Merge tag 'davinci-for-v3.14/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

From Sekhar Nori:
DaVinci device tree file updates to add GPIO
support.

* tag 'davinci-for-v3.14/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850 evm: add GPIO pinumux entries DT node
  ARM: davinci: da850: add GPIO DT node
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt

ARM: sirf: dts update for 3.14

From Barry Song:
some missed dt nodes or props for sirf dts for 3.14.
Among them:
 - add lost clocks for cphifbg
 - add lost bus_width, clock and status for sdhci
 - add clock, frequence-voltage table for CPU0
 - add lost minigpsrtc device node
 - add lost usp1_uart_nostreamctrl pin group for atlas6
 - add pin group for USP0 with only RX or TX frame sync

* tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Dinh Nguyen:
SOCFPGA DT updates for v3.14

* tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Maxime Ripard:
Second round of DT additions for 3.14

Mostly:
  - Addition of the missing PLLs and module clocks
  - Addition of the external clocks
  - Addition of the touchscreen controler
  - I2C nodes of the Cubietruck

* tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux:
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ARM: sun4i: dt: Remove chosen nodes
  ARM: sun4i: dt: Move the aliases to the DTSI
  ARM: sunxi: dt: add nodes for the mbus clock
  ARM: sun7i: dt: mod0 clocks
  ARM: sun5i: dt: mod0 clocks
  ARM: sun4i: dt: mod0 clocks
  ARM: sunxi: add PLL5 and PLL6 support
  ARM: sunxi: add PLL4 support
Signed-off-by: Kevin Hilman <khilman@linaro.org>

add pin groups for USP0 only holding one of TX and RX frame sync. this
patch matches with the change in drivers/pinctrl/sirf.
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Barry.Song@csr.com>

this patch adds lost usp1_uart_nostreamctrl pin group for atlas6, which
matches with the change in drivers/pinctrl/sirf/pinctrl-atlas6.c.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

This patch adds lost minigpsrtc device node for prima2 and atlas6,
which is behind rtc-iobg and whose offset is 2000.
Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

prima2 and atlas6 uses cpufreq_cpu0, here we put related clock, operation
points in dtsi.
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

some nodes missed bus_width, clocks and status properties, here we fix them
in prima2 and atlas6 dtsi.
Signed-off-by: Bin Shi <Bin.Shi@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

This patch adds lost clocks property(index 42) for cphifbg node in prima2 and
atlas6 dtsi.
Signed-off-by: Barry Song <Baohua.Song@csr.com>

Merge tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:
Ux500 device tree patches for v3.14, take 2
- Delete some unused U8540 UART platform data.
- MMC/SD-fixes from Ulf Hansson so everything works with
  the device tree again.

* tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: regulators: Remove dead code for SD-card regulator
  ARM: ux500: Configure regulator for I/O voltage for SD-card slot
  ARM: ux500: Refactor common DT configs for sdi[n] devices
  ARM: ux500: delete U8540 UART auxdata
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM Based SoC DT Fixes for v3.14

Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.

Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.

A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.

* tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
  Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
Signed-off-by: Olof Johansson <olof@lixom.net>

The pl330 dmac won't be added to the list of amba devices, as it doesn't have
a clock entry.
Add the clock.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

Sets the appropriate L2-cache latencies for the SOCFPGA platform.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

The Cubietruck makes use of the first three i2c controllers found on the
Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on
the board headers, and i2c-2 is used for DDC on the VGA connector. This
patch enables them in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Merge tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:
Samsung DT 3rd updates for v3.14
- add exynos4412-tiny4412 board dt for FriendlyARM's TINY4412
  board including initial support UART, SD card and LEDs
- add exynos5420-arndale-octa board dt for Arndale Octa board

* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
Signed-off-by: Olof Johansson <olof@lixom.net>

Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
TINY4412 board. This patch including support peripherals like
UART, SD card on SDMMC2 port and GPIO connected LEDs.
Signed-off-by: Alex Ling <kasimling@gmail.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Arndale Octa board is based on Exynos5420 SoC. This patch
adds the basic support required for booting it through DT.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Merge tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Third Round of Renesas ARM Based SoC DT Updates for v3.14

* r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs
  - Add SSI, QSPI and MSIOF  clocks in device tree

r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
  - Remove reference DTS
  - Specify external clock frequency in DT
  - Sync non-reference DTS with referene DTS
  - Add clocks to DTS

* r8a7740 (R-Mobile A1) based Armadillo board
  - Add gpio-keys device
  - Add PWM backlight enable GPIO
  - Add PWM backlight power supply

* r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and
  r8a73a4 (SH-Mobile APE6) SoCs
  - Specify PFC interrupts in DT

* tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits)
  ARM: shmobile: r8a7791: Add SSI clocks in device tree
  ARM: shmobile: r8a7790: Add SSI clocks in device tree
  ARM: shmobile: r8a7791: Add QSPI module clock in device tree
  ARM: shmobile: r8a7790: Add QSPI module clock in device tree
  ARM: shmobile: r8a7791: Add MSIOF clocks in device tree
  ARM: shmobile: r8a7790: Add MSIOF clocks in device tree
  ARM: shmobile: Remove Koelsch reference DTS
  ARM: shmobile: Remove Lager reference DTS
  ARM: shmobile: koelsch: Specify external clock frequency in DT
  ARM: shmobile: lager: Specify external clock frequency in DT
  ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS
  ARM: shmobile: Sync Lager DTS with Lager reference DTS
  ARM: shmobile: r8a7791: Add clocks
  ARM: shmobile: r8a7790: Reference clocks
  ARM: shmobile: r8a7790: Add clocks
  ARM: shmobile: armadillo: dts: Add gpio-keys device
  ARM: shmobile: sh73a0: Specify PFC interrupts in DT
  ARM: shmobile: r8a7740: Specify PFC interrupts in DT
  ARM: shmobile: r8a73a4: Specify PFC interrupts in DT
  ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

The BCM2835 SoC contains a DWC2 USB controller. Add this to the DT.

Set up the pin controller to fully enable the USB controller on the
Raspberry Pi. The GPIO setup works because the default output value for
GPIO 6 (LAN_RUN/n_reset) just happens to be 1, which enables the
USB/LAN chip.

Note that you'll need a U-Boot which enables power to the USB controller;
search for U-Boot patch "ARM: rpi_b: power on SDHCI and USB HW modules".
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

From Maxime Ripard:
Allwinner sunXi DT Additions for 3.14

Various DT related patches, but mostly:
  - Support for the Olimex A13-olinuxino-micro
  - Added the needed IP in the A31 for the HS timer support and SMP bringup
  - A10 and A20 RTC

* tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux:
  ARM: sun6i: dt: Add IP needed to bring up the additional cores
  ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
  ARM: sun6i: Add the reset controller to the DTSI
  ARM: sunxi: dt: add EMAC aliases
  ARM: dts: sun4i/sun7i: add RTC node
Signed-off-by: Olof Johansson <olof@lixom.net>

From Jason Cooper:
mvebu DT changes for v3.14 (incremental #5)

 - mvebu
    - add rtc chip isl12057 node to ReadyNAS boards
    - fix register length in Armada XP pmsu

 - kirkwood
    - sort ocp nodes by address in 6282 dtsi file
    - add 6192 dtsi file
    - add LaPlug board
    - add sata phy node

 - dove
    - add sata phy node

* tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu:
  ARM: Kirkwood: DT board setup for LaPlug
  ARM: Kirkwood: Add 6192 DTSI file
  ARM: mvebu: fix register length for Armada XP PMSU
  ARM: kirkwood: 6282: sort DT nodes by address
  Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
  ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file
  ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file
  ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file
Signed-off-by: Olof Johansson <olof@lixom.net>

* qcom/dt:
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: msm: trout: fix uninit var warning
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the mmio architected timer node.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the restart node so we can reboot the device.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This doesn't need to be a def_bool y. Instead we can have every
DT supported platform select ARCH_MSM_DT and we achieve the same
thing with less chance of conflicts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard
and others. Board support added in separate patch.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: split off SoC support in separate patch]
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix the following warning when !CONFIG_MMC:

arch/arm/mach-msm/board-trout.c: In function 'trout_init':
arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable]
  int rc;
      ^

Also, while we're here, rework explicit printk(KERN_CRIT..) to use
pr_crit.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This commit adds the two external clock outputs available on A20 to
its device tree. A dummy fixed factor clock is also added to serve as
the first input of the clock outputs, which according to AW's A20 user
manual, is the 24MHz oscillator divided by 750.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Device tree naming conventions state that node names should match
the nodes function. Change external low speed oscillator node name
to match.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This patch adds the clock output pin options on the A20.
The 2 pins can output a configurable clock to be used by
external modules. This is used on the CubieTruck, to supply
a 32768 Hz low power clock to the onboard Wifi+BT module.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The chosen nodes are nowadays pretty useless, since they will be overriden by
the bootloader anyway.

We can thus safely remove them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The aliases are shared across boards are really belong to the DTSI.
Move them there.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Merge tag 'sunxi-clk-3.14-for-maxime' of https://bitbucket.org/emiliolopez/linux into sunxi/dt-for-3.14

Allwinner sunXi SoCs DT changes for clocks

This contains the DT parts of the "[PATCH v3 00/13] clk: sunxi: add PLL5
and PLL6 support" series. It adds DT nodes for PLL4/5/6 and mod0 clocks
on most sunxi platforms.

Merge tag 'renesas-dt2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Second Round of Renesas ARM Based SoC DT Updates for v3.13

* r8a7791 (R-Car M2) based Koelsch board
- Add GPIO keys

* sh73a0 (SH-Mobile AG5) based kzm9g board
  - Add FSI support

* tag 'renesas-dt2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: koelsch: dts: Add gpio-keys device
  ARM: shmobile: kzm9g: add FSI support for DTS
  ARM: shmobile: sh73a0: add FSI support via DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>

mbus is the memory bus clock, and it is present on both sun5i and sun7i
machines. Its register layout is compatible with the mod0 one.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This commit adds all the mod0 clocks available on A20 to its device
tree. This list was created by looking at AW's code release.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>