- 19 Aug, 2017 1 commit
-
-
Chen-Yu Tsai authored
The BPI-M3 is an Allwinner A83T based SBC in the Bananapi/Bpi family. It is roughly the same form factor as the BPI-M1+, with roughly the same peripherals and connectors: - 2GB LPDDR3 DRAM - 8GB eMMC - Micro-SD card slot - HDMI output - Headset (stereo + mic) jack - Onboard mic - Gigabit Ethernet with RTL8211E transceiver - Ampak AP6212 WiFi + BT - USB OTG connector - USB-to-SATA bridge connected through a USB 2.0 hub - Consumer IR receiver - MIPI DSI LCD panel connector - Camera interface (parallel and MIPI CSI) connector - 3 LEDs (Red, Green, Blue), of which 2 are controllable (GB) - Raspberry Pi 2 compatible GPIO header Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
- 18 Aug, 2017 4 commits
-
-
Chen-Yu Tsai authored
The h8homlet board has the A83T's standard USB 1.1/2.0 host pair routed to a USB host port on the board. The other USB host port is routed to USB OTG controller. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The Cubietruck-plus has a GL830 USB-to-SATA bridge connected to EHCI0, and a USB3503 HSIC USB 2.0 hub connected to EHCI1. The USB3503's I2C control interface is not connected. This patch enables both EHCI controllers, adds a device node for the USB hub, and includes sunxi-common-regulators.dtsi for the VBUS regulators. The existing reg_vcc3v3 is dropped as it is also available in the set of common regulators. Other unused regulators are disabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The USB OTG controller found on the A83T is compatible with the one found on the A33. Add a device node for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The A83T has 3 USB PHYs, 1 for USB OTG, 1 for standard USB 2.0, 1 for USB HSIC. EHCI0/OHCI0 are the standard USB host pair, while EHCI1 is the host controller for HSIC. OTG is not added yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 08 Aug, 2017 5 commits
-
-
Chen-Yu Tsai authored
The AXP813/AXP818 PMICs used with the A83T/H8 SoCs are actually 2 dies in one package sharing the serial bus (I2C/RSB) pins. One die is the actual PMIC. The other is an AC100 codec / RTC combo chip. This patch adds the device nodes for the AC100 chip to the h8homlet-v2 device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP813/AXP818 PMICs used with the A83T/H8 SoCs are actually 2 dies in one package sharing the serial bus (I2C/RSB) pins. One die is the actual PMIC. The other is an AC100 codec / RTC combo chip. This patch enables the RSB controller and adds a device node for the PMIC die to the h8homlet-v2 device tree. Since the AXP813 and AXP818 are virtually identical, this patch uses the compatible string for the former as a fallback. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP813/AXP818 PMICs used with the A83T/H8 SoCs are actually 2 dies in one package sharing the serial bus (I2C/RSB) pins. One die is the actual PMIC. The other is an AC100 codec / RTC combo chip. This patch adds the device nodes for the AC100 chip to the Cubietruck Plus device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP813/AXP818 PMICs used with the A83T/H8 SoCs are actually 2 dies in one package sharing the serial bus (I2C/RSB) pins. One die is the actual PMIC. The other is an AC100 codec / RTC combo chip. This patch enables the RSB controller and adds a device node for the PMIC die to the Cubietruck Plus device tree. Since the AXP813 and AXP818 are virtually identical, this patch uses the compatible string for the former as a fallback. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The A83T has an RSB controller for talking to the PMIC and audio codec. Add a device node for it. Since there is only one usable pinmux setting, for it, add that as well. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 05 Aug, 2017 11 commits
-
-
Chen-Yu Tsai authored
The H8 homlet has a micro-SD card slot connected to mmc0, and onboard eMMC from FORESEE, connected to mmc2. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Now that we support the MMC controllers on the A83T SoC, we can enable them on some boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
mmc2 can support 8-bit eMMC chips, with a dedicated reset line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The A83T has 3 MMC controllers. The third one is a bit special, as it supports a wider 8-bit bus, and a "new timing mode". Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Marcus Cooper authored
The dwmac-sun8i hardware is present on the Beelink X2. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Fixed typo in commit subject] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Marcus Cooper authored
This STB has a type A socket which acts as OTG. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Maxime Ripard authored
The Bananapi M2-Magic is a board with an A33, a USB host and USB OTG connectors, and 8GB eMMC, an AP6212 WiFi/Bluetooth chip and connectors for DSI, CSI and GPIOs. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix case] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Alexander Syring authored
The Cubietruck has an AXP209 PMIC with battery connector. This enables the battery power supply subnode. Signed-off-by: Alexander Syring <alex@asyring.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The R_INTC interrupt controller handles the NMI interrupt pin for the SoC. While there is no documentation or code from the vendor for this device on the A83T, existing mainline kernel drivers and bindings show this to be similar to the old Allwinner interrupt controller found on the A10 SoC, but with only the NMI interrupt wired. Register poking experiments confirm this. The device seems to be the same across all recent Allwinner SoCs, apart from the A20 and A80, which have a separate set of registers to handle the NMI interrupt. We already have a set of bindings supporting this on the A31. Add a device node for it, with an SoC specific compatible. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
We introduced a new compatible for the NMI or R_INTC interrupt controller. This new compatible has the register region aligned to the boundary listed in the SoC's memory map. This patch converts the NMI/R_INTC node to using the new compatible, and fixes up the register region and device node name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
We introduced a new compatible for the NMI or R_INTC interrupt controller. This new compatible has the register region aligned to the boundary listed in the SoC's memory map. This patch converts the NMI/R_INTC node to using the new compatible, and fixes up the register region and device node name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 27 Jul, 2017 3 commits
-
-
Chen-Yu Tsai authored
Now that the CCU device tree binding headers have been merged, we can use the properly named macros in the device tree, instead of raw numbers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
The datasheet said that emac register size is 0x10000 not 0x100 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Fixed commit subject prefix] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Corentin Labbe authored
The datasheet said that emac register size is 0x10000 not 0x104 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Fixed commit subject prefix] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
- 15 Jul, 2017 16 commits
-
-
Linus Torvalds authored
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ...
-
Sebastian Andrzej Siewior authored
Avoid the READ_ONCE in commit 4a072c71 ("random: silence compiler warnings and fix race") if we can leave the function after arch_get_random_XXX(). Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull XFS fixes from Darrick Wong: "Largely debugging and regression fixes. - Add some locking assertions for the _ilock helpers. - Revert the XFS_QMOPT_NOLOCK patch; after discussion with hch the online fsck patch that would have needed it has been redesigned and no longer needs it. - Fix behavioral regression of SEEK_HOLE/DATA with negative offsets to match 4.12-era XFS behavior" * tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: in iomap seek_{hole,data}, return -ENXIO for negative offsets Revert "xfs: grab dquots without taking the ilock" xfs: assert locking precondition in xfs_readlink_bmap_ilocked xfs: assert locking precondіtion in xfs_attr_list_int_ilocked xfs: fixup xfs_attr_get_ilocked
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "We've identified and fixed a silent corruption (introduced by code in the first pull), a fixup after the blk_status_t merge and two fixes to incremental send that Filipe has been hunting for some time" * 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix unexpected return value of bio_readpage_error btrfs: btrfs_create_repair_bio never fails, skip error handling btrfs: cloned bios must not be iterated by bio_for_each_segment_all Btrfs: fix write corruption due to bio cloning on raid5/6 Btrfs: incremental send, fix invalid memory access Btrfs: incremental send, fix invalid path for link commands
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull a few more input updates from Dmitry Torokhov: - multi-touch handling for Xen - fix for long-standing bug causing crashes in i8042 on boot - change to gpio_keys to better handle key presses during system state transition * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix crash at boot time Input: gpio_keys - handle the missing key press event in resume phase Input: xen-kbdfront - add multi-touch support
-