Santosh Shilimkar says:

====================
rds fixes

Few rds fixes which makes rds rdma transport reliably working on mainline

First two fixes are applicable to v4.11+ stable versions and last
three patches applies to only v5.1 stable and current mainline.

Patchset is re-based against 'net' and also available on below tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-07-11

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.15
('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn')

For -stable v5.1
('net/mlx5e: Fix port tunnel GRE entropy control')
('net/mlx5e: Rx, Fix checksum calculation for new hardware')
('net/mlx5e: Fix return value from timeout recover function')
('net/mlx5e: Fix error flow in tx reporter diagnose')

For -stable v5.2
('net/mlx5: E-Switch, Fix default encap mode')

Conflict note: This pull request will produce a small conflict when
merged with net-next.
In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
Take the hunk from net and replace:
esw_offloads_steering_init(esw, vf_nvports, total_nvports);
with:
esw_offloads_steering_init(esw);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 build fixes

I know net-next is closed but these patches are fixing some compiler
build and warnings issues people have been complaining about.

I hope it is not too late, but in case it is a lot of trouble for you,
I guess they can wait.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following compiler warning:
In function ‘esw_vport_add_ingress_acl_modify_metadata’:
the frame size of 1084 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Since the structure is never written to, we can statically allocate
it to avoid the stack usage.

Fixes: 7445cfb1 ("net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mlx5e_setup_tc "priv" variable is not being used if
CONFIG_MLX5_ESWITCH is off, one way to fix this is to actually use it.

mlx5e_setup_tc_mqprio also needs the "priv" variable and it extracts it
on its own. We can simply pass priv to mlx5e_setup_tc_mqprio instead of
netdev and avoid extracting the priv var, which will also resolve the
compiler warning.

Fixes: 4e95bc26 ("net: flow_offload: add flow_block_cb_setup_simple()")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the cited patch below, the Kconfig flags combination of:
CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_TLS=y
CONFIG_MLX5_EN_TLS=y

leads to the compilation error:

./include/linux/mlx5/device.h:61:39: error: invalid application of
sizeof to incomplete type struct mlx5_ifc_tls_flow_bits.

Fix it.

Fixes: 90687e1a9a50 ("net/mlx5: Kconfig, Better organize compilation flags")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CC: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fl_create() should call static_branch_deferred_inc() only in
case of success.

Also we should not call fl_free() in error path, as this could
cause a static key imbalance.

jump label: negative count!
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec kernel/jump_label.c:221 [inline]
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 15907 Comm: syz-executor.2 Not tainted 5.2.0-rc6+ #62
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2cb/0x744 kernel/panic.c:219
 __warn.cold+0x20/0x4d kernel/panic.c:576
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:179 [inline]
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:986
RIP: 0010:static_key_slow_try_dec kernel/jump_label.c:221 [inline]
RIP: 0010:static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Code: c0 e8 e9 3e e5 ff 83 fb 01 0f 85 32 ff ff ff e8 5b 3d e5 ff 45 31 ff eb a0 e8 51 3d e5 ff 48 c7 c7 40 99 92 87 e8 13 75 b7 ff <0f> 0b eb 8b 4c 89 e7 e8 a9 c0 1e 00 e9 de fe ff ff e8 bf 6d b7 ff
RSP: 0018:ffff88805f9c7450 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000000000e3e1 RSI: ffffffff815adb06 RDI: ffffed100bf38e7c
RBP: ffff88805f9c74e0 R08: ffff88806acf0700 R09: ffffed1015d060a9
R10: ffffed1015d060a8 R11: ffff8880ae830547 R12: ffffffff89832ce0
R13: ffff88805f9c74b8 R14: 1ffff1100bf38e8b R15: 00000000ffffff01
 __static_key_slow_dec_deferred+0x65/0x110 kernel/jump_label.c:272
 fl_free+0xa9/0xe0 net/ipv6/ip6_flowlabel.c:121
 fl_create+0x6af/0x9f0 net/ipv6/ip6_flowlabel.c:457
 ipv6_flowlabel_opt+0x80e/0x2730 net/ipv6/ip6_flowlabel.c:624
 do_ipv6_setsockopt.isra.0+0x2119/0x4100 net/ipv6/ipv6_sockglue.c:825
 ipv6_setsockopt+0xf6/0x170 net/ipv6/ipv6_sockglue.c:944
 tcp_setsockopt net/ipv4/tcp.c:3131 [inline]
 tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3125
 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3130
 __sys_setsockopt+0x253/0x4b0 net/socket.c:2080
 __do_sys_setsockopt net/socket.c:2096 [inline]
 __se_sys_setsockopt net/socket.c:2093 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2093
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2670556c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004597c9
RDX: 0000000000000020 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 000000000075bfc8 R08: 000000000000fdf7 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f26705576d4
R13: 00000000004cec00 R14: 00000000004dd520 R15: 00000000ffffffff
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Willem forgot to change one of the calls to fl6_sock_lookup(),
which can now return an error or NULL.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 31763 Comm: syz-executor.0 Not tainted 5.2.0-rc6+ #63
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee
RSP: 0018:ffff88809ba97ae0 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff8880a81254b0 RCX: ffffc90008118000
RDX: 0000000000000003 RSI: ffffffff86319a84 RDI: 000000000000001e
RBP: ffff88809ba97c10 R08: ffff888065e9e700 R09: ffffed1015d26c80
R10: ffffed1015d26c7f R11: ffff8880ae9363fb R12: ffff8880a8124f40
R13: 0000000000000001 R14: fffffffffffffffe R15: ffff88809ba97b40
FS:  00007f38e606a700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000202c0140 CR3: 00000000a026a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __ip6_datagram_connect+0x5e9/0x1390 net/ipv6/datagram.c:246
 ip6_datagram_connect+0x30/0x50 net/ipv6/datagram.c:269
 ip6_datagram_connect_v6_only+0x69/0x90 net/ipv6/datagram.c:281
 inet_dgram_connect+0x14a/0x2d0 net/ipv4/af_inet.c:571
 __sys_connect+0x264/0x330 net/socket.c:1824
 __do_sys_connect net/socket.c:1835 [inline]
 __se_sys_connect net/socket.c:1832 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1832
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f38e6069c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004597c9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f38e606a6d4
R13: 00000000004bfd07 R14: 00000000004d1838 R15: 00000000ffffffff
Modules linked in:
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 323a53c4 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
and 50a8accf ("ipv6: tcp: send consistent flowlabel in TIME_WAIT state")
we took care of IPv6 flowlabel reflections for two cases.

This patch takes care of the remaining case, when the RST packet
is sent on behalf of a 'full' socket.

In Marek use case, this was a socket in TCP_CLOSE state.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The length of AH header is computed manually as (hp->hdrlen+2)<<2.
However, in include/linux/ipv6.h, a macro named ipv6_authlen is
already defined for exactly the same job. This commit replaces
the manual computation code with the macro.
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switching from ->priv_destructor to dellink() has an unexpected
consequence: existing RCU readers, that is, hsr_port_get_hsr()
callers, may still be able to read the port list.

Instead of checking the return value of each hsr_port_get_hsr(),
we can just move it to ->ndo_uninit() which is called after
device unregister and synchronize_net(), and we still have RTNL
lock there.

Fixes: b9a1e627 ("hsr: implement dellink to clean up resources")
Fixes: edf070a0 ("hsr: fix a NULL pointer deref in hsr_dev_xmit()")
Reported-by: syzbot+097ef84cdc95843fbaa8@syzkaller.appspotmail.com
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arguments are supposed to be ordered high then low.

Fixes: 293e4365 ("stmmac: change descriptor layout")
Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rules matching on loopback iif do not need early flow dissection as the
packet originates from the host. Stop counting such rules in
fib_rule_requires_fldissect
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check return value from mlx5e_attach_netdev, add error path on failure.

Fixes: 48935bbb ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fix tx reporter's diagnose callback. Propagate error when failing to
gather diagnostics information or failing to print diagnostic data per
queue.

Fixes: de8650a8 ("net/mlx5e: Add tx reporter support")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fix timeout recover function to return a meaningful return value.
When an interrupt was not sent by the FW, return IO error instead of
'true'.

Fixes: c7981bea ("net/mlx5e: Fix return status of TX reporter timeout recover")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

CQE checksum full mode in new HW, provides a full checksum of rx frame.
Covering bytes starting from eth protocol up to last byte in the received
frame (frame_size - ETH_HLEN), as expected by the stack.

Fixing up skb->csum by the driver is not required in such case. This fix
is to avoid wrong checksum calculation in drivers which already support
the new hardware with the new checksum mode.

Fixes: 85327a9c ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

GRE entropy calculation is a single bit per card, and not per port.
Force disable GRE entropy calculation upon the first GRE encap rule,
and release the force at the last GRE encap rule removal. This is done
per port.

Fixes: 97417f61 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Encap mode is related to switchdev mode only. Move the init of
the encap mode to eswitch_offloads. Before this change, we reported
that eswitch supports encap, even tough the device was in non
SRIOV mode.

Fixes: 7768d197 ('net/mlx5: E-Switch, Add control for encapsulation')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent ACPICA commit causing systems to hang at boot time"

* tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: Update table load object initialization"

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

Pull clone3 system call from Christian Brauner:
 "This adds the clone3 syscall which is an extensible successor to clone
  after we snagged the last flag with CLONE_PIDFD during the 5.2 merge
  window for clone(). It cleanly supports all of the flags from clone()
  and thus all legacy workloads.

  There are few user visible differences between clone3 and clone.
  First, CLONE_DETACHED will cause EINVAL with clone3 so we can reuse
  this flag. Second, the CSIGNAL flag is deprecated and will cause
  EINVAL to be reported. It is superseeded by a dedicated "exit_signal"
  argument in struct clone_args thus freeing up even more flags. And
  third, clone3 gives CLONE_PIDFD a dedicated return argument in struct
  clone_args instead of abusing CLONE_PARENT_SETTID's parent_tidptr
  argument.

  The clone3 uapi is designed to be easy to handle on 32- and 64 bit:

    /* uapi */
    struct clone_args {
            __aligned_u64 flags;
            __aligned_u64 pidfd;
            __aligned_u64 child_tid;
            __aligned_u64 parent_tid;
            __aligned_u64 exit_signal;
            __aligned_u64 stack;
            __aligned_u64 stack_size;
            __aligned_u64 tls;
    };

  and a separate kernel struct is used that uses proper kernel typing:

    /* kernel internal */
    struct kernel_clone_args {
            u64 flags;
            int __user *pidfd;
            int __user *child_tid;
            int __user *parent_tid;
            int exit_signal;
            unsigned long stack;
            unsigned long stack_size;
            unsigned long tls;
    };

  The system call comes with a size argument which enables the kernel to
  detect what version of clone_args userspace is passing in. clone3
  validates that any additional bytes a given kernel does not know about
  are set to zero and that the size never exceeds a page.

  A nice feature is that this patchset allowed us to cleanup and
  simplify various core kernel codepaths in kernel/fork.c by making the
  internal _do_fork() function take struct kernel_clone_args even for
  legacy clone().

  This patch also unblocks the time namespace patchset which wants to
  introduce a new CLONE_TIMENS flag.

  Note, that clone3 has only been wired up for x86{_32,64}, arm{64}, and
  xtensa. These were the architectures that did not require special
  massaging.

  Other architectures treat fork-like system calls individually and
  after some back and forth neither Arnd nor I felt confident that we
  dared to add clone3 unconditionally to all architectures. We agreed to
  leave this up to individual architecture maintainers. This is why
  there's an additional patch that introduces __ARCH_WANT_SYS_CLONE3
  which any architecture can set once it has implemented support for
  clone3. The patch also adds a cond_syscall(clone3) for architectures
  such as nios2 or h8300 that generate their syscall table by simply
  including asm-generic/unistd.h. The hope is to get rid of
  __ARCH_WANT_SYS_CLONE3 and cond_syscall() rather soon"

* tag 'clone3-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  arch: handle arches who do not yet define clone3
  arch: wire-up clone3() syscall
  fork: add clone3

Pull pidfd updates from Christian Brauner:
 "This adds two main features.

   - First, it adds polling support for pidfds. This allows process
     managers to know when a (non-parent) process dies in a race-free
     way.

     The notification mechanism used follows the same logic that is
     currently used when the parent of a task is notified of a child's
     death. With this patchset it is possible to put pidfds in an
     {e}poll loop and get reliable notifications for process (i.e.
     thread-group) exit.

   - The second feature compliments the first one by making it possible
     to retrieve pollable pidfds for processes that were not created
     using CLONE_PIDFD.

     A lot of processes get created with traditional PID-based calls
     such as fork() or clone() (without CLONE_PIDFD). For these
     processes a caller can currently not create a pollable pidfd. This
     is a problem for Android's low memory killer (LMK) and service
     managers such as systemd.

  Both patchsets are accompanied by selftests.

  It's perhaps worth noting that the work done so far and the work done
  in this branch for pidfd_open() and polling support do already see
  some adoption:

   - Android is in the process of backporting this work to all their LTS
     kernels [1]

   - Service managers make use of pidfd_send_signal but will need to
     wait until we enable waiting on pidfds for full adoption.

   - And projects I maintain make use of both pidfd_send_signal and
     CLONE_PIDFD [2] and will use polling support and pidfd_open() too"

[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22

[2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753

* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add pidfd_open() tests
  arch: wire-up pidfd_open()
  pid: add pidfd_open()
  pidfd: add polling selftests
  pidfd: add polling support

Pull m68k fix from Geert Uytterhoeven:
 "Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire.

  This is a fix for an issue detected in next, to avoid introducing
  build failures when merging Christoph's dma-mapping tree later"

* tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire

Pull m68nommu updates from Greg Ungerer:
 "A series of cleanups for the FLAT format binary loader, binfmt_flat,
  from Christoph.

  The end goal is to support no-MMU on RISC-V, and the last patch
  enables that"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  riscv: add binfmt_flat support
  binfmt_flat: don't offset the data start
  binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c
  binfmt_flat: remove the persistent argument from flat_get_addr_from_rp
  binfmt_flat: provide an asm-generic/flat.h
  binfmt_flat: make support for old format binaries optional
  binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option
  binfmt_flat: add endianess annotations
  binfmt_flat: use fixed size type for the on-disk format
  binfmt_flat: consolidate two version of flat_v2_reloc_t
  binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition
  binfmt_flat: remove the uapi <linux/flat.h> header
  binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable
  binfmt_flat: remove flat_old_ram_flag
  binfmt_flat: provide a default version of flat_get_relocate_addr
  binfmt_flat: remove flat_set_persistent
  binfmt_flat: remove flat_reloc_valid

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Add a new /proc/fs/nfsd/clients/ directory which exposes some
     long-requested information about NFSv4 clients (like open files)
     and allows forced revocation of client state.

   - Replace the global duplicate reply cache by a cache per network
     namespace; previously, a request in one network namespace could
     incorrectly match an entry from another, though we haven't seen
     this in production. This is the last remaining container bug that
     I'm aware of; at this point you should be able to run separate
     nfsd's in each network namespace, each with their own set of
     exports, and everything should work.

   - Cleanup and modify lock code to show the pid of lockd as the owner
     of NLM locks. This is the correct version of the bugfix originally
     attempted in b8eee0e9 ("lockd: Show pid of lockd for remote
     locks")"

* tag 'nfsd-5.3' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Make __get_nfsdfs_client() static
  nfsd: Make two functions static
  nfsd: Fix misuse of strlcpy
  sunrpc/cache: remove the exporting of cache_seq_next
  nfsd: decode implementation id
  nfsd: create xdr_netobj_dup helper
  nfsd: allow forced expiration of NFSv4 clients
  nfsd: create get_nfsdfs_clp helper
  nfsd4: show layout stateids
  nfsd: show lock and deleg stateids
  nfsd4: add file to display list of client's opens
  nfsd: add more information to client info file
  nfsd: escape high characters in binary data
  nfsd: copy client's address including port number to cl_addr
  nfsd4: add a client info file
  nfsd: make client/ directory names small ints
  nfsd: add nfsd/clients directory
  nfsd4: use reference count to free client
  nfsd: rename cl_refcount
  nfsd: persist nfsd filesystem across mounts
  ...

Pull gfs2 updates from Andreas Gruenbacher:
 "Some relatively minor changes for gfs2:

   - An initial batch of obvious cleanups and fixes from Bob's recovery
     patch queue.

   - Two iomap conversion patches and some cleanups from Christoph
     Hellwig.

   - A cosmetic cleanup from Kefeng Wang (Huawei).

   - Another minor fix and cleanup by me"

* tag 'gfs2-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Remove unused gfs2_iomap_alloc argument
  gfs2: don't use buffer_heads in gfs2_allocate_page_backing
  gfs2: use iomap_bmap instead of generic_block_bmap
  gfs2: mark stuffed_readpage static
  gfs2: merge gfs2_writepage_common into gfs2_writepage
  gfs2: merge gfs2_writeback_aops and gfs2_ordered_aops
  gfs2: remove the unused gfs2_stuffed_write_end function
  gfs2: use page_offset in gfs2_page_mkwrite
  gfs2: replace more printk with calls to fs_info and friends
  gfs2: dump fsid when dumping glock problems
  gfs2: simplify gfs2_freeze by removing case
  gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN
  gfs2: Warn when a journal replay overwrites a rgrp with buffers
  gfs2: log which portion of the journal is replayed
  gfs2: eliminate tr_num_revoke_rm
  gfs2: kthread and remount improvements
  gfs2: Use IS_ERR_OR_NULL
  gfs2: Clean up freeing struct gfs2_sbd

Pull ext4 updates from Ted Ts'o:
 "Many bug fixes and cleanups, and an optimization for case-insensitive
  lookups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix coverity warning on error path of filename setup
  ext4: replace ktype default_attrs with default_groups
  ext4: rename htree_inline_dir_to_tree() to ext4_inlinedir_to_tree()
  ext4: refactor initialize_dirent_tail()
  ext4: rename "dirent_csum" functions to use "dirblock"
  ext4: allow directory holes
  jbd2: drop declaration of journal_sync_buffer()
  ext4: use jbd2_inode dirty range scoping
  jbd2: introduce jbd2_inode dirty range scoping
  mm: add filemap_fdatawait_range_keep_errors()
  ext4: remove redundant assignment to node
  ext4: optimize case-insensitive lookups
  ext4: make __ext4_get_inode_loc plug
  ext4: clean up kerneldoc warnigns when building with W=1
  ext4: only set project inherit bit for directory
  ext4: enforce the immutable flag on open files
  ext4: don't allow any modifications to an immutable file
  jbd2: fix typo in comment of journal_submit_inode_data_buffers
  jbd2: fix some print format mistakes
  ext4: gracefully handle ext4_break_layouts() failure during truncate

Pull afs updates from David Howells:
 "A set of minor changes for AFS:

   - Remove an unnecessary check in afs_unlink()

   - Add a tracepoint for tracking callback management

   - Add a tracepoint for afs_server object usage

   - Use struct_size()

   - Add mappings for AFS UAE abort codes to Linux error codes, using
     symbolic names rather than hex numbers in the .c file"

* tag 'afs-next-20190628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Add support for the UAE error table
  fs/afs: use struct_size() in kzalloc()
  afs: Trace afs_server usage
  afs: Add some callback management tracepoints
  afs: afs_unlink() doesn't need to check dentry->d_inode

Pull fscrypt updates from Eric Biggers:

 - Preparations for supporting encryption on ext4 filesystems where the
   filesystem block size is smaller than PAGE_SIZE.

 - Don't allow setting encryption policies on dead directories.

 - Various cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: document testing with xfstests
  fscrypt: remove selection of CONFIG_CRYPTO_SHA256
  fscrypt: remove unnecessary includes of ratelimit.h
  fscrypt: don't set policy for a dead directory
  ext4: encrypt only up to last block in ext4_bio_write_page()
  ext4: decrypt only the needed block in __ext4_block_zero_page_range()
  ext4: decrypt only the needed blocks in ext4_block_write_begin()
  ext4: clear BH_Uptodate flag on decryption error
  fscrypt: decrypt only the needed blocks in __fscrypt_decrypt_bio()
  fscrypt: support decrypting multiple filesystem blocks per page
  fscrypt: introduce fscrypt_decrypt_block_inplace()
  fscrypt: handle blocksize < PAGE_SIZE in fscrypt_zeroout_range()
  fscrypt: support encrypting multiple filesystem blocks per page
  fscrypt: introduce fscrypt_encrypt_block_inplace()
  fscrypt: clean up some BUG_ON()s in block encryption/decryption
  fscrypt: rename fscrypt_do_page_crypto() to fscrypt_crypt_block()
  fscrypt: remove the "write" part of struct fscrypt_ctx
  fscrypt: simplify bounce page handling

Pull copy_file_range updates from Darrick Wong:
 "This fixes numerous parameter checking problems and inconsistent
  behaviors in the new(ish) copy_file_range system call.

  Now the system call will actually check its range parameters
  correctly; refuse to copy into files for which the caller does not
  have sufficient privileges; update mtime and strip setuid like file
  writes are supposed to do; and allows copying up to the EOF of the
  source file instead of failing the call like we used to.

  Summary:

   - Create a generic copy_file_range handler and make individual
     filesystems responsible for calling it (i.e. no more assuming that
     do_splice_direct will work or is appropriate)

   - Refactor copy_file_range and remap_range parameter checking where
     they are the same

   - Install missing copy_file_range parameter checking(!)

   - Remove suid/sgid and update mtime like any other file write

   - Change the behavior so that a copy range crossing the source file's
     eof will result in a short copy to the source file's eof instead of
     EINVAL

   - Permit filesystems to decide if they want to handle
     cross-superblock copy_file_range in their local handlers"

* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fuse: copy_file_range needs to strip setuid bits and update timestamps
  vfs: allow copy_file_range to copy across devices
  xfs: use file_modified() helper
  vfs: introduce file_modified() helper
  vfs: add missing checks to copy_file_range
  vfs: remove redundant checks from generic_remap_checks()
  vfs: introduce generic_file_rw_checks()
  vfs: no fallback for ->copy_file_range
  vfs: introduce generic_copy_file_range()

Pull iomap updates from Darrick Wong:
 "There are a few fixes for gfs2 but otherwise it's pretty quiet so far.

   - Only mark inode dirty at the end of writing to a file (instead of
     once for every page written).

   - Fix for an accounting error in the page_done callback"

* tag 'iomap-5.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix page_done callback for short writes
  fs: fold __generic_write_end back into generic_write_end
  iomap: don't mark the inode dirty in iomap_write_end

Pull ext2, udf and quota updates from Jan Kara:

 - some ext2 fixes and cleanups

 - a fix of udf bug when extending files

 - a fix of quota Q_XGETQSTAT[V] handling

* tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
  ext2: Use kmemdup rather than duplicating its implementation
  quota: honor quota type in Q_XGETQSTAT[V] calls
  ext2: Always brelse bh on failure in ext2_iget()
  ext2: add missing brelse() in ext2_iget()
  ext2: Fix a typo in ext2_getattr argument
  ext2: fix a typo in comment
  ext2: add missing brelse() in ext2_new_inode()
  ext2: optimize ext2_xattr_get()
  ext2: introduce new helper for xattr entry comparison
  ext2: merge xattr next entry check to ext2_xattr_entry_valid()
  ext2: code cleanup for ext2_preread_inode()
  ext2: code cleanup by using test_opt() and clear_opt()
  doc: ext2: update description of quota options for ext2
  ext2: Strengthen xattr block checks
  ext2: Merge loops in ext2_xattr_set()
  ext2: introduce helper for xattr entry validation
  ext2: introduce helper for xattr header validation
  quota: add dqi_dirty_list description to comment of Dquot List Management

Pull fsnotify updates from Jan Kara:
 "This contains cleanups of the fsnotify name removal hook and also a
  patch to disable fanotify permission events for 'proc' filesystem"

* tag 'fsnotify_for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: get rid of fsnotify_nameremove()
  fsnotify: move fsnotify_nameremove() hook out of d_delete()
  configfs: call fsnotify_rmdir() hook
  debugfs: call fsnotify_{unlink,rmdir}() hooks
  debugfs: simplify __debugfs_remove_file()
  devpts: call fsnotify_unlink() hook
  tracefs: call fsnotify_{unlink,rmdir}() hooks
  rpc_pipefs: call fsnotify_{unlink,rmdir}() hooks
  btrfs: call fsnotify_rmdir() hook
  fsnotify: add empty fsnotify_{unlink,rmdir}() hooks
  fanotify: Disallow permission events for proc filesystem

Pull file locking updates from Jeff Layton:
 "Just a couple of small lease-related patches this cycle.

  One from Ira to add a new tracepoint that fires during lease conflict
  checks, and another patch from Amir to reduce false positives when
  checking for lease conflicts"

* tag 'locks-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: eliminate false positive conflicts for write lease
  locks: Add trace_leases_conflict

Revert "Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs"

This reverts merge 0f75ef6a (and thus
effectively commits

   7a1ade84 ("keys: Provide KEYCTL_GRANT_PERMISSION")
   2e12256b ("keys: Replace uid/gid/perm permissions checking with an ACL")

that the merge brought in).

It turns out that it breaks booting with an encrypted volume, and Eric
biggers reports that it also breaks the fscrypt tests [1] and loading of
in-kernel X.509 certificates [2].

The root cause of all the breakage is likely the same, but David Howells
is off email so rather than try to work it out it's getting reverted in
order to not impact the rest of the merge window.

 [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/
 [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/

Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert commit c522ad06 ("ACPICA: Update table load object
initialization") as it causes systems to hang on attempts to load
OEM ACPI tables.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.

Two particular errors have been observed when extending a file:

1. The final extent is larger than it should be, having been rounded up
   to a multiple of the block size.

B. The final extent is not shorter than it should be, due to not having
   been updated when the file's information length was increased.

[JK: simplified udf_do_extend_final_block(), fixed up some types]

Fixes: 2c948b3f ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.comSigned-off-by: Jan Kara <jack@suse.cz>

Connections with legitimate tos values can get into usual connection
race. It can result in consumer reject. We don't want tos value or
protocol version to be demoted for such connections otherwise
piers would end up different tos values which can results in
no connection. Example a peer initiated connection with say
tos 8 while usual connection racing can get downgraded to tos 0
which is not desirable.

Patch fixes above issue introduced by commit
commit d021fabf ("rds: rdma: add consumer reject")
Reported-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Tested-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>