- 21 Sep, 2010 9 commits
-
-
Vasiliy Kulikov authored
g_pBlockTable has only DeviceInfo.wDataBlockNum elements. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vasiliy Kulikov authored
kmalloc() may fail, if so return error code. Signed-off-by:
-
Pavan Savoy authored
move all the header information to ti_wilink_st.h. This header would then not only serve the local modules like the st_core.c, st_kim.c and st_ll.c but also the external modules/protocol drivers that are dependent on the shared transport driver. Modify the source files to include the new header ti_wilink_st.h, Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Signed-off-by:
-
Pavan Savoy authored
replace uint and family by a much more proper u8/u16 types. This is required specifically for data members of structures coming in from the chip and data members parsed from the binary firmware file. Signed-off-by:
-
Vipin Mehta authored
The commit fixes a race condition in the initialization portion of the driver. The problem was observed while testing with the kernel in the staging-next tree. The wait on the ready event is signalled prematurely before setting the arVersion.wlan_ver and arVersion.abi_ver. The code waiting on this semaphore checks for the validity of these values and hence may proceed with an un-updated values of these fields. The wakeup signal is now sent after these values are set. Signed-off-by:
Vipin Mehta <vmehta@atheros.com> Signed-off-by:
-
Vipin Mehta authored
The commit fixes a compilation error that was encountered while using a specific kernel configuration file. The problem was the use of some functions defined in <linux/semaphore.h> without including the header file explicitly. It was probably working before because of the dependency getting implicitly satisfied via some other header file. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Vipin Mehta authored
Eliminating the inclusion of the same header file more than once. The files being removed are already included by osapi_linux.h. Reported-by:
-
Maurice Dawson authored
This is a patch to the adl_pci9111.c file that fixes all, printk() should include KERN-facility level, warnings found by the checkpatch.pl tool Signed-off-by:
Maurice Dawson <mauricedawson2699@gmail.com> Signed-off-by:
-
Charles Clément authored
Signed-off-by:
Charles Clément <caratorn@gmail.com> Signed-off-by:
-
- 20 Sep, 2010 22 commits
-
-
Marek Lindner authored
set_primary_if is currently misused to update the mac address in vis packets. This unneeded and introduces overhead due to other operations which must be done when updating the primary interface. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Sven Eckelmann authored
set_primary_if exchanges the current primary interfaces with a new one. This is a new reference and thus we have to count it and decrease the count of the old primary interface. Signed-off-by:
-
Sven Eckelmann authored
The return of get_batman_if_by_netdev and get_active_batman_if leaks a pointer from the rcu protected list of interfaces. We must protect it to prevent a too early release of the memory. Those functions must increase the reference counter before rcu_read_unlock or it may be to late to prevent a free. hardif_add_interface must also increase the reference count for the returned batman_if to make the behaviour consistent. Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Sven Eckelmann authored
get_batman_if_by_netdev and get_active_batman_if may leak data from the rcu protected list of interfaces. The rcu protected list of all gateway nodes leaks the actual data outside the read-side critical area. This is not valid as we may free the data using a call_rcu created callback after we unlock using rcu_read_unlock. A workaround is to provide a reference count to be sure that the memory isn't freed to early. It is currently only to implement the already existing functionality and doesn't provide the full tracking of all usage cases. Additionally, we must hardif_hold inside the rcu_read_lock()..rcu_read_unlock() before we attach to the structure which "leaks" it. When another function now removed it from its usage context (primary_if, usage on stack, ...) then we must hardif_put it. If it is decremented to zero then we can issue the call_rcu to the freeing function. So "put" is not allowed inside an rcu_read_lock. Signed-off-by:
-
Sven Eckelmann authored
It is recommended [1] to use synchronize_rcu to simplify the code - especially when otherwise extra locking is needed to protect other code from picking stale elements. It also protects us for emitting to many callbacks which may results in OOM conditions. The only reason not to use it, would be in performance critical sections or when we are not allowed to block. [1] Documentation/RCU/checklist.txt Signed-off-by:
-
Sven Eckelmann authored
Regions which do not use rcu functions don't need to protected by rcu_read_lock. If we want to protect data from being freed than it must be covered by the same read-side critical section or otherwise the grace period may already ended and freed the memory before we called rcu_read_lock again. Signed-off-by:
-
Sven Eckelmann authored
receive_bat_packet is not called with rcu_read_lock so we must ensure by ourself that we protect list_for_each_entry_rcu using the correct RCU locks. Signed-off-by:
-
Sven Eckelmann authored
The update critical sections of if_list must be protected by a locking primitive other than RCU. The iterator must also be protected by the chosen locking mechanism. The rtnl_lock in hardif_remove_interfaces must also be moved outside the iterator primitive to ensure that we don't deadlock the kernel due to differently nested locks in hardif_remove_interfaces and hard_if_event. Signed-off-by:
-
Sven Eckelmann authored
synchronize_rcu respective synchronize_net only waits for the rcu grace period to elapse and we may fail to finish the calls which were made to call_rcu in that time. In result the module could be unloaded during the execution of the RCU callbacks. rcu_barrier[1] will now wait for all outstanding RCU callbacks to finish before continuing. [1] Documentation/RCU/rcubarrier.txt Signed-off-by:
-
Sven Eckelmann authored
We don't allow to seek in the debugfs socket and log files. Thus we should mark the file descriptor as nonseekable. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sven Eckelmann authored
The official mailing list is run on lists.open-mesh.org and it should be avoided to sent them to lists.open-mesh.net to reduce the number of receipents and double posts. Signed-off-by:
-
Sven Eckelmann authored
checkpatch now detects the start of a comment and warns about usage of multiple spaces at the beginning of a line. We have to replace the ' ' in multiple lines comments by ' * ' to fix it. Checkpatch also wants a comment after a definition of a spinlock_t which describes what it protects. It is currently not possible to add it before the actual struct which includes the spinlock. Signed-off-by:
-
Haiyang Zhang authored
Remove camel cases of vmbus packet buffer structures Remove camel cases of: struct VMBUS_CHANNEL_PACKET_PAGE_BUFFER struct VMBUS_CHANNEL_PACKET_MULITPAGE_BUFFER Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
- 16 Sep, 2010 9 commits
-
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Charles Clément authored
Signed-off-by:
-
Pavan Savoy authored
Platform devices tend to have id as -1 when only 1 device exist and a value >=0 when multiple devices exist, since we plan to store all these platform devices if multiple exist, there was a requirement to have id to be >=0. The patch fixes this problem. Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Agustin March authored
Removed a space in a comments lines at #459 Signed-off-by:
Agustin March <agustin.march@gmail.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Al Cho authored
keucr lost the disconnect, so keucr crash when plug-in and then plug-out SD-card quickly. unmark the part of usb disconnect Signed-off-by:
Al Cho <acho@novell.com> Signed-off-by:
-
Clelia V. Korol authored
Fixed the last 5 lines, indented with spaces, replacing spaces with tabs. Signed-off-by:
Clelia V. Korol <cvkorol@gmail.com> Signed-off-by:
-
