- 23 Jul, 2010 24 commits
-
-
Ben Hutchings authored
commit a095cfc4 "3c59x: Specify window explicitly for access to windowed registers" changed the first parameter to mdio_sync(), from a pointer to the register mapping, to a pointer to the vortex_private structure, and changed all but one of the call sites. Fix that last one. Reported-by:
Luca Falavigna <dktrkranz@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kulikov Vasiliy authored
vpd_data[] is allocated as kmalloc(256, GFP_KERNEL), so if cnt = 255 then (cnt + 3) overflows 256. memset() is executed without checking. vpd_data[cnt+2] must be less than 256-cnt-2 as the latter is number of vpd_data[] elements to copy. Do not fill with zero the beginning of nic->serial_num as it will be filled with vpd_data[]. String in product_name[] should be terminated by '\0'. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Dan Carpenter authored
We assume that "pd" can be null on the previous line, and throughout the function so we should check it here as well. This was introduced by 9b2c2ff7 "mv643xx_eth: use sw csum for big packets" Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Kulikov Vasiliy authored
If vortex_probe1() fails we should unmap ioaddr mapped earlier. Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
Ajit Khaparde <ajitk@serverengines.com> Signed-off-by:
-
Ajit Khaparde authored
This patch changes names of some variables. Signed-off-by:
-
Ajit Khaparde authored
When a virtual function driver in initialized, the network mac query command can fail. Skip display of error message in that case. Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
If a mac address has not been configured for a VF, there is no need to call be_cmd_pmac_del. Signed-off-by:
-
Ursula Braun authored
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Julia Lawall authored
The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ursula Braun authored
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by:
-
Ursula Braun authored
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by:
-
Ursula Braun authored
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by:
-
Ursula Braun authored
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by:
-
Carsten Otte authored
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Klaus-Dieter Wacker authored
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by:
Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by:
-
- 22 Jul, 2010 10 commits
-
-
Dan Carpenter authored
If the allocations fail in either dwmac1000_setup() or dwmac100_setup() then return NULL. These are called from stmmac_mac_device_setup(). The check for NULL returns in stmmac_mac_device_setup() needed to be moved forward a couple lines. Signed-off-by:
-
Dan Carpenter authored
Negate has precedence over comparison so the original assert only checked that "rfml->fragment_size" was larger than 1 or 0. Signed-off-by:
-
Jay Vosburgh authored
When copying VLAN information to or removing from a slave during slave addition or removal, the bonding code currently holds the bond->lock for write to prevent concurrent modification of the vlan_list / vlgrp. This is unnecessary, as all of these operations occur under RTNL. Holding the bond->lock also caused might_sleep issues for some drivers' ndo_vlan_* functions. This patch removes the extra locking. Problem reported by Michael Chan <mchan@broadcom.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Jay Vosburgh authored
After commit ad1afb00 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") it is now regular practice for a VLAN "add vid" for VLAN 0 to arrive prior to any VLAN registration or creation of a vlan_group. This patch updates the bonding code that tests for the presence of VLANs configured above bonding. The new logic tests for bond->vlgrp to determine if a registration has occured, instead of testing that bonding's internal vlan_list is empty. The old code would panic when vlan_list was not empty, but vlgrp was still NULL (because only an "add vid" for VLAN 0 had occured). Bonding still adds VLAN 0 to its internal list so that 802.1p frames are handled correctly on transmit when non-VLAN accelerated slaves are members of the bond. The test against bond->vlan_list remains in bond_dev_queue_xmit for this reason. Modification to the bond->vlgrp now occurs under lock (in addition to RTNL), because not all inspections of it occur under RTNL. Additionally, because 8021q will never issue a "kill vid" for VLAN 0, there is now logic in bond_uninit to release any remaining entries from vlan_list. Signed-off-by:
-
Wolfram Sang authored
After the change from mdio polling to irq, it became necessary to restore the interrupt mask after resetting the chip in fec_stop(). Otherwise, with all irqs disabled, no communication with the PHY will be possible after e.g. un-/replugging the cable and the device gets stalled. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Kulikov Vasiliy authored
pci_iomap() can fail, handle this case and return -ENOMEM from probe function. Signed-off-by:
-
Eric Dumazet authored
Add a new rt attribute, RTA_MARK, and use it in rt_fill_info()/inet_rtm_getroute() to support following commands : ip route get 192.168.20.110 mark NUMBER ip route get 192.168.20.108 from 192.168.20.110 iif eth1 mark NUMBER ip route list cache [192.168.20.110] mark NUMBER Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Marc Kleine-Budde authored
This core is found on some Freescale SoCs and also some Coldfire SoCs. Support for Coldfire is missing though at the moment as they have an older revision of the core which does not have RX FIFO support. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
David S. Miller authored
Reported by Stephen Rothwell. Signed-off-by: -
David S. Miller authored
Reported by Stephen Rothwell. Signed-off-by:
-
- 21 Jul, 2010 6 commits
-
-
Gustavo F. Padovan authored
Network code uses the __packed macro instead of __attribute__((packed)). Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Gustavo F. Padovan authored
Remove IRDA_PACKED macro, which maps to __attribute__((packed)). IRDA is one of the last users of __attribute__((packet)). Networking code uses __packed now. Signed-off-by:
-
Kulikov Vasiliy authored
Use for_each_pci_dev() to simplify the code. Signed-off-by:
-
Joe Perches authored
Add and use a few neatening macros Remove PFX Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert printk(KERN_ERR to pr_err( $ size drivers/net/qlge/built-in.o.* text data bss dec hex filename 116456 2312 25712 144480 23460 drivers/net/qlge/built-in.o.old 114909 2312 25728 142949 22e65 drivers/net/qlge/built-in.o.new Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Julia Lawall authored
There are two initializations of ndo_set_mac_address, one to a local function that is not used otherwise and one to a function that is defined elsewhere. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)<int(pr[0].line) or int(ps[0].column)<int(pr[0].column): cocci.print_main(fld,p0) // </smpl> akpm: - Use the standard eth_mac_addr() in uml_net_set_mac() - Remove unneeded and racy local set_ether_mac() - Remove duplicated (and incorrect) uml_netdev_ops.ndo_set_mac_address initializer. Fixes 8bb95b39 ("uml: convert network device to netdevice ops"). [akpm@linux-foundation.org: rework as above] Signed-off-by:
-
Andy Shevchenko authored
Get rid of own implementation of hex_to_bin(). Signed-off-by:
Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by:
Divy Le Ray <divy@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
