Add ipv6_ib_mc_map() to convert IPv6 multicast addresses to IPoIB
hardware addresses, and add support for autoconfiguration for devices
with type ARPHRD_INFINIBAND.

The mapping for multicast addresses is described in
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txtSigned-off-by: Nitin Hande <Nitin.Hande@Sun.Com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ip_ib_mc_map() to convert IPv4 multicast addresses to IPoIB
hardware addresses.  Also add <linux/if_infiniband.h> so INFINIBAND_ALEN
has a home.

The mapping for multicast addresses is described in
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txtSigned-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD (management datagram) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code for remaining InfiniBand objects (address vectors, multicast
groups, memory regions and protection domains)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add CQ (completion queue) and QP (queue pair) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add device initializaton code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add event queue code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add firmware command processing code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add midlayer interface code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a low-level driver for Mellanox MT23108 and MT25208 HCAs.  The
MT25208 is only fully supported when in MT23108 compatibility mode;
only the very beginnings of support for native MT25208 mode (required
for HCAs without local memory) is present.

(As a side note, I believe this driver would be the first in-tree
consumer of the PCI MSI/MSI-X API)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for sending queries to the SA (Subnet Administration).  In
particular the PathRecord and MCMember (multicast group member) used
by the IP-over-InfiniBand driver are implemented.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer SMI (Subnet Management Interface) code.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer private implementation headers.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for handling InfiniBand MADs (management datagrams),
including sending and receiving MADs as well as passing MADs on to
local agents.

This is required for an SM (subnet manager) to discover and configure
the host, since the SM's query MADs must be passed to the local SMA
(subnet management agent).  In addition, this support is used by upper
level protocols to send queries to and receive responses from the SM.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for handling InfiniBand MADs (management
datagrams), including sending and receiving MADs as well as passing
MADs on to local agents.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the appropriate lines to drivers/Kconfig and drivers/Makefile so
that the kernel configuration and build systems know about drivers/infiniband.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add implementation of core InfiniBand support.  This can be thought of
as a midlayer that provides an abstraction between low-level hardware
drivers and upper level protocols (such as IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for core InfiniBand support.  This can be thought
of as a midlayer that provides an abstraction between low-level
hardware drivers and upper level protocols (such as
IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Originally submitted by Mike Waychison <Michael.Waychison@sun.com> in
August but apparently lost.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

SCSI ioctls can ask for a lot of memory and fail. We don't need to vomit
in the log file for this case. Again taken from the Red Hat minor
patches applied for FC3.

Original-patch: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Paul Laufer informed the list that he had changed address and his change
of address had been ignored so CREDITS was still wrong although other
files had been updated.

Fix this.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Red Hat got some confused customers due to this message. The confused
user case is when they update the BIOS and all of a sudden we have "no
suitable data" yet we did before. We (Arjan van de Ven) thus changed it
to "No new microcode" which is much much clearer.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add some more funky AC97 knowledge to the intel8x0 driver. These come
from Red Hat and its partners and are included in our shipping code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6

Merry Christmas everyone. Ho ho ho!

rth tells me that some versions of gcc may end up using the
SSE registers for data movement when you do that.

Use "-march=i686 -mtune=xxxx" instead.

(We do the same thing for march=pentium2/4 too, just for
consistency).

evdev, joydev, mousedev, tsdev - remove class device and devfs entry when
hardware driver disconnects instead of waiting for the last user to drop off. 
This way hardware drivers can be unloaded at any time.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds missing lock_kernel()/unlock_kernel() pair in
reiserfs_get_dentry
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

mm/rmap.c contains an open-coded reference to swap_token_default_timeout
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CFQ v2 has some spare queue logic that was never enabled.  It has an SMP
deadlock because it attempts to regrab the queue lock in the exit path, so
kill the spare queue stuff completely for 2.6.10.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

switch_uid() doesn't care about tasklist_lock, so do it outside
the lock and avoid a subtle (and very very unlikely to trigger)
AB-BA deadlock.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a build failure with gcc-3.4.1, where we use some functions
before we define them inline. 

The simple way to fix those is to simply un-inline the functions in
question. Since they are somewhat large that's what I did.

An alternative would be to rework the ordering of the file so the
functions are defined before their first use.
Signed-off-by: Jesper juhl <juhl-lkml@dif.dk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into oss.sgi.com:/oss4/bitkeeper/xfs-linux-2.6

agp=off disabled the agpgart driver, but not the chipset specific drivers,
which still did their init routines. Chaos ensued.
Signed-off-by: Dave Jones <davej@redhat.com>

From: Peer.Chen@uli.com.tw
Signed-off-by: Dave Jones <davej@redhat.com>