCD I'm guessing the names for the supplies based on the existing users and I've no ability to do anything more than compile test. The use of regulator_set_voltage() in the driver is also problematic, since fixed voltages are required the expectation would be that the voltages would be fixed in the constraints set by the machines rather than manually configured by the driver, but is less problematic. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by:
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by:
-
Jiri Kosina authored
Since achieving the full ASLR by merging the PIE randomization in commit cc503c1b ("x86: PIE executable randomization"), I have been dealing with most (if not all) of the bugreports reported against userspace address space randomization, so it might be a good idea to provide a decent contact point in MAINTAINERS. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Linas Vepstas authored
While ego surfing, I noticed an email address problem. Signed-off-by:
Linas Vepstas <linasvepstas@gmail.com> Signed-off-by:
-
Ike Panhc authored
Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Joe Perches authored
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: -
William Douglas authored
Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). Since the code being updated works because strtoul bombs out (endp isn't updated) and 0 is returned anyway just remove the check and don't change the behavior of the function. Signed-off-by:
William Douglas <william.douglas@intel.com> Signed-off-by:
-
William Douglas authored
Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). It should be testing to see if the character less than '0' or greater than '9' instead. This patch makes that change. The code being changed worked because strtoul bombs out (endp isn't updated) and 0 is returned anyway. Signed-off-by:
-
Yanmin Zhang authored
We are enabling some power features on medfield. To test suspend-2-RAM conveniently, we need turn on/off console_suspend_enabled frequently. Add a module parameter, so users could change it by: /sys/module/printk/parameters/console_suspend Signed-off-by:
Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by:
-
