- 24 Apr, 2020 9 commits
-
-
Qiang Yu authored
For called when PM do resume/suspend. Tested-by:
Bhushan Shah <bshah@kde.org> Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-8-yuq825@gmail.com
-
Qiang Yu authored
Prepare resume/suspend PM. v2: Fix lima_pmu_wait_cmd timeout when mali400 case. Tested-by:
-
Qiang Yu authored
Used for device resume/suspend in the following commits. Tested-by:
-
Qiang Yu authored
We need to flush TLB anyway before every task start, and the page directory will be set to empty vm after suspend/resume, so always set it to the task vm even no ctx switch happens. Tested-by:
-
Qiang Yu authored
No need to handle this check before calling lima_vm_put. Tested-by:
-
Qiang Yu authored
When error task list is full, print the process info where the error task come from for debug usage. Tested-by:
-
Qiang Yu authored
Simplify module init/exit with module_platform_driver. Tested-by:
-
Robin Murphy authored
There's no point explicitly tracking the platform device when it can be trivially derived from the regular device pointer in the couple of places it's ever used. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Robin Murphy authored
Use the optional form of platform_get_irq() for blocks that legitimately may not be present, to avoid getting an annoying barrage of spurious warnings for non-existent PPs on configurations like Mali-450 MP2. Signed-off-by:
-
- 23 Apr, 2020 1 commit
-
-
Lyude Paul authored
This reverts commit 6bb0942e. Unfortunately it would appear that the rumors we've heard of sideband message interleaving not being very well supported are true. On the Lenovo ThinkPad Thunderbolt 3 dock that I have, interleaved messages appear to just get dropped: [drm:drm_dp_mst_wait_tx_reply [drm_kms_helper]] timedout msg send 00000000571ddfd0 2 1 [dp_mst] txmsg cur_offset=2 cur_len=2 seqno=1 state=SENT path_msg=1 dst=00 [dp_mst] type=ENUM_PATH_RESOURCES contents: [dp_mst] port=2 DP descriptor for this hub: OUI 90-cc-24 dev-ID SYNA3 HW-rev 1.0 SW-rev 3.12 quirks 0x0008 It would seem like as well that this is a somewhat well known issue in the field. From section 5.4.2 of the DisplayPort 2.0 specification: There are MST Sink/Branch devices in the field that do not handle interleaved message transactions. To facilitate message transaction handling by downstream devices, an MST Source device shall generate message transactions in an atomic manner (i.e., the MST Source device shall not concurrently interleave multiple message transactions). Therefore, an MST Source device shall clear the Message_Sequence_No value in the Sideband_MSG_Header to 0. MST Source devices that support field policy updates by way of software should update the policy to forego the generation of interleaved message transactions. This is a bit disappointing, as features like HDCP require that we send a sideband request every ~2 seconds for each active stream. However, there isn't really anything in the specification that allows us to accurately probe for interleaved messages. If it ends up being that we -really- need this in the future, we might be able to whitelist hubs where interleaving is known to work-or maybe try some sort of heuristics. But for now, let's just play it safe and not use it. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: 6bb0942e ("drm/dp_mst: Remove single tx msg restriction.") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200423164225.680178-1-lyude@redhat.comReviewed-by:
Sean Paul <sean@poorly.run>
-
- 21 Apr, 2020 4 commits
-
-
Gal Pressman authored
Fix a couple of typos: "as" -> "has" and "int" -> "in". Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200420074115.23931-1-galpress@amazon.com
-
Souptick Joarder authored
These are dead code since 3.7. If there is no plan to use them further, these can be removed forever. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1587406337-32317-1-git-send-email-jrdr.linux@gmail.com
-
YueHaibing authored
drivers/gpu/drm/gma500/oaktrail_hdmi.c:676:35: warning: ‘hdmi_ids’ defined but not used [-Wunused-const-variable=] static const struct pci_device_id hdmi_ids[] = { ^~~~~~~~ It is never used, remove it. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Geert Uytterhoeven authored
According to https://www.analog.com/, the company name is spelled "Analog Devices". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
- 20 Apr, 2020 1 commit
-
-
Thomas Zimmermann authored
The ast driver inherits from DRM's CRTC state, but still uses the atomic helper for struct drm_crtc_funcs.reset, drm_atomic_helper_crtc_reset(). The helper only allocates enough memory for the core CRTC state. That results in an out-ouf-bounds access when duplicating the initial CRTC state. Simplified backtrace shown below: [ 21.469321] ================================================================== [ 21.469434] BUG: KASAN: slab-out-of-bounds in ast_crtc_atomic_duplicate_state+0x84/0x100 [ast] [ 21.469445] Read of size 8 at addr ffff888036c1c5f8 by task systemd-udevd/382 [ 21.469451] [ 21.469464] CPU: 2 PID: 382 Comm: systemd-udevd Tainted: G E 5.5.0-rc6-1-default+ #214 [ 21.469473] Hardware name: Sun Microsystems SUN FIRE X2270 M2/SUN FIRE X2270 M2, BIOS 2.05 07/01/2010 [ 21.469480] Call Trace: [ 21.469501] dump_stack+0xb8/0x110 [ 21.469528] print_address_description.constprop.0+0x1b/0x1e0 [ 21.469557] ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast] [ 21.469581] ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast] [ 21.469597] __kasan_report.cold+0x1a/0x35 [ 21.469640] ? ast_crtc_atomic_duplicate_state+0x84/0x100 [ast] [ 21.469665] kasan_report+0xe/0x20 [ 21.469693] ast_crtc_atomic_duplicate_state+0x84/0x100 [ast] [ 21.469733] drm_atomic_get_crtc_state+0xbf/0x1c0 [ 21.469768] __drm_atomic_helper_set_config+0x81/0x5a0 [ 21.469803] ? drm_atomic_plane_check+0x690/0x690 [ 21.469843] ? drm_client_rotation+0xae/0x240 [ 21.469876] drm_client_modeset_commit_atomic+0x230/0x390 [ 21.469888] ? __mutex_lock+0x8f0/0xbe0 [ 21.469929] ? drm_client_firmware_config.isra.0+0xa60/0xa60 [ 21.469948] ? drm_client_modeset_commit_force+0x28/0x230 [ 21.470031] ? memset+0x20/0x40 [ 21.470078] drm_client_modeset_commit_force+0x90/0x230 [ 21.470110] drm_fb_helper_restore_fbdev_mode_unlocked+0x5f/0xc0 [ 21.470132] drm_fb_helper_set_par+0x59/0x70 [ 21.470155] fbcon_init+0x61d/0xad0 [ 21.470185] ? drm_fb_helper_restore_fbdev_mode_unlocked+0xc0/0xc0 [ 21.470232] visual_init+0x187/0x240 [ 21.470266] do_bind_con_driver+0x2e3/0x460 [ 21.470321] do_take_over_console+0x20a/0x290 [ 21.470371] do_fbcon_takeover+0x85/0x100 [ 21.470402] register_framebuffer+0x2fd/0x490 [ 21.470425] ? kzalloc.constprop.0+0x10/0x10 [ 21.470503] __drm_fb_helper_initial_config_and_unlock+0xf2/0x140 [ 21.470533] drm_fbdev_client_hotplug+0x162/0x250 [ 21.470563] drm_fbdev_generic_setup+0xd2/0x155 [ 21.470602] ast_driver_load+0x688/0x850 [ast] <...> [ 21.472625] ================================================================== Allocating enough memory for struct ast_crtc_state in a custom ast CRTC reset handler fixes the problem. v2: * implement according to drm_atomic_helper_crtc_reset() * update state with __drm_atomic_helper_crtc_reset() Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Fixes: 83be6a3c ("drm/ast: Introduce struct ast_crtc_state") Reviewed-by:
-
- 19 Apr, 2020 1 commit
-
-
Johan Jonker authored
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200403133630.7377-1-jbx6244@gmail.com
-
- 17 Apr, 2020 22 commits
-
-
Linus Walleij authored
The Tegra DRM drivers includes the legacy GPIO headers <linux/gpio.h> and <linux/of_gpio.h> but what it really uses is <linux/gpio/consumer.h> since only gpio_desc structs are ever referenced. Include the right header on the top level tegra/drm.h file and drop all the surplus includes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Chuhong Yuan authored
The driver forgets to free the I/O region in remove and probe failure. Add the missed calls to fix it. Since the success of request_region() is optional, add the "region" field in vesafb_par to represent whether request_region() succeeds. Then only call release_region() when "region" is not null. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200329145839.20076-1-hslester96@gmail.com
-
Chuhong Yuan authored
The driver forgets to free irq in remove which is requested in probe. Add the missed call to fix it. Also, the position of request_irq() in probe should be put before register_framebuffer(). Signed-off-by:
-
Chuhong Yuan authored
The driver calls register_framebuffer() in probe but does not call unregister_framebuffer() in remove. Rename current remove to __s1d13xxxfb_remove() for error handler. Then add a new remove to call unregister_framebuffer(). Signed-off-by:
-
Linus Walleij authored
This converts the SA11x0 frame buffer driver to use GPIO descriptors. Get the GPIO optional and register a look-up table specifically for the Shannon machine. Signed-off-by:
-
Jason Yan authored
Fix the following gcc warning: drivers/video/fbdev/aty/aty128fb.c:337:36: warning: ‘sdr_64’ defined but not used [-Wunused-const-variable=] static const struct aty128_meminfo sdr_64 = { ^~~~~~ Reported-by:Jason Yan <yanaijie@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
YueHaibing authored
drivers/video/fbdev/omap2/omapfb/dss/venc.c:212:33: warning: ‘venc_config_pal_bdghi’ defined but not used [-Wunused-const-variable=] static const struct venc_config venc_config_pal_bdghi = { ^~~~~~~~~~~~~~~~~~~~~ Reported-by: -
Sam Ravnborg authored
Fix following warning: vt8500lcdfb.c: In function 'vt8500lcd_blank': vt8500lcdfb.c:229:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR || ^ vt8500lcdfb.c:233:2: note: here case FB_BLANK_UNBLANK: ^~~~ Adding a simple "fallthrough;" fixed the warning. The fix was build tested. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Reported-by:
kbuild test robot <lkp@intel.com> Fixes: e41f1a98 ("fbdev: Implement simple blanking in pseudocolor modes for vt8500lcdfb") Cc: Alexey Charkov <alchark@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by:
-
Uwe Kleine-König authored
The fbdev framework doesn't care to call the .set_power callback only on changes. So the driver has to care for itself that the regulator doesn't get disabled more often than enabled. This fixes the regulator warning unbalanced disables for lcd supply which can be triggered by doing echo 4 > /sys/class/lcd/imxfb-lcd/lcd_power twice. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Reorder code a bit and then remove no longer needed function prototypes. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Reorder code a bit and then remove no longer needed function prototypes. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Reorder code a bit and then remove no longer needed function prototypes. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
CONFIG_FB_CONTROL is bool, hence the Apple "control" frame buffer driver cannot be built as a module. Replace module_init() by device_initcall(). Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Add COMPILE_TEST support to controlfb driver for better compile testing coverage. While at it: - convert driver to use eieio() and dcbf() helpers instead of open-coding them - add invalid_vram_cache() helper to avoid code duplication Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Use in_le32() instead of le32_to_cpup() to fix sparse warning about improper type of the argument. Also drop inline keyword from control_par_to_var() prototype (to match function definition). Acked-by:
-
Andy Shevchenko authored
There is no need to have forward declaration of struct ssd1307fb_par. Drop it for good. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Use the atomic API wherever appropriate and get rid of pwm_apply_args() call (the reference period and polarity are now explicitly set when calling pwm_apply_state()). We also make use of the pwm_set_relative_duty_cycle() helper to ease relative to absolute duty_cycle conversion. Signed-off-by:
-
Andy Shevchenko authored
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by:
-
Andy Shevchenko authored
Introduce temporary variable to increase readability of the code. Signed-off-by:
-
Andy Shevchenko authored
Use the ->probe_new() callback. The driver does not use const struct i2c_device_id * argument, so convert it to utilise the simplified I²C driver registration. Signed-off-by:
-
Thomas Zimmermann authored
Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next Topic pull request for topic/phy-compliance: - Standardize DP_PHY_TEST_PATTERN name. - Add support for setting/getting test pattern from sink. - Implement DP PHY compliance to i915. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging required to pull topic/phy-compliance. Signed-off-by:
-
- 16 Apr, 2020 1 commit
-
-
Andrzej Pietrasiewicz authored
drm_gem_fb_init() is passed the fb and never allocates it, so it should be not the one freeing it. As it is now the second call to kfree() is possible with the same fb. Coverity reported the following: *** CID 1492613: Memory - corruptions (USE_AFTER_FREE) /drivers/gpu/drm/drm_gem_framebuffer_helper.c: 230 in drm_gem_fb_create_with_funcs() 224 fb = kzalloc(sizeof(*fb), GFP_KERNEL); 225 if (!fb) 226 return ERR_PTR(-ENOMEM); 227 228 ret = drm_gem_fb_init_with_funcs(dev, fb, file, mode_cmd, funcs); 229 if (ret) { vvv CID 1492613: Memory - corruptions (USE_AFTER_FREE) vvv Calling "kfree" frees pointer "fb" which has already been freed. [Note: The source code implementation of the function has been overridden by a user model.] 230 kfree(fb); 231 return ERR_PTR(ret); 232 } 233 234 return fb; 235 } drm_gem_fb_init_with_funcs() calls drm_gem_fb_init() drm_gem_fb_init() calls kfree(fb) Reported-by:coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1492613 ("Memory - corruptions") Fixes: f2b816d7 ("drm/core: Allow drivers allocate a subclass of struct drm_framebuffer") Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by:
-
- 15 Apr, 2020 1 commit
-
-
Sam Ravnborg authored
Tomi noticed that several DSI panels was wrongly described in panel-simple.yaml. Move them to panel-simple-dsi.yaml where they belong. Signed-off-by:
-
