- 31 Aug, 2016 11 commits
-
-
Ken Wang authored
Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Ken Wang <Qingqing.Wang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ken Wang authored
Reviewed-by:
-
Huang Rui authored
This patch adds pcie port read/write entry, because it will be also used on si dpm part. Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Ken Wang authored
v5: rebase fixes v6: add mgcg arrays v7: rebase fixes v8: rebase fixes v9: add get_disabled_bios(), make get_xclk static v10: fix oland and hainan asic specific handle at si_program_aspm Signed-off-by:
-
Ken Wang authored
v4: rebase fixes v5: use the generic nop fill v6: rebase fixes v7: rebase fixes copy count fixes from Jonathan general cleanup add fill buffer implementation v8: adapt write_pte and copy_pte to latest changes Signed-off-by: -
Ken Wang authored
v5: rebase fixes v6: rebase fixes v7: rebase fixes fix tile reg offset as noticed by Jonathan Drop some debugging remnants v8: add gfx v6 firmware versions for sysfs dump Acked-by: -
Ken Wang authored
v3: white space fixes Reviewed-by:
-
Ken Wang authored
v4: rebase fixups v5: more fixes based on dce8 code v6: squash in dmif offset fix v7: rebase fixups v8: rebase fixups, drop some debugging remnants v9: fix BE build v10: include Marek's tiling fixes, add support for page_flip_target, set MASTER_UDPATE_MODE=0, fix cursor Acked-by: -
Ken Wang authored
v3: rebase fixups Reviewed-by:
-
Ken Wang authored
v4: rebase fixups v5: rebase fixups v5: rebase fixups v6: rebase fixups for gart size changes v7: add gmc v6 firmware versions for sysfs dump Signed-off-by:
-
Ken Wang authored
v4: drop unused DCE6 macro Acked-by:
-
- 30 Aug, 2016 9 commits
-
-
Ken Wang authored
Reviewed-by:
-
Monk Liu authored
sync switch buffer scheme with windows kmd for gfx v8, step1: append a switch_buffer to the end of CS v2:rebase on latest staging Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Signed-off-by:
-
Tom St Denis authored
Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Jordan Lazare authored
If treating warnings as errors this causes a build error Signed-off-by:
Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by:
-
Tom St Denis authored
Only load the SDMA0/MEC1 firmware once in the Carrizo SMU manager driver. (v2) Avoid loading SDMA0 twice too. Signed-off-by:
-
Tom St Denis authored
Signed-off-by:
-
Tom St Denis authored
Signed-off-by:
-
Tom St Denis authored
Remove an errant return in the middle of the check function as well as check for success in the start function. (v2) Add return check to smu_load_fw() (v3) Don't return early if SMU load check fails (v4) No returns! :-) Signed-off-by:
-
Marek Olšák authored
The old mechanism used a per-submission limit that didn't take previous submissions within the same time frame into account. It also filled VRAM slowly when VRAM usage dropped due to a big eviction or buffer deallocation. This new method establishes a configurable MBps limit that is obeyed when VRAM usage is very high. When VRAM usage is not very high, it gives the driver the freedom to fill it quickly. The result is more consistent performance. It can't keep the BO move rate low if lots of evictions are happening due to VRAM fragmentation, or if a big buffer is being migrated. The amdgpu.moverate parameter can be used to set a non-default limit. Measurements can be done to find out which amdgpu.moverate setting gives the best results. Mainly APUs and cards with small VRAM will benefit from this. For F1 2015, anything with 2 GB VRAM or less will benefit. Some benchmark results - F1 2015 (Tonga 2GB): Limit MinFPS AvgFPS Old code: 14 32.6 128 MB/s: 28 41 64 MB/s: 15.5 43 32 MB/s: 28.7 43.4 8 MB/s: 27.8 44.4 8 MB/s: 21.9 42.8 (different run) Random drops in Min FPS can still occur (due to fragmented VRAM?), but the average FPS is much better. 8 MB/s is probably a good limit for this game & the current VRAM management. The random FPS drops are still to be tackled. v2: use a spinlock Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Acked-by:
-
- 25 Aug, 2016 13 commits
-
-
Tom St Denis authored
Various minor formatting changes. Signed-off-by:
-
Tom St Denis authored
If init fails free up any allocated memory. Signed-off-by:
-
Tom St Denis authored
If one of the entries fails to be allocated then free all of the previous entries before freeing the array which holds their pointers. Signed-off-by:
-
Rex Zhu authored
uvd dpm will be controlled by uvd. dpm just disable uvd dpm in case of suspend when play video. due to the new logic of uvd_begin_use/end_use, if disable uvd dpm in late init, will have no chance to enable uvd dpm after resume until play video again. Change-Id: I70e3d7efe63edad37f26e6c5ea089da1135c0ab5 Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Rex Zhu authored
delete the members not needed when amd_powerplay_init. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Rex Zhu authored
sub_vendor_id in cgs interface. Signed-off-by:
-
Rex Zhu authored
fix issue that encode test failed on the second time when vce dpm enabled on tonga. Signed-off-by:
-
Rex Zhu authored
fix issue after vce encode, the eclk stay high. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Alex Deucher authored
Not of much use at the moment (we don't really use the second ring either), but may be useful later. Reviewed-by:
JimQu <Jim.Qu@amd.com> Reviewed-by:
-
Alex Deucher authored
Rather than using a hardcoded value. This allows different versions to expose more or less rings. No functional change. Reviewed-by:
-
Alex Deucher authored
The old names were dragged over from radeon. The new ones better match the naming conventions used in the driver. No functional change. Signed-off-by:
-
- 24 Aug, 2016 7 commits
-
-
Christian König authored
Try to be clean here, even when it's a noop on x86. Signed-off-by:
-
Christian König authored
Also use the firmware size from the header instead of calculating it. Signed-off-by:
-
Rex Zhu authored
Reviewed-by:
-
Alex Deucher authored
Replace packet2's with packet0 writes to UVD_NO_OP. The value written to UVD_NO_OP does not matter. Reviewed-by:
-
Alex Deucher authored
Replace packet2's with packet0 writes to UVD_NO_OP. The value written to UVD_NO_OP does not matter. Reviewed-by:
-
Alex Deucher authored
Writes to this register are the preferred way to do NOPs. Bump the driver version as well. Reviewed-by:
-
Alex Deucher authored
Writes to this register are the preferred way to do NOPs. Bump the driver version as well. Reviewed-by:
-
