Fix the following compile failure:

  drivers/media/rc/ite-cir.c: In function 'ite_decode_bytes':
  drivers/media/rc/ite-cir.c:190: error: implicit declaration of function 'generic_find_next_le_bit'
  drivers/media/rc/ite-cir.c:199: error: implicit declaration of function 'generic_find_next_zero_le_bit'

Caused by commit 620a32bb ("[media] rc: New rc-based ite-cir driver
for several ITE CIRs") interacting with commit c4945b9e
("asm-generic: rename generic little-endian bitops functions").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath

Commit ddd588b5 ("oom: suppress nodes that are not allowed from
meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which
resulted in build warnings on all architectures that implement their own
versions of show_mem():

	lib/lib.a(show_mem.o): In function `show_mem':
	show_mem.c:(.text+0x1f4): multiple definition of `show_mem'
	arch/sparc/mm/built-in.o:(.text+0xd70): first defined here

The fix is to remove __show_mem() and add its argument to show_mem() in
all implementations to prevent this breakage.

Architectures that implement their own show_mem() actually don't do
anything with the argument yet, but they could be made to filter nodes
that aren't allowed in the current context in the future just like the
generic implementation.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/vblank: update recently added vbl interface to be more future proof.
  drm radeon: Return -EINVAL on wrong pm sysfs access
  drm/radeon/kms: fix hardcoded EDID handling
  Revert "drm/i915: Don't save/restore hardware status page address register"
  drm/i915: Avoid unmapping pages from a NULL address space
  drm/i915: Fix use after free within tracepoint
  drm/i915: Restore missing command flush before interrupt on BLT ring
  drm/i915: Disable pagefaults along execbuffer relocation fast path
  drm/i915: Fix computation of pitch for dumb bo creator
  drm/i915: report correct render clock frequencies on SNB
  drm/i915/dp: Correct the order of deletion for ghost eDP devices
  drm/i915: Fix tiling corruption from pipelined fencing
  drm/i915: Re-enable self-refresh
  drm/i915: Prevent racy removal of request from client list
  drm/i915: skip redundant operations whilst enabling pipes and planes
  drm/i915: Remove surplus POSTING_READs before wait_for_vblank
  drm/radeon/kms: prefer legacy pll algo for tv-out
  drm: check for modesetting on modeset ioctls
  drm/kernel: vblank wait on crtc > 1
  drm: Fix use-after-free in drm_gem_vm_close()

It turns out that the cmpxchg16b emulation has to access vmalloced
percpu memory with interrupts disabled. If the memory has never
been touched before then the fault necessary to establish the
mapping will not to occur and the kernel will fail on boot.

Fix that by reusing the CONFIG_PREEMPT code that writes the
cpu number into a field on every cpu. Writing to the per cpu
area before causes the mapping to be established before we get
to a cmpxchg16b emulation.
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

On Thu, 24 Mar 2011, Ingo Molnar wrote:
> RIP: 0010:[<ffffffff810570a9>]  [<ffffffff810570a9>] get_next_timer_interrupt+0x119/0x260

That's a typical timer crash, but you were unable to debug it with
debugobjects because commit d3f661d6 broke those.

Cc: Christoph Lameter <cl@linux.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
  MN10300: gcc 4.6 vs am33 inline assembly
  MN10300: Deprecate gdbstub
  MN10300: Allow KGDB to use the MN10300 serial ports
  MN10300: Emulate single stepping in KGDB on MN10300
  MN10300: Generalise kernel debugger kernel halt, reboot or power off hook
  KGDB: Notify GDB of machine halt, reboot or power off
  MN10300: Use KGDB
  MN10300: Create generic kernel debugger hooks
  MN10300: Create general kernel debugger cache flushing
  MN10300: Introduce a general config option for kernel debugger hooks
  MN10300: The icache invalidate functions should disable the icache first
  MN10300: gdbstub: Restrict single-stepping to non-preemptable non-SMP configs

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  pstore: cleanups to pstore_dump()
  [IA64] New syscalls for 2.6.39

* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  mmc: Add MMC_PROGRESS_*
  mmc, ARM: Rename SuperH Mobile ARM zboot helpers
  ARM: mach-shmobile: add coherent DMA mask to CEU camera devices
  ARM: mach-shmobile: Dynamic backlight control for Mackerel

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix build alloc_thread_info_node function
  sh: Fix ptrace hw_breakpoint handling
  sh: Fix ptrace fpu state initialisation
  sh: Re-enable GENERIC_HARDIRQS_NO_DEPRECATED.
  sh: pmb: Use struct syscore_ops instead of sysdevs
  sh: Use struct syscore_ops instead of sysdevs
  sh: Conver to asm-generic/sizes.h.
  sh: wire up sys_syncfs.

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: cdc-acm: fix potential null-pointer dereference on disconnect
  USB: cdc-acm: fix potential null-pointer dereference
  USB: cdc-acm: fix memory corruption / panic
  USB: Fix 'bad dma' problem on WDM device disconnect
  usb: wwan: fix compilation without CONFIG_PM_RUNTIME
  USB: uss720 fixup refcount position
  usb: musb: blackfin: fix typo in new bfin_musb_vbus_status func
  usb: musb: blackfin: fix typo in new dev_pm_ops struct
  usb: musb: blackfin: fix typo in platform driver name
  usb: musb: Fix for merge issue
  ehci-hcd: Bug fix: don't set a QH's Halt bit
  USB: Do not pass negative length to snoop_urb()

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits)
  [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t
  [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly
  [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE
  [media] v4l: soc-camera: Store negotiated buffer settings
  [media] rc: interim support for 32-bit NEC-ish scancodes
  [media] mceusb: topseed 0x0011 needs gen3 init for tx to work
  [media] lirc_zilog: error out if buffer read bytes != chunk size
  [media] lirc: silence some compile warnings
  [media] hdpvr: use same polling interval as other OS
  [media] ir-kbd-i2c: pass device code w/key in hauppauge case
  [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap
  [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map
  [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge
  [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping
  [media] rc-rc5-hauppauge-new: Add support for the old Black RC
  [media] rc-rc5-hauppauge-new: Add the old control to the table
  [media] rc-winfast: Fix the keycode tables
  [media] a800: Fix a few wrong IR key assignments
  [media] opera1: Use multimedia keys instead of an app-specific mapping
  [media] dw2102: Use multimedia keys instead of an app-specific mapping
  ...

Fix up trivial conflicts (remove/modify and some real conflicts) in:
	arch/arm/mach-omap2/devices.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/dabusb/dabusb.c
	drivers/staging/dabusb/dabusb.h
	drivers/staging/easycap/easycap_ioctl.c
	drivers/staging/usbvideo/usbvideo.c
	drivers/staging/usbvideo/vicam.c

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: tegra: harmony: initialize the TPS65862 PMIC
  ARM: tegra: update defconfig
  ARM: tegra: harmony: update PCI-e initialization sequence
  ARM: tegra: trimslice: enable MMC/SD slots
  ARM: tegra: enable new drivers in defconfig
  ARM: tegra: Add Toshiba AC100 support
  ARM: tegra: harmony: Set WM8903 gpio_base
  ARM: tegra: harmony: I2C-related portions of audio support
  ARM: tegra: harmony: register i2c devices
  ARM: tegra: seaboard: register i2c devices
  ARM: tegra: harmony: Beginnings of audio support
  ARM: tegra: create defines for SD-related GPIO names
  ARM: tegra: add devices.c entries for audio

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: Add loopback support for the SPI on 5500
  spi/omap_mcspi: Fix broken last word xfer
  of/flattree: minor cleanups
  dt: eliminate OF_NO_DEEP_PROBE and test for NULL match table
  dt: protect against NULL matches passed to of_match_node()
  dt: Refactor of_platform_bus_probe()

This is my second attempt to make this enum generally available.
The first attempt added MMCIF_PROGRESS_* to include/linux/mmc/sh_mmcif.h.
However this is not sufficiently generic as the enum will be
used by SDHI boot code.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

These headers and helpers will also be used for SDHI boot
so the mmcif name will start to make a lot less sense.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: Rename cpuidle states

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (42 commits)
  ACPI: minor printk format change in acpi_pad
  ACPI: make acpi_pad /sys output more readable
  ACPICA: Update version to 20110316
  ACPICA: Header support for SLIC table
  ACPI: Make sure the FADT is at least rev 2 before using the reset register
  ACPI: Bug compatibility for Windows on the ACPI reboot vector
  ACPICA: Fix access width for reset vector
  ACPI battery: fribble sysfs files from a resume notifier
  ACPI button: remove unused procfs I/F
  ACPI, APEI, Add PCIe AER error information printing support
  PCIe, AER, use pre-generated prefix in error information printing
  ACPI, APEI, Add ERST record ID cache
  ACPI: Use syscore_ops instead of sysdev class and sysdev
  ACPI: Remove the unused EC sysdev class
  ACPI: use __cpuinit for the acpi_processor_set_pdc() call tree
  ACPI: use __init where possible in processor driver
  Thermal_Framework-Fix_crash_during_hwmon_unregister
  ACPICA: Update version to 20110211.
  ACPICA: Add mechanism to defer _REG methods for some installed handlers
  ACPICA: Add support for FunctionalFixedHW in acpi_ut_get_region_name
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: bf54x: re-enable anomaly 05000353 for all revs
  Blackfin: enable atomic64_t support
  Blackfin: wire up new syncfs syscall
  Blackfin: SMP: flush CoreB cache when shutting down

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBIFS: fix assertion warning and refine comments
  UBIFS: kill CONFIG_UBIFS_FS_DEBUG_CHKS
  UBIFS: use GFP_NOFS properly
  UBI: use GFP_NOFS properly

* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Remove resource leak in svc_rdma_send_error()
  nfsd: wrong index used in inner loop
  nfsd4: fix comment and remove unused nfsd4_file fields
  nfs41: make sure nfs server return right ca_maxresponsesize_cached
  nfsd: fix compile error
  svcrpc: fix bad argument in unix_domain_find
  nfsd4: fix struct file leak
  nfsd4: minor nfs4state.c reshuffling
  svcrpc: fix rare race on unix_domain creation
  nfsd41: modify the members value of nfsd4_op_flags
  nfsd: add proc file listing kernel's gss_krb5 enctypes
  gss:krb5 only include enctype numbers in gm_upcall_enctypes
  NFSD, VFS: Remove dead code in nfsd_rename()
  nfsd: kill unused macro definition
  locks: use assign_type()

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: Use vmalloc rather than kmalloc for zlib workspace
  Squashfs: handle corruption of directory structure
  Squashfs: wrap squashfs_mount() definition
  Squashfs: xz_wrapper doesn't need to include squashfs_fs_i.h anymore
  Squashfs: Update documentation to include compression options
  Squashfs: Update Kconfig help text to include xz compression
  Squashfs: add compression options support to xz decompressor
  Squashfs: extend decompressor framework to handle compression options

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Increase DMA max_segment_size on Mellanox hardware
  IB/mad: Improve an error message so error code is included
  RDMA/nes: Don't print success message at level KERN_ERR
  RDMA/addr: Fix return of uninitialized ret value
  IB/srp: try to use larger FMR sizes to cover our mappings
  IB/srp: add support for indirect tables that don't fit in SRP_CMD
  IB/srp: rework mapping engine to use multiple FMR entries
  IB/srp: allow sg_tablesize to be set for each target
  IB/srp: move IB CM setup completion into its own function
  IB/srp: always avoid non-zero offsets into an FMR

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (90 commits)
  mfd: Push byte swaps out of wm8994 bulk read path
  mfd: Rename ab8500 gpadc header
  mfd: Constify WM8994 write path
  mfd: Push byte swap out of WM8994 bulk I/O
  mfd: Avoid copying data in WM8994 I2C write
  mfd: Remove copy from WM831x I2C write function
  mfd: Staticise WM8994 PM ops
  regulator: Add a subdriver for TI TPS6105x regulator portions v2
  mfd: Add a core driver for TI TPS61050/TPS61052 chips v2
  gpio: Add Tunnel Creek support to sch_gpio
  mfd: Add Tunnel Creek support to lpc_sch
  pci_ids: Add Intel Tunnel Creek LPC Bridge device ID.
  regulator: MAX8997/8966 support
  mfd: Add WM8994 bulk register write operation
  mfd: Append additional read write on 88pm860x
  mfd: Adopt mfd_data in 88pm860x input driver
  mfd: Adopt mfd_data in 88pm860x regulator
  mfd: Adopt mfd_data in 88pm860x led
  mfd: Adopt mfd_data in 88pm860x backlight
  mfd: Fix MAX8997 Kconfig entry typos
  ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: deprecate the commands pending counter
  exofs: Write sbi->s_nextid as part of the Create command
  exofs: Add option to mount by osdname
  exofs: Override read-ahead to align on stripe_size
  exofs: simple fsync race fix
  exofs: Optimize read_4_write
  exofs: Trivial: fix some indentation and debug prints
  exofs: Remove redundant unlikely()

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (140 commits)
  MAINTAINERS: de-orphan fbdev.
  MAINTAINERS: Add file pattern for fb dt bindings.
  video: Move sm501fb devicetree binding documentation to a better place.
  fbcon: fix situation where fbcon gets deinitialised and can't reinit.
  video, sm501: add OF binding to support SM501
  video, sm501: add edid and commandline support
  video, sm501: add I/O functions for use on powerpc
  video: Fix EDID macros H_SYNC_WIDTH and H_SYNC_OFFSET
  fbcon: Bugfix soft cursor detection in Tile Blitting
  video: add missing framebuffer_release in error path
  video: metronomefb: add __devexit_p around reference to metronomefb_remove
  video: hecubafb: add __devexit_p around reference to hecubafb_remove
  drivers:video:aty:radeon_base Fix typo occationally to occasionally
  atmel_lcdfb: add fb_blank function
  atmel_lcdfb: implement inverted contrast pwm
  video: s3c-fb: return proper error if clk_get fails
  uvesafb,vesafb: create WC or WB PAT-entries
  video: ffb: fix ffb_probe error path
  radeonfb: Let hwmon driver probe the "monid" I2C bus
  fbdev: sh_mobile_lcdc: checking NULL instead of IS_ERR()
  ...

This patch fixes the following UBIFS assertion warning:

UBIFS assert failed in do_readpage at 115 (pid 199)
[<b00321b8>] (unwind_backtrace+0x0/0xdc) from [<af025118>]
(do_readpage+0x108/0x594 [ubifs])
[<af025118>] (do_readpage+0x108/0x594 [ubifs]) from [<af025764>]
(ubifs_write_end+0x1c0/0x2e8 [ubifs])
[<af025764>] (ubifs_write_end+0x1c0/0x2e8 [ubifs]) from
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270)
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270) from
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0)
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0) from
[<b00a0984>] (generic_file_aio_write+0x68/0xc8)
[<b00a0984>] (generic_file_aio_write+0x68/0xc8) from
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs])
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs]) from
[<b00d104c>] (do_sync_write+0xb0/0x100)
[<b00d104c>] (do_sync_write+0xb0/0x100) from [<b00d1abc>]
(vfs_write+0xac/0x154)
[<b00d1abc>] (vfs_write+0xac/0x154) from [<b00d1c10>]
(sys_write+0x3c/0x68)
[<b00d1c10>] (sys_write+0x3c/0x68) from [<b002d9a0>]
(ret_fast_syscall+0x0/0x2c)

The 'PG_checked' flag is used to indicate that the page does not
supposedly exist on the media (e.g., a hole or a page beyond the
inode size), so it requires slightly bigger budget, because we have
to account the indexing size increase. And this flag basically
tells that the budget for this page has to be "new page budget".
The "new page budget" is slightly bigger than the "existing page
budget".

The 'do_readpage()' function has the following assertion which
sometimes is hit: 'ubifs_assert(!PageChecked(page))'. Obviously,
the meaning of this assertion is: "I should not be asked to read
a page which does not exist on the media".

However, in 'ubifs_write_begin()' we have a small "trick". Notice,
that VFS may write pages which were not read yet, so the page data
were not loaded from the media to the page cache yet. If VFS tells
that it is going to change only some part of the page, we obviously
have to load it from the media. However, if VFS tells that it is
going to change whole page, we do not read it from the media for
optimization purposes.

However, since we do not read it, we do not know if it exists on
the media or not (a hole, etc). So we set the 'PG_checked' flag
to this page to force bigger budget, just in case.

So 'ubifs_write_begin()' sets 'PG_checked'. Then we are in
'ubifs_write_end()'. And VFS tells us: "hey, for some reasons I
changed my mind and did not change whole page". Frankly, I do not
know why this happens, but I hit this somehow on an ARM platform.
And this is extremely rare.

So in this case UBIFS does the following:

1. Cancels allocated budget.
2. Loads the page from the media by calling 'do_readpage()'.
3. Asks VFS to repeat the whole write operation from the very
   beginning (call '->write_begin() again, etc).

And the assertion warning is hit at the step 2 - remember we have
the 'PG_checked' set for this page, and 'do_readpage()' does not
like this. So this patch fixes the problem by adding step 1.5 and
cleaning the 'PG_checked' before calling 'do_readpage()'.

All in all, this patch does not fix any functionality issue, but it
silences UBIFS false positive warning which may happen in very very
rare cases.

And while on it, this patch also improves a commentary which explains
the reasons of setting the 'PG_checked' flag for the page. The old
commentary was a bit difficult to understand.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

Simplify UBIFS configuration menu and kill the option to enable self-check
compile-time. We do not really need this because we can do this run-time
using the module parameters or the corresponding sysfs interfaces. And
there is a value in simplifying the kernel configuration menu which becomes
increasingly large.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch fixes a brown-paperbag bug which was introduced by me:
I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make
sure my allocations do not cause write-back. But the correct form
is "GFP_NOFS".
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch fixes a brown-paperbag bug which was introduced by me:
I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make
sure my allocations do not cause write-back. But the correct form
is "GFP_NOFS".
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

This makes the interface a bit cleaner by leaving a single gap in the
vblank bit space instead of creating two gaps.

Suggestions from Michel on mailing list/irc.
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Throw an error if someone tries to fill this with
wrong data, instead of simply ignoring the input.
Now you get:

echo hello >/sys/../power_method
-bash: echo: write error: Invalid argument
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Alexander.Deucher@amd.com
CC: dri-devel@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

On some servers there is a hardcoded EDID provided
in the vbios so that the driver will always see a
display connected even if something like a KVM
prevents traditional means like DDC or load
detection from working properly.  Also most
server boards with DVI are not actually DVI, but
DVO connected to a virtual KVM service processor.
If we fail to detect a monitor via DDC or load
detection and a hardcoded EDID is available, use
it.

Additionally, when using the hardcoded EDID, use
a copy of it rather than the actual one stored
in the driver as the detect() and get_modes()
functions may free it if DDC is successful.

This fixes the virtual KVM on several internal
servers.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'intel/drm-intel-fixes' of ../drm-next:
  Revert "drm/i915: Don't save/restore hardware status page address register"
  drm/i915: Avoid unmapping pages from a NULL address space
  drm/i915: Fix use after free within tracepoint
  drm/i915: Restore missing command flush before interrupt on BLT ring
  drm/i915: Disable pagefaults along execbuffer relocation fast path
  drm/i915: Fix computation of pitch for dumb bo creator
  drm/i915: report correct render clock frequencies on SNB
  drm/i915/dp: Correct the order of deletion for ghost eDP devices
  drm/i915: Fix tiling corruption from pipelined fencing
  drm/i915: Re-enable self-refresh
  drm/i915: Prevent racy removal of request from client list
  drm/i915: skip redundant operations whilst enabling pipes and planes
  drm/i915: Remove surplus POSTING_READs before wait_for_vblank

This reverts commit a7a75c8f.

There are two different variations on how Intel hardware addresses the
"Hardware Status Page". One as a location in physical memory and the
other as an offset into the virtual memory of the GPU, used in more
recent chipsets. (The HWS itself is a cacheable region of memory which
the GPU can write to without requiring CPU synchronisation, used for
updating various details of hardware state, such as the position of
the GPU head in the ringbuffer, the last breadcrumb seqno, etc).

These two types of addresses were updated in different locations of code
- one inline with the ringbuffer initialisation, and the other during
device initialisation. (The HWS page is logically associated with
the rings, and there is one HWS page per ring.) During resume, only the
ringbuffers were being re-initialised along with the virtual HWS page,
leaving the older physical address HWS untouched. This then caused a
hang on the older gen3/4 (915GM, 945GM, 965GM) the first time we tried
to synchronise the GPU as the breadcrumbs were never being updated.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Jan Niehusmann <jan@gondor.com>
Reported-and-tested-by: Justin P. Mattock <justinmattock@gmail.com>
Reported-and-tested-by: Michael "brot" Groh <brot@minad.de>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>

By commit b6a84016,
alloc_thread_info was replaced by alloc_thread_info_node.
However, the change of the function name and the addition of the argument
were incomplete.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  deal with races in /proc/*/{syscall,stack,personality}
  proc: enable writing to /proc/pid/mem
  proc: make check_mem_permission() return an mm_struct on success
  proc: hold cred_guard_mutex in check_mem_permission()
  proc: disable mem_write after exec
  mm: implement access_remote_vm
  mm: factor out main logic of access_process_vm
  mm: use mm_struct to resolve gate vma's in __get_user_pages
  mm: arch: rename in_gate_area_no_task to in_gate_area_no_mm
  mm: arch: make in_gate_area take an mm_struct instead of a task_struct
  mm: arch: make get_gate_vma take an mm_struct instead of a task_struct
  x86: mark associated mm when running a task in 32 bit compatibility mode
  x86: add context tag to mark mm when running a task in 32-bit compatibility mode
  auxv: require the target to be tracable (or yourself)
  close race in /proc/*/environ
  report errors in /proc/*/*map* sanely
  pagemap: close races with suid execve
  make sessionid permissions in /proc/*/task/* match those in /proc/*
  fix leaks in path_lookupat()

Fix up trivial conflicts in fs/proc/base.c

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits)
  ARM: Update (and cut down) mach-types
  ARM: 6771/1: vexpress: add support for multiple core tiles
  ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings
  ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig
  ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
  ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime
  ARM: pgtable: add pud-level code
  ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks
  ARM: Use long long format when printing meminfo physical addresses
  ARM: integrator: add Integrator/CP sched_clock support
  ARM: realview/vexpress: consolidate SMP bringup code
  ARM: realview/vexpress: consolidate localtimer support
  ARM: integrator/versatile: consolidate FPGA IRQ handling code
  ARM: rationalize versatile family Kconfig/Makefile
  ARM: realview: remove old AMBA device DMA definitions
  ARM: versatile: remove old AMBA device DMA definitions
  ARM: vexpress: use new init_early for clock tree and sched_clock init
  ARM: realview: use new init_early for clock tree and sched_clock init
  ARM: versatile: use new init_early for clock tree and sched_clock init
  ARM: integrator: use new init_early for clock tree init
  ...