- 01 May, 2017 40 commits
-
-
Yonghong Song authored
llvm 4.0 and above generates the code like below: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... and the verifier complains "R2 invalid mem access 'inv'" for insn #521. This is because verifier marks register r2 as unknown value after #519 where r2 is a stack pointer and r1 holds a constant value. Teach verifier to recognize "stack_ptr + imm" and "stack_ptr + reg with const val" as valid stack_ptr with new offset. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karim Eshapa authored
Use time_before_eq for time comparison more safe and dealing with timer wrapping to be future-proof. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin LaHaise authored
Since several of the the netlink attributes used to configure the flower classifier's MPLS TC, BOS and Label fields have additional bits which are unused, check those bits to ensure that they are actually 0 as suggested by Jamal. Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Cc: David Miller <davem@davemloft.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for your net-next tree. A large bunch of code cleanups, simplify the conntrack extension codebase, get rid of the fake conntrack object, speed up netns by selective synchronize_net() calls. More specifically, they are: 1) Check for ct->status bit instead of using nfct_nat() from IPVS and Netfilter codebase, patch from Florian Westphal. 2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao. 3) Simplify FTP IPVS helper module registration path, from Arushi Singhal. 4) Introduce nft_is_base_chain() helper function. 5) Enforce expectation limit from userspace conntrack helper, from Gao Feng. 6) Add nf_ct_remove_expect() helper function, from Gao Feng. 7) NAT mangle helper function return boolean, from Gao Feng. 8) ctnetlink_alloc_expect() should only work for conntrack with helpers, from Gao Feng. 9) Add nfnl_msg_type() helper function to nfnetlink to build the netlink message type. 10) Get rid of unnecessary cast on void, from simran singhal. 11) Use seq_puts()/seq_putc() instead of seq_printf() where possible, also from simran singhal. 12) Use list_prev_entry() from nf_tables, from simran signhal. 13) Remove unnecessary & on pointer function in the Netfilter and IPVS code. 14) Remove obsolete comment on set of rules per CPU in ip6_tables, no longer true. From Arushi Singhal. 15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng. 16) Remove unnecessary nested rcu_read_lock() in __nf_nat_decode_session(). Code running from hooks are already guaranteed to run under RCU read side. 17) Remove deadcode in nf_tables_getobj(), from Aaron Conole. 18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(), also from Aaron. 19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole. 20) Don't propagate NF_DROP error to userspace via ctnetlink in __nf_nat_alloc_null_binding() function, from Gao Feng. 21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks, from Gao Feng. 22) Kill the fake untracked conntrack objects, use ctinfo instead to annotate a conntrack object is untracked, from Florian Westphal. 23) Remove nf_ct_is_untracked(), now obsolete since we have no conntrack template anymore, from Florian. 24) Add event mask support to nft_ct, also from Florian. 25) Move nf_conn_help structure to include/net/netfilter/nf_conntrack_helper.h. 26) Add a fixed 32 bytes scratchpad area for conntrack helpers. Thus, we don't deal with variable conntrack extensions anymore. Make sure userspace conntrack helper doesn't go over that size. Remove variable size ct extension infrastructure now this code got no more clients. From Florian Westphal. 27) Restore offset and length of nf_ct_ext structure to 8 bytes now that wraparound is not possible any longer, also from Florian. 28) Allow to get rid of unassured flows under stress in conntrack, this applies to DCCP, SCTP and TCP protocols, from Florian. 29) Shrink size of nf_conntrack_ecache structure, from Florian. 30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker, from Gao Feng. 31) Register SYNPROXY hooks on demand, from Florian Westphal. 32) Use pernet hook whenever possible, instead of global hook registration, from Florian Westphal. 33) Pass hook structure to ebt_register_table() to consolidate some infrastructure code, from Florian Westphal. 34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the SYNPROXY code, to make sure device stats are not fooled, patch from Gao Feng. 35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we don't need anymore if we just select a fixed size instead of expensive runtime time calculation of this. From Florian. 36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(), from Florian. 37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from Florian. 38) Attach NAT extension on-demand from masquerade and pptp helper path, from Florian. 39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole. 40) Speed up netns by selective calls of synchronize_net(), from Florian Westphal. 41) Silence stack size warning gcc in 32-bit arch in snmp helper, from Florian. 42) Inconditionally call nf_ct_ext_destroy(), even if we have no extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== samples/bpf: two bug fixes to XDP_FLAGS_SKB_MODE attaching Two small bugfixes for: commit 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The xdp_tx_iptunnel program can be terminated in two ways, after N-seconds or via Ctrl-C SIGINT. The SIGINT code path does not handle detatching the correct XDP program, in-case the program was attached with XDP_FLAGS_SKB_MODE. Fix this by storing the XDP flags as a global variable, which is available for the SIGINT handler function. Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under samples/bpf/ should use the correct type. Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== xdp: use netlink extended ACK reporting This series is an attempt to make XDP more user friendly by enabling exploiting the recently added netlink extended ACK reporting to carry messages to user space. David Ahern's iproute2 ext ack patches for ip link are sufficient to show the errors like this: Error: nfp: MTU too large w/ XDP enabled Where the message is coming directly from the driver. There could still be a bit of a leap for a complete novice from the message above to the right settings, but it's a big improvement over the standard "Invalid argument" message. v1/non-rfc: - add a separate macro in patch 1; - add KBUILD_MODNAME as part of the message (Daniel); - don't print the error to logs in patch 1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Try to carry error messages to the user via the netlink extended ack message attribute. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Try to carry error messages to the user via the netlink extended ack message attribute. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Drivers usually have a number of restrictions for running XDP - most common being buffer sizes, LRO and number of rings. Even though some drivers try to be helpful and print error messages experience shows that users don't often consult kernel logs on netlink errors. Try to use the new extended ack mechanism to carry the message back to user space. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
As we propagate extended ack reporting throughout various paths in the kernel it may be that the same function is called with the extended ack parameter passed as NULL. One place where that happens is in drivers which have a centralized reconfiguration function called both from ndos and from ethtool_ops. Add a new helper for setting the error message in such conditions. Existing helper is left as is to encourage propagating the ext act fully wherever possible. It also makes it clear in the code which messages may be lost due to ext ack being NULL. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Liping Zhang authored
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table, then remove it from the nat_bysource_table via nat_extend->destroy. But now, the nat extension is attached on demand, so if the nat extension is not attached, we will not be notified when the ct is destroyed, i.e. we may fail to remove ct from the nat_bysource_table. So just keep it simple, even if the extension is not attached, we will still invoke the related ext->destroy. And this will also preserve the flexibility for the future extension. Fixes: 9a08ecfe ("netfilter: don't attach a nat extension by default") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-nextPablo Neira Ayuso authored
Simon Horman says: ==================== Third Round of IPVS Updates for v4.12 please consider these enhancements to IPVS for v4.12. If it is too late for v4.12 then please consider them for v4.13. * Remove unused function * Correct comparison of unsigned value ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
net/ipv4/netfilter/nf_nat_snmp_basic.c:1158:1: warning: the frame size of 1160 bytes is larger than 1024 bytes Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
nf_unregister_net_hook(s) can avoid a second call to synchronize_net, provided there is no nfqueue active in that net namespace (which is the common case). This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally this gets called during netns cleanup so no packets should be queued. For the rare case of base chain being unregistered or module removal while nfqueue is in use the extra hiccup due to the packet drops isn't a big deal. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
nf_log_unregister() (which is what gets called in the logger backends module exit paths) does a (required, module is removed) synchronize_rcu(). But nf_log_unset() is only called from pernet exit handlers. It doesn't free any memory so there appears to be no need to call synchronize_rcu. v2: Liping Zhang points out that nf_log_unregister() needs to be called after pernet unregister, else rmmod would become unsafe. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
synchronize_net is expensive and slows down netns cleanup a lot. We have two APIs to unregister a hook: nf_unregister_net_hook (which calls synchronize_net()) and nf_unregister_net_hooks (calls nf_unregister_net_hook in a loop) Make nf_unregister_net_hook a wapper around new helper __nf_unregister_net_hook, which unlinks the hook but does not free it. Then, we can call that helper in nf_unregister_net_hooks and then call synchronize_net() only once. Andrey Konovalov reports this change improves syzkaller fuzzing speed at least twice. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Abhishek Shah authored
This patch allows users to enable/disable internal TX and/or RX clock delay for BCM5481x series PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistakes in printk message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Scott Wood authored
The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761daf) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Commit 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") added the ability to "take over an entry which was previously learned via HW when it shows up from a SW port". However, if an entry was learned via HW and then a control packet (e.g., ARP request) was trapped to the CPU, the bridge driver will update the entry and remove the externally learned flag, although the entry is still present in HW. Instead, only clear the externally learned flag in case of roaming. Fixes: 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
After commit 1215e51e ("ipv4: fix a deadlock in ip_ra_control") we always take RTNL lock for ip_ra_control() which is the only place we update the list ip_ra_chain, so the ip_ra_lock is no longer needed. As Eric points out, BH does not need to disable either, RCU readers don't care. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The struct bpf_map_def was extended in commit fb30d4b7 ("bpf: Add tests for map-in-map") with member unsigned int inner_map_idx. This changed the size of the maps section in the generated ELF _kern.o files. Unfortunately the loader in bpf_load.c does not detect or handle this. Thus, older _kern.o files became incompatible, and caused hard-to-debug errors where the syscall validation rejected BPF_MAP_CREATE request. This patch only detect the situation and aborts load_bpf_file(). It also add code comments warning people that read this loader for inspiration for these pitfalls. Fixes: fb30d4b7 ("bpf: Add tests for map-in-map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We recently added a check to see if nla_nest_start() fails. There are two issues with that. First, if it fails then I don't think we should call nla_nest_cancel(). Second, it's slightly convoluted but the current code returns success but we should return -EMSGSIZE instead. Fixes: a50fe0ff ("lwtunnel: check return value of nla_nest_start") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
Presumably we never hit this return, but static checkers complain that we need to unlock so we may as well fix that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
My static checker complains that we're holding a mutex on this error path. Let's goto exit instead of returning directly. Fixes: b0bccb69 ("qed: Change locking scheme for VF channel") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
lipeng says: ==================== net: hns: bug fix for HNS driver This patchset add support defered dsaf probe when mdio and mbigen module is not insmod. For more details, please refer to individual patch. change log: V4 - > V5: 1. Float on net-next; 2. Delete patch "net: hns: fixed bug that skb used after kfree" from this patchset; V3 -> V4: 1. Delete redundant commit message; 2. Add Reviewed-by: Matthias Brugger <mbrugger@suse.com>; V2 -> V3: 1. Check return value when platform_get_irq in hns_rcb_get_cfg; V1 -> V2: 1. Return appropriate errno in hns_mac_register_phy; ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
lipeng authored
In the hip06 and hip07 SoCs, phy connect to mdio bus.The mdio module is probed with module_init, and, as such, is not guaranteed to probe before the HNS driver. So we need to support deferred probe. We check for probe deferral in the mac init, so we not init DSAF when there is no mdio, and free all resource, to later learn that we need to defer the probe. Signed-off-by: lipeng <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
lipeng authored
In the hip06 and hip07 SoCs, the interrupt lines from the DSAF controllers are connected to mbigen hw module. The mbigen module is probed with module_init, and, as such, is not guaranteed to probe before the HNS driver. So we need to support deferred probe. Signed-off-by: lipeng <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: optimize XDP TX and small fixes This series optimizes the nfp XDP TX performance a little bit. I run quick tests on an Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz. Single core/queue performance for both touch and drop and touch and forward is above 20Mpps @64B packets, drop being 2Mpps faster. I think this is max for a single queue on the low power NFPs. There are also a few minor fixes included for code in net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
For legacy reasons NFP FW may be compiled to DMA packets to a constant offset into the buffer and use the space before it for metadata. This ensures that packets data always start at a certain offset regardless of the amount of preceding metadata. If rx offset is set to 0 there may still be up to 64 bytes of metadata but metadata will start at the beginning of the buffer, instead of: data_start_offset = rx_offset - meta_len Even though we make the buffers larger to accommodate up to 64 bytes of metadata, if there is only N bytes of metadata, we will end up with N bytes of headroom and 64 - N bytes of tailroom. Therefore we can't rely on that space for XDP headroom. Make sure we always allocate full 256 bytes. This, unfortunately, means we can't fit the headroom on an u8 any more. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Right now the required Service Process ABI version is still tied to max ID of known commands. For new NSP commands we are adding we are checking if NSP version is recent enough on command-by-command basis. The driver doesn't have to force the device to have the very latest flash, anything newer than 0.8 should do. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Reading TX queue indexes from the device memory on each interrupt is expensive. It's doubly expensive with XDP running since we have two TX rings to check there. If the software indexes indicate that the TX queue is completely empty, however, we don't need to look at the device completion index at all. The queuing CPU is doing a wmb() before kicking the device TX so we should be safe to assume on the CPU handling the completions will never see old value of the software copy of the index. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
On the RX path we follow the "drop if allocation of replacement buffer fails" rule. With XDP we extended that to the TX action, so if XDP prog returned TX but allocation of replacement RX buffer failed, we will drop the packet. To improve our XDP TX performance extend the idea of rings being always full to XDP TX rings. Pre-fill the XDP TX rings with RX buffers, and when XDP prog returns TX action swap the RX buffer with the next buffer from the TX ring. XDP TX complete will no longer free the buffers but let them sit on the TX ring and wait for swap with RX buffer, instead. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We will soon allocate RX buffers for caching on XDP TX rings. The rx_ring parameter passed to nfp_net_rx_alloc_one() is not actually used, remove it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
As Or points out in commit 423b3aec ("net/mlx4: Change ENOTSUPP to EOPNOTSUPP"), ENOTSUPP is NFS specific error. Replace it with EOPNOTSUPP. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Avoid hashing the tx napi struct into napi_hash[], which is used for busy polling receive queues. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Initialise init_net.count to 1 for its pointer from init_nsproxy lest someone tries to do a get_net() and a put_net() in a process in which current->ns_proxy->net_ns points to the initial network namespace. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Girish Moodalbail authored
Creating a geneve link with 'udpcsum' set results in a creation of link for which UDP checksum will NOT be computed on outbound packets, as can be seen below. 11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0 geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum Similarly, creating a link with 'noudpcsum' set results in a creation of link for which UDP checksum will be computed on outbound packets. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-