- 23 May, 2020 2 commits
-
-
Leon Yu authored
Commit 14b41a29 ("net: stmmac: Delete txtimer in suspend") was the first attempt to fix a race between mod_timer() and setup_timer() during stmmac_resume(). However the issue still exists as the commit only addressed half of the issue. Same race can still happen as stmmac_resume() re-attaches interface way too early - even before hardware is fully initialized. Worse, doing so allows network traffic to restart and stmmac_tx_timer_arm() being called in the middle of stmmac_resume(), which re-init tx timers in stmmac_init_coalesce(). timer_list will be corrupted and system crashes as a result of race between mod_timer() and setup_timer(). systemd--1995 2.... 552950018us : stmmac_suspend: 4994 ksoftirq-9 0..s2 553123133us : stmmac_tx_timer_arm: 2276 systemd--1995 0.... 553127896us : stmmac_resume: 5101 systemd--320 7...2 553132752us : stmmac_tx_timer_arm: 2276 (sd-exec-1999 5...2 553135204us : stmmac_tx_timer_arm: 2276 --------------------------------- pc : run_timer_softirq+0x468/0x5e0 lr : run_timer_softirq+0x570/0x5e0 Call trace: run_timer_softirq+0x468/0x5e0 __do_softirq+0x124/0x398 irq_exit+0xd8/0xe0 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0x60/0xb0 el1_irq+0xb8/0x180 arch_cpu_idle+0x38/0x230 default_idle_call+0x24/0x3c do_idle+0x1e0/0x2b8 cpu_startup_entry+0x28/0x48 secondary_start_kernel+0x1b4/0x208 Fix this by deferring netif_device_attach() to the end of stmmac_resume(). Signed-off-by:
Leon Yu <leoyu@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tiezhu Yang authored
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
-
- 22 May, 2020 32 commits
-
-
David S. Miller authored
Merge tag 'rxrpc-fixes-20200523-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fix a warning and a leak [ver #2] Here are a couple of fixes for AF_RXRPC: (1) Fix an uninitialised variable warning. (2) Fix a leak of the ticket on error in rxkad. ==================== Signed-off-by:
-
Qiushi Wu authored
A ticket was not released after a call of the function "rxkad_decrypt_ticket" failed. Thus replace the jump target "temporary_error_free_resp" by "temporary_error_free_ticket". Fixes: 8c2f826d ("rxrpc: Don't put crypto buffers on the stack") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Markus Elfring <Markus.Elfring@web.de>
-
David Howells authored
Fix a warning due to an uninitialised variable. le included from ../fs/afs/fs_probe.c:11: ../fs/afs/fs_probe.c: In function 'afs_fileserver_probe_result': ../fs/afs/internal.h:1453:2: warning: 'rtt_us' may be used uninitialized in this function [-Wmaybe-uninitialized] 1453 | printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__) | ^~~~~~ ../fs/afs/fs_probe.c:35:15: note: 'rtt_us' was declared here Signed-off-by: -
Qiushi Wu authored
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res". Fixes: 1f26dac3 ("[NET]: Add Sun Cassini driver.") Signed-off-by:
-
Vladimir Oltean authored
ocelot_set_ageing_time has 2 callers: - felix_set_ageing_time: from drivers/net/dsa/ocelot/felix.c - ocelot_port_attr_ageing_set: from drivers/net/ethernet/mscc/ocelot.c The issue described in the fixed commit below actually happened for the felix_set_ageing_time code path only, since ocelot_port_attr_ageing_set was already dividing by 1000. So to make both paths symmetrical (and to fix addresses getting aged way too fast on Ocelot), stop dividing by 1000 at caller side altogether. Fixes: c0d7eccb ("net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Heiner Kallweit authored
According to r8168 vendor driver DASHv3 chips like RTL8168fp/RTL8117 need a special addressing for OCP access. Fix is compile-tested only due to missing test hardware. Fixes: 1287723a ("r8169: add support for RTL8117") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 from Jiri fixes a use-after-free discovered while fuzzing mlxsw / devlink with syzkaller. Patch #2 from Amit works around a limitation in new versions of arping, which is used in several selftests. ==================== Signed-off-by: -
Amit Cohen authored
Starting from iputils s20190709 (used in Fedora 31), arping does not support timeout being specified as a decimal: $ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1 arping: invalid argument: '0.1' Previously, such timeouts were rounded to an integer. Fix this by specifying the timeout as an integer. Fixes: a5ee171d ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths. Fixes: 24cc68ad ("mlxsw: core: Add support for reload") Reported-by:
Danielle Ratson <danieller@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jonathan McDowell authored
The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== netdevsim: Two small fixes Fix two bugs observed while analyzing regression failures. Patch #1 fixes a bug where sometimes the drop counter of a packet trap policer would not increase. Patch #2 adds a missing initialization of a variable in a related selftest. ==================== Signed-off-by: -
Ido Schimmel authored
The variable is used by log_test() to check if the test case completely successfully or not. In case it is not initialized at the start of a test case, it is possible for the test case to fail despite not encountering any errors. Example: ``` ... TEST: Trap group statistics [ OK ] TEST: Trap policer [FAIL] Policer drop counter was not incremented TEST: Trap policer binding [FAIL] Policer drop counter was not incremented ``` Failure of trap_policer_test() caused trap_policer_bind_test() to fail as well. Fix by adding missing initialization of the variable. Fixes: 5fbff58e ("selftests: netdevsim: Add test cases for devlink-trap policers") Signed-off-by:
-
Ido Schimmel authored
In case the policer drop counter is retrieved when the jiffies value is a multiple of 64, the counter will not be incremented. This randomly breaks a selftest [1] the reads the counter twice and checks that it was incremented: ``` TEST: Trap policer [FAIL] Policer drop counter was not incremented ``` Fix by always incrementing the counter by 1. [1] tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh Fixes: ad188458 ("netdevsim: Add devlink-trap policer support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix retransmission timeout and ACK discard Here are a couple of fixes and an extra tracepoint for AF_RXRPC: (1) Calculate the RTO pretty much as TCP does, rather than making something up, including an initial 4s timeout (which causes return probes from the fileserver to fail if a packet goes missing), and add backoff. (2) Fix the discarding of out-of-order received ACKs. We mustn't let the hard-ACK point regress, nor do we want to do unnecessary retransmission because the soft-ACK list regresses. This is not trivial, however, due to some loose wording in various old protocol specs, the ACK field that should be used for this sometimes has the wrong information in it. (3) Add a tracepoint to log a discarded ACK. ==================== Signed-off-by: -
Valentin Longchamp authored
ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Acked-by:
Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by:
-
Jere Leppänen authored
Commit bdf6fa52 ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space. The problem scenario: 1. Client crashes and/or restarts. 2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost. 3. Client reconnects using the same addresses and ports. 4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor. Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state: IPv4: Attempt to release TCP socket in state 1 00000000377288c7 Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
dst_cache_get() documents it must be used with BH disabled. sysbot reported : BUG: using smp_processor_id() in preemptible [00000000] code: /21697 caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 CPU: 0 PID: 21697 Comm: Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 check_preemption_disabled lib/smp_processor_id.c:47 [inline] debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57 dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164 tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244 tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526 tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331 __tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995 tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Fixes: e9c1a793 ("tipc: add dst_cache support for udp media") Cc: Xin Long <lucien.xin@gmail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Russell King authored
When rxhash is enabled on any ethernet port except the first in each CP block, traffic flow is prevented. The analysis is below: I've been investigating this afternoon, and what I've found, comparing a kernel without 895586d5 and with 895586d5 applied is: - The table programmed into the hardware via mvpp22_rss_fill_table() appears to be identical with or without the commit. - When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports that c2.attr[0] and c2.attr[2] are written back containing: - with 895586d5, failing: 00200000 40000000 - without 895586d5, working: 04000000 40000000 - When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as: 04000000 00000000 The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the first value is the queue number, which comprises two fields. The high 5 bits are 24:29 and the low three are 21:23 inclusive. This comes from: c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) | MVPP22_CLS_C2_ATTR0_QLOW(ql); So, the working case gives eth2 a queue id of 4.0, or 32 as per port->first_rxq, and the non-working case a queue id of 0.1, or 1. The allocation of queue IDs seems to be in mvpp2_port_probe(): if (priv->hw_version == MVPP21) port->first_rxq = port->id * port->nrxqs; else port->first_rxq = port->id * priv->max_port_rxqs; Where: if (priv->hw_version == MVPP21) priv->max_port_rxqs = 8; else priv->max_port_rxqs = 32; Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1 (eth2) be 32. It seems the idea is that the first 32 queues belong to port 0, the second 32 queues belong to port 1, etc. mvpp2_rss_port_c2_enable() gets the queue number from it's parameter, 'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns port->rss_ctx[0]. mvpp22_rss_context_create() is responsible for allocating that, which it does by looking for an unallocated priv->rss_tables[] pointer. This table is shared amongst all ports on the CP silicon. When we write the tables in mvpp22_rss_fill_table(), the RSS table entry is defined by: u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) | MVPP22_RSS_INDEX_TABLE_ENTRY(i); where rss_ctx is the context ID (queue number) and i is the index in the table. If we look at what is written: - The first table to be written has "sel" values of 00000000..0000001f, containing values 0..3. This appears to be for eth1. This is table 0, RX queue number 0. - The second table has "sel" values of 00000100..0000011f, and appears to be for eth2. These contain values 0x20..0x23. This is table 1, RX queue number 0. - The third table has "sel" values of 00000200..0000021f, and appears to be for eth3. These contain values 0x40..0x43. This is table 2, RX queue number 0. How do queue numbers translate to the RSS table? There is another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE register. Before 895586d5, it was: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(port->first_rxq)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(port->id)); and after: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx)); Before the commit, for eth2, that would've contained '32' for the index and '1' for the table pointer - mapping queue 32 to table 1. Remember that this is queue-high.queue-low of 4.0. After the commit, we appear to map queue 1 to table 1. That again looks fine on the face of it. Section 9.3.1 of the A8040 manual seems indicate the reason that the queue number is separated. queue-low seems to always come from the classifier, whereas queue-high can be from the ingress physical port number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG. We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to be where our bug comes from. mvpp2_cls_oversize_rxq_set() sets this up as: mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id), (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS)); val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG); val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val); Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high for eth2 is _always_ 4, so only queues 32 through 39 inclusive are available to eth2. Yet, we're trying to tell the classifier to set queue-high, which will be ignored, to zero. Hence, the queue-high field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be ignored. This means we end up directing traffic from eth2 not to queue 1, but to queue 33, and then we tell it to look up queue 33 in the RSS table. However, RSS table has not been programmed for queue 33, and so it ends up (presumably) dropping the packets. It seems that mvpp22_rss_context_create() doesn't take account of the fact that the upper 5 bits of the queue ID can't actually be changed due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either way, these two functions mutually disagree with what queue number should be used. Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used for over-sized packets attempting to egress through this port. With the classifier having had RSS enabled and directing eth2 traffic to queue 1, we may still have packets appearing on queue 32 for this port. However, the only way we may end up with over-sized packets attempting to egress through eth2 - is if the A8040 forwards frames between its ports. From what I can see, we don't support that feature, and the kernel restricts the egress packet size to the MTU. In any case, if we were to attempt to transmit an oversized packet, we have no support in the kernel to deal with that appearing in the port's receive queue. So, this patch attempts to solve the issue by clearing the MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH() from the classifier to define the queue-high field of the queue number. My testing seems to confirm my findings above - clearing this bit means that if I enable rxhash on eth2, the interface can then pass traffic, as we are now directing traffic to RX queue 1 rather than queue 33. Traffic still seems to work with rxhash off as well. Reported-by:
Matteo Croce <mcroce@redhat.com> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-05-22 The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 3 day(s) which contain a total of 5 files changed, 69 insertions(+), 11 deletions(-). The main changes are: 1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier relies on such map content to be frozen, from Andrii Nakryiko. 2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use call_int_hook() since this hook is not stackable, from KP Singh. 3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki. ==================== Signed-off-by: -
Claudiu Manoil authored
The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
-
Todd Malsbary authored
There is some ambiguity in the RFC as to whether the ADD_ADDR HMAC is the rightmost 64 bits of the entire hash or of the leftmost 160 bits of the hash. The intention, as clarified with the author of the RFC, is the entire hash. This change returns the entire hash from mptcp_crypto_hmac_sha (instead of only the first 160 bits), and moves any truncation/selection operation on the hash to the caller. Fixes: 12555a2d ("mptcp: use rightmost 64 bits in ADD_ADDR HMAC") Reviewed-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Todd Malsbary <todd.malsbary@linux.intel.com> Signed-off-by:
-
Jakub Sitnicki authored
When attaching a flow dissector program to a network namespace with bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog. If netns gets destroyed while a flow dissector is still attached, and there are no other references to the prog, we leak the reference and the program remains loaded. Leak can be reproduced by running flow dissector tests from selftests/bpf: # bpftool prog list # ./test_flow_dissector.sh ... selftests: test_flow_dissector [PASS] # bpftool prog list 4: flow_dissector name _dissect tag e314084d332a5338 gpl loaded_at 2020-05-20T18:50:53+0200 uid 0 xlated 552B jited 355B memlock 4096B map_ids 3,4 btf_id 4 # Fix it by detaching the flow dissector program when netns is going away. Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook") Signed-off-by:Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20200521083435.560256-1-jakub@cloudflare.com
-
Tang Bin authored
In the function devm_platform_ioremap_resource(), if get resource failed, the return value is ERR_PTR() not NULL. Thus it must be replaced by IS_ERR(), or else it may result in crashes if a critical error path is encountered. Fixes: 0ce5ebd2 ("mfd: ioc3: Add driver for SGI IOC3 chip") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
-
Sabrina Dubroca authored
In case we can't find a ->dumpit callback for the requested (family,type) pair, we fall back to (PF_UNSPEC,type). In effect, we're in the same situation as if userspace had requested a PF_UNSPEC dump. For RTM_GETROUTE, that handler is rtnl_dump_all, which calls all the registered RTM_GETROUTE handlers. The requested table id may or may not exist for all of those families. commit ae677bbb ("net: Don't return invalid table id error when dumping all families") fixed the problem when userspace explicitly requests a PF_UNSPEC dump, but missed the fallback case. For example, when we pass ipv6.disable=1 to a kernel with CONFIG_IP_MROUTE=y and CONFIG_IP_MROUTE_MULTIPLE_TABLES=y, the (PF_INET6, RTM_GETROUTE) handler isn't registered, so we end up in rtnl_dump_all, and listing IPv6 routes will unexpectedly print: # ip -6 r Error: ipv4: MR table does not exist. Dump terminated commit ae677bbb introduced the dump_all_families variable, which gets set when userspace requests a PF_UNSPEC dump. However, we can't simply set the family to PF_UNSPEC in rtnetlink_rcv_msg in the fallback case to get dump_all_families == true, because some messages types (for example RTM_GETRULE and RTM_GETNEIGH) only register the PF_UNSPEC handler and use the family to filter in the kernel what is dumped to userspace. We would then export more entries, that userspace would have to filter. iproute does that, but other programs may not. Instead, this patch removes dump_all_families and updates the RTM_GETROUTE handlers to check if the family that is being dumped is their own. When it's not, which covers both the intentional PF_UNSPEC dumps (as dump_all_families did) and the fallback case, ignore the missing table id error. Fixes: cb167893 ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Vadim Fedorenko authored
In case of error with MPLS support the code is misusing AF_INET instead of AF_MPLS. Fixes: 1b69e7e6 ("ipip: support MPLS over IPv4") Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by:
-
David S. Miller authored
Vadim Fedorenko says: ==================== net/tls: fix encryption error path The problem with data stream corruption was found in KTLS transmit path with small socket send buffers and large amount of data. bpf_exec_tx_verdict() frees open record on any type of error including EAGAIN, ENOMEM and ENOSPC while callers are able to recover this transient errors. Also wrong error code was returned to user space in that case. This patchset fixes the problems. ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vadim Fedorenko authored
We cannot free record on any transient error because it leads to losing previos data. Check socket error to know whether record must be freed or not. Fixes: d10523d0 ("net/tls: free the record on encryption error") Signed-off-by:
-
Vadim Fedorenko authored
bpf_exec_tx_verdict() can return negative value for copied variable. In that case this value will be pushed back to caller and the real error code will be lost. Fix it using signed type and checking for positive value. Fixes: d10523d0 ("net/tls: free the record on encryption error") Fixes: d3b18ad3 ("tls: add bpf support to sk_msg handling") Signed-off-by:
-
David S. Miller authored
Wei Yongjun says: ==================== net: ethernet: ti: fix some return value check This patchset convert cpsw_ale_create() to return PTR_ERR() only, and changed all the caller to check IS_ERR() instead of NULL. Since v2: 1) rebased on net.git, as Jakub's suggest 2) split am65-cpsw-nuss.c changes, as Grygorii's suggest ==================== Signed-off-by: -
Wei Yongjun authored
Convert to using IS_ERR() instead of NULL test for cpsw_ale_create() error handling. Also fix to return negative error code from this error handling case instead of 0 in. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
cpsw_ale_create() can return both NULL and PTR_ERR(), but all of the caller only check NULL for error handling. This patch convert it to only return PTR_ERR() in all error cases, and the caller using IS_ERR() instead of NULL test. Fixes: 4b41d343 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Reported-by:
-
Manivannan Sadhasivam authored
Once the traversal of the list is completed with list_for_each_entry(), the iterator (node) will point to an invalid object. So passing this to qrtr_local_enqueue() which is outside of the iterator block is erroneous eventhough the object is not used. So fix this by passing NULL to qrtr_local_enqueue(). Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
- 21 May, 2020 6 commits
-
-
Michal Kubecek authored
As ethnl_request_ops::reply_size handlers do not include common header size into calculated/estimated reply size, it needs to be added in ethnl_default_doit() and ethnl_default_notify() before allocating the message. On the other hand, strset_reply_size() should not add common header size. Fixes: 728480f1 ("ethtool: default handlers for GET requests") Reported-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Stephen Worley authored
Fixes data remnant seen when we fail to reserve space for a nexthop group during a larger dump. If we fail the reservation, we goto nla_put_failure and cancel the message. Reproduce with the following iproute2 commands: ===================== ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add dummy3 type dummy ip link add dummy4 type dummy ip link add dummy5 type dummy ip link add dummy6 type dummy ip link add dummy7 type dummy ip link add dummy8 type dummy ip link add dummy9 type dummy ip link add dummy10 type dummy ip link add dummy11 type dummy ip link add dummy12 type dummy ip link add dummy13 type dummy ip link add dummy14 type dummy ip link add dummy15 type dummy ip link add dummy16 type dummy ip link add dummy17 type dummy ip link add dummy18 type dummy ip link add dummy19 type dummy ip link add dummy20 type dummy ip link add dummy21 type dummy ip link add dummy22 type dummy ip link add dummy23 type dummy ip link add dummy24 type dummy ip link add dummy25 type dummy ip link add dummy26 type dummy ip link add dummy27 type dummy ip link add dummy28 type dummy ip link add dummy29 type dummy ip link add dummy30 type dummy ip link add dummy31 type dummy ip link add dummy32 type dummy ip link set dummy1 up ip link set dummy2 up ip link set dummy3 up ip link set dummy4 up ip link set dummy5 up ip link set dummy6 up ip link set dummy7 up ip link set dummy8 up ip link set dummy9 up ip link set dummy10 up ip link set dummy11 up ip link set dummy12 up ip link set dummy13 up ip link set dummy14 up ip link set dummy15 up ip link set dummy16 up ip link set dummy17 up ip link set dummy18 up ip link set dummy19 up ip link set dummy20 up ip link set dummy21 up ip link set dummy22 up ip link set dummy23 up ip link set dummy24 up ip link set dummy25 up ip link set dummy26 up ip link set dummy27 up ip link set dummy28 up ip link set dummy29 up ip link set dummy30 up ip link set dummy31 up ip link set dummy32 up ip link set dummy33 up ip link set dummy34 up ip link set vrf-red up ip link set vrf-blue up ip link set dummyVRFred up ip link set dummyVRFblue up ip ro add 1.1.1.1/32 dev dummy1 ip ro add 1.1.1.2/32 dev dummy2 ip ro add 1.1.1.3/32 dev dummy3 ip ro add 1.1.1.4/32 dev dummy4 ip ro add 1.1.1.5/32 dev dummy5 ip ro add 1.1.1.6/32 dev dummy6 ip ro add 1.1.1.7/32 dev dummy7 ip ro add 1.1.1.8/32 dev dummy8 ip ro add 1.1.1.9/32 dev dummy9 ip ro add 1.1.1.10/32 dev dummy10 ip ro add 1.1.1.11/32 dev dummy11 ip ro add 1.1.1.12/32 dev dummy12 ip ro add 1.1.1.13/32 dev dummy13 ip ro add 1.1.1.14/32 dev dummy14 ip ro add 1.1.1.15/32 dev dummy15 ip ro add 1.1.1.16/32 dev dummy16 ip ro add 1.1.1.17/32 dev dummy17 ip ro add 1.1.1.18/32 dev dummy18 ip ro add 1.1.1.19/32 dev dummy19 ip ro add 1.1.1.20/32 dev dummy20 ip ro add 1.1.1.21/32 dev dummy21 ip ro add 1.1.1.22/32 dev dummy22 ip ro add 1.1.1.23/32 dev dummy23 ip ro add 1.1.1.24/32 dev dummy24 ip ro add 1.1.1.25/32 dev dummy25 ip ro add 1.1.1.26/32 dev dummy26 ip ro add 1.1.1.27/32 dev dummy27 ip ro add 1.1.1.28/32 dev dummy28 ip ro add 1.1.1.29/32 dev dummy29 ip ro add 1.1.1.30/32 dev dummy30 ip ro add 1.1.1.31/32 dev dummy31 ip ro add 1.1.1.32/32 dev dummy32 ip next add id 1 via 1.1.1.1 dev dummy1 ip next add id 2 via 1.1.1.2 dev dummy2 ip next add id 3 via 1.1.1.3 dev dummy3 ip next add id 4 via 1.1.1.4 dev dummy4 ip next add id 5 via 1.1.1.5 dev dummy5 ip next add id 6 via 1.1.1.6 dev dummy6 ip next add id 7 via 1.1.1.7 dev dummy7 ip next add id 8 via 1.1.1.8 dev dummy8 ip next add id 9 via 1.1.1.9 dev dummy9 ip next add id 10 via 1.1.1.10 dev dummy10 ip next add id 11 via 1.1.1.11 dev dummy11 ip next add id 12 via 1.1.1.12 dev dummy12 ip next add id 13 via 1.1.1.13 dev dummy13 ip next add id 14 via 1.1.1.14 dev dummy14 ip next add id 15 via 1.1.1.15 dev dummy15 ip next add id 16 via 1.1.1.16 dev dummy16 ip next add id 17 via 1.1.1.17 dev dummy17 ip next add id 18 via 1.1.1.18 dev dummy18 ip next add id 19 via 1.1.1.19 dev dummy19 ip next add id 20 via 1.1.1.20 dev dummy20 ip next add id 21 via 1.1.1.21 dev dummy21 ip next add id 22 via 1.1.1.22 dev dummy22 ip next add id 23 via 1.1.1.23 dev dummy23 ip next add id 24 via 1.1.1.24 dev dummy24 ip next add id 25 via 1.1.1.25 dev dummy25 ip next add id 26 via 1.1.1.26 dev dummy26 ip next add id 27 via 1.1.1.27 dev dummy27 ip next add id 28 via 1.1.1.28 dev dummy28 ip next add id 29 via 1.1.1.29 dev dummy29 ip next add id 30 via 1.1.1.30 dev dummy30 ip next add id 31 via 1.1.1.31 dev dummy31 ip next add id 32 via 1.1.1.32 dev dummy32 i=100 while [ $i -le 200 ] do ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19 echo $i ((i++)) done ip next add id 999 group 1/2/3/4/5/6 ip next ls ======================== Fixes: ab84be7e ("net: Initial nexthop code") Signed-off-by:
Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by:
-
Eric Dumazet authored
syzbot was able to trigger this trace [1], probably by using a zero optlen. While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ. [1] BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569 CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strnlen+0xf9/0x170 lib/string.c:569 dev_name_hash net/core/dev.c:207 [inline] netdev_name_node_lookup net/core/dev.c:277 [inline] __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:413 [inline] __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f57dd9 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101 RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Local variable ----devname@ax25_setsockopt created at: ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc7 Hopefully these are the last fixes for 5.7: 1) A trivial bump in the selftest harness to support gcc-10. build.wireguard.com is still on gcc-9 but I'll probably switch to gcc-10 in the coming weeks. 2) A concurrency fix regarding userspace modifying the pre-shared key at the same time as packets are being processed, reported by Matt Dunwoodie. 3) We were previously clearing skb->hash on egress, which broke fq_codel, cake, and other things that actually make use of the flow hash for queueing, reported by Dave Taht and Toke Høiland-Jørgensen. 4) A fix for the increased memory usage caused by (3). This can be thought of as part of patch (3), but because of the separate reasoning and breadth of it I thought made it a bit cleaner to put in a standalone commit. Fixes (2), (3), and (4) are -stable material. ==================== Signed-off-by: -
Jason A. Donenfeld authored
In "wireguard: queueing: preserve flow hash across packet scrubbing", we were required to slightly increase the size of the receive replay counter to something still fairly small, but an increase nonetheless. It turns out that we can recoup some of the additional memory overhead by splitting up the prior union type into two distinct types. Before, we used the same "noise_counter" union for both sending and receiving, with sending just using a simple atomic64_t, while receiving used the full replay counter checker. This meant that most of the memory being allocated for the sending counter was being wasted. Since the old "noise_counter" type increased in size in the prior commit, now is a good time to split up that union type into a distinct "noise_replay_ counter" for receiving and a boring atomic64_t for sending, each using neither more nor less memory than required. Also, since sometimes the replay counter is accessed without necessitating additional accesses to the bitmap, we can reduce cache misses by hoisting the always-necessary lock above the bitmap in the struct layout. We also change a "noise_replay_counter" stack allocation to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack frame warning. All and all, removing a bit of abstraction in this commit makes the code simpler and smaller, in addition to the motivating memory usage recuperation. For example, passing around raw "noise_symmetric_key" structs is something that really only makes sense within noise.c, in the one place where the sending and receiving keys can safely be thought of as the same type of object; subsequent to that, it's important that we uniformly access these through keypair->{sending,receiving}, where their distinct roles are always made explicit. So this patch allows us to draw that distinction clearly as well. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
It's important that we clear most header fields during encapsulation and decapsulation, because the packet is substantially changed, and we don't want any info leak or logic bug due to an accidental correlation. But, for encapsulation, it's wrong to clear skb->hash, since it's used by fq_codel and flow dissection in general. Without it, classification does not proceed as usual. This change might make it easier to estimate the number of innerflows by examining clustering of out of order packets, but this shouldn't open up anything that can't already be inferred otherwise (e.g. syn packet size inference), and fq_codel can be disabled anyway. Furthermore, it might be the case that the hash isn't used or queried at all until after wireguard transmits the encrypted UDP packet, which means skb->hash might still be zero at this point, and thus no hash taken over the inner packet data. In order to address this situation, we force a calculation of skb->hash before encrypting packet data. Of course this means that fq_codel might transmit packets slightly more out of order than usual. Toke did some testing on beefy machines with high quantities of parallel flows and found that increasing the reply-attack counter to 8192 takes care of the most pathological cases pretty well. Reported-by:
Dave Taht <dave.taht@gmail.com> Reviewed-and-tested-by:
Toke Høiland-Jørgensen <toke@toke.dk> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
-
