- 17 May, 2005 40 commits
-
-
Johannes Stezenbach authored
fix indentation Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fixed debugging instructions: av7110_debug -> debug (Oliver Endirss) Signed-off-by:
-
Johannes Stezenbach authored
fix NTSC -> PAL switching (std->id is a bitmap!) (Oliver Endriss) Signed-off-by:
-
Johannes Stezenbach authored
VIDEO_SET_DISPLAY_FORMAT ioctl fixed: set videostate.display_format, not videostate.video_format (Oliver Endriss) Signed-off-by:
-
Johannes Stezenbach authored
handle IPv6 and LLC/SNAP (Bertrand Mazieres, Matthieu Castet, Johannes Stezenbach) Signed-off-by:
-
Johannes Stezenbach authored
remove unnecessary casts in dvb-core (Kenneth Aafloy) Signed-off-by:
-
Johannes Stezenbach authored
Support KNC-1 Plus DVB-T and similar KNC-1 cards (Alexander Riedel) Signed-off-by:
-
Johannes Stezenbach authored
Switch analog output of the Crystal sound chip to left/stereo/right mode. This will fix problems with some (most?) channels which do not encode 2-channel audio correctly. (Oliver Endriss) Signed-off-by:
-
Johannes Stezenbach authored
Remove incorrect "dvb_"-prefix from parameter description. Error detected with section2text.rb, see autoparam patch. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
-
Johannes Stezenbach authored
no need to initialize static/global variables to 0 Signed-off-by:
-
Johannes Stezenbach authored
Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss) Signed-off-by:
-
Johannes Stezenbach authored
Fixed DiSeqC switching, which was wrongly taking over from skystar2.c. Thanks to Joerg Riechardt for finding the bug and testing the Fix. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Johannes Stezenbach authored
rewrote the i2c-reading-part (no more ack-error ignoring, which was inherited from the skystar2-driver) Signed-off-by:
-
Johannes Stezenbach authored
readme update Signed-off-by:
-
Johannes Stezenbach authored
Corrected the THIS_MODULE handling for the flexcop-stuff and dvb-usb which lead to oopses because of misorganized module dependencies. Signed-off-by:
-
Johannes Stezenbach authored
- enabled the HW PID by default for the PCI cards - correct the TS demux parsing when PID filter is enabled (and thus the timer IRQ) - rewrote the PID-filter and FULLTS control part in flexcop-hw-filter (thanks to Krzysztof Matula for pointing that out) Signed-off-by:
-
Johannes Stezenbach authored
fixed interrupt-sharing and added a spinlock to the irq-callback (thanks to Pascal Riekenberg) Signed-off-by:
-
Johannes Stezenbach authored
read MAC address directly into dvb_adapter->proposed_mac Signed-off-by:
-
Johannes Stezenbach authored
add acknowledgements Signed-off-by:
-
Johannes Stezenbach authored
- driver receives many null TS packets (pid=0x1fff). They occupy the limited USB bandwidth and this leads to loss of video packets. Enabling the null packet filter fixes this. - packets that flexcop sends to USB have a 2 byte header that has to be removed. - sometimes a TS packet is split between different urbs. These parts have to be combined in a temporary buffer. Signed-off-by:
Vadim Catana <skystar@moldova.cc> Signed-off-by:
-
Johannes Stezenbach authored
b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add modular Flexcop driver Signed-off-by:
-
Johannes Stezenbach authored
b2c2/flexcop driver refactoring to support PCI and USB based cards, part 1: drop abandoned attempt to support USB devices Signed-off-by:
-
Jody McIntyre authored
Set the initial sendtime to be 10 seconds in the future, to avoid the packet timing out while it's still queued to be sent. This fixes furthur "no tlabel match" problems caused by premature expiry. Signed-off-by:
Jody McIntyre <scjody@steamballoon.com> Signed-off-by:
-
Jody McIntyre authored
Fix cross_bound to not return 1 for zero-length regions. Fixes regression when sending null ISO packets. Signed-off-by:
-
Jody McIntyre authored
Apply and fixup patch from Markus Tavenrath <speedygoo@speedygoo.de> for video1394 to allow only a single buffer on receive and two buffers on transmit. Tested with libdc1394 and dvconnect (libdv). Signed-off-by:
Dan Dennedy <dan@dennedy.org> Signed-off-by:
-
Jody McIntyre authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() These patches include dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Jody McIntyre authored
This patch removes redundant NULL pointer checks before kfree() in all of drivers/ieee1394/ Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Jody McIntyre authored
This patch contains the following possible cleanups: - #if 0 the following unused global functions: - hpsb_lock - hpsb_send_gasp - ieee1394_transactions.h: remove the stale hpsb_lock64 prototype Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jody McIntyre authored
The options CONFIG_IEEE1394_PCILYNX_LOCALRAM and CONFIG_IEEE1394_PCILYNX_PORTS are not available for some time. Signed-off-by:
-
Jody McIntyre authored
drivers/ieee1394 feature removal notices: amdtp, cmp, legacy rawiso interface Signed-off-by:
-
William Lee Irwin III authored
profile=schedule parsing is not quite what it should be. First, str[7] is 'e', not ',', but then even if it did fall through, prof_on = SCHED_PROFILING would be clobbered inside if (get_option(...)) So a small amount of rearrangement is done in this patch to correct it. Signed-off-by:
-
Christoph Hellwig authored
These days <linux/ioctl32.h> handles everything, no need for an asm header on just two architectures. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Randy Dunlap authored
register_chrdev() can return errors (negative) other then -EBUSY, so check for any negative error code. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Nishanth Aravamudan authored
Use helper functions to convert between timeval structure and jiffies rather than custom logic. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Domen Puncer <domen@coderock.org> Acked-by:
Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Yoichi Yuasa authored
This patch had added resource management to vr41xx's pmu. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Stephen Smalley authored
This patch should fix the avc_alloc_node() oom condition that Andrew reported when no policy is loaded in SELinux. Prior to this patch, when no policy was loaded, the SELinux "security server" (policy engine) was only returning allowed decisions for the requested permissions for each access check. This caused the cache to thrash when trying to use SELinux for real work with no policy loaded (typically, the no policy loaded state is only for bootstrapping to the point where we can load an initial policy). This patch changes the SELinux security server to return the complete allowed access vector at once, and then to reset the cache after the initial policy load to flush the initial cache state created during bootstrapping. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
-
Kirill Korotaev authored
There is a bug in do_swap_page(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. The fix is to check for PageUptodate and send SIGBUS in case of error. Signed-Off-By:
Kirill Korotaev <dev@sw.ru> Signed-Off-By:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Acked-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Andrew Morton authored
If block_read_full_page() detects an error when running get_block() it will run SetPageError(), then it will zero out the block in pagecache and will mark the buffer_head uptodate. So at the end of readahead we end up with a non-uptodate pagecache page which is marked PageError. But it has uptodate buffers. The pagefault code will run ClearPageError, will launch readpage a second time and block_read_full_page() will notice the uptodate buffers and will mark the page uptodate as well. We end up with an uptodate, !PageError page full of zeros and the error is lost. (It seems a little odd that filemap_nopage() runs ClearPageError(). I guess all of this adds up to meaning that for each attempted access to the page, the pagefault handler will retry the I/O. Which is good and bad. If the app is ignoring SIGBUS for some reason we could get a lot of back-to-back I/O errors.) Fix it by not marking the pagecache buffer_head as uptodate if the attempt to map that buffer to a disk block failed. Credit-to: Qu Fuping <fs@ercist.iscas.ac.cn> For reporting the bug and identifying its source. Signed-off-by:
Qu Fuping <fs@ercist.iscas.ac.cn> Signed-off-by:
-
Matt Mackall authored
Move add_preferred_console out of CONFIG_PRINTK so serial console does the right thing. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Rik van Riel authored
The arch Makefile may override the include path order, which is used by Xen (and UML?) to make sure include/asm-xen is searched before include/asm-i386. The Makefile change to 2.6.12-rc4 made the top Makefile always override the value specified by the arch Makefile. This trivial patch makes the Xen kernel compile again. Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
