- 15 Apr, 2020 19 commits
-
-
Seppo Ingalsuo authored
This patch changes the flexible array member pdm[] into a fixed array of four that is the max. number of stereo PDM controllers in the current Intel platforms. The change simplifies DMIC DAI load code and aligns the IPC with other DAI types. The change is compatible with old and new firmware with similar change. The ABI minor version is increased due to change in IPC headers. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200415202816.934-18-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Seppo Ingalsuo authored
This patch fixes the typo in word "microphone". Signed-off-by:
-
Artur Kloniecki authored
Currently if a component source buffer underruns or a component sink buffer overruns the pipeline will enter an XRUN status and attempt recovery. This is desired in most pipelines but some topologies need to support use cases where we expect buffers to underrun or overrun. Host ---> Proc----> Selector0 --> Buf0 ---- > DAI Playback | v Buf1 | v Host <---------------Selector1 <----- Buf2 <----- Echo Ref DAI In the example above we two host PCMs that can be independently started/stopped thereby causing buf1 to either underrun or overrun (and stop the pipelines). Buf1 should be permitted to underrun or overrun without invoking pipeline XRUN logic and should over write oldest data (for overrun) and readback 0s (for underrun). 2 flags have been added for use during buffer instantiation: SOF_BUF_OVERRUN_PERMITTED and SOF_BUF_UNDERRUN_PERMITTED, along with struct sof_ipc_buffer member fields: flags and reserved. Flags field is supposed to hold the above-mentioned flags to allow some control over XRUN behaviour. Also added reserved field to the structure in case it comes in handy some time in the future. This is an incremental ABI change as the new fields are ignored by older versions of the firmware. Signed-off-by:Artur Kloniecki <arturx.kloniecki@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
Align struct sof_ipc_cc_version to firmware definition in SOF ABI 3.15.0. The struct definition was changed due to errors in FW build. The Cadence XCC compiler produces incorrect linkage section sizes, when a variable length array is used in the compiler version struct. The firmware definition was changed to a fixed 32 byte compiler description string. This length covers all released firmware binaries and thus only a minor ABI change is needed. As the same structure is used in IPC messages between driver and firmware, the kernel needs to be aligned to firmware change. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Add new debug ABI version to be increased when changing user space debug interfaces while the the main FW ABI is not affected. The abi_dbg_version share same definition with SOF_ABI_VER This change main ABI to 3.14.0 Signed-off-by:
-
Pan Xiuli authored
Share how many injection probe DMAs and how many probe points driver can request from FW. injection_dmas_max 0 means injection is not supported probe_points_max 0 means whole probes subsystem in FW is not enabled and not compiled in. ABI version change to 3.14.0 Signed-off-by:
-
Sebastiano Carlucci authored
This commit adds the enumerations to support the dc blocker component from SOF. Signed-off-by:
Sebastiano Carlucci <scarlucci@google.com> Signed-off-by:
Curtis Malainey <curtis@malainey.com> Reviewed-by:
Seppo Ingalsuo <seppo.ingalsuo@intel.com> Reviewed-by:
-
Karol Trzcinski authored
The compiler version and description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Karol Trzcinski authored
The window description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
The firmware version can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
Extended manifest is a place to store build time known firmware metadata, for example firmware version or used compiler description. Given information is read on host side before firmware startup. This part of output binary is located as a first structure in binary file. Extended manifest should be skipped in firmware loading routine. Signed-off-by:
-
Karol Trzcinski authored
It makes possible to provide extra information to host before downloading firmware. Extra data should be put at the beginning of firmware binary. Exchange is done without any effort on DSP side. This mechanism will be used in extended manifest. Signed-off-by:
-
Karol Trzcinski authored
This pointer can be mark as const to indicate that it is read only pointer. Signed-off-by:
-
Bard Liao authored
Currently, when connecting a DAI widget to the BE CPU DAI, we overwrite the previous connections. This worked because we only ever had 1 CPU DAI for each rtd until now. But with multiple CPU DAI's, a new connection between a BE CPU DAI and the DAI widget should be established without affecting the previous connections. So, modify the loop to set the playback/capture widget for the first BE CPU DAI that does not have a connection established previously. Fixes: 4a7e26a4d833 ("ASoC: SOF: topology: connect dai widget to all cpu-dais") Signed-off-by:Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Tang Bin authored
In the function fsl_micfil_probe(), when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
Shengju Zhang <zhangshengju@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200415044513.17492-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Pierre-Louis Bossart authored
Use macro and solve compilation issues Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 14 Apr, 2020 21 commits
-
-
Mark Brown authored
-
Mark Brown authored
Merge series "ASoC: SOF: adjust dmesg verbosity" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Decrease the dmesg verbosity to remove unnecessary logs on SoundWire platforms, and conversely add more information to help the community and downstream distros with HDaudio/SOF support (DMIC detection and card instanciation are the most prevalent issues on GitHub). Pierre-Louis Bossart (3): ASoC: codecs: rt1308-sdw: reduce verbosity ASoC: SOF: Intel: hda: reduce verbosity on SoundWire detection ASoC: SOF: Intel: hda: log number of microphones detected in NHLT tables Ranjani Sridharan (1): ASoC: soc-core: Add dynamic debug logs in soc_dai_link_sanity_check() sound/soc/codecs/rt1308-sdw.c | 4 ++-- sound/soc/soc-core.c | 18 +++++++++++++++--- sound/soc/sof/intel/hda.c | 10 ++++++---- 3 files changed, 23 insertions(+), 9 deletions(-) base-commit: dd8e871d -- 2.20.1 -
Mark Brown authored
Merge series "ASoC: SOF: trivial code cleanups" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Fix warnings reported by tools - no functionality change. Payal Kshirsagar (2): ASoC: SOF: remove unneeded variables ASoC: SOF: Intel: hda: remove unnecessary parentheses sound/soc/sof/intel/hda-codec.c | 5 +---- sound/soc/sof/intel/hda-dsp.c | 8 ++++---- sound/soc/sof/nocodec.c | 6 ++---- 3 files changed, 7 insertions(+), 12 deletions(-) base-commit: dd8e871d -- 2.20.1
-
Mark Brown authored
Merge series "Support headset on Tegra boards that use WM8903" from Dmitry Osipenko <digetx@gmail.com>: Hello, Some devices have a 4-pin jack instead of a 3-pin and currently the WM8903 configuration is hardcoded to the case of 3-pin jack in the Tegra's ASoC driver. A new device-tree property is required in order to convey that hardware has a 4-pin jack, and thus, microphone's detection needs to be done in a different way. In particular this is needed for Acer A500 tablet device that has a 4-pin headset jack, otherwise userspace sees headset instead of headphones and internal microphone isn't enabled by ALSA UCM rule when it should be. Please review and apply, thanks in advance. Dmitry Osipenko (2): dt-bindings: sound: tegra-wm8903: Document new nvidia,headset property ASoC: tegra: tegra_wm8903: Support nvidia,headset property .../devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt | 1 + sound/soc/tegra/tegra_wm8903.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: Intel: machine drivers update for 5.8" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset a) adds support for the Intel ElkhartLake platforms b)aligns the HDaudio mic detection with the snd-hda-intel driver c) correct DMIC missing configurations d) fixes initialization/compilation problems for SoundWire platforms d) completes the removal of codec_dais missing in Morimoto-san's series. Bard Liao (1): ASoC: intel: sof_sdw: init all aggregated codecs Hui Wang (1): ASoC: intel/skl/hda - set autosuspend timeout for hda codecs Keyon Jie (1): ASoC: Intel: sof-da7219-max98373: add DMIC widget and route Libin Yang (3): ALSA: hda: Add ElkhartLake HDMI codec vid ASoC: SOF: Intel: add PCI ID for ElkhartLake ASoC: Intel: boards: support Elkhart Lake with rt5660 Pierre-Louis Bossart (6): ASoC: Intel: sof_sdw_hdmi: fix compilation issue in fallback mode ASoC: Intel: sof_sdw_hdmi: remove codec_dai use ASoC: Intel: sof_sdw_rt1308: remove codec dai use ASoC: Intel: sof_sdw_rt5682: remove codec_dai use ASoC: Intel: sof_sdw_rt700: remove codec_dai use ASoC: Intel: sof_sdw_rt711: remove codec_dai use Yong Zhi (1): ASoC: Intel: sof_da7219_max98373: Add BE dailink for dmic16k sound/pci/hda/patch_hdmi.c | 1 + sound/soc/intel/boards/Kconfig | 15 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/ehl_rt5660.c | 323 ++++++++++++++++++ sound/soc/intel/boards/skl_hda_dsp_generic.c | 29 +- sound/soc/intel/boards/sof_da7219_max98373.c | 21 ++ sound/soc/intel/boards/sof_sdw.c | 41 ++- sound/soc/intel/boards/sof_sdw_hdmi.c | 4 +- sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +- sound/soc/intel/boards/sof_sdw_rt5682.c | 3 +- sound/soc/intel/boards/sof_sdw_rt700.c | 3 +- sound/soc/intel/boards/sof_sdw_rt711.c | 3 +- .../intel/common/soc-acpi-intel-ehl-match.c | 7 + sound/soc/sof/sof-pci-dev.c | 2 + 14 files changed, 434 insertions(+), 22 deletions(-) create mode 100644 sound/soc/intel/boards/ehl_rt5660.c base-commit: dd8e871d -- 2.20.1
-
Mark Brown authored
Merge series "ASoC: remove rtd->cpu/codec_dai{s} v2" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are rebased "remove rtd->cpu/codec_dai" patches. Kuninori Morimoto (4): ASoC: soc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: soc-core: set rtd->num_cpu/codec at soc_new_pcm_runtime() ASoC: soc-core: tidyup soc_new_pcm_runtime() rtd setups ASoC: soc-core: remove cpu_dai/codec_dai/cpu_dais/codec_dais include/sound/soc.h | 26 +++++++++-------- sound/soc/soc-compress.c | 36 +++++++++++------------ sound/soc/soc-core.c | 42 ++++++++++----------------- sound/soc/soc-dapm.c | 4 +-- sound/soc/soc-generic-dmaengine-pcm.c | 6 ++-- sound/soc/soc-pcm.c | 30 +++++++++---------- 6 files changed, 68 insertions(+), 76 deletions(-) -- 2.17.1 -
Johan Jonker authored
In the old txt situation we add/describe only properties that are used by the driver/hardware itself. With yaml it also filters things in a node that are used by other drivers like 'power-domains' for rk3399, so add it to 'rockchip-i2s.yaml'. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200324094149.6904-3-jbx6244@gmail.comSigned-off-by:
-
Charles Keepax authored
Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200409181311.30247-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Srinivas Kandagatla authored
WSA881x works in PDM mode so the wordlength is fixed, which also makes the only field "WordLength" in DPN_BlockCtrl1 register a read-only. Writing to this register will throw up errors with Qualcomm Controller. So use ro_blockctrl1_reg flag to mark this field as read-only so that core will not write to this register. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200414110347.23829-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Bjorn Andersson authored
All error paths in qcom_snd_parse_of() prints more specific error messages, so silence the one in apq8096_platform_probe() and sdm845_snd_platform_probe() to avoid spamming the kernel log. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200406003229.2354631-1-bjorn.andersson@linaro.orgSigned-off-by:
-
Sebastian Fricke authored
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'. Fixes: 3e086edf("ASoC: stm32: add SAI drivers") Signed-off-by:
Sebastian Fricke <sebastian.fricke.linux@gmail.com> Link: https://lore.kernel.org/r/20200413042952.7675-1-sebastian.fricke.linux@gmail.comSigned-off-by:
-
Charles Keepax authored
This helper is adding very little both it and is one caller are very small functions simply combine the two. Signed-off-by:
-
Charles Keepax authored
Move the error message into snd_soc_dapm_new_dai from dapm_connect_dai_pair, since the two copies are almost identical and are the only callers. Signed-off-by:
-
Johan Jonker authored
In the old txt situation we add/describe only properties that are used by the driver/hardware itself. With yaml it also filters things in a node that are used by other drivers like 'power-domains' for rk3399, so add it to 'rockchip-spdif.yaml'. Signed-off-by:
-
Johan Jonker authored
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to 'rockchip-spdif.yaml' Signed-off-by:
-
Johan Jonker authored
Current dts files with 'spdif' nodes are manually verified. In order to automate this process rockchip-spdif.txt has to be converted to yaml. Also rk3188.dtsi, rk3288.dtsi use an extra fallback string, so change this in the documentation. Changed: "rockchip,rk3188-spdif", "rockchip,rk3066-spdif" "rockchip,rk3288-spdif", "rockchip,rk3066-spdif" Signed-off-by:
-
Jason Yan authored
Fix the following gcc warning: sound/soc/intel/common/soc-acpi-intel-cml-match.c:116:45: warning: ‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=] static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = { ^~~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200410081117.21319-2-yanaijie@huawei.comSigned-off-by:
-
Jason Yan authored
Fix the following gcc warning: sound/soc/intel/common/soc-acpi-intel-icl-match.c:90:45: warning: ‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=] static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = { ^~~~~~~~~~~~ Reported-by: -
Jason Yan authored
Fix the following gcc warning: sound/soc/codecs/wm8900.c:449:38: warning: ‘wm8900_dapm_routput2_control’ defined but not used [-Wunused-const-variable=] static const struct snd_kcontrol_new wm8900_dapm_routput2_control = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8900.c:446:38: warning: ‘wm8900_dapm_loutput2_control’ defined but not used [-Wunused-const-variable=] static const struct snd_kcontrol_new wm8900_dapm_loutput2_control = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: -
Jason Yan authored
Fix the following gcc warning: sound/soc/codecs/wm8990.c:1309:35: warning: ‘wm8990_regmap’ defined but not used [-Wunused-const-variable=] static const struct regmap_config wm8990_regmap = { ^~~~~~~~~~~~~ sound/soc/codecs/wm8990.c:490:38: warning: ‘wm8990_dapm_rxvoice_controls’ defined but not used [-Wunused-const-variable=] static const struct snd_kcontrol_new wm8990_dapm_rxvoice_controls[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8990.c:120:35: warning: ‘out_omix_tlv’ defined but not used [-Wunused-const-variable=] static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0); ^ sound/soc/codecs/wm8990.c:112:35: warning: ‘rec_mix_tlv’ defined but not used [-Wunused-const-variable=] static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0); ^ Reported-by: -
Jason Yan authored
Fix the following gcc warning: sound/soc/codecs/wm8991.c:480:38: warning: ‘wm8991_dapm_rxvoice_controls’ defined but not used [-Wunused-const-variable=] static const struct snd_kcontrol_new wm8991_dapm_rxvoice_controls[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by:
-
