During some debugging I needed to look into how /proc/net/ipv6_route
operated and in my digging I found its calling fib6_clean_all() which uses
"write_lock_bh(&table->tb6_lock)" before doing the walk of the table. I
found this on 2.6.32, but reading the code I believe the same basic idea
exists currently. Looking at the rtnetlink code they are only calling
"read_lock_bh(&table->tb6_lock);" via fib6_dump_table(). While I realize
reading from proc isn't the recommended way of fetching the ipv6 route
table; taking a write lock seems unnecessary and would probably cause
network performance issues.

To verify this I loaded up the ipv6 route table and then ran iperf in 3
cases:
  * doing nothing
  * reading ipv6 route table via proc
    (while :; do cat /proc/net/ipv6_route > /dev/null; done)
  * reading ipv6 route table via rtnetlink
    (while :; do ip -6 route show table all > /dev/null; done)

* Load the ipv6 route table up with:
  * for ((i = 0;i < 4000;i++)); do ip route add unreachable 2000::$i; done

* iperf commands:
  * client: iperf -i 1 -V -c <ipv6 addr>
  * server: iperf -V -s

* iperf results - 3 runs each (in Mbits/sec)
  * nothing: client: 927,927,927 server: 927,927,927
  * proc: client: 179,97,96,113 server: 142,112,133
  * iproute: client: 928,927,928 server: 927,927,927

lock_stat shows taking the write lock is causing the slowdown. Using this
info I decided to write a version of fib6_clean_all() which replaces
write_lock_bh(&table->tb6_lock) with read_lock_bh(&table->tb6_lock). With
this new function I see the same results as with my rtnetlink iperf test.
Signed-off-by: Josh Hunt <joshhunt00@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While it's not too late fix the recently added RQLEN diag extension
to report rqlen and wqlen in the same way as TCP does.

I.e. for listening sockets the ack backlog length (which is the input
queue length for socket) in rqlen and the max ack backlog length in
wqlen, and what the CINQ/OUTQ ioctls do for established.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently tcp diag reports rqlen and wqlen values similar to how
the CINQ/COUTQ iotcls do. To make unix diag report these values
in the same way move the respective code into helpers.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ Fix indentation of sock_diag*() calls. -DaveM ]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a routine that dumps memory-related values of a socket.
It's made as an array to make it possible to add more stuff
here later without breaking compatibility.

Since v1: The SK_MEMINFO_ constants are in userspace
visible part of sock_diag.h, the rest is under __KERNEL__.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The headers check complains it should include the linux/types.h
withing, thus add this one.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Properly toss existing components around the ifdef __KERNEL__
and include the header into the header-y target.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The addition of the "s" to indicate pluralization is intentional,
since the struct actually contains two name variants.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

This converts the following:

	struct link		->	struct tipc_link
	struct link_req		->	struct tipc_link_req
	struct link_name	->	struct tipc_link_name
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

This changes both the struct bcbearer and struct bcbearer_pair to
have the "tipc_" prefix.  Runtime behaviour is unchanged.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Give it a meaningful prefix, as suggested by DaveM, so that it
is consistent with things like struct tipc_bearer, and so it isn't
confused with anything else.  This has no impact on the actual
runtime code behaviour.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Initialize domain->handler in iommu_domain_alloc()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix possible dev refcnt leak when bind fail
  netem: dont call vfree() under spinlock and BH disabled
  netfilter: ctnetlink: fix scheduling while atomic if helper is autoloaded
  netfilter: ctnetlink: fix return value of ctnetlink_get_expect()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix raw_spin_unlock_irqrestore() usage
  oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log all dirty inodes in xfs_fs_sync_fs
  xfs: log the inode in ->write_inode calls for kupdate

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix blk_queue_end_tag()
  block: re-use existing 'reading' variable instead of checking direction again
  block, cfq: fix empty queue crash caused by request merge

If a huge page is enqueued under the protection of hugetlb_lock, then the
operation is atomic and safe.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>		[2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2a95ea6c ("procfs: do not overflow get_{idle,iowait}_time
for nohz") did not take into account that one some architectures jiffies
and cputime use different units.

This causes get_idle_time() to return numbers in the wrong units, making
the idle time fields in /proc/stat wrong.

Instead of converting the usec value returned by
get_cpu_{idle,iowait}_time_us to units of jiffies, use the new function
usecs_to_cputime64 to convert it to the correct unit of cputime64_t.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Artem S. Tashkinov" <t.artem@mailcity.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 8aacc9f5 ("mm/mempolicy.c: fix pgoff in mbind vma merge") is the
slightly incorrect fix.

Why? Think following case.

1. map 4 pages of a file at offset 0

   [0123]

2. map 2 pages just after the first mapping of the same file but with
   page offset 2

   [0123][23]

3. mbind() 2 pages from the first mapping at offset 2.
   mbind_range() should treat new vma is,

   [0123][23]
     |23|
     mbind vma

   but it does

   [0123][23]
     |01|
     mbind vma

   Oops. then, it makes wrong vma merge and splitting ([01][0123] or similar).

This patch fixes it.

[testcase]
  test result - before the patch

	case4: 126: test failed. expect '2,4', actual '2,2,2'
       	case5: passed
	case6: passed
	case7: passed
	case8: passed
	case_n: 246: test failed. expect '4,2', actual '1,4'

	------------[ cut here ]------------
	kernel BUG at mm/filemap.c:135!
	invalid opcode: 0000 [#4] SMP DEBUG_PAGEALLOC

	(snip long bug on messages)

  test result - after the patch

	case4: passed
       	case5: passed
	case6: passed
	case7: passed
	case8: passed
	case_n: passed

  source:  mbind_vma_test.c
============================================================
 #include <numaif.h>
 #include <numa.h>
 #include <sys/mman.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <string.h>

static unsigned long pagesize;
void* mmap_addr;
struct bitmask *nmask;
char buf[1024];
FILE *file;
char retbuf[10240] = "";
int mapped_fd;

char *rubysrc = "ruby -e '\
  pid = %d; \
  vstart = 0x%llx; \
  vend = 0x%llx; \
  s = `pmap -q #{pid}`; \
  rary = []; \
  s.each_line {|line|; \
    ary=line.split(\" \"); \
    addr = ary[0].to_i(16); \
    if(vstart <= addr && addr < vend) then \
      rary.push(ary[1].to_i()/4); \
    end; \
  }; \
  print rary.join(\",\"); \
'";

void init(void)
{
	void* addr;
	char buf[128];

	nmask = numa_allocate_nodemask();
	numa_bitmask_setbit(nmask, 0);

	pagesize = getpagesize();

	sprintf(buf, "%s", "mbind_vma_XXXXXX");
	mapped_fd = mkstemp(buf);
	if (mapped_fd == -1)
		perror("mkstemp "), exit(1);
	unlink(buf);

	if (lseek(mapped_fd, pagesize*8, SEEK_SET) < 0)
		perror("lseek "), exit(1);
	if (write(mapped_fd, "\0", 1) < 0)
		perror("write "), exit(1);

	addr = mmap(NULL, pagesize*8, PROT_NONE,
		    MAP_SHARED, mapped_fd, 0);
	if (addr == MAP_FAILED)
		perror("mmap "), exit(1);

	if (mprotect(addr+pagesize, pagesize*6, PROT_READ|PROT_WRITE) < 0)
		perror("mprotect "), exit(1);

	mmap_addr = addr + pagesize;

	/* make page populate */
	memset(mmap_addr, 0, pagesize*6);
}

void fin(void)
{
	void* addr = mmap_addr - pagesize;
	munmap(addr, pagesize*8);

	memset(buf, 0, sizeof(buf));
	memset(retbuf, 0, sizeof(retbuf));
}

void mem_bind(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_BIND, nmask->maskp, nmask->size, 0);
	if (err)
		perror("mbind "), exit(err);
}

void mem_interleave(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_INTERLEAVE, nmask->maskp, nmask->size, 0);
	if (err)
		perror("mbind "), exit(err);
}

void mem_unbind(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_DEFAULT, NULL, 0, 0);
	if (err)
		perror("mbind "), exit(err);
}

void Assert(char *expected, char *value, char *name, int line)
{
	if (strcmp(expected, value) == 0) {
		fprintf(stderr, "%s: passed\n", name);
		return;
	}
	else {
		fprintf(stderr, "%s: %d: test failed. expect '%s', actual '%s'\n",
			name, line,
			expected, value);
//		exit(1);
	}
}

/*
      AAAA
    PPPPPPNNNNNN
    might become
    PPNNNNNNNNNN
    case 4 below
*/
void case4(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 4);
	mem_unbind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("2,4", retbuf, "case4", __LINE__);

	fin();
}

/*
       AAAA
 PPPPPPNNNNNN
 might become
 PPPPPPPPPPNN
 case 5 below
*/
void case5(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case5", __LINE__);

	fin();
}

/*
	    AAAA
	PPPPNNNNXXXX
	might become
	PPPPPPPPPPPP 6
*/
void case6(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_bind(4, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("6", retbuf, "case6", __LINE__);

	fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPXXXX 7
*/
void case7(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_interleave(4, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case7", __LINE__);

	fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPNNNNNNNN 8
*/
void case8(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_interleave(4, 2);
	mem_interleave(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("2,4", retbuf, "case8", __LINE__);

	fin();
}

void case_n(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	/* make redundunt mappings [0][1234][34][7] */
	mmap(mmap_addr + pagesize*4, pagesize*2, PROT_READ|PROT_WRITE,
	     MAP_FIXED|MAP_SHARED, mapped_fd, pagesize*3);

	/* Expect to do nothing. */
	mem_unbind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case_n", __LINE__);

	fin();
}

int main(int argc, char** argv)
{
	case4();
	case5();
	case6();
	case7();
	case8();
	case_n();

	return 0;
}
=============================================================
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Caspar Zhang <caspar@casparzhang.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: <stable@vger.kernel.org>		[3.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The new iso bandwidth calculation code accidentally has broken support
for bulk mode cameras. This has broken the following drivers:
finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x,
stv0680, vicam.

Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam
cams.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In some of the rt6_bind_neighbour() call sites, it hasn't hooked
up the rt->dst.dev pointer yet, so we'd deref a NULL pointer when
obtaining dev->ifindex for the neighbour hash function computation.

Just pass the netdevice explicitly in to fix this problem.
Reported-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael S. Tsirkin also noticed that we could run the refill work
multiple CPUs: if we kick off a refill on one CPU and then on another,
they would both manipulate the queue at the same time (they use
napi_disable to avoid racing against the receive handler itself).

Tejun points out that this is what the WQ_NON_REENTRANT flag is for,
and that there is a convenient system kthread we can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael S. Tsirkin noticed that we could run the refill work after
ndo_close, which can re-enable napi - we don't disable it until
virtnet_remove.  This is clearly wrong, so move the workqueue control
to ndo_open and ndo_stop (aka. virtnet_open and virtnet_close).

One subtle point: virtnet_probe() could simply fail if it couldn't
allocate a receive buffer, but that's less polite in virtnet_open() so
we schedule a refill as we do in the normal receive path if we run out
of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

I missed this while adding ipv6 support to inet_peer.
Signed-off-by: David S. Miller <davem@davemloft.net>

At the moment VFs can only operate in Eth mode.
In addition we don't want the VF to attempt link sensing,
so we block this option as well.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide child qdisc backlog (byte count) information so that "tc -s
qdisc" can report it to user.

qdisc netem 30: root refcnt 18 limit 1000 delay 20.0ms  10.0ms
 Sent 948517 bytes 898 pkt (dropped 0, overlimits 0 requeues 1)
 rate 175056bit 16pps backlog 114b 1p requeues 1
qdisc tbf 40: parent 30: rate 256000bit burst 20Kb/8 mpu 0b lat 0us
 Sent 948517 bytes 898 pkt (dropped 15, overlimits 611 requeues 0)
 backlog 18168b 12p requeues 0
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

warning: (NETFILTER_XT_MATCH_NFACCT) selects NETFILTER_NETLINK_ACCT which has
unmet direct dependencies (NET && INET && NETFILTER && NETFILTER_ADVANCED)

and then

ERROR: "nfnetlink_subsys_unregister" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "nfnetlink_subsys_register" [net/netfilter/nfnetlink_acct.ko] undefined!
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5e081591 "block: warn if tag is greater than real_max_depth"
cleaned up blk_queue_end_tag() to warn when the tag is truly invalid
(greater than real_max_depth).  However, it changed behavior in the tag <
max_depth case to not end the request.  Leading to triggering of
BUG_ON(blk_queued_rq(rq)) in the request completion path:

  http://marc.info/?l=linux-kernel&m=132204370518629&w=2

In order to allow blk_queue_resize_tags() to shrink the tag space
blk_queue_end_tag() must always complete tags with a value less than
real_max_depth regardless of the current max_depth.  The comment about
"handling the shrink case" seems to be what prompted changes in this
space, so remove it and BUG on all invalid tags (made even simpler by
Matthew's suggestion to use an unsigned compare).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Reported-by: Meelis Roos <mroos@ut.ee>
Reported-by: Ed Nadolski <edmund.nadolski@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It just obscures that the netdevice pointer and the expires value are
implemented in the dst_entry sub-object of the ipv6 route.

And it makes grepping for dst_entry member uses much harder too.
Signed-off-by: David S. Miller <davem@davemloft.net>

Also, create and use an rt6_bind_neighbour() in net/ipv6/route.c to
consolidate some common logic.
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to perform a proper universal hash on a vector of integers,
we have to use different universal hashes on each vector element.

Which means we need 4 different hash randoms for ipv6.
Signed-off-by: David S. Miller <davem@davemloft.net>

Check setsockopt arguments to avoid overflows and return -EINVAL for
too large arguments.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>