1. 25 Apr, 2015 2 commits
    • Michael Ellerman's avatar
      ehea: Fix memory hook reference counting crashes · 3051f392
      Michael Ellerman authored
      The recent commit to only register the EHEA memory hotplug hooks on
      adapter probe has a few problems.
      
      Firstly the reference counting is wrong for multiple adapters, in that
      the hooks are registered multiple times. Secondly the check in the tear
      down path is backward. Finally the error path doesn't decrement the
      count.
      
      The multiple registration of the hooks is the biggest problem, as it
      leads to oopses when the system is rebooted, and/or errors during memory
      hotplug, eg:
      
        $ ./mem-on-off-test.sh -r 2
        ...
        ehea: memory is going offline
        ehea: LPAR memory changed - re-initializing driver
        ehea: re-initializing driver complete
        ehea: memory is going offline
        ehea: LPAR memory changed - re-initializing driver
        ehea: opcode=26c ret=fffffffffffffffc arg1=8000000003000003 arg2=0 arg3=700000060000d600 arg4=3fded0000 arg5=200 arg6=0 arg7=0
        ehea: register_rpage_mr failed
        ehea: registering mr failed
        ehea: register MR failed - driver inoperable!
        ehea: memory is going offline
      
      Fixes: aa183323 ("ehea: Register memory hotplug, reboot and crash hooks on adapter probe")
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3051f392
    • Gavin Shan's avatar
      net/tg3: Release IRQs on permanent error · dfc8f370
      Gavin Shan authored
      When having permanent EEH error, the PCI device will be removed
      from the system. For this case, we shouldn't set pcierr_recovery
      to true wrongly, which blocks the driver to release the allocated
      interrupts and their handlers. Eventually, we can't disable MSI
      or MSIx successfully because of the MSI or MSIx interrupts still
      have associated interrupt actions, which is turned into following
      stack dump.
      
      Oops: Exception in kernel mode, sig: 5 [#1]
              :
      [c0000000003b76a8] .free_msi_irqs+0x80/0x1a0 (unreliable)
      [c00000000039f388] .pci_remove_bus_device+0x98/0x110
      [c0000000000790f4] .pcibios_remove_pci_devices+0x9c/0x128
      [c000000000077b98] .handle_eeh_events+0x2d8/0x4b0
      [c0000000000782d0] .eeh_event_handler+0x130/0x1c0
      [c000000000022bd4] .kernel_thread+0x54/0x70
      Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
      Acked-by: default avatarPrashant Sreedharan <prashant@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dfc8f370
  2. 24 Apr, 2015 5 commits
    • Vivien Didelot's avatar
      net: mdio-gpio: support access that may sleep · 2d6c9091
      Vivien Didelot authored
      Some systems using mdio-gpio may use gpio on message based busses, which
      require sleeping (e.g. gpio from an I2C I/O expander).
      
      Since this driver does not use IRQ handler, it is safe to use the
      _cansleep suffixed gpio accessors.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2d6c9091
    • Eric Dumazet's avatar
      inet: fix possible panic in reqsk_queue_unlink() · b357a364
      Eric Dumazet authored
      [ 3897.923145] BUG: unable to handle kernel NULL pointer dereference at
       0000000000000080
      [ 3897.931025] IP: [<ffffffffa9f27686>] reqsk_timer_handler+0x1a6/0x243
      
      There is a race when reqsk_timer_handler() and tcp_check_req() call
      inet_csk_reqsk_queue_unlink() on the same req at the same time.
      
      Before commit fa76ce73 ("inet: get rid of central tcp/dccp listener
      timer"), listener spinlock was held and race could not happen.
      
      To solve this bug, we change reqsk_queue_unlink() to not assume req
      must be found, and we return a status, to conditionally release a
      refcount on the request sock.
      
      This also means tcp_check_req() in non fastopen case might or not
      consume req refcount, so tcp_v6_hnd_req() & tcp_v4_hnd_req() have
      to properly handle this.
      
      (Same remark for dccp_check_req() and its callers)
      
      inet_csk_reqsk_queue_drop() is now too big to be inlined, as it is
      called 4 times in tcp and 3 times in dccp.
      
      Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b357a364
    • Johannes Berg's avatar
      rhashtable: don't attempt to grow when at max_size · 1d8dc3d3
      Johannes Berg authored
      The conversion of mac80211's station table to rhashtable had a bug
      that I found by accident in code review, that hadn't been found as
      rhashtable apparently managed to have a maximum hash chain length
      of one (!) in all our testing.
      
      In order to test the bug and verify the fix I set my rhashtable's
      max_size very low (4) in order to force getting hash collisions.
      
      At that point, rhashtable WARNed in rhashtable_insert_rehash() but
      didn't actually reject the hash table insertion. This caused it to
      lose insertions - my master list of stations would have 9 entries,
      but the rhashtable only had 5. This may warrant a deeper look, but
      that WARN_ON() just shouldn't happen.
      
      Fix this by not returning true from rht_grow_above_100() when the
      rhashtable's max_size has been reached - in this case the user is
      explicitly configuring it to be at most that big, so even if it's
      now above 100% it shouldn't attempt to resize.
      
      This fixes the "lost insertion" issue and consequently allows my
      code to display its error (and verify my fix for it.)
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Acked-by: default avatarThomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d8dc3d3
    • Rafał Miłecki's avatar
      bgmac: fix requests for extra polling calls from NAPI · e580267d
      Rafał Miłecki authored
      After d75b1ade ("net: less interrupt masking in NAPI") polling
      function has to return whole budget when it wants NAPI to call it again.
      Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
      Cc: Felix Fietkau <nbd@openwrt.org>
      Fixes: eb64e292 ("bgmac: leave interrupts disabled as long as there is work to do")
      Acked-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e580267d
    • Eric Dumazet's avatar
      tcp: avoid looping in tcp_send_fin() · 845704a5
      Eric Dumazet authored
      Presence of an unbound loop in tcp_send_fin() had always been hard
      to explain when analyzing crash dumps involving gigantic dying processes
      with millions of sockets.
      
      Lets try a different strategy :
      
      In case of memory pressure, try to add the FIN flag to last packet
      in write queue, even if packet was already sent. TCP stack will
      be able to deliver this FIN after a timeout event. Note that this
      FIN being delivered by a retransmit, it also carries a Push flag
      given our current implementation.
      
      By checking sk_under_memory_pressure(), we anticipate that cooking
      many FIN packets might deplete tcp memory.
      
      In the case we could not allocate a packet, even with __GFP_WAIT
      allocation, then not sending a FIN seems quite reasonable if it allows
      to get rid of this socket, free memory, and not block the process from
      eventually doing other useful work.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      845704a5
  3. 23 Apr, 2015 11 commits
    • Luis R. Rodriguez's avatar
      ethernet: myri10ge: use arch_phys_wc_add() · e4b6c303
      Luis R. Rodriguez authored
      This driver already uses ioremap_wc() on the same range
      so when write-combining is available that will be used
      instead.
      
      Cc: Hyong-Youb Kim <hykim@myri.com>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Suresh Siddha <sbsiddha@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: netdev@vger.kernel.org
      Cc: Juergen Gross <jgross@suse.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Dave Airlie <airlied@redhat.com>
      Cc: Antonino Daplas <adaplas@gmail.com>
      Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: netdev@vger.kernel.org
      Signed-off-by: default avatarLuis R. Rodriguez <mcgrof@suse.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4b6c303
    • Geert Uytterhoeven's avatar
      can: CAN_GRCAN should depend on HAS_DMA · 2fb42aab
      Geert Uytterhoeven authored
      If NO_DMA=y:
      
          drivers/built-in.o: In function `grcan_free_dma_buffers':
          grcan.c:(.text+0x2d7716): undefined reference to `dma_free_coherent'
          drivers/built-in.o: In function `grcan_allocate_dma_buffers':
          grcan.c:(.text+0x2d779c): undefined reference to `dma_alloc_coherent'
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2fb42aab
    • Geert Uytterhoeven's avatar
      ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMA · 0357cc1d
      Geert Uytterhoeven authored
      If NO_DMA=y:
      
          drivers/built-in.o: In function `arc_emac_tx_clean':
          emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single'
          drivers/built-in.o: In function `arc_emac_rx':
          emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single'
          emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single'
          emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error'
          drivers/built-in.o: In function `arc_emac_probe':
          (.text+0x2df2ee): undefined reference to `dmam_alloc_coherent'
          drivers/built-in.o: In function `arc_emac_open':
          emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single'
          emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error'
          drivers/built-in.o: In function `arc_emac_tx':
          emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single'
          emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error'
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0357cc1d
    • Geert Uytterhoeven's avatar
      ethernet: amd: AMD_XGBE should depend on HAS_DMA · 61e77d29
      Geert Uytterhoeven authored
      If NO_DMA=y:
      
          drivers/built-in.o: In function `xgbe_probe':
          xgbe-main.c:(.text+0x2def0a): undefined reference to `dma_set_mask'
          xgbe-main.c:(.text+0x2def20): undefined reference to `dma_supported'
          drivers/built-in.o: In function `xgbe_rx_poll':
          xgbe-drv.c:(.text+0x2e0320): undefined reference to `dma_sync_single_for_cpu'
          xgbe-drv.c:(.text+0x2e035e): undefined reference to `dma_sync_single_for_cpu'
          drivers/built-in.o: In function `xgbe_unmap_rdata':
          xgbe-desc.c:(.text+0x2e5fe4): undefined reference to `dma_unmap_page'
          xgbe-desc.c:(.text+0x2e5ffa): undefined reference to `dma_unmap_single'
          xgbe-desc.c:(.text+0x2e604a): undefined reference to `dma_unmap_page'
          xgbe-desc.c:(.text+0x2e6084): undefined reference to `dma_unmap_page'
          drivers/built-in.o: In function `xgbe_alloc_pages':
          xgbe-desc.c:(.text+0x2e6156): undefined reference to `dma_map_page'
          xgbe-desc.c:(.text+0x2e6164): undefined reference to `dma_mapping_error'
          drivers/built-in.o: In function `xgbe_free_ring':
          xgbe-desc.c:(.text+0x2e63d4): undefined reference to `dma_unmap_page'
          xgbe-desc.c:(.text+0x2e640e): undefined reference to `dma_unmap_page'
          xgbe-desc.c:(.text+0x2e644a): undefined reference to `dma_free_coherent'
          drivers/built-in.o: In function `xgbe_init_ring':
          xgbe-desc.c:(.text+0x2e64d4): undefined reference to `dma_alloc_coherent'
          drivers/built-in.o: In function `xgbe_map_tx_skb':
          xgbe-desc.c:(.text+0x2e6628): undefined reference to `dma_map_single'
          xgbe-desc.c:(.text+0x2e6638): undefined reference to `dma_mapping_error'
          xgbe-desc.c:(.text+0x2e66b2): undefined reference to `dma_map_single'
          xgbe-desc.c:(.text+0x2e66c2): undefined reference to `dma_mapping_error'
          xgbe-desc.c:(.text+0x2e6762): undefined reference to `dma_map_page'
          xgbe-desc.c:(.text+0x2e6772): undefined reference to `dma_mapping_error'
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61e77d29
    • Jason Eastman's avatar
      net: unix: garbage: fixed several comment and whitespace style issues · d1ab39f1
      Jason Eastman authored
      fixed several comment and whitespace style issues
      Signed-off-by: default avatarJason Eastman <eastman.jason.linux@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d1ab39f1
    • David S. Miller's avatar
      Merge branch 'tipc-fixes' · 37a06a87
      David S. Miller authored
      Jon Maloy says:
      
      ====================
      tipc: three bug fixes
      
      A set of unrelated corrections; one for the tipc netns implementation,
      one regarding problems with random link resets, and one removing a
      an erroneous refcount decrement when reading link statistsics via
      netlink.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37a06a87
    • Erik Hugne's avatar
      tipc: fix node refcount issue · 73a31737
      Erik Hugne authored
      When link statistics is dumped over netlink, we iterate over
      the list of peer nodes and append each links statistics to
      the netlink msg. In the case where the dump is resumed after
      filling up a nlmsg, the node refcnt is decremented without
      having been incremented previously which may cause the node
      reference to be freed. When this happens, the following
      info/stacktrace will be generated, followed by a crash or
      undefined behavior.
      We fix this by removing the erroneous call to tipc_node_put
      inside the loop that iterates over nodes.
      
      [  384.312303] INFO: trying to register non-static key.
      [  384.313110] the code is fine but needs lockdep annotation.
      [  384.313290] turning off the locking correctness validator.
      [  384.313290] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.0.0+ #13
      [  384.313290] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      [  384.313290]  ffff88003c6d0290 ffff88003cc03ca8 ffffffff8170adf1 0000000000000007
      [  384.313290]  ffffffff82728730 ffff88003cc03d38 ffffffff810a6a6d 00000000001d7200
      [  384.313290]  ffff88003c6d0ab0 ffff88003cc03ce8 0000000000000285 0000000000000001
      [  384.313290] Call Trace:
      [  384.313290]  <IRQ>  [<ffffffff8170adf1>] dump_stack+0x4c/0x65
      [  384.313290]  [<ffffffff810a6a6d>] __lock_acquire+0xf3d/0xf50
      [  384.313290]  [<ffffffff810a7375>] lock_acquire+0xd5/0x290
      [  384.313290]  [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc]
      [  384.313290]  [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc]
      [  384.313290]  [<ffffffff81712890>] _raw_spin_lock_bh+0x40/0x80
      [  384.313290]  [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc]
      [  384.313290]  [<ffffffffa0043e8c>] link_timeout+0x1c/0x170 [tipc]
      [  384.313290]  [<ffffffff810c4698>] call_timer_fn+0xb8/0x490
      [  384.313290]  [<ffffffff810c45e0>] ? process_timeout+0x10/0x10
      [  384.313290]  [<ffffffff810c5a2c>] run_timer_softirq+0x21c/0x420
      [  384.313290]  [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc]
      [  384.313290]  [<ffffffff8105a954>] __do_softirq+0xf4/0x630
      [  384.313290]  [<ffffffff8105afdd>] irq_exit+0x5d/0x60
      [  384.313290]  [<ffffffff8103ade1>] smp_apic_timer_interrupt+0x41/0x50
      [  384.313290]  [<ffffffff817144a0>] apic_timer_interrupt+0x70/0x80
      [  384.313290]  <EOI>  [<ffffffff8100db10>] ? default_idle+0x20/0x210
      [  384.313290]  [<ffffffff8100db0e>] ? default_idle+0x1e/0x210
      [  384.313290]  [<ffffffff8100e61a>] arch_cpu_idle+0xa/0x10
      [  384.313290]  [<ffffffff81099803>] cpu_startup_entry+0x2c3/0x530
      [  384.313290]  [<ffffffff810d2893>] ? clockevents_register_device+0x113/0x200
      [  384.313290]  [<ffffffff81038b0f>] start_secondary+0x13f/0x170
      
      Fixes: 8a0f6ebe ("tipc: involve reference counter for node structure")
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      73a31737
    • Erik Hugne's avatar
      tipc: fix random link reset problem · 9871b27f
      Erik Hugne authored
      In the function tipc_sk_rcv(), the stack variable 'err'
      is only initialized to TIPC_ERR_NO_PORT for the first
      iteration over the link input queue. If a chain of messages
      are received from a link, failure to lookup the socket for
      any but the first message will cause the message to bounce back
      out on a random link.
      We fix this by properly initializing err.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9871b27f
    • Ying Xue's avatar
      tipc: fix topology server broken issue · def81f69
      Ying Xue authored
      When a new topology server is launched in a new namespace, its
      listening socket is inserted into the "init ns" namespace's socket
      hash table rather than the one owned by the new namespace. Although
      the socket's namespace is forcedly changed to the new namespace later,
      the socket is still stored in the socket hash table of "init ns"
      namespace. When a client created in the new namespace connects
      its own topology server, the connection is failed as its server's
      socket could not be found from its own namespace's socket table.
      
      If __sock_create() instead of original sock_create_kern() is used
      to create the server's socket through specifying an expected namesapce,
      the socket will be inserted into the specified namespace's socket
      table, thereby avoiding to the topology server broken issue.
      
      Fixes: 76100a8a ("tipc: fix netns refcnt leak")
      Reported-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      def81f69
    • David Gibson's avatar
      ibmveth: Fix off-by-one error in ibmveth_change_mtu() · 4fce1482
      David Gibson authored
      AFAIK the PAPR document which defines the virtual device interface used by
      the ibmveth driver doesn't specify a specific maximum MTU.  So, in the
      ibmveth driver, the maximum allowed MTU is determined by the maximum
      allocated buffer size of 64k (corresponding to one page in the common case)
      minus the per-buffer overhead IBMVETH_BUFF_OH (which has value 22 for 14
      bytes of ethernet header, plus 8 bytes for an opaque handle).
      
      This suggests a maximum allowable MTU of 65514 bytes, but in fact the
      driver only permits a maximum MTU of 65513.  This is because there is a <
      instead of an <= in ibmveth_change_mtu(), which only permits an MTU which
      is strictly smaller than the buffer size, rather than allowing the buffer
      to be completely filled.
      
      This patch fixes the buglet.
      Signed-off-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      Acked-by: default avatarThomas Falcon <tlfalcon@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fce1482
    • Johannes Berg's avatar
      netdev_alloc_pcpu_stats: use less common iterator variable · ec65aafb
      Johannes Berg authored
      With the CPU iteration variable called 'i', it's relatively easy
      to have variable shadowing which sparse will warn about. Avoid
      that by renaming the variable to __cpu which is less likely to
      be used in the surrounding context.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec65aafb
  4. 22 Apr, 2015 22 commits
    • Li RongQing's avatar
      vxlan: remove the unnecessary codes · 60840429
      Li RongQing authored
      The return value of vxlan_fdb_replace always is greater than or equal to 0
      Signed-off-by: default avatarLi RongQing <roy.qing.li@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      60840429
    • Ben Shelton's avatar
      net/macb: Factor out one-time assignment from loop · 21d3515c
      Ben Shelton authored
      In 02c958dd (net/macb: add TX multiqueue support for gem), the
      initialization of tx_head and tx_tail in macb_init_rings() was moved
      inside the loop that iterates over each element in the ring.  Since
      tx_head and tx_tail only need to be assigned once, move them back out of
      the loop.
      Signed-off-by: default avatarBen Shelton <ben.shelton@ni.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21d3515c
    • Eric Dumazet's avatar
      net: do not deplete pfmemalloc reserve · 79930f58
      Eric Dumazet authored
      build_skb() should look at the page pfmemalloc status.
      If set, this means page allocator allocated this page in the
      expectation it would help to free other pages. Networking
      stack can do that only if skb->pfmemalloc is also set.
      
      Also, we must refrain using high order pages from the pfmemalloc
      reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for
      them. Under memory pressure, using order-0 pages is probably the best
      strategy.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79930f58
    • Johannes Berg's avatar
      ip6_gre: use netdev_alloc_pcpu_stats() · 26349c71
      Johannes Berg authored
      The code there just open-codes the same, so use the provided macro instead.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26349c71
    • David S. Miller's avatar
      Merge branch 'mpls' · 0e2d6865
      David S. Miller authored
      Robert Shearman says:
      
      ====================
      mpls: ABI changes for security and correctness
      
      V2:
       - don't treat loopback interfaces specially by enabling mpls by
         default
      
      These changes make mpls not be enabled by default on all
      interfaces when in use for security, along with ensuring that a label
      not valid as an outgoing label can be added in mpls routes.
      
      This series contains three ABI/behaviour-affecting changes which have
      been split out from "[PATCH net-next v4 0/6] mpls: Behaviour-changing
      improvements" without any further modification. These changes need to
      be considered for 4.1 otherwise we'll be stuck with the current
      behaviour/ABI forever.
      ====================
      Reviewed-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e2d6865
    • Robert Shearman's avatar
      mpls: Prevent use of implicit NULL label as outgoing label · 5a9ab017
      Robert Shearman authored
      The reserved implicit-NULL label isn't allowed to appear in the label
      stack for packets, so make it an error for the control plane to
      specify it as an outgoing label.
      Suggested-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarRobert Shearman <rshearma@brocade.com>
      Reviewed-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a9ab017
    • Robert Shearman's avatar
      mpls: Per-device enabling of packet input · 37bde799
      Robert Shearman authored
      An MPLS network is a single trust domain where the edges must be in
      control of what labels make their way into the core. The simplest way
      of ensuring this is for the edge device to always impose the labels,
      and not allow forward labeled traffic from untrusted neighbours. This
      is achieved by allowing a per-device configuration of whether MPLS
      traffic input from that interface should be processed or not.
      
      To be secure by default, the default state is changed to MPLS being
      disabled on all interfaces unless explicitly enabled and no global
      option is provided to change the default. Whilst this differs from
      other protocols (e.g. IPv6), network operators are used to explicitly
      enabling MPLS forwarding on interfaces, and with the number of links
      to the MPLS core typically fairly low this doesn't present too much of
      a burden on operators.
      
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarRobert Shearman <rshearma@brocade.com>
      Reviewed-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37bde799
    • Robert Shearman's avatar
      mpls: Per-device MPLS state · 03c57747
      Robert Shearman authored
      Add per-device MPLS state to supported interfaces. Use the presence of
      this state in mpls_route_add to determine that this is a supported
      interface.
      
      Use the presence of mpls_dev to drop packets that arrived on an
      unsupported interface - previously they were allowed through.
      
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarRobert Shearman <rshearma@brocade.com>
      Reviewed-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03c57747
    • Yuval Mintz's avatar
      bnx2x: Prevent inner-reload while VFs exist · 909d9faa
      Yuval Mintz authored
      On some feature changes, driver employes an inner-reload flow where it
      resets the function and re-configures it with the new required set of
      parameters.
      
      Such a flow proves fatal to any VF since those were not intended to be used
      while HW is being reset underneath, causing them [at best] to lose all
      connectivity.
      
      This changes driver behavior to fail all configuration changes [e.g., mtu
      change] requested of the driver in case VFs are active.
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarAriel Elior <Ariel.Elior@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      909d9faa
    • David S. Miller's avatar
      Merge branch 'rhashtable-fixes' · a2c3935a
      David S. Miller authored
      Thomas Graf says:
      
      ====================
      rhashtable rehashing fixes
      
      Some rhashtable rehashing bugs found while testing with the
      next rhashtable self-test queued up for the next devel cycle:
      
      https://github.com/tgraf/net-next/commits/rht
      
      v2:
       - Moved schedule_work() call into rhashtable_insert_rehash()
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2c3935a
    • Thomas Graf's avatar
      rhashtable: Do not schedule more than one rehash if we can't grow further · a87b9ebf
      Thomas Graf authored
      The current code currently only stops inserting rehashes into the
      chain when no resizes are currently scheduled. As long as resizes
      are scheduled and while inserting above the utilization watermark,
      more and more rehashes will be scheduled.
      
      This lead to a perfect DoS storm with thousands of rehashes
      scheduled which lead to thousands of spinlocks to be taken
      sequentially.
      
      Instead, only allow either a series of resizes or a single rehash.
      Drop any further rehashes and return -EBUSY.
      
      Fixes: ccd57b1b ("rhashtable: Add immediate rehash during insertion")
      Signed-off-by: default avatarThomas Graf <tgraf@suug.ch>
      Acked-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a87b9ebf
    • Thomas Graf's avatar
      rhashtable: Schedule async resize when sync realloc fails · e2307ed6
      Thomas Graf authored
      When rhashtable_insert_rehash() fails with ENOMEM, this indicates that
      we can't allocate the necessary memory in the current context but the
      limits as set by the user would still allow to grow.
      
      Thus attempt an async resize in the background where we can allocate
      using GFP_KERNEL which is more likely to succeed. The insertion itself
      will still fail to indicate pressure.
      
      This fixes a bug where the table would never continue growing once the
      utilization is above 100%.
      
      Fixes: ccd57b1b ("rhashtable: Add immediate rehash during insertion")
      Signed-off-by: default avatarThomas Graf <tgraf@suug.ch>
      Acked-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2307ed6
    • Eric Dumazet's avatar
      tcp: fix possible deadlock in tcp_send_fin() · d83769a5
      Eric Dumazet authored
      Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in
      case a huge process is killed by OOM, and tcp_mem[2] is hit.
      
      To be able to free memory we need to make progress, so this
      patch allows FIN packets to not care about tcp_mem[2], if
      skb allocation succeeded.
      
      In a follow-up patch, we might abort tcp_send_fin() infinite loop
      in case TIF_MEMDIE is set on this thread, as memory allocator
      did its best getting extra memory already.
      
      This patch reverts d22e1537 ("tcp: fix tcp fin memory accounting")
      
      Fixes: d22e1537 ("tcp: fix tcp fin memory accounting")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d83769a5
    • Linus Torvalds's avatar
      Merge tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmc · 5e6c94a9
      Linus Torvalds authored
      Pull MMC fixes from Ulf Hansson:
       "Here is two mmc core fixes for v.4.1 rc1:
      
         - fix error code propagation in mmc_pwrseq_simple_alloc()
      
         - revert 'mmc: core: Convert mmc_driver to device_driver'"
      
      * tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
        Revert "mmc: core: Convert mmc_driver to device_driver"
        mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()
      5e6c94a9
    • Vinod Koul's avatar
      dmaengine: hsu: don't prompt for hsu_core part · 3cfe2137
      Vinod Koul authored
      HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected
      so remove the user prompt for this
      Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3cfe2137
    • Linus Torvalds's avatar
      Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 8b3c8ba3
      Linus Torvalds authored
      Pull ARM SoC late changes from Olof Johansson:
       "We were expecting to sit on this branch through most of the merge
        window since the contents was merged into our tree late, but we ended
        up sitting on all of our contents so it can go in with the rest.
      
        The contents here is:
      
         - a large branch of cleanups of the CM/PRM blocks on OMAP.
      
         - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.
      
         - a branch with DT updates for Freescale i.MX.  including some
           shuffling from .dts to .dtsi (include) files that causes a little
           churn"
      
      * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
        ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
        ARM: OMAP4+: control: add support for initializing control module via DT
        ARM: dts: dra7: add minimal l4 bus layout with control module support
        ARM: dts: omap5: add minimal l4 bus layout with control module support
        ARM: OMAP4+: control: remove support for legacy pad read/write
        ARM: OMAP4: display: convert display to use syscon for dsi muxing
        ARM: dts: omap4: add minimal l4 bus layout with control module support
        ARM: dts: am4372: add minimal l4 bus layout with control module support
        ARM: dts: am43xx-epos-evm: fix pinmux node layout
        ARM: dts: am33xx: add minimal l4 bus layout with control module support
        ARM: dts: omap3: add minimal l4 bus layout with control module support
        ARM: dts: omap24xx: add minimal l4 bus layout with control module support
        ARM: OMAP2+: control: add syscon support for register accesses
        ARM: OMAP2+: id: cache omap_type value
        ARM: OMAP2+: control: remove API for getting control module base address
        ARM: OMAP2+: clock: add low-level support for regmap
        ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
        ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
        ARM: OMAP2+: CM: move SoC specific init calls within a generic API
        ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
        ...
      8b3c8ba3
    • Linus Torvalds's avatar
      Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · d34dc4f9
      Linus Torvalds authored
      Pull ARM SoC 64-bit changes from Olof Johansson:
       "Mostly DT updates for arm64, but also a couple of Kconfig additions.
      
        Main contents:
      
         - Qualcomm MSM8916/APQ8016
      
         - Spreadtrum SC9836
      
         - Xilinx ZynqMP
      
         - pincontrol entries for MediaTek MT8173"
      
      * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        arm64: dts: add interrupt-affinity property to pmu node for juno
        arm64: dts: Add Qualcomm APQ8016 SBC evaluation board dts
        arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts
        arm64: dts: sprd: adding coresight entries to Spreadtrum SC9836
        arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig
        arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
        ARM64: Add new Xilinx ZynqMP SoC
        arm64: qcom: Add support for Qualcomm MSM8916 SoC
        arm64: dts: mt8173: Add pinctrl/GPIO/EINT node for mt8173.
        arm64: mediatek: Select PINCTRL for Mediatek platform
      d34dc4f9
    • Linus Torvalds's avatar
      Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 2144de82
      Linus Torvalds authored
      Pull ARM SoC defconfig updates from Olof Johansson:
       "We keep collecting defconfig updates in a separate branch mostly to
        encourage people to handle them separately and avoid conflicts between
        different topics.
      
        Most of these are enablement of new drivers that have come in, or
        minor config refreshes due to reorderings in Kconfig files, etc.  I.e.
        mostly minor churn of various kinds.
      
        We might start folding this branch into something else for upstream
        merge since it's so small, but keep it independent in our own tree for
        the above reasons"
      
      * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
        ARM: multi_v7_defconfig: enable alpine platform
        ARM: multi_v7_defconfig: Add gpio-restart driver
        ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module
        ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads
        ARM: multi_v7_defconfig: Enable Tegra ACTMON support
        ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
        ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
        ARM: exynos_defconfig: Enable HDMI support
        ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
        ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
        ARM: mvebu: Enable perf support in mvebu_v7_defconfig
        ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
        ARM: exynos_defconfig: Enable CPU idle
        ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
        arm: qcom: Update defconfig
        arm: qcom: Enable lpass clock driver in defconfig
        ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
        ARM: omap2plus_defconfig: Update bluetooth options
        ARM: omap2plus_defconfig: Enable leds-pwm
        ARM: omap1_defconfig: drop obsolete Kconfig symbols
        ...
      2144de82
    • Linus Torvalds's avatar
      Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · e5ac320d
      Linus Torvalds authored
      Pull ARM SoC multiplatform code changes from Olof Johansson:
       "The changes here belong to two main platforms:
      
         - Atmel At91 is flipping the bit and going multiplatform.  This
           includes some cleanups and removal of code, and the final flip of
           config dependencies
      
         - Shmobile has several platforms that are going multiplatform, but
           this branch also contains a bunch of cleanups that they weren't
           able to keep separate in a good way.  THere's also a removal of one
           of their SoCs and the corresponding boards (sh7372 and mackerel)"
      
      * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
        ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
        ARM: at91/pm: move the standby functions to pm.c
        ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
        ARM: at91: add a Kconfig dependency on multi-platform
        ARM: at91: drop AT91_TIMER_HZ
        ARM: at91: remove hardware.h
        ARM: at91: remove SoC headers
        ARM: at91: remove useless mach/cpu.h
        ARM: at91: remove unused headers
        ARM: at91: switch at91_dt_defconfig to multiplatform
        ARM: at91: switch to multiplatform
        ARM: shmobile: r8a7778: enable multiplatform target
        ARM: shmobile: bockw: add sound to DT
        ARM: shmobile: r8a7778: add sound to DT
        ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
        DT: i2c: add trivial binding for OKI ML86V7667 video decoder
        ARM: shmobile: r8a7778: common clock framework CPG driver
        ARM: shmobile: bockw dts: set extal clock frequency
        ARM: shmobile: bockw dts: Move Ethernet node to BSC
        ARM: shmobile: r8a73a4: Remove legacy code
        ...
      e5ac320d
    • Linus Torvalds's avatar
      Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 7d2b6ef1
      Linus Torvalds authored
      Pull ARM SoC driver updates from Olof Johansson:
       "Driver updates for v4.1.  Some of these are for drivers/soc, where we
        find more and more SoC-specific drivers these days.  Some are for
        other driver subsystems where we have received acks from the
        appropriate maintainers.
      
        The larger parts of this branch are:
      
         - MediaTek support for their PMIC wrapper interface, a high-level
           interface for talking to the system PMIC over a dedicated I2C
           interface.
      
         - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
           for CPU up/down and needs to be in a shared location for arm/arm64
           common code.
      
         - cleanup of ARM-CCI PMU code.
      
         - another set of cleanusp to the OMAP GPMC code"
      
      * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
        soc/mediatek: Remove unused variables
        clocksource: atmel-st: select MFD_SYSCON
        soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
        arm-cci: Fix CCI PMU event validation
        arm-cci: Split the code for PMU vs driver support
        arm-cci: Get rid of secure transactions for PMU driver
        arm-cci: Abstract the CCI400 PMU specific definitions
        arm-cci: Rearrange code for splitting PMU vs driver code
        drivers: cci: reject groups spanning multiple HW PMUs
        ARM: at91: remove useless include
        clocksource: atmel-st: remove mach/hardware dependency
        clocksource: atmel-st: use syscon/regmap
        ARM: at91: time: move the system timer driver to drivers/clocksource
        ARM: at91: properly initialize timer
        ARM: at91: at91rm9200: remove deprecated arm_pm_restart
        watchdog: at91rm9200: implement restart handler
        watchdog: at91rm9200: use the system timer syscon
        mfd: syscon: Add atmel system timer registers definition
        ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
        soc: qcom: gsbi: Add support for ADM CRCI muxing
        ...
      7d2b6ef1
    • Linus Torvalds's avatar
      Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 5c73cc4b
      Linus Torvalds authored
      Pull ARM DT updates from Olof Johansson:
       "As always, this tends to be one of our bigger branches.  There are
        lots of updates this release, but not that many jumps out as something
        that needs more detailed coverage.  Some of the highlights are:
      
         - DTs for the new Annapurna Labs Alpine platform
      
         - more graphics DT pieces falling into place on Exynos, bridges,
           clocks.
      
         - plenty of DT updates for Qualcomm platforms for various IP blocks
      
         - some churn on Tegra due to switch-over to tool-generated pinctrl
           data
      
         - misc fixes and updates for Atmel at91 platforms
      
         - various DT updates to add IP block support on Broadcom's Cygnus
           platforms
      
         - more updates for Renesas platforms as DT support is added for
           various IP blocks (IPMMU, display, audio, etc)"
      
      * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
        ARM: dts: alpine: add internal pci
        Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
        ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
        ARM: dts: qcom: Add idle state device nodes for 8064
        ARM: dts: qcom: Add idle states device nodes for 8084
        ARM: dts: qcom: Add idle states device nodes for 8974/8074
        ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
        ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
        ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
        devicetree: bindings: Document qcom,idle-states
        devicetree: bindings: Update qcom,saw2 node bindings
        dt-bindings: Add #defines for MSM8916 clocks and resets
        arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
        arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
        arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
        arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
        arm: dts: qcom: Add LCC nodes
        arm: dts: qcom: Add TCSR support for MSM8960
        arm: dts: qcom: Add TCSR support for MSM8660
        arm: dts: qcom: Add TCSR support for IPQ8064
        ...
      5c73cc4b
    • Linus Torvalds's avatar
      Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · e6c81cce
      Linus Torvalds authored
      Pull ARM SoC platform updates from Olof Johansson:
       "Our SoC branch usually contains expanded support for new SoCs and
        other core platform code.  In this case, that includes:
      
         - support for the new Annapurna Labs "Alpine" platform
      
         - a rework greatly simplifying adding new platform support to the
           MCPM subsystem (Multi-cluster power management)
      
         - cpuidle and PM improvements for Exynos3250
      
         - misc updates for Renesas, OMAP, Meson, i.MX.  Some of these could
           have gone in other branches but ended up here for various reasons"
      
      * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
        ARM: alpine: add support for generic pci
        ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
        ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
        ARM: vexpress: DCSCB: tighten CPU validity assertion
        ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
        ARM: MCPM: move the algorithmic complexity to the core code
        ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
        ARM: EXYNOS: add AFTR mode support for Exynos3250
        ARM: EXYNOS: add code for setting/clearing boot flag
        ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
        ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
        ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
        ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
        ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
        ARM: EXYNOS: Remove left over 'extra_save'
        ARM: EXYNOS: Constify exynos_pm_data array
        ARM: EXYNOS: use static in suspend.c
        ARM: EXYNOS: Use platform device name as power domain name
        ARM: EXYNOS: add support for async-bridge clocks for pm_domains
        ARM: omap-device: add missed callback for suspend-to-disk
        ...
      e6c81cce