It can cause
to fail with
modprobe: FATAL: Module <module> is builtin.

RHBZ: 1767094
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

During reconnecting, the transport may have already been destroyed and is in
the process being reconnected. In this case, return -EAGAIN to not fail and
to retry this I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

It's not necessary to queue invalidated memory registration to work queue, as
all we need to do is to unmap the SG and make it usable again. This can save
CPU cycles in normal data paths as memory registration errors are rare and
normally only happens during reconnection.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Helps distinguish between an interrupted close and a truly
unmatched open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.

Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.

Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.

Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.

Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d79 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

If Close command is interrupted before sending a request
to the server the client ends up leaking an open file
handle. This wastes server resources and can potentially
block applications that try to remove the file or any
directory containing this file.

Fix this by putting the close command into a worker queue,
so another thread retries it later.

Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently the client translates O_SYNC and O_DIRECT flags
into corresponding SMB create options when openning a file.
The problem is that on reconnect when the file is being
re-opened the client doesn't set those flags and it causes
a server to reject re-open requests because create options
don't match. The latter means that any subsequent system
call against that open file fail until a share is re-mounted.

Fix this by properly setting SMB create options when
re-openning files after reconnects.

Fixes: 1013e760: ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The smb2/smb3 message checking code was logging to dmesg when mounting
with encryption ("seal") for compounded SMB3 requests.  When encrypted
the whole frame (including potentially multiple compounds) is read
so the length field is longer than in the case of non-encrypted
case (where length field will match the the calculated length for
the particular SMB3 request in the compound being validated).

Avoids the warning on mount (with "seal"):

   "srv rsp padded more than expected. Length 384 not ..."
Signed-off-by: Steve French <stfrench@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Return directly after a call of the function "build_path_from_dentry"
failed at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

Move the same error code assignments so that such exception handling
can be better reused at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

Generated by: scripts/coccinelle/api/memdup_user.cocci

Fixes: f5b05d62 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

The transport should return this error so the upper layer will reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Log these activities to help production support.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

While it's not friendly to fail user processes that issue more iovs
than we support, at least we should return the correct error code so the
user process gets a chance to retry with smaller number of iovs.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

On re-send, there might be a reconnect and all prevoius memory registrations
need to be invalidated and deregistered.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

On reconnect, the transport data structure is NULL and its information is not
available.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Fixes gcc '-Wunused-but-set-variable' warning:

fs/cifs/file.c: In function 'cifs_flock':
fs/cifs/file.c:1704:8: warning:
 variable 'netfid' set but not used [-Wunused-but-set-variable]

fs/cifs/file.c:1702:24: warning:
 variable 'cinode' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The flock system call locks the whole file rather than a byte
range and so is currently emulated by various other file systems
by simply sending a byte range lock for the whole file.
Add flock handling for cifs.ko in similar way.

xfstest generic/504 passes with this as well
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

fs/cifs/cifsacl.c:43:30: warning:
 sid_user defined but not used [-Wunused-const-variable=]

It is never used, so remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Smatch gets confused because we sometimes refer to "server->srv_mutex" and
sometimes to "sess->server->srv_mutex".  They refer to the same lock so
let's just make this consistent.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull cramfs fix from Al Viro:
 "Regression fix, fallen through the cracks"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.

Fixes: 74f78fc5 ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull last minute virtio bugfixes from Michael Tsirkin:
 "Minor bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix shrinker count
  virtio_balloon: fix shrinker scan number of pages
  virtio_console: allocate inbufs in add_port() only if it is needed
  virtio_ring: fix return code on DMA mapping fails

Pull input fix from Dmitry Torokhov:
 "Just a single revert as RMI mode should not have been enabled for this
  model [yet?]"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.

Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.

Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull networking fixes from David Miller:

 1) Validate tunnel options length in act_tunnel_key, from Xin Long.

 2) Fix DMA sync bug in gve driver, from Adi Suresh.

 3) TSO kills performance on some r8169 chips due to HW issues, disable
    by default in that case, from Corinna Vinschen.

 4) Fix clock disable mismatch in fec driver, from Chubong Yuan.

 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.

 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.

 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.

 8) Fix SKB extension memory leak, from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  r8152: avoid to call napi_disable twice
  MAINTAINERS: Add myself as maintainer of virtio-vsock
  udp: drop skb extensions before marking skb stateless
  net: rtnetlink: prevent underflows in do_setvfinfo()
  can: m_can_platform: remove unnecessary m_can_class_resume() call
  can: m_can_platform: set net_device structure as driver data
  hv_netvsc: Fix send_table offset in case of a host bug
  hv_netvsc: Fix offset usage in netvsc_send_table()
  net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
  sfc: Only cancel the PPS workqueue if it exists
  nfc: port100: handle command failure cleanly
  net-sysfs: fix netdev_queue_add_kobject() breakage
  r8152: Re-order napi_disable in rtl8152_close
  net: qca_spi: Move reset_count to struct qcaspi
  net: qca_spi: fix receive buffer size check
  net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
  Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
  net/mlxfw: Verify FSM error code translation doesn't exceed array size
  net/mlx5: Update the list of the PCI supported devices
  net/mlx5: Fix auto group size calculation
  ...

By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.

Commit b9b1f8d5 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:

 $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
 dd: error writing 'foo': File too large

Set s_maxbytes to MAX_LFS_FILESIZE.

Fixes: b9b1f8d5 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC.  Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.

Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.

Fixes: 35dbfba3 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call napi_disable() twice would cause dead lock. There are three situations
may result in the issue.

1. rtl8152_pre_reset() and set_carrier() are run at the same time.
2. Call rtl8152_set_tunable() after rtl8152_close().
3. Call rtl8152_set_ringparam() after rtl8152_close().

For #1, use the same solution as commit 84811412 ("r8152: Re-order
napi_disable in rtl8152_close"). For #2 and #3, add checking the flag
of IFF_UP and using napi_disable/napi_enable during mutex.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "Three fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()
  mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()
  Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"

Merge tag 'linux-can-fixes-for-5.4-20191122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-11-22

this is a pull request of 2 patches for net/master, if possible for the
current release cycle. Otherwise these patches should hit v5.4 via the
stable tree.

Both patches of this pull request target the m_can driver. Pankaj Sharma
fixes the fallout in the m_can_platform part, which appeared with the
introduction of the m_can platform framework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since I'm actively working on vsock and virtio/vhost transports,
Stefan suggested to help him to maintain it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free
assumes all skb head state has been dropped already.

This will leak the extension memory in case the skb has extensions other
than the ipsec secpath, e.g. bridge nf data.

To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have
extensions or if the extension space can be free'd.

Fixes: 895b5c9f ("netfilter: drop bridge nf reset from nf_reset")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Byron Stanoszek <gandalf@winds.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "ivm->vf" variable is a u32, but the problem is that a number of
drivers cast it to an int and then forget to check for negatives.  An
example of this is in the cxgb4 driver.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
  2890  static int cxgb4_mgmt_get_vf_config(struct net_device *dev,
  2891                                      int vf, struct ifla_vf_info *ivi)
                                            ^^^^^^
  2892  {
  2893          struct port_info *pi = netdev_priv(dev);
  2894          struct adapter *adap = pi->adapter;
  2895          struct vf_info *vfinfo;
  2896
  2897          if (vf >= adap->num_vfs)
                    ^^^^^^^^^^^^^^^^^^^
  2898                  return -EINVAL;
  2899          vfinfo = &adap->vfinfo[vf];
                ^^^^^^^^^^^^^^^^^^^^^^^^^^

There are 48 functions affected.

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646'
drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646'
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management regression fix from Rafael Wysocki:
 "Fix problems with switching cpufreq drivers on some x86 systems with
  ACPI (and with changing the operation modes of the intel_pstate driver
  on those systems) introduced by recent changes related to the
  management of frequency limits in cpufreq"

* tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: QoS: Invalidate frequency QoS requests after removal

Pull drm fixes from Dave Airlie:
 "Two sets of fixes in here, one for amdgpu, and one for i915.

  The amdgpu ones are pretty small, i915's CI system seems to have a few
  problems in the last week or so, there is one major regression fix for
  fb_mmap, but there are a bunch of other issues fixed in there as well,
  oops, screen flashes and rcu related.

  amdgpu:
   - Remove experimental flag for navi14
   - Fix confusing power message failures on older VI parts
   - Hang fix for gfxoff when using the read register interface
   - Two stability regression fixes for Raven

  i915:
   - Fix kernel oops on dumb_create ioctl on no crtc situation
   - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
   - Fix unity of the frequencies reported on PMU
   - Fix kernel oops on set_page_dirty using better locks around it
   - Protect the request pointer with RCU to prevent it being freed
     while we might need still
   - Make pool objects read-only
   - Restore physical addresses for fb_map to avoid corrupted page
     table"

* tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/fbdev: Restore physical addresses for fb_mmap()
  Revert "drm/amd/display: enable S/G for RAVEN chip"
  drm/amdgpu: disable gfxoff on original raven
  drm/amdgpu: disable gfxoff when using register read interface
  drm/amd/powerplay: correct fine grained dpm force level setting
  drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs
  drm/amdgpu: remove experimental flag for Navi14
  drm/i915: make pool objects read-only
  drm/i915: Protect request peeking with RCU
  drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
  drm/i915/pmu: "Frequency" is reported as accumulated cycles
  drm/i915: Preload LUTs if the hw isn't currently using them
  drm/i915: Don't oops in dumb_create ioctl if we have no crtcs

It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().

  WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150

  Call Trace:
   remove_all_stable_nodes+0x12b/0x330
   run_store+0x4ef/0x7b0
   kernfs_fop_write+0x200/0x420
   vfs_write+0x154/0x450
   ksys_write+0xf9/0x1d0
   do_syscall_64+0x99/0x510
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Remove the warning as there is nothing scary going on.

Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes: cbf86cfe ("ksm: remove old stable nodes more thoroughly")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>