- 31 Jan, 2019 40 commits
-
-
Daniel Borkmann authored
[ commit c08435ec upstream ] Move prev_insn_idx and insn_idx from the do_check() function into the verifier environment, so they can be read inside the various helper functions for handling the instructions. It's easier to put this into the environment rather than changing all call-sites only to pass it along. insn_idx is useful in particular since this later on allows to hold state in env->insn_aux_data[env->insn_idx]. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexei Starovoitov authored
[ commit ceefbc96 upstream ] malicious bpf program may try to force the verifier to remember a lot of distinct verifier states. Put a limit to number of per-insn 'struct bpf_verifier_state'. Note that hitting the limit doesn't reject the program. It potentially makes the verifier do more steps to analyze the program. It means that malicious programs will hit BPF_COMPLEXITY_LIMIT_INSNS sooner instead of spending cpu time walking long link list. The limit of BPF_COMPLEXITY_LIMIT_STATES==64 affects cilium progs with slight increase in number of "steps" it takes to successfully verify the programs: before after bpf_lb-DLB_L3.o 1940 1940 bpf_lb-DLB_L4.o 3089 3089 bpf_lb-DUNKNOWN.o 1065 1065 bpf_lxc-DDROP_ALL.o 28052 | 28162 bpf_lxc-DUNKNOWN.o 35487 | 35541 bpf_netdev.o 10864 10864 bpf_overlay.o 6643 6643 bpf_lcx_jit.o 38437 38437 But it also makes malicious program to be rejected in 0.4 seconds vs 6.5 Hence apply this limit to unprivileged programs only. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Alexei Starovoitov authored
[ commit 4f7b3e82 upstream ] pathological bpf programs may try to force verifier to explode in the number of branch states: 20: (d5) if r1 s<= 0x24000028 goto pc+0 21: (b5) if r0 <= 0xe1fa20 goto pc+2 22: (d5) if r1 s<= 0x7e goto pc+0 23: (b5) if r0 <= 0xe880e000 goto pc+0 24: (c5) if r0 s< 0x2100ecf4 goto pc+0 25: (d5) if r1 s<= 0xe880e000 goto pc+1 26: (c5) if r0 s< 0xf4041810 goto pc+0 27: (d5) if r1 s<= 0x1e007e goto pc+0 28: (b5) if r0 <= 0xe86be000 goto pc+0 29: (07) r0 += 16614 30: (c5) if r0 s< 0x6d0020da goto pc+0 31: (35) if r0 >= 0x2100ecf4 goto pc+0 Teach verifier to recognize always taken and always not taken branches. This analysis is already done for == and != comparison. Expand it to all other branches. It also helps real bpf programs to be verified faster: before after bpf_lb-DLB_L3.o 2003 1940 bpf_lb-DLB_L4.o 3173 3089 bpf_lb-DUNKNOWN.o 1080 1065 bpf_lxc-DDROP_ALL.o 29584 28052 bpf_lxc-DUNKNOWN.o 36916 35487 bpf_netdev.o 11188 10864 bpf_overlay.o 6679 6643 bpf_lcx_jit.o 39555 38437 Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
-
Neil Armstrong authored
commit ce0210c1 upstream. Since commit 2bcd3eca when switching mode from X11 (ubuntu mate for example) the display gets blurry, looking like an invalid framebuffer width. This commit fixed atomic crtc modesetting in a totally wrong way and introduced a local unnecessary ->enabled crtc state. This commit reverts the crctc _begin() and _enable() changes and simply adds drm_atomic_helper_commit_tail_rpm as helper. Reported-by:
Tony McKahan <tonymckahan@gmail.com> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Fixes: 2bcd3eca ("drm/meson: Fixes for drm_crtc_vblank_on/off support") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [narmstrong: fixed blank line issue from checkpatch] Link: https://patchwork.freedesktop.org/patch/msgid/20190114153118.8024-1-narmstrong@baylibre.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 0c9b1965 upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Nicolas Pitre authored
commit 7e1d2263 upstream. Every invocation of notify_write() and notify_update() is performed under the console lock, except for one case. Let's fix that. Signed-off-by:
-
Nicolas Pitre authored
commit 6609cff6 upstream. When kernel messages are printed to the console, they appear blank on the unicode screen. This is because vt_console_print() is lacking a call to vc_uniscr_putc(). However the later function assumes vc->vc_x is always up to date when called, which is not the case here as vt_console_print() uses it to mark the beginning of the display update. This patch reworks (and simplifies) vt_console_print() so that vc->vc_x is always valid and keeps the start of display update in a local variable instead, which finally allows for adding the missing vc_uniscr_putc() call. Signed-off-by:
-
Uwe Kleine-König authored
commit a55234da upstream. Commit cbffaf7a ("can: flexcan: Always use last mailbox for TX") introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb) and in the body accessed regs->mb[i] which is an out-of-bounds array access that then resulted in an access to an reserved register area. Later this was changed by commit 0517961c ("can: flexcan: Add provision for variable payload size") to iterate a bit differently but still runs one iteration too much resulting to call flexcan_get_mb(priv, priv->mb_count) which results in a WARN_ON and then a NULL pointer exception. This only affects devices compatible with "fsl,p1010-flexcan", "fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan", "fsl,imx28-flexcan", so newer i.MX SoCs are not affected. Fixes: cbffaf7a ("can: flexcan: Always use last mailbox for TX") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= 4.20 Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
commit 93171ba6 upstream. Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by:
Kyungtae Kim <kt0755@gmail.com> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Andre Naujoks <nautsch2@gmail.com> Signed-off-by:
-
Manfred Schlaegl authored
commit 7b12c818 upstream. This patch revert commit 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 8208d170 upstream. The way we allocate events works fine in most cases, except when multiple PCI devices share an ITS-visible DevID, and that one of them is trying to use MultiMSI allocation. In that case, our allocation is not guaranteed to be zero-based anymore, and we have to make sure we allocate it on a boundary that is compatible with the PCI Multi-MSI constraints. Fix this by allocating the full region upfront instead of iterating over the number of MSIs. MSI-X are always allocated one by one, so this shouldn't change anything on that front. Fixes: b48ac83d ("irqchip: GICv3: ITS: MSI support") Cc: stable@vger.kernel.org Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 56cb4e50 upstream. The recent addition of SPDX license identifiers to the files in drivers/net/ethernet/sun created a licensing conflict. The cassini driver files contain a proper license notice: * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. but the SPDX change added: SPDX-License-Identifier: GPL-2.0 So the file got tagged GPL v2 only while in fact it is licensed under GPL v2 or later. It's nice that people care about the SPDX tags, but they need to be more careful about it. Not everything under (the) sun belongs to ... Fix up the SPDX identifier and remove the boiler plate text as it is redundant. Fixes: c861ef83 ("sun: Add SPDX license tags to Sun network drivers") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Shannon Nelson <shannon.nelson@oracle.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Acked-by:
Shannon Nelson <shannon.lee.nelson@gmail.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Thomas Gleixner authored
commit 93ad0fc0 upstream. The recent commit which prevented a division by 0 issue in the alarm timer code broke posix CPU timers as an unwanted side effect. The reason is that the common rearm code checks for timer->it_interval being 0 now. What went unnoticed is that the posix cpu timer setup does not initialize timer->it_interval as it stores the interval in CPU timer specific storage. The reason for the separate storage is historical as the posix CPU timers always had a 64bit nanoseconds representation internally while timer->it_interval is type ktime_t which used to be a modified timespec representation on 32bit machines. Instead of reverting the offending commit and fixing the alarmtimer issue in the alarmtimer code, store the interval in timer->it_interval at CPU timer setup time so the common code check works. This also repairs the existing inconistency of the posix CPU timer code which kept a single shot timer armed despite of the interval being 0. The separate storage can be removed in mainline, but that needs to be a separate commit as the current one has to be backported to stable kernels. Fixes: 0e334db6 ("posix-timers: Fix division by zero bug") Reported-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
-
Jan Beulich authored
commit fc24d75a upstream. While in the native case entry into the kernel happens on the trampoline stack, PV Xen kernels get entered with the current thread stack right away. Hence source and destination stacks are identical in that case, and special care is needed. Other than in sync_regs() the copying done on the INT80 path isn't NMI / #MC safe, as either of these events occurring in the middle of the stack copying would clobber data on the (source) stack. There is similar code in interrupt_entry() and nmi(), but there is no fixup required because those code paths are unreachable in XEN PV guests. [ tglx: Sanitized subject, changelog, Fixes tag and stable mail address. Sigh ] Fixes: 7f2590a1 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries") Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: xen-devel@lists.xenproject.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/5C3E1128020000780020DFAD@prv1-mh.provo.novell.comSigned-off-by:
-
Daniel Drake authored
commit 7e6fc2f5 upstream. The outb() function takes parameters value and port, in that order. Fix the parameters used in the kalsr i8254 fallback code. Fixes: 5bfce5ef ("x86, kaslr: Provide randomness functions") Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Dave Hansen authored
commit e1812933 upstream. There was a bug where the per-mm pkey state was not being preserved across fork() in the child. fork() is performed in the pkey selftests, but all of the pkey activity is performed in the parent. The child does not perform any actions sensitive to pkey state. To make the test more sensitive to these kinds of bugs, add a fork() where the parent exits, and execution continues in the child. To achieve this let the key exhaustion test not terminate at the first allocation failure and fork after 2*NR_PKEYS loops and continue in the child. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
commit a31e184e upstream. Memory protection key behavior should be the same in a child as it was in the parent before a fork. But, there is a bug that resets the state in the child at fork instead of preserving it. The creation of new mm's is a bit convoluted. At fork(), the code does: 1. memcpy() the parent mm to initialize child 2. mm_init() to initalize some select stuff stuff 3. dup_mmap() to create true copies that memcpy() did not do right For pkeys two bits of state need to be preserved across a fork: 'execute_only_pkey' and 'pkey_allocation_map'. Those are preserved by the memcpy(), but mm_init() invokes init_new_context() which overwrites 'execute_only_pkey' and 'pkey_allocation_map' with "new" values. The author of the code erroneously believed that init_new_context is *only* called at execve()-time. But, alas, init_new_context() is used at execve() and fork(). The result is that, after a fork(), the child's pkey state ends up looking like it does after an execve(), which is totally wrong. pkeys that are already allocated can be allocated again, for instance. To fix this, add code called by dup_mmap() to copy the pkey state from parent to child explicitly. Also add a comment above init_new_context() to make it more clear to the next poor sod what this code is used for. Fixes: e8c24d3a ("x86/pkeys: Allocation/free syscalls") Signed-off-by:
-
KarimAllah Ahmed authored
commit 22a7cdca upstream. The spec only requires the posted interrupt descriptor address to be 64-bytes aligned (i.e. bits[0:5] == 0). Using page_address_valid also forces the address to be page aligned. Only validate that the address does not cross the maximum physical address without enforcing a page alignment. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: 6de84e58 ("nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2") Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Krish Sadhuhan <krish.sadhukhan@oracle.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> From: Mark Mielke <mark.mielke@gmail.com> Signed-off-by:
-
Tom Roeder authored
commit 3a33d030 upstream. This changes the allocation of cached_vmcs12 to use kzalloc instead of kmalloc. This removes the information leak found by Syzkaller (see Reported-by) in this case and prevents similar leaks from happening based on cached_vmcs12. It also changes vmx_get_nested_state to copy out the full 4k VMCS12_SIZE in copy_to_user rather than only the size of the struct. Tested: rebuilt against head, booted, and ran the syszkaller repro https://syzkaller.appspot.com/text?tag=ReproC&x=174efca3400000 without observing any problems. Reported-by: syzbot+ded1696f6b50b615b630@syzkaller.appspotmail.com Fixes: 8fcc4b59 Cc: stable@vger.kernel.org Signed-off-by:
Tom Roeder <tmroeder@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit de81c2f9 upstream. KVM hypercalls return a negative value error code in case of a fatal error, e.g. when the hypercall isn't supported or was made with invalid parameters. WARN_ONCE on fatal errors when sending PV IPIs as any such error all but guarantees an SMP system will hang due to a missing IPI. Fixes: aaffcfd1 ("KVM: X86: Implement PV IPIs in linux guest") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
commit 1ed199a4 upstream. The recognition of the KVM_HC_SEND_IPI hypercall was unintentionally wrapped in "#ifdef CONFIG_X86_64", causing 32-bit KVM hosts to reject any and all PV IPI requests despite advertising the feature. This results in all KVM paravirtualized guests hanging during SMP boot due to IPIs never being delivered. Fixes: 4180bf1b ("KVM: X86: Implement "send IPI" hypercall") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Alexander Popov authored
commit 5cc244a2 upstream. The single-step debugging of KVM guests on x86 is broken: if we run gdb 'stepi' command at the breakpoint when the guest interrupts are enabled, RIP always jumps to native_apic_mem_write(). Then other nasty effects follow. Long investigation showed that on Jun 7, 2017 the commit c8401dda ("KVM: x86: fix singlestepping over syscall") introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can be called without X86_EFLAGS_TF set. Let's fix it. Please consider that for -stable. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: c8401dda ("KVM: x86: fix singlestepping over syscall") Signed-off-by:
-
Alex Deucher authored
commit f15f3eb2 upstream. Needs ATPX rather than _PR3 for dGPU power control. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=202263Reviewed-by:
Jim Qu <Jim.Qu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Milan Broz authored
commit 1856b9f7 upstream. The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit d445bd9c upstream. Commit 00a0ea33 ("dm thin: do not queue freed thin mapping for next stage processing") changed process_prepared_discard_passdown_pt1() to increment all the blocks being discarded until after the passdown had completed to avoid them being prematurely reused. IO issued to a thin device that breaks sharing with a snapshot, followed by a discard issued to snapshot(s) that previously shared the block(s), results in passdown_double_checking_shared_status() being called to iterate through the blocks double checking their reference count is zero and issuing the passdown if so. So a side effect of commit 00a0ea33 is passdown_double_checking_shared_status() was broken. Fix this by checking if the block reference count is greater than 1. Also, rename dm_pool_block_is_used() to dm_pool_block_is_shared(). Fixes: 00a0ea33 ("dm thin: do not queue freed thin mapping for next stage processing") Cc: stable@vger.kernel.org # 4.9+ Reported-by: ryan.p.norwood@gmail.com Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Marc Gonzalez authored
commit d6724756 upstream. memcpy_fromio() doesn't provide any control over access size. For example, on arm64, it is implemented using readb and readq. This may trigger a synchronous external abort: [ 3.729943] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 3.737000] Modules linked in: [ 3.744371] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S 4.20.0-rc4 #16 [ 3.747413] Hardware name: Qualcomm Technologies, Inc. MSM8998 v1 MTP (DT) [ 3.755295] pstate: 00000005 (nzcv daif -PAN -UAO) [ 3.761978] pc : __memcpy_fromio+0x68/0x80 [ 3.766718] lr : ufshcd_dump_regs+0x50/0xb0 [ 3.770767] sp : ffff00000807ba00 [ 3.774830] x29: ffff00000807ba00 x28: 00000000fffffffb [ 3.778344] x27: ffff0000089db068 x26: ffff8000f6e58000 [ 3.783728] x25: 000000000000000e x24: 0000000000000800 [ 3.789023] x23: ffff8000f6e587c8 x22: 0000000000000800 [ 3.794319] x21: ffff000008908368 x20: ffff8000f6e1ab80 [ 3.799615] x19: 000000000000006c x18: ffffffffffffffff [ 3.804910] x17: 0000000000000000 x16: 0000000000000000 [ 3.810206] x15: ffff000009199648 x14: ffff000089244187 [ 3.815502] x13: ffff000009244195 x12: ffff0000091ab000 [ 3.820797] x11: 0000000005f5e0ff x10: ffff0000091998a0 [ 3.826093] x9 : 0000000000000000 x8 : ffff8000f6e1ac00 [ 3.831389] x7 : 0000000000000000 x6 : 0000000000000068 [ 3.836676] x5 : ffff8000f6e1abe8 x4 : 0000000000000000 [ 3.841971] x3 : ffff00000928c868 x2 : ffff8000f6e1abec [ 3.847267] x1 : ffff00000928c868 x0 : ffff8000f6e1abe8 [ 3.852567] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 3.857900] Call trace: [ 3.864473] __memcpy_fromio+0x68/0x80 [ 3.866683] ufs_qcom_dump_dbg_regs+0x1c0/0x370 [ 3.870522] ufshcd_print_host_regs+0x168/0x190 [ 3.874946] ufshcd_init+0xd4c/0xde0 [ 3.879459] ufshcd_pltfrm_init+0x3c8/0x550 [ 3.883264] ufs_qcom_probe+0x24/0x60 [ 3.887188] platform_drv_probe+0x50/0xa0 Assuming aligned 32-bit registers, let's use readl, after making sure that 'offset' and 'len' are indeed multiples of 4. Fixes: ba80917d ("scsi: ufs: ufshcd_dump_regs to use memcpy_fromio") Cc: <stable@vger.kernel.org> Signed-off-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Williams authored
commit 11189c10 upstream. The _DSM function number validation only happens to succeed when the generic Linux command number translation corresponds with a DSM-family-specific function number. This breaks NVDIMM-N implementations that correctly implement _LSR, _LSW, and _LSI, but do not happen to publish support for DSM function numbers 4, 5, and 6. Recall that the support for _LS{I,R,W} family of methods results in the DIMM being marked as supporting those command numbers at acpi_nfit_register_dimms() time. The DSM function mask is only used for ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices. Fixes: 31eca76b ("nfit, libnvdimm: limited/whitelisted dimm command...") Cc: <stable@vger.kernel.org> Link: https://github.com/pmem/ndctl/issues/78Reported-by:
Sujith Pandel <sujith_pandel@dell.com> Tested-by:
Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 5e9e38d0 upstream. In preparation for using function number 0 as an error value, prevent it from being considered a valid function value by acpi_nfit_ctl(). Cc: <stable@vger.kernel.org> Cc: stuart hayes <stuart.w.hayes@gmail.com> Fixes: e02fb726 ("nfit: add Microsoft NVDIMM DSM command set...") Reported-by:
-
Dmitry Torokhov authored
commit d77651a2 upstream. An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by:
Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Deepa Dinamani authored
commit 2e746942 upstream. The usec part of the timeval is defined as __kernel_suseconds_t tv_usec; /* microseconds */ Arnd noticed that sparc64 is the only architecture that defines __kernel_suseconds_t as int rather than long. This breaks the current y2038 fix for kernel as we only access and define the timeval struct for non-kernel use cases. But, this was hidden by an another typo in the use of __KERNEL__ qualifier. Fix the typo, and provide an override for sparc64. Fixes: 152194fe ("Input: extend usable life of event timestamps to 2106 on 32 bit systems") Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Tom Panfil authored
commit fe2bfd0d upstream. Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by:
Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Ronnie Sahlberg authored
commit 2e5700bd upstream. Otherwise we gradually leak credits leading to potential hung session. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
commit ef68e831 upstream. When executing add_credits() we currently call cifs_reconnect() if the number of credits is zero and there are no requests in flight. In this case we may call cifs_reconnect() recursively twice and cause memory corruption given the following sequence of functions: mid1.callback() -> add_credits() -> cifs_reconnect() -> -> mid2.callback() -> add_credits() -> cifs_reconnect(). Fix this by avoiding to call cifs_reconnect() in add_credits() and checking for zero credits in the demultiplex thread. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit ec678eae upstream. We do need to account for credits received in error responses to read requests on encrypted sessions. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 8004c78c upstream. Currently we mark MID as malformed if we get an error from server in a read response. This leads to not properly processing credits in the readv callback. Fix this by marking such a response as normal received response and process it appropriately. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit acc58d0b upstream. When doing MTU i/o we need to leave some credits for possible reopen requests and other operations happening in parallel. Currently we leave 1 credit which is not enough even for reopen only: we need at least 2 credits if durable handle reconnect fails. Also there may be other operations at the same time including compounding ones which require 3 credits at a time each. Fix this by leaving 8 credits which is big enough to cover most scenarios. Was able to reproduce this when server was configured to give out fewer credits than usual. The proper fix would be to reconnect a file handle first and then obtain credits for an MTU request but this leads to bigger code changes and should happen in other patches. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nicolas Pitre authored
commit bfd8d8fe upstream. When CONFIG_VGACON_SOFT_SCROLLBACK is selected, the VGA display memory index and vc_visible_origin don't change when scrollback is activated. The actual screen content is saved away and the scrollbackdata is copied over it. However the vt code, and /dev/vcs devices in particular, still expect vc_origin to always point at the actual screen content not the displayed scrollback content. So adjust vc_origin to point at the saved screen content when scrollback is active and set it back to vc_visible_origin when restoring the screen. This fixes /dev/vcsa<n> that return scrollback content when they shouldn't (onli /dev/vcsa without a number should), and also fixes /dev/vcsu that should return scrollback content when scrollback is active but currently doesn't. An unnecessary call to vga_set_mem_top() is also removed. Signed-off-by:
-
Dexuan Cui authored
commit ba50bf1c upstream. fc96df16 is good and can already fix the "return stack garbage" issue, but let's also improve hv_ringbuffer_get_debuginfo(), which would silently return stack garbage, if people forget to check channel->state or ring_info->ring_buffer, when using the function in the future. Having an error check in the function would eliminate the potential risk. Add a Fixes tag to indicate the patch depdendency. Fixes: fc96df16 ("Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit da8ced36 upstream. Hyper-V memory hotplug protocol has 2M granularity and in Linux x86 we use 128M. To deal with it we implement partial section onlining by registering custom page onlining callback (hv_online_page()). Later, when more memory arrives we try to online the 'tail' (see hv_bring_pgs_online()). It was found that in some cases this 'tail' onlining causes issues: BUG: Bad page state in process kworker/0:2 pfn:109e3a page:ffffe08344278e80 count:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0xfffff80000000() raw: 000fffff80000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount ... Workqueue: events hot_add_req [hv_balloon] Call Trace: dump_stack+0x5c/0x80 bad_page.cold.112+0x7f/0xb2 free_pcppages_bulk+0x4b8/0x690 free_unref_page+0x54/0x70 hv_page_online_one+0x5c/0x80 [hv_balloon] hot_add_req.cold.24+0x182/0x835 [hv_balloon] ... Turns out that we now have deferred struct page initialization for memory hotplug so e.g. memory_block_action() in drivers/base/memory.c does pages_correctly_probed() check and in that check it avoids inspecting struct pages and checks sections instead. But in Hyper-V balloon driver we do PageReserved(pfn_to_page()) check and this is now wrong. Switch to checking online_section_nr() instead. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
Paul Fulghum authored
commit fc01d8c6 upstream. Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user call while current is TASK_INTERRUPTIBLE. This is a false positive since the code path does not depend on current state remaining TASK_INTERRUPTIBLE. The loop breaks out and sets TASK_RUNNING after calling copy_to_user. This patch supresses the warning by setting TASK_RUNNING before calling copy_to_user. [1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Reported-by:
syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Acked-by:
-
