- 03 Apr, 2017 1 commit
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
drm-misc for 4.12: Core: - Removed some fb subsampling dimension checks from core (Ville) - Some MST slot cleanup (Dhinakaran) - Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel) - Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts (Daniel) - Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel) - Cleanups around vblank as well as allowing lockless counter reads (Chris W.) - VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas) Drivers: - Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.) - Thunderbolt external GPU awareness added (Lukas) * tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits) apple-gmux: Don't switch external DP port on 2011+ MacBook Pros drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo PCI: Recognize Thunderbolt devices MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo drm: Fix locking gotcha in page_flip ioctl drm: Clarify the role of plane_state argument to drm_simple update(). drm: Clear e after kfree in drm_mode_page_flip_ioctl drm: Convert cmpxchg(bool) back to a two step operation drm/bridge: ti-tfp410: support hpd via gpio drm: use .hword to represent 16-bit numbers Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl" drm: Fixup failure paths in drm_atomic_helper_set_config drm: Peek at the current counter/timestamp for vblank queries drm: Refactor vblank sequence number comparison drm: vblank cannot be enabled if dev->irq_enabled is false drm: Mark up accesses of vblank->enabled outside of its spinlock drm: Make the decision to keep vblank irq enabled earlier drm/atomic-helper: Remove the backoff hack from set_config ...
-
- 02 Apr, 2017 1 commit
-
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
This series enables atomic mode set for vmwgfx. A number of features and larger fixes are also included. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: (22 commits) drm/vmwgfx: Properly check display/scanout surface size drm/vmwgfx: Support topology greater than texture size drm/vmwgfx: Define an overlaid handle_close ioctl. drm/vmwgfx: Re-implement the stream resource as a simple resource. drm/vmwgfx: Introduce a simple resource type drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro" drm/vmwgfx: Fix LDU X blank screen until mode change issue drm/vmwgfx: Skipping fbdev fb pinning for ldu drm/vmwgfx: Explicityly track screen target width and height drm/vmwgfx: Turn on DRIVER_ATOMIC flag drm/vmwgfx: Switch over to internal atomic API for SOU and LDU drm/vmwgfx: Switch over to internal atomic API for STDU drm/vmwgfx: Fixes to vmwgfx_fb drm/vmwgfx: Add and connect atomic state object check/commit drm/vmwgfx: Add and connect connector helper function drm/vmwgfx: Add and connect plane helper functions drm/vmwgfx: Add and connect CRTC helper functions drm/vmwgfx: Connector atomic state drm/vmwgfx: Plane atomic state drm/vmwgfx: CRTC atomic state ...
-
- 31 Mar, 2017 23 commits
-
-
Sinclair Yeh authored
The scanout surface size is the smaller of max texture size and max STDU size. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Sinclair Yeh authored
Most of the display servers today use a single surface to represent the entire desktop even if it's stretched across multiple screens. For vmwgfx with STDU, the maximum surface size is limited to the maximum texture size on the host. On a 2D VM, this limits our ability to support configurations with more than one 4K monitor. To get past this limitation, we will now allow using a large DMA buf as the framebuffer, and take care of blitting contents from this DMA buf to the display buffer. Signed-off-by:
-
Thomas Hellstrom authored
Instead of providing an ioctl for each handle type, provide a single handle_close ioctl, and reuse the UNREF_DMABUF ioctl. Signed-off-by:
-
Thomas Hellstrom authored
Provide and document a reference implementation. Signed-off-by:
-
Thomas Hellstrom authored
The callbacks we need to provide to many resources are very similar, so provide a simple resource type with a number of helpers for these callbacks. Signed-off-by:
-
Øyvind A. Holm authored
This reverts commit 2d8e60e8 ("drm/vmwgfx: Replace numeric parameter like 0444 with macro") The commit belongs to the series of 1285 patches sent to LKML on 2016-08-02, it changes the representation of file permissions from the octal value "0600" to "S_IRUSR | S_IWUSR". The general consensus was that the changes does not increase readability, quite the opposite; 0600 is easier to parse mentally than S_IRUSR | S_IWUSR. It also causes argument inconsistency, due to commit 04319d89 ("drm/vmwgfx: Add an option to change assumed FB bpp") that added another call to module_param_named() where the permissions are written as 0600. Signed-off-by:
Øyvind A. Holm <sunny@sunbase.org> Reviewed-by:
-
Sinclair Yeh authored
vmw_ldu_crtc_helper_commit() is not called if drm_atomic_crtc_needs_modeset() decides nothing related to CRTC timing has changed. So a better place for this code is in vmw_ldu_primary_plane_atomic_update() since we will need to update ld->fb every time the FB is updated. Signed-off-by:
-
Sinclair Yeh authored
Pinning fbdev's FB at the start of VRAM prevents X from pinning its FB. Since for ldu, the fb would be pinned anyway during a mode set, just skip pinning it in fbdev. This is not the best solution, but since ldu is not used much anymore, it seems like a reasonable workaround. Signed-off-by:
-
Sinclair Yeh authored
We can no longer make the assumption that vmw_stdu_update_st() will be called when there's a valid display surface attached. So instead of using display_srf for width and height, make a record of these paremeters when the screen target is first defined. Signed-off-by:
-
Sinclair Yeh authored
Now that the legacy path has been tested, turn on the DRIVER_ATOMIC flag so user mode driver can start going through the Atomic path. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch>
-
Sinclair Yeh authored
Switch over to internal atomic API. This completes the atomic internal atomic switch for all the Display Units. Signed-off-by:
-
Sinclair Yeh authored
Switch over to using internal atomic API for mode set. This removes the legacy set_config API, replacing it with drm_atomic_helper_set_config(). The DRM helper will use various vmwgfx-specific atomic functions to set a mode. DRIVER_ATOMIC capability flag is not yet set, so the user mode will still use the legacy mode set IOCTL. v2: * Avoid a clash between page-flip pinning and setcrtc pinning, modify the page-flip code to use the page-flip helper and the atomic callbacks. To enable this, we will need to add a wrapper around atomic_commit. * Add vmw_kms_set_config() to work around vmwgfx xorg driver bug Signed-off-by:
-
Sinclair Yeh authored
1. When unsetting a mode, num_connector should be set to zero 2. The pixel_format field needs to be initialized as newer DRM internal functions checks this field 3. Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can change current mode Signed-off-by: -
Sinclair Yeh authored
This connects the main state object check and commit function. v2 * Use drm_atomic_helper_commit() rather than a vmwgfx-specific one Signed-off-by:
-
Sinclair Yeh authored
These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2 Use drm_atomic_helper_best_encoder() rather than a vmwgfx-specific one Signed-off-by:
-
Sinclair Yeh authored
Refactor previous FB and cursor plane update code into their atomic counterparts: check, update, prepare, cleanup, and disable. These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2: * Removed unnecessary pinning of cursor surface * Added a few function headers v3: * Set clip region equal to the destination region * Fixed surface pinning policy * Enable SVGA mode in vmw_sou_primary_plane_prepare_fb Signed-off-by:
-
Sinclair Yeh authored
Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config code into sections that check the validity of the new mode, and sections that actually program the hardware state. vmw_du_crtc_atomic_check() takes CRTC-related checking code. In a later patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related checking code. These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2: * The state->num_connector is actually the total number of potential connectors, not just the one associated with the display unit. The proper one to check is ->connector_mask. * Add the check to only allow plane state to be the same as crtc state (Thanks to mlankhorst) * Make sure to turn on SVGA mode before using VRAM. SVGA mode is disabled in master_drop if dbdev is not running. v3: * Moved dot clock override to crtc_atomic_check Signed-off-by:
-
Sinclair Yeh authored
Add connector handling functions. Start tracking is_implicity in the connector state. Eventually, this field should be tracked exclusively in a connector state. Now that plane and connector states have been created, we can also activate the code that use CRTC state. Signed-off-by:
-
Sinclair Yeh authored
Add plane state handling functions. We have to keep track of a few plane states so we cannot use the DRM helper for this. Created vmw_plane_state along with functions to reset, duplicate, and destroty it. v2 * Removed cursor clean up special case Signed-off-by:
-
Sinclair Yeh authored
Create and Add CRTC state. We currently do not track any properties or custom states so we can technically use the DRM helpers. Creating this code just to make potential future additions easier. Most of the new code will be compiled but not enabled until plane/connector state handling code is also in place. This is the first of a series to enable atomic mode set for vmwgfx. The atomic enabling effort was done in collaboration with Thomas Hellstrom and the VMware Graphics Team. Signed-off-by:
-
Sinclair Yeh authored
Universal support is prerequisite for atomic mode set. Explicitly create planes for the cursor and the primary FB. With a functional cursor plane, the DRM will no longer use the legacy cursor_set2 and cursor_move entry points. Signed-off-by:
-
Sinclair Yeh authored
This field is not being used anymore Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
New stuff for 4.12: - Preliminary vega10 support - Support for multi-level page tables - GPU sensor stuff for mesa - job tracing improvements - PRT support for sparse buffers - Additional SR-IOV improvements - ttm improvements - misc bug fixes and code cleanups * 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (315 commits) drm/amdgpu: Fix 32bit x86 compilation warning drm/amdgpu: just disallow reading untouched registers drm/amdgpu: remove duplicate allowed reg CP_CPF_BUSY_STAT drm/amdgpu/soc15: enable psp block for SRIOV drm/amdgpu/soc15: bypass pp block for vf drm/amdgpu/psp: add check sOS sign drm/amd/amdgpu: Correct ring wptr address in debugfs (v2) drm/amdgpu: Fix multi-level page table bugs for large BOs v3 drm/amdgpu: Fix Vega10 VM initialization drm/amdgpu: Make max_pfn 64-bit drm/amdgpu: drop GB_GPU_ID from the golden settings drm/amdgpu: fix vm pte pde flags to 64-bit for sdma (v3) drm/amd/amdgpu: fix Tonga S3 resume hang on rhel6.8 drm/ttm: decrease ttm bo priority number drm/amd/amdgpu: fix performance drop when VRAM pressure drm/amdgpu: Couple small warning fixes drm/amdgpu: Clean up GFX 9 VM fault messages drm/amdgpu: Register UTCL2 as a source of VM faults drm/amdgpu/soc15: drop support for reading some registers drm/amdgpu/soc15: return cached values for some registers (v2) ...
-
- 30 Mar, 2017 6 commits
-
-
Lukas Wunner authored
On MacBook Pros introduced 2011 and onward, external DP ports are combined DP/Thunderbolt ports that are no longer fully switchable between GPUs, they can only be driven by the discrete GPU. More specifically, the Main Link pins (which transport the actual video and audio streams) are soldered to the discrete GPU, whereas the AUX Channel pins are switchable. Because the integrated GPU is missing the Main Link, external displays appear to it as phantoms which fail to link-train. Force the AUX channel to the discrete GPU on these models to avoid any confusion. Document the switching policy implemented by this commit. Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: http://patchwork.freedesktop.org/patch/msgid/4d1fcc92d1960049e2cff997fbd2d74e45e84e49.1489145162.git.lukas@wunner.de
-
Lukas Wunner authored
An external Thunderbolt GPU can neither drive the laptop's panel nor be powered off by the platform, so there's no point in registering it with vga_switcheroo. In fact, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU, resulting in a lockup. Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
An external Thunderbolt GPU can neither drive the laptop's panel nor be powered off by the platform, so there's no point in registering it with vga_switcheroo. In fact, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU, resulting in a lockup. Moreover AMD's Windows driver special-cases Thunderbolt as well. Acked-by:
-
Lukas Wunner authored
An external Thunderbolt GPU can neither drive the laptop's panel nor be powered off by the platform, so there's no point in registering it with vga_switcheroo. In fact, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU, resulting in a lockup. Moreover AMD's Windows driver special-cases Thunderbolt as well. Acked-by:
-
Lukas Wunner authored
Detect on probe whether a PCI device is part of a Thunderbolt controller. Intel uses a Vendor-Specific Extended Capability (VSEC) with ID 0x1234 on such devices. Detect presence of this VSEC and cache it in a newly added is_thunderbolt bit in struct pci_dev. Also, add a helper to check whether a given PCI device is situated on a Thunderbolt daisy chain (i.e., below a PCI device with is_thunderbolt set). The necessity arises from the following: * If an external Thunderbolt GPU is connected to a dual GPU laptop, that GPU is currently registered with vga_switcheroo even though it can neither drive the laptop's panel nor be powered off by the platform. To vga_switcheroo it will appear as if two discrete GPUs are present. As a result, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU which may not be runtime suspended at all at this moment. The solution is to not register external GPUs with vga_switcheroo, which necessitates a way to recognize if they're on a Thunderbolt daisy chain. * Dual GPU MacBook Pros introduced 2011+ can no longer switch external DisplayPort ports between GPUs. (They're no longer just used for DP but have become combined DP/Thunderbolt ports.) The driver to switch the ports, drivers/platform/x86/apple-gmux.c, needs to detect presence of a Thunderbolt controller and, if found, keep external ports permanently switched to the discrete GPU. v2: Make kerneldoc for pci_is_thunderbolt_attached() more precise, drop portion of commit message pertaining to separate series. (Bjorn Helgaas) Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Amir Levy <amir.jer.levy@intel.com> Acked-by:Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Lukas Wunner authored
I've been contributing to vga_switcheroo for the past two years and by now am fairly familiar with it, so danvet suggested that I add myself as reviewer. While at it, add missing file pattern for vga_switcheroo.h + vgaarb.h to the DRM and DRM-MISC sections such that get_maintainer.pl returns dri-devel@ and the drm-misc maintainers. Suggested-and-acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 31 Mar, 2017 1 commit
-
-
Daniel Vetter authored
We want to lock the primary plane, not the cursor (which might be optional). Real bad case of copy-paste fail, unfortunately our CI didn't catch that because i915 does have a cursor plane. Reported-by:
Eric Anholt <eric@anholt.net> Fixes: 29dc0d1d ("drm: Roll out acquire context for the page_flip ioctl") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170330204831.8225-1-daniel.vetter@ffwll.chTested-by:
Harry Wentland <harry.wentland@amd.com>
-
- 30 Mar, 2017 8 commits
-
-
Alex Xie authored
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c:187:2: warning: right shift count >= width of type [enabled by default] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c:173:2: warning: right shift count >= width of type [enabled by default] drivers/gpu/drm/amd/amdgpu/vega10_ih.c:106:3: warning: right shift count >= width of type [enabled by default] v2: Add a space between "&" and "0xff" Reported by: kbuild-all@01.org Signed-off-by:
Alex Xie <AlexBin.Xie@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Eric Anholt authored
Like the atomic update hook it's wrapping, the plane_state is the old one, and the new one is in plane->state. Both msxfb and tinydrm use it correctly, but I mistook it for the new state in pl111 due to its naming. Signed-off-by:
-
Christian König authored
Not sure what the original intention was here, but returning a random piece of kernel memory to userspace because we didn't set the value at all is clearly not a good idea. This patch disallows reading the register and returns a proper error code instead. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Signed-off-by:
-
Christian König authored
Remove duplicate mmCP_CPF_BUSY_STAT from the allowed registers. Signed-off-by:
-
Daniel Vetter authored
With the explicit retry loop static analyzers get confused by the control flow and believe that e could be accessed after kfree. That's not possible, but it's non-obvious, so let's clear it to NULL. We already cleared e = NULL at the top of the function, so this is all in line. Cc: Julia Lawall <julia.lawall@lip6.fr> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Fixes: 29dc0d1d ("drm: Roll out acquire context for the page_flip ioctl") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Chris Wilson authored
ARM v6 (at least) only allows cmpxchg on 32bit variables which doesn't always include the bool type. drivers/built-in.o: In function `vblank_disable_and_save': imx-ocotp.c:(.text+0xb45e8): undefined reference to `__bad_cmpxchg' Makefile:986: recipe for target 'vmlinux' failed Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reported-by:
Leonard Crestez <leonard.crestez@nxp.com> Fixes: 43dc7fe2 ("drm: Mark up accesses of vblank->enabled outside of its spinlock") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170330140832.32377-1-chris@chris-wilson.co.uk
-
Christopher Spinrath authored
On some boards the hpd pin of a hdmi connector is wired up to a gpio pin. Since in the DRM world the tfp410 driver is responsible for handling the connector, add support for hpd gpios in this very driver. Reviewed-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/2e47786ab3d04078ae70d0c4064f7c4d@rwthex-s1-b.rwth-ad.de
-
Javi Merino authored
The size of .word is the size of a word in the given platform, which for intel systems is 16-bits but other architectures use different sizes. However, .hword emits 16-bit numbers regardless of the platform (and despite the name). The quantities specified in EDID are platform independent, so they should work in spite of the default target of the cc you are using, so use .hword where EDID specifies 16-bit numbers. Cc: Carsten Emde <C.Emde@osadl.org> Cc: David Airlie <airlied@linux.ie> Acked-by:
David Airlie <airlied@linux.ie> Signed-off-by:
Javi Merino <javi.merino@kernel.org> Signed-off-by:
-
