- 31 Aug, 2020 35 commits
-
-
Miaohe Lin authored
The arg exact_dif is not used anymore, remove it. inet_exact_dif_match() is no longer needed after the above is removed, so remove it too. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
The arg exact_dif is not used anymore, remove it. inet6_exact_dif_match() is no longer needed after the above is removed, remove it too. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== net: phy: add Lynx PCS MDIO module Add support for the Lynx PCS as a separate module in drivers/net/phy/. The advantage of this structure is that multiple ethernet or switch drivers used on NXP hardware (ENETC, Seville, Felix DSA switch etc) can share the same implementation of PCS configuration and runtime management. The module implements phylink_pcs_ops and exports a phylink_pcs (incorporated into a lynx_pcs) which can be directly passed to phylink through phylink_pcs_set. The first 3 patches add some missing pieces in phylink and the locked mdiobus write accessor. Next, the Lynx PCS MDIO module is added as a standalone module. The majority of the code is extracted from the Felix DSA driver. The last patch makes the necessary changes in the Felix and Seville drivers in order to use the new common PCS implementation. At the moment, USXGMII (only with in-band AN), SGMII, QSGMII (with and without in-band AN) and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS MDIO module since these were also supported by Felix and no functional change is intended at this time. Changes in v2: * got rid of the mdio_lynx_pcs structure and directly exported the functions without the need of an indirection * made the necessary adjustments for this in the Felix DSA driver * solved the broken allmodconfig build test by making the module tristate instead of bool * fixed a memory leakage in the Felix driver (the pcs structure was allocated twice) Changes in v3: * added support for PHYLINK PCS ops in DSA (patch 5/9) * cleanup in Felix PHYLINK operations and migrate to phylink_mac_link_up() being the callback of choice for applying MAC configuration (patches 6-8) Changes in v4: * use the newly introduced phylink PCS mechanism * install the phylink_pcs in the phylink_mac_config DSA ops * remove the direct implementations of the PCS ops * do no use the SGMII_ prefix when referring to the IF_MORE register * add a phylink helper to decode the USXGMII code word * remove cleanup patches for Felix (these have been already accepted) * Seville (recently introduced) now has PCS support through the same Lynx PCS module Changes in v5: - move the pcs-lynx driver to drivers/net/pcs - reword the commit message a bit in 4/5 - add error checking and error propagation in 4/5 - s/IF_MODE_DUPLEX/IF_MODE_HALF_DUPLEX in 4/5 ==================== Signed-off-by: -
Ioana Ciornei authored
Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Add a Lynx PCS module which exposes the necessary operations to drive the PCS using phylink. The majority of the code is extracted from the Felix DSA driver, which will be also modified in a later patch, and exposed as a separate module for code reusability purposes. As such, this aims at feature and bug parity with the existing Felix DSA driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS module since these were also supported by Felix. The module can only be enabled by the drivers in need and not user selectable. Signed-off-by:
-
Ioana Ciornei authored
Add the locked variant of the clause 45 mdiobus write accessor - mdiobus_c45_write(). Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Ioana Ciornei authored
The same link partner advertisement word is used for both QSGMII and SGMII, thus treat both interface modes using the same phylink_decode_sgmii_word() function. Signed-off-by:
-
Ioana Ciornei authored
With the new addition of the USXGMII link partner ability constants we can now introduce a phylink helper that decodes the USXGMII word and populates the appropriate fields in the phylink_link_state structure based on them. Signed-off-by:
-
YueHaibing authored
Add missing MODULE_DESCRIPTION. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
There is no caller in tree. Signed-off-by:
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by:
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by:
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by:
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by:
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by:
-
Miaohe Lin authored
This is a pure codestyle cleanup patch. No functional change intended. Signed-off-by:
-
Miaohe Lin authored
What 0xFFFF means here is actually the max mtu of a ip packet. Use help macro IP_MAX_MTU here. Signed-off-by:
-
Grygorii Strashko authored
The new bit TX_GENF_CLR_EN has been added in AM65x SR2.0 to fix i2083 errata, which can be just set unconditionally for all SoCs. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: clean up some W=1 build warnings A collection of minor fixes to issues flagged up by W=1. After this series, the only remaining warnings in the sfc driver are some 'member missing in kerneldoc' warnings from ptp.c. Tested by building on x86_64 and running 'ethtool -p' on an EF10 NIC; there was no error, but I couldn't observe the actual LED as I'm working remotely. [ Incidentally, ethtool_phys_id()'s behaviour on an error return looks strange — if I'm reading it right, it will break out of the inner loop but not the outer one, and eventually return the rc from the last run of the inner loop. Is this intended? ] ==================== Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Edward Cree authored
W=1 warnings indicated that 'rc' was unused in efx_mcdi_set_id_led(); change the function to return int instead of void and plumb the rc through the caller efx_ethtool_phys_id(). Since (post-Falcon) all sfc NICs use MCDI for this, there's no point in indirecting through a nic_type method, so remove that and just call efx_mcdi_set_id_led() directly. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Missing 'struct' keyword caused "cannot understand function prototype" warnings. Signed-off-by:
-
Edward Cree authored
Thanks to some past refactor, 'spec' is not actually used in this function; the code using it moved to the callee efx_farch_filter_remove. Remove the variable to fix a W=1 warning. Signed-off-by:
-
Edward Cree authored
Some of these RX-event flags aren't used at all, so remove them. Others are used only #ifdef DEBUG to log a message; suppress the unused-var warnings #ifndef DEBUG with a void cast. Signed-off-by:
-
David S. Miller authored
wenxu says: ==================== Add ip6_fragment in ipv6_stub Add ip6_fragment in ipv6_stub and use it in openvswitch This version add default function eafnosupport_ipv6_fragment ==================== Signed-off-by: -
wenxu authored
Using ipv6_stub->ipv6_fragment to avoid the netfilter dependency Signed-off-by:
wenxu <wenxu@ucloud.cn> Signed-off-by:
-
wenxu authored
Add ipv6_fragment to ipv6_stub to avoid calling netfilter when access ip6_fragment. Signed-off-by:
-
David S. Miller authored
Nicolas Dichtel says: ==================== gtp: minor enhancements The first patch removes a useless rcu lock and the second relax alloc constraints when a PDP context is added. ==================== Signed-off-by: -
Nicolas Dichtel authored
When a PDP context is added, the rtnl lock is held, thus no need to force a GFP_ATOMIC. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
The rtnl lock is taken just the line above, no need to take the rcu also. Fixes: 1788b856 ("gtp: fix use-after-free in gtp_encap_destroy()") Signed-off-by:
-
Russell King authored
If we intend to use PCS operations, mac_pcs_get_state() will not be implemented, so will be NULL. If we also intend to register the PCS operations in mac_prepare() or mac_config(), then this leads to an attempt to call NULL function pointer during phylink_start(). Avoid this, but we must report the link is down. Signed-off-by:
-
David S. Miller authored
Luo bin says: ==================== hinic: add debugfs support add debugfs node for querying sq/rq info and function table ==================== Signed-off-by: -
Luo bin authored
add debugfs node for querying function table, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/func_table/valid Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
add debugfs node for querying rq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/RQs/0x0/rq_hw_pi Signed-off-by:
-
Luo bin authored
add debugfs node for querying sq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/SQs/0x0/sq_pi Signed-off-by:
-
Johannes Berg authored
In the policy export for binary attributes I erroneously used a != NLA_VALIDATE_NONE comparison instead of checking for the two possible values, which meant that if a validation function pointer ended up aliasing the min/max as negatives, we'd hit a warning in nla_get_range_unsigned(). Fix this to correctly check for only the two types that should be handled here, i.e. range with or without warn-too-long. Reported-by: syzbot+353df1490da781637624@syzkaller.appspotmail.com Fixes: 8aa26c57 ("netlink: make NLA_BINARY validation more flexible") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
- 28 Aug, 2020 5 commits
-
-
Alex Dewar authored
Commit d3b990b7 ("netlabel: fix problems with mapping removal") added a check to return an error if ret_val != 0, before ret_val is later used in a log message. Now it will unconditionally print "... res=1". So just drop the check. Addresses-Coverity: ("Dead code") Fixes: d3b990b7 ("netlabel: fix problems with mapping removal") Signed-off-by:
Alex Dewar <alex.dewar90@gmail.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic memory usage rework Previous review comments have suggested [1],[2] that this driver needs to rework how queue resources are managed and reconfigured so that we don't do a full driver reset and to better handle potential allocation failures. This patchset is intended to address those comments. The first few patches clean some general issues and simplify some of the memory structures. The last 4 patches specifically address queue parameter changes without a full ionic_stop()/ionic_open(). [1] https://lore.kernel.org/netdev/20200706103305.182bd727@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [2] https://lore.kernel.org/netdev/20200724.194417.2151242753657227232.davem@davemloft.net/ v3: use PTR_ALIGN without typecast fix up Neel's attribution v2: use PTR_ALIGN recovery if netif_set_real_num_tx/rx_queues fails less racy queue bring up after reconfig common-ize the reconfig queue stop and start ==================== Signed-off-by:
-
Shannon Nelson authored
Convert tx_timeout handler to not do the full reset. As this was the last user of ionic_reset_queues(), we can drop it. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Add to our new ionic_reconfigure_queues() to also be able to change the number of queues in use, and to change the queue interrupt layout between split and combined. Signed-off-by:
-
Shannon Nelson authored
The original way of changing ring length was to completely tear down the lif's queue structure and then rebuild it, while running the risk of allocations that might fail in the middle and leave us with a broken driver. Instead, we can set up all the new queue and descriptor allocations first, then swap them out and delete the old allocations. If the new allocations fail, we report the error, stay with the old setup and continue running. This gives us a safer path, and a smaller window of time where we're not processing traffic. Signed-off-by:
-
