The trace_hardirqs_on() sets current->hardirqs_enabled and from here
the lockdep assumes interrupts are enabled although they are remain
disabled until the context switches to the guest. Consequent
srcu_read_lock() checks the flags in rcu_lock_acquire(), observes
disabled interrupts and prints a warning (see below).

This moves trace_hardirqs_on/off closer to __kvmppc_vcore_entry to
prevent lockdep from being confused.

DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
WARNING: CPU: 16 PID: 8038 at kernel/locking/lockdep.c:4128 check_flags.part.25+0x224/0x280
[...]
NIP [c000000000185b84] check_flags.part.25+0x224/0x280
LR [c000000000185b80] check_flags.part.25+0x220/0x280
Call Trace:
[c000003fec253710] [c000000000185b80] check_flags.part.25+0x220/0x280 (unreliable)
[c000003fec253780] [c000000000187ea4] lock_acquire+0x94/0x260
[c000003fec253840] [c00800001a1e9768] kvmppc_run_core+0xa60/0x1ab0 [kvm_hv]
[c000003fec253a10] [c00800001a1ed944] kvmppc_vcpu_run_hv+0x73c/0xec0 [kvm_hv]
[c000003fec253ae0] [c00800001a1095dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000003fec253b00] [c00800001a1056bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[c000003fec253b90] [c00800001a0f3618] kvm_vcpu_ioctl+0x460/0x850 [kvm]
[c000003fec253d00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930
[c000003fec253db0] [c00000000041ce04] ksys_ioctl+0xc4/0x110
[c000003fec253e00] [c00000000041ce78] sys_ioctl+0x28/0x80
[c000003fec253e20] [c00000000000b5a4] system_call+0x5c/0x70
Instruction dump:
419e0034 3d220004 39291730 81290000 2f890000 409e0020 3c82ffc6 3c62ffc5
3884be70 386329c0 4bf6ea71 60000000 <0fe00000> 3c62ffc6 3863be90 4801273d
irq event stamp: 1025
hardirqs last  enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last  enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>]           (null)
---[ end trace 31180adcc848993e ]---
possible reason: unannotated irqs-off.
irq event stamp: 1025
hardirqs last  enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last  enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>]           (null)

Fixes: 8b24e69f ("KVM: PPC: Book3S HV: Close race with testing for signals on guest entry", 2017-06-26)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Implement a real mode handler for the H_CALL H_PAGE_INIT which can be
used to zero or copy a guest page. The page is defined to be 4k and must
be 4k aligned.

The in-kernel real mode handler halves the time to handle this H_CALL
compared to handling it in userspace for a hash guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Implement a virtual mode handler for the H_CALL H_PAGE_INIT which can be
used to zero or copy a guest page. The page is defined to be 4k and must
be 4k aligned.

The in-kernel handler halves the time to handle this H_CALL compared to
handling it in userspace for a radix guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Guest physical to user address translation uses KVM memslots and reading
these requires holding the kvm->srcu lock. However recently introduced
kvmppc_tce_validate() broke the rule (see the lockdep warning below).

This moves srcu_read_lock(&vcpu->kvm->srcu) earlier to protect
kvmppc_tce_validate() as well.

=============================
WARNING: suspicious RCU usage
5.1.0-rc2-le_nv2_aikATfstn1-p1 #380 Not tainted
-----------------------------
include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-ppc/8020:
 #0: 0000000094972fe9 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0xdc/0x850 [kvm]

stack backtrace:
CPU: 44 PID: 8020 Comm: qemu-system-ppc Not tainted 5.1.0-rc2-le_nv2_aikATfstn1-p1 #380
Call Trace:
[c000003fece8f740] [c000000000bcc134] dump_stack+0xe8/0x164 (unreliable)
[c000003fece8f790] [c000000000181be0] lockdep_rcu_suspicious+0x130/0x170
[c000003fece8f810] [c0000000000d5f50] kvmppc_tce_to_ua+0x280/0x290
[c000003fece8f870] [c00800001a7e2c78] kvmppc_tce_validate+0x80/0x1b0 [kvm]
[c000003fece8f8e0] [c00800001a7e3fac] kvmppc_h_put_tce+0x94/0x3e4 [kvm]
[c000003fece8f9a0] [c00800001a8baac4] kvmppc_pseries_do_hcall+0x30c/0xce0 [kvm_hv]
[c000003fece8fa10] [c00800001a8bd89c] kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv]
[c000003fece8fae0] [c00800001a7d95dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000003fece8fb00] [c00800001a7d56bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[c000003fece8fb90] [c00800001a7c3618] kvm_vcpu_ioctl+0x460/0x850 [kvm]
[c000003fece8fd00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930
[c000003fece8fdb0] [c00000000041ce04] ksys_ioctl+0xc4/0x110
[c000003fece8fe00] [c00000000041ce78] sys_ioctl+0x28/0x80
[c000003fece8fe20] [c00000000000b5a4] system_call+0x5c/0x70

Fixes: 42de7b9e ("KVM: PPC: Validate TCEs against preregistered memory page sizes", 2018-09-10)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

There is a hardware bug in some POWER9 processors where a treclaim in
fake suspend mode can cause an inconsistency in the XER[SO] bit across
the threads of a core, the workaround being to force the core into SMT4
when doing the treclaim.

The FAKE_SUSPEND bit (bit 10) in the PSSCR is used to control whether a
thread is in fake suspend or real suspend. The important difference here
being that thread reconfiguration is blocked in real suspend but not
fake suspend mode.

When we exit a guest which was in fake suspend mode, we force the core
into SMT4 while we do the treclaim in kvmppc_save_tm_hv().
However on the new exit path introduced with the function
kvmhv_run_single_vcpu() we restore the host PSSCR before calling
kvmppc_save_tm_hv() which means that if we were in fake suspend mode we
put the thread into real suspend mode when we clear the
PSSCR[FAKE_SUSPEND] bit. This means that we block thread reconfiguration
and the thread which is trying to get the core into SMT4 before it can
do the treclaim spins forever since it itself is blocking thread
reconfiguration. The result is that that core is essentially lost.

This results in a trace such as:
[   93.512904] CPU: 7 PID: 13352 Comm: qemu-system-ppc Not tainted 5.0.0 #4
[   93.512905] NIP:  c000000000098a04 LR: c0000000000cc59c CTR: 0000000000000000
[   93.512908] REGS: c000003fffd2bd70 TRAP: 0100   Not tainted  (5.0.0)
[   93.512908] MSR:  9000000302883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[SE]>  CR: 22222444  XER: 00000000
[   93.512914] CFAR: c000000000098a5c IRQMASK: 3
[   93.512915] PACATMSCRATCH: 0000000000000001
[   93.512916] GPR00: 0000000000000001 c000003f6cc1b830 c000000001033100 0000000000000004
[   93.512928] GPR04: 0000000000000004 0000000000000002 0000000000000004 0000000000000007
[   93.512930] GPR08: 0000000000000000 0000000000000004 0000000000000000 0000000000000004
[   93.512932] GPR12: c000203fff7fc000 c000003fffff9500 0000000000000000 0000000000000000
[   93.512935] GPR16: 2000000000300375 000000000000059f 0000000000000000 0000000000000000
[   93.512951] GPR20: 0000000000000000 0000000000080053 004000000256f41f c000003f6aa88ef0
[   93.512953] GPR24: c000003f6aa89100 0000000000000010 0000000000000000 0000000000000000
[   93.512956] GPR28: c000003f9e9a0800 0000000000000000 0000000000000001 c000203fff7fc000
[   93.512959] NIP [c000000000098a04] pnv_power9_force_smt4_catch+0x1b4/0x2c0
[   93.512960] LR [c0000000000cc59c] kvmppc_save_tm_hv+0x40/0x88
[   93.512960] Call Trace:
[   93.512961] [c000003f6cc1b830] [0000000000080053] 0x80053 (unreliable)
[   93.512965] [c000003f6cc1b8a0] [c00800001e9cb030] kvmhv_p9_guest_entry+0x508/0x6b0 [kvm_hv]
[   93.512967] [c000003f6cc1b940] [c00800001e9cba44] kvmhv_run_single_vcpu+0x2dc/0xb90 [kvm_hv]
[   93.512968] [c000003f6cc1ba10] [c00800001e9cc948] kvmppc_vcpu_run_hv+0x650/0xb90 [kvm_hv]
[   93.512969] [c000003f6cc1bae0] [c00800001e8f620c] kvmppc_vcpu_run+0x34/0x48 [kvm]
[   93.512971] [c000003f6cc1bb00] [c00800001e8f2d4c] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[   93.512972] [c000003f6cc1bb90] [c00800001e8e3918] kvm_vcpu_ioctl+0x460/0x7d0 [kvm]
[   93.512974] [c000003f6cc1bd00] [c0000000003ae2c0] do_vfs_ioctl+0xe0/0x8e0
[   93.512975] [c000003f6cc1bdb0] [c0000000003aeb24] ksys_ioctl+0x64/0xe0
[   93.512978] [c000003f6cc1be00] [c0000000003aebc8] sys_ioctl+0x28/0x80
[   93.512981] [c000003f6cc1be20] [c00000000000b3a4] system_call+0x5c/0x70
[   93.512983] Instruction dump:
[   93.512986] 419dffbc e98c0000 2e8b0000 38000001 60000000 60000000 60000000 40950068
[   93.512993] 392bffff 39400000 79290020 39290001 <7d2903a6> 60000000 60000000 7d235214

To fix this we preserve the PSSCR[FAKE_SUSPEND] bit until we call
kvmppc_save_tm_hv() which will mean the core can get into SMT4 and
perform the treclaim. Note kvmppc_save_tm_hv() clears the
PSSCR[FAKE_SUSPEND] bit again so there is no need to explicitly do that.

Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Merge tag 'kvmarm-fixes-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for 5.1

- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups

The documentation does not mention how to delete a slot, add the
information.
Reported-by: Nathaniel McCallum <npmccallum@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The series to add memcg accounting to KVM allocations[1] states:

  There are many KVM kernel memory allocations which are tied to the
  life of the VM process and should be charged to the VM process's
  cgroup.

While it is correct to account KVM kernel allocations to the cgroup of
the process that created the VM, it's technically incorrect to state
that the KVM kernel memory allocations are tied to the life of the VM
process.  This is because the VM itself, i.e. struct kvm, is not tied to
the life of the process which created it, rather it is tied to the life
of its associated file descriptor.  In other words, kvm_destroy_vm() is
not invoked until fput() decrements its associated file's refcount to
zero.  A simple example is to fork() in Qemu and have the child sleep
indefinitely; kvm_destroy_vm() isn't called until Qemu closes its file
descriptor *and* the rogue child is killed.

The allocations are guaranteed to be *accounted* to the process which
created the VM, but only because KVM's per-{VM,vCPU} ioctls reject the
ioctl() with -EIO if kvm->mm != current->mm.  I.e. the child can keep
the VM "alive" but can't do anything useful with its reference.

Note that because 'struct kvm' also holds a reference to the mm_struct
of its owner, the above behavior also applies to userspace allocations.

Given that mucking with a VM's file descriptor can lead to subtle and
undesirable behavior, e.g. memcg charges persisting after a VM is shut
down, explicitly document a VM's lifecycle and its impact on the VM's
resources.

Alternatively, KVM could aggressively free resources when the creating
process exits, e.g. via mmu_notifier->release().  However, mmu_notifier
isn't guaranteed to be available, and freeing resources when the creator
exits is likely to be error prone and fragile as KVM would need to
ensure that it only freed resources that are truly out of reach. In
practice, the existing behavior shouldn't be problematic as a properly
configured system will prevent a child process from being moved out of
the appropriate cgroup hierarchy, i.e. prevent hiding the process from
the OOM killer, and will prevent an unprivileged user from being able to
to hold a reference to struct kvm via another method, e.g. debugfs.

[1]https://patchwork.kernel.org/patch/10806707/Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Documentation/virtual/kvm/api.txt states:

  NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and
        KVM_EXIT_EPR the corresponding operations are complete (and guest
        state is consistent) only after userspace has re-entered the
        kernel with KVM_RUN.  The kernel side will first finish incomplete
        operations and then check for pending signals.  Userspace can
        re-enter the guest with an unmasked signal pending to complete
        pending operations.

Because guest state may be inconsistent, starting state migration after
an IO exit without first completing IO may result in test failures, e.g.
a proposed change to KVM's handling of %rip in its fast PIO handling[1]
will cause the new VM, i.e. the post-migration VM, to have its %rip set
to the IN instruction that triggered KVM_EXIT_IO, leading to a test
assertion due to a stage mismatch.

For simplicitly, require KVM_CAP_IMMEDIATE_EXIT to complete IO and skip
the test if it's not available.  The addition of KVM_CAP_IMMEDIATE_EXIT
predates the state selftest by more than a year.

[1] https://patchwork.kernel.org/patch/10848545/

Fixes: fa3899ad ("kvm: selftests: add basic test for state save and restore")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since 4.8.3, gcc has enabled -fstack-protector by default.  This is
problematic for the KVM selftests as they do not configure fs or gs
segments (the stack canary is pulled from fs:0x28).  With the default
behavior, gcc will insert a stack canary on any function that creates
buffers of 8 bytes or more.  As a result, ucall() will hit a triple
fault shutdown due to reading a bad fs segment when inserting its
stack canary, i.e. every test fails with an unexpected SHUTDOWN.

Fixes: 14c47b75 ("kvm: selftests: introduce ucall")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM selftests embed the guest "image" as a function in the test itself
and extract the guest code at runtime by manually parsing the elf
headers.  The parsing is very simple and doesn't supporting fancy things
like position independent executables.  Recent versions of gcc enable
pie by default, which results in triple fault shutdowns in the guest due
to the virtual address in the headers not matching up with the virtual
address retrieved from the function pointer.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...so that the test doesn't end up in an infinite loop if it fails for
whatever reason, e.g. SHUTDOWN due to gcc inserting stack canary code
into ucall() and attempting to derefence a null segment.

Fixes: ca359066 ("kvm: selftests: add cr4_cpuid_sync_test")
Cc: Wei Huang <wei@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Most (all?) x86 platforms provide a port IO based reset mechanism, e.g.
OUT 92h or CF9h.  Userspace may emulate said mechanism, i.e. reset a
vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM
that it is doing a reset, e.g. Qemu jams vCPU state and resumes running.

To avoid corruping %rip after such a reset, commit 0967b7bf ("KVM:
Skip pio instruction when it is emulated, not executed") changed the
behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the
instruction prior to exiting to userspace.  Full emulation doesn't need
such tricks becase re-emulating the instruction will naturally handle
%rip being changed to point at the reset vector.

Updating %rip prior to executing to userspace has several drawbacks:

  - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation
    fails it will likely yell about the wrong address.
  - Single step exits to userspace for are effectively dropped as
    KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO.
  - Behavior of PIO emulation is different depending on whether it
    goes down the fast path or the slow path.

Rather than skip the PIO instruction before exiting to userspace,
snapshot the linear %rip and cancel PIO completion if the current
value does not match the snapshot.  For a 64-bit vCPU, i.e. the most
common scenario, the snapshot and comparison has negligible overhead
as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra
VMREAD in this case.

All other alternatives to snapshotting the linear %rip that don't
rely on an explicit reset announcenment suffer from one corner case
or another.  For example, canceling PIO completion on any write to
%rip fails if userspace does a save/restore of %rip, and attempting to
avoid that issue by canceling PIO only if %rip changed then fails if PIO
collides with the reset %rip.  Attempting to zero in on the exact reset
vector won't work for APs, which means adding more hooks such as the
vCPU's MP_STATE, and so on and so forth.

Checking for a linear %rip match technically suffers from corner cases,
e.g. userspace could theoretically rewrite the underlying code page and
expect a different instruction to execute, or the guest hardcodes a PIO
reset at 0xfffffff0, but those are far, far outside of what can be
considered normal operation.

Fixes: 432baf60 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O")
Cc: <stable@vger.kernel.org>
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When userspace initializes guest vCPUs it may want to zero all supported
MSRs including Hyper-V related ones including HV_X64_MSR_STIMERn_CONFIG/
HV_X64_MSR_STIMERn_COUNT. With commit f3b138c5 ("kvm/x86: Update SynIC
timers on guest entry only") we began doing stimer_mark_pending()
unconditionally on every config change.

The issue I'm observing manifests itself as following:
- Qemu writes 0 to STIMERn_{CONFIG,COUNT} MSRs and marks all stimers as
  pending in stimer_pending_bitmap, arms KVM_REQ_HV_STIMER;
- kvm_hv_has_stimer_pending() starts returning true;
- kvm_vcpu_has_events() starts returning true;
- kvm_arch_vcpu_runnable() starts returning true;
- when kvm_arch_vcpu_ioctl_run() gets into
  (vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED) case:
  - kvm_vcpu_block() gets in 'kvm_vcpu_check_block(vcpu) < 0' and returns
    immediately, avoiding normal wait path;
  - -EAGAIN is returned from kvm_arch_vcpu_ioctl_run() immediately forcing
    userspace to retry.

So instead of normal wait path we get a busy loop on all secondary vCPUs
before they get INIT signal. This seems to be undesirable, especially given
that this happens even when Hyper-V extensions are not used.

Generally, it seems to be pointless to mark an stimer as pending in
stimer_pending_bitmap and arm KVM_REQ_HV_STIMER as the only thing
kvm_hv_process_stimers() will do is clear the corresponding bit. We may
just not mark disabled timers as pending instead.

Fixes: f3b138c5 ("kvm/x86: Update SynIC timers on guest entry only")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since MSR_IA32_ARCH_CAPABILITIES is emualted unconditionally even if
host doesn't suppot it. We should move it to array emulated_msrs from
arry msrs_to_save, to report to userspace that guest support this msr.
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host
userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES
regardless of hardware support under the pretense that KVM fully
emulates MSR_IA32_ARCH_CAPABILITIES.  Unfortunately, only VMX hosts
handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS
also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts).

Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so
that it's emulated on AMD hosts.

Fixes: 1eaafe91 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported")
Cc: stable@vger.kernel.org
Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The function irqfd_wakeup() has flags defined as __poll_t and then it
has additional flags which is used for irqflags.

Redefine the inner flags variable as iflags so it does not shadow the
outer flags.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Replace kvm_flush_remote_tlbs with kvm_flush_remote_tlbs_with_address
in slot_handle_level_range. When range based flushes are not enabled
kvm_flush_remote_tlbs_with_address falls back to kvm_flush_remote_tlbs.

This changes the behavior of many functions that indirectly use
slot_handle_level_range, iff the range based flushes are enabled. The
only potential problem I see with this is that kvm->tlbs_dirty will be
cleared less often, however the only caller of slot_handle_level_range that
checks tlbs_dirty is kvm_mmu_notifier_invalidate_range_start which
checks it and does a kvm_flush_remote_tlbs after calling
kvm_unmap_hva_range anyway.

Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and
	without this patch. The patch introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

I do not see any consistency about headers_install of <linux/kvm_para.h>
and <asm/kvm_para.h>.

According to my analysis of Linux 5.1-rc1, there are 3 groups:

 [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported

    alpha, arm, hexagon, mips, powerpc, s390, sparc, x86

 [2] <asm/kvm_para.h> is exported, but <linux/kvm_para.h> is not

    arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc,
    parisc, sh, unicore32, xtensa

 [3] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported

    csky, nds32, riscv

This does not match to the actual KVM support. At least, [2] is
half-baked.

Nor do arch maintainers look like they care about this. For example,
commit 0add5371 ("microblaze: Add missing kvm_para.h to Kbuild")
exported <asm/kvm_para.h> to user-space in order to fix an in-kernel
build error.

We have two ways to make this consistent:

 [A] export both <linux/kvm_para.h> and <asm/kvm_para.h> for all
     architectures, irrespective of the KVM support

 [B] Match the header export of <linux/kvm_para.h> and <asm/kvm_para.h>
     to the KVM support

My first attempt was [A] because the code looks cleaner, but Paolo
suggested [B].

So, this commit goes with [B].

For most architectures, <asm/kvm_para.h> was moved to the kernel-space.
I changed include/uapi/linux/Kbuild so that it checks generated
asm/kvm_para.h as well as check-in ones.

After this commit, there will be two groups:

 [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported

    arm, arm64, mips, powerpc, s390, x86

 [2] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported

    alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze,
    nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

* nr_mmu_pages would be non-zero only if kvm->arch.n_requested_mmu_pages is
  non-zero.

* nr_mmu_pages is always non-zero, since kvm_mmu_calculate_mmu_pages()
  never return zero.

Based on these two reasons, we can merge the two *if* clause and use the
return value from kvm_mmu_calculate_mmu_pages() directly. This simplify
the code and also eliminate the possibility for reader to believe
nr_mmu_pages would be zero.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

According to section "Checks on VMX Controls" in Intel SDM vol 3C, the
following check is performed on vmentry of L2 guests:

    On processors that support Intel 64 architecture, the IA32_SYSENTER_ESP
    field and the IA32_SYSENTER_EIP field must each contain a canonical
    address.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Errata#1096:

On a nested data page fault when CR.SMAP=1 and the guest data read
generates a SMAP violation, GuestInstrBytes field of the VMCB on a
VMEXIT will incorrectly return 0h instead the correct guest
instruction bytes .

Recommend Workaround:

To determine what instruction the guest was executing the hypervisor
will have to decode the instruction at the instruction pointer.

The recommended workaround can not be implemented for the SEV
guest because guest memory is encrypted with the guest specific key,
and instruction decoder will not be able to decode the instruction
bytes. If we hit this errata in the SEV guest then log the message
and request a guest shutdown.
Reported-by: Venkatesh Srinivas <venkateshs@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM's API requires thats ioctls must be issued from the same process
that created the VM.  In other words, userspace can play games with a
VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the
creator can do anything useful.  Explicitly reject device ioctls that
are issued by a process other than the VM's creator, and update KVM's
API documentation to extend its requirements to device ioctls.

Fixes: 852b6d57 ("kvm: add device control API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Per Paolo[1], instantiating multiple VMs in a single process is legal;
but this conflicts with KVM's API documentation, which states:

  The only supported use is one virtual machine per process, and one
  vcpu per thread.

However, an earlier section in the documentation states:

   Only run VM ioctls from the same process (address space) that was used
   to create the VM.

and:

   Only run vcpu ioctls from the same thread that was used to create the
   vcpu.

This suggests that the conflicting documentation is simply an incorrect
ordering of of words, i.e. what's really meant is that a virtual machine
can't be shared across multiple processes and a vCPU can't be shared
across multiple threads.

Tweak the blurb on issuing ioctls to use a more assertive tone, and
rewrite the "supported use" sentence to reference said blurb instead of
poorly restating it in different terms.

Opportunistically add missing punctuation.

[1] https://lkml.kernel.org/r/f23265d4-528e-3bd4-011f-4d7b8f3281db@redhat.com

Fixes: 9c1b96e3 ("KVM: Document basic API")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Improve notes on asynchronous ioctl]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The cr4_pae flag is a bit of a misnomer, its purpose is really to track
whether the guest PTE that is being shadowed is a 4-byte entry or an
8-byte entry.  Prior to supporting nested EPT, the size of the gpte was
reflected purely by CR4.PAE.  KVM fudged things a bit for direct sptes,
but it was mostly harmless since the size of the gpte never mattered.
Now that a spte may be tracking an indirect EPT entry, relying on
CR4.PAE is wrong and ill-named.

For direct shadow pages, force the gpte_size to '1' as they are always
8-byte entries; EPT entries can only be 8-bytes and KVM always uses
8-byte entries for NPT and its identity map (when running with EPT but
not unrestricted guest).

Likewise, nested EPT entries are always 8-bytes.  Nested EPT presents a
unique scenario as the size of the entries are not dictated by CR4.PAE,
but neither is the shadow page a direct map.  To handle this scenario,
set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination,
to denote a nested EPT shadow page.  Use the information to avoid
incorrectly zapping an unsync'd indirect page in __kvm_sync_page().

Providing a consistent and accurate gpte_size fixes a bug reported by
Vitaly where fast_cr3_switch() always fails when switching from L2 to
L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages,
whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE.

Fixes: 7dcd5755 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Explicitly zero out quadrant and invalid instead of inheriting them from
the root_mmu.  Functionally, this patch is a nop as we (should) never
set quadrant for a direct mapped (EPT) root_mmu and nested EPT is only
allowed if EPT is used for L1, and the root_mmu will never be invalid at
this point.

Explicitly setting flags sets the stage for repurposing the legacy
paging bits in role, e.g. nxe, cr0_wp, and sm{a,e}p_andnot_wp, at which
point 'smm' would be the only flag to be inherited from root_mmu.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Some comments in virt/kvm/arm/mmu.c are outdated. Update them to
reflect the current state of the code.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Pull scheduler updates from Thomas Gleixner:
 "Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Pull perf updates from Thomas Gleixner:
 "A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session