As reported by Manfred Schlaegl here

   http://marc.info/?l=linux-netdev&m=143482089824232&w=2

commit 514ac99c "can: fix multiple delivery of a single CAN frame for
overlapping CAN filters" requires the skb->tstamp to be set to check for
identical CAN skbs.

As net timestamping is influenced by several players (netstamp_needed and
netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to
CAN frame loss.

As skb timestamping became now mandatory for CAN related skbs this patch
makes sure that received CAN skbs always have a proper timestamp set.
Maybe there's a better solution in the future but this patch fixes the
CAN frame loss so far.
Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fix an allmodconfig compilation failer on microblaze due to big endian
architectures being apparently unsupported by the NetJet code:
  drivers/isdn/hisax/nj_s.c: In function 'setup_netjet_s':
  drivers/isdn/hisax/nj_s.c:265:2:
      error: #error "not running on big endian machines now"

Modify the relevant Kconfig such that the NetJet code is not built on
microblaze anymore.

Note that endianess on microblaze is not determined through Kconfig,
but by means of a compiler provided CPP macro, namely __MICROBLAZEEL__.
However, gcc defaults to big endianess on that platform.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lockless lookups can return entry that is unlinked.
Sometimes they get reference before last neigh_cleanup_and_release,
sometimes they do not need reference. Later, any
modification attempts may result in the following problems:

1. entry is not destroyed immediately because neigh_update
can start the timer for dead entry, eg. on change to NUD_REACHABLE
state. As result, entry lives for some time but is invisible
and out of control.

2. __neigh_event_send can run in parallel with neigh_destroy
while refcnt=0 but if timer is started and expired refcnt can
reach 0 for second time leading to second neigh_destroy and
possible crash.

Thanks to Eric Dumazet and Ying Xue for their work and analyze
on the __neigh_event_send change.

Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
Fixes: a263b309 ("ipv4: Make neigh lookups directly in output packet path.")
Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to tell compiler it must not read f->num_members multiple
times. Otherwise testing if num is not zero is flaky, and we could
attempt an invalid divide by 0 in fanout_demux_cpu()

Note bug was present in packet_rcv_fanout_hash() and
packet_rcv_fanout_lb() but final 3.1 had a simple location
after commit 95ec3eb4 ("packet: Add 'cpu' fanout policy.")

Fixes: dc99f600 ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the ->set() spinlocks were removed br_stp_set_bridge_priority
was left running without any protection when used via sysfs. It can
race with port add/del and could result in use-after-free cases and
corrupted lists. Tested by running port add/del in a loop with stp
enabled while setting priority in a loop, crashes are easily
reproducible.
The spinlocks around sysfs ->set() were removed in commit:
14f98f25 ("bridge: range check STP parameters")
There's also a race condition in the netlink priority support that is
fixed by this change, but it was introduced recently and the fixes tag
covers it, just in case it's needed the commit is:
af615762 ("bridge: add ageing_time, stp_state, priority over netlink")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: 14f98f25 ("bridge: range check STP parameters")
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to firmware bug, under VPI configuration when port1 = IB and
port2 = Eth, Granular QoS per VF isn't working properly. More over,
the whole QP0/QP1 Para-Virtualization in the mlx4 IB driver is
broken on that config.

Hence, we must disable Granular QoS per VF under that configuration
till a fix is introduced. Once that happens, a new device capability
will be used to mark the feature support on that specific configuration.
Reported-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

->auto_asconf_splist is per namespace and mangled by functions like
sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization.

Also, the call to inet_sk_copy_descendant() was backuping
->auto_asconf_list through the copy but was not honoring
->do_auto_asconf, which could lead to list corruption if it was
different between both sockets.

This commit thus fixes the list handling by using ->addr_wq_lock
spinlock to protect the list. A special handling is done upon socket
creation and destruction for that. Error handlig on sctp_init_sock()
will never return an error after having initialized asconf, so
sctp_destroy_sock() can be called without addrq_wq_lock. The lock now
will be take on sctp_close_sock(), before locking the socket, so we
don't do it in inverse order compared to sctp_addr_wq_timeout_handler().

Instead of taking the lock on sctp_sock_migrate() for copying and
restoring the list values, it's preferred to avoid rewritting it by
implementing sctp_copy_descendant().

Issue was found with a test application that kept flipping sysctl
default_auto_asconf on and off, but one could trigger it by issuing
simultaneous setsockopt() calls on multiple sockets or by
creating/destroying sockets fast enough. This is only triggerable
locally.

Fixes: 9f7d653b ("sctp: Add Auto-ASCONF support (core).")
Reported-by: Ji Jianwen <jiji@redhat.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
    from Johannes Berg.

 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
    regressions.

 3) Endless loops can be created in bridge port lists, fix from Nikolay
    Aleksandrov.

 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
    sk_clear_memalloc, it is a legal situation during swap deactivation.
    Fix from Mel Gorman.

 5) Fix order of disabling interrupts and unlocking NAPI in enic driver
    to avoid a race.  From Govindarajulu Varadarajan.

 6) High and low register writes are swapped when programming the start
    of periodic output in igb driver.  From Richard Cochran.

 7) Fix device rename handling in mpls stack, from Robert Shearman.

 8) Do not trigger compaction synchronously when optimistically trying
    to allocate an order 3 page in alloc_skb_with_frags() and
    skb_page_frag_refill().  From Shaohua Li.

 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
  sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
  net: don't wait for order-3 page allocation
  mpls: handle device renames for per-device sysctls
  net: igb: fix the start time for periodic output signals
  enic: fix memory leak in rq_clean
  enic: check return value for stat dump
  enic: unlock napi busy poll before unmasking intr
  net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
  bridge: fix multicast router rlist endless loop
  tipc: disconnect socket directly after probe failure
  Revert "ipv6: Fix protocol resubmission"
  cfg80211: wext: clear sinfo struct before calling driver

This patch fix URL (http to https) for wiki.wireshark.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can ask to authenticate DATA chunks and we can send DATA
chunks on the same packet as COOKIE_ECHO, but if you try to combine
both, the DATA chunk will be sent unauthenticated and peer won't accept
it, leading to a communication failure.

This happens because even though the data was queued after it was
requested to authenticate DATA chunks, it was also queued before we
could know that remote peer can handle authenticating, so
sctp_auth_send_cid() returns false.

The fix is whenever we set up an active key, re-check send queue for
chunks that now should be authenticated. As a result, such packet will
now contain COOKIE_ECHO + AUTH + DATA chunks, in that order.
Reported-by: Liu Wei <weliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fixes from Jens Axboe:
 "Remember about a week ago when I sent the last pull request for 4.1?
  Well, I lied.  Now, I don't want to shift the blame, but Dan, Ming,
  and Richard made a liar out of me.

  Here are three small patches that should go into 4.1.  More
  specifically, this pull request contains:

   - A Kconfig dependency for the pmem block driver, so it can't be
     selected if HAS_IOMEM isn't availble.  From Richard Weinberger.

   - A fix for genhd, making the ext_devt_lock softirq safe.  This makes
     lockdep happier, since we also end up grabbing this lock on release
     off the softirq path.  From Dan Williams.

   - A blk-mq software queue release fix from Ming Lei.

  Last two are headed to stable, first fixes an issue introduced in this
  cycle"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: pmem: Add dependency on HAS_IOMEM
  block: fix ext_dev_lock lockdep report
  blk-mq: free hctx->ctxs in queue's release handler

Pull three more md fixes from Neil Brown:
 "Hasn't been a good cycle for md has it :-(

  The main issue fixed here is a rare race which can result in two
  reshape threads running at once, which doesn't end well.

  Also a minor issue with a write to a sysfs file returning the wrong
  value.  Backports to 4.0-stable are indicated"

* tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md:
  md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
  md: Close race when setting 'action' to 'idle'.
  md: don't return 0 from array_state_store

Pull VT-d hardware workarounds from David Woodhouse:
 "This contains a workaround for hardware issues which I *thought* were
  never going to be seen on production hardware.  I'm glad I checked
  that before the 4.1 release...

  Firstly, PASID support is so broken on existing chips that we're just
  going to declare the old capability bit 28 as 'reserved' and change
  the VT-d spec to move PASID support to another bit.  So any existing
  hardware doesn't support SVM; it only sets that (now) meaningless bit
  28.

  That patch *wasn't* imperative for 4.1 because we don't have PASID
  support yet.  But *even* the extended context tables are broken — if
  you just enable the wider tables and use none of the new bits in them,
  which is precisely what 4.1 does, you find that translations don't
  work.  It's this problem which I thought was caught in time to be
  fixed before production, but wasn't.

  To avoid triggering this issue, we now *only* enable the extended
  context tables on hardware which also advertises "we have PASID
  support and we actually tested it this time" with the new PASID
  feature bit.

  In addition, I've added an 'intel_iommu=ecs_off' command line
  parameter to allow us to disable it manually if we need to"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Only enable extended context tables if PASID is supported
  iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register

Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.

For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.

The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606 ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.

So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.

The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.

In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished.  However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared.  This
can lean to multiple reshapes running at the same time, which isn't
good.

To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NeilBrown  <neilb@suse.de>

Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.

While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts).  When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared.  This allows two threads to start
which leads to confusion.

So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)

Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.

So use 'len' if 'err' is zero.

Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)

Pull drm fixes from Dave Airlie:
 "i915 and radeon fixes:

  i915:
      fix for connector oops regression
      DDC probing fix

  radeon:
      two radeon reverts, along with a freeze workaround and a fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit 5640f768
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.

This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.

alloc_skb_with_frags is the same.

The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.

V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer

Cc: Eric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix for the regression Linus called out, and another for probing
dongles.

* tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

Two regression reverts, and two fixes, one for a dpm boot freeze.

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.

If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:

sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
 [<ffffffff81566aaf>] ? dump_stack+0x40/0x50
 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
 [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
 [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0
 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75

Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.

Fixes: 37bde799 ("mpls: Per-device enabling of packet input")
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register.  Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.

This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not all architectures have io memory.

Fixes:
drivers/block/pmem.c: In function ‘pmem_alloc’:
drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
  ^
drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
                  ^
drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(pmem->virt_addr);
  ^
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ring buffer benchmark buglet fix from Steven Rostedt:
 "Wang Long fixed a minor bug in the module parameter for the ring
  buffer benchmark, where the produce_fifo was being ignored and the
  producer thread's priority was being set with the consumer_fifo
  parameter"

* tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer-benchmark: Fix the wrong sched_priority of producer

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092 are
candidates for -stable.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: <stable@vger.kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Some error paths didn't unreserve the BO. This resulted in a deadlock
down the road on the next attempt to reserve the (still reserved) BO.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 7fe04d6f.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

This reverts commit a10f0df0.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com

Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When incoming packet qualifies for rx_copybreak, we copy the data to newly
allocated skb. We do not free/unmap the original buffer. At this point driver
assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for
buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means
buffer can be re-used.

When vnic_rq_clean() is called for freeing all rq buffers, and if the
rx_copybreak reused buffer falls outside the used desc, we do not free the
buffer. The following trace is observer when dma-debug is enabled.

Fix is to walk through complete ring and clean if buffer is present.

[   40.555386] ------------[ cut here ]------------
[   40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0()
[   40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4]
               One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single]
[   40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2
[   40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118
[   40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014
[   40.555471]  0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0
[   40.555474]  0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a
[   40.555477]  ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650
[   40.555480] Call Trace:
[   40.555488]  [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b
[   40.555492]  [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0
[   40.555494]  [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70
[   40.555498]  [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0
[   40.555503]  [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80
[   40.555506]  [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70
[   40.555510]  [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20
[   40.555514]  [<ffffffff813f8066>] __device_release_driver+0xf6/0x120
[   40.555518]  [<ffffffff813f8b08>] driver_detach+0xc8/0xd0
[   40.555523]  [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0
[   40.555527]  [<ffffffff813f93a0>] driver_unregister+0x30/0x70
[   40.555534]  [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0
[   40.555542]  [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic]
[   40.555547]  [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280
[   40.555551]  [<ffffffff811e284e>] ? ____fput+0xe/0x10
[   40.555554]  [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0
[   40.555558]  [<ffffffff815930ee>] system_call_fastpath+0x12/0x71
[   40.555561] ---[ end trace 4988cadc77c2b236 ]---
[   40.555562] Mapped at:
[   40.555563]  [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150
[   40.555566]  [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic]
[   40.555570]  [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic]
[   40.555574]  [<ffffffff8148d50e>] __dev_open+0xce/0x150
[   40.555579]  [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do not check the return value of enic_dev_stats_dump(). If allocation
fails, we will hit NULL pointer reference.

Return only if memory allocation fails. For other failures, we return the
previously recorded values.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi().
In this window if an irq occurs and napi is scheduled on different cpu, it tries
to acquire enic_poll_lock_napi() and hits the following WARN_ON message.

Fix is to unlock napi_poll before unmasking the interrupt.

[  781.121746] ------------[ cut here ]------------
[  781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]()
[  781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2
[  781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024e-dirty #106
[  781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014
[  781.122252]  0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8
[  781.122286]  0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa
[  781.122319]  ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000
[  781.122352] Call Trace:
[  781.122364]  <IRQ>  [<ffffffff81583fe8>] dump_stack+0x4f/0x7b
[  781.122399]  [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0
[  781.122425]  [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20
[  781.122455]  [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic]
[  781.122487]  [<ffffffff8148525a>] net_rx_action+0x22a/0x370
[  781.122512]  [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0
[  781.122537]  [<ffffffff8107f06e>] irq_exit+0x7e/0xa0
[  781.122560]  [<ffffffff8158c424>] do_IRQ+0x64/0x100
[  781.122582]  [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e
[  781.122605]  <EOI>  [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480
[  781.122638]  [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480
[  781.122667]  [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0
[  781.122698]  [<ffffffff81050ab6>] start_secondary+0x196/0x1e0
[  781.122723] ---[ end trace cec2e9dd3af7b9db ]---
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Layton reported the following;

 [   74.232485] ------------[ cut here ]------------
 [   74.233354] WARNING: CPU: 2 PID: 754 at net/core/sock.c:364 sk_clear_memalloc+0x51/0x80()
 [   74.234790] Modules linked in: cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xfs libcrc32c snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device nfsd snd_pcm snd_timer snd e1000 ppdev parport_pc joydev parport pvpanic soundcore floppy serio_raw i2c_piix4 pcspkr nfs_acl lockd virtio_balloon acpi_cpufreq auth_rpcgss grace sunrpc qxl drm_kms_helper ttm drm virtio_console virtio_blk virtio_pci ata_generic virtio_ring pata_acpi virtio
 [   74.243599] CPU: 2 PID: 754 Comm: swapoff Not tainted 4.1.0-rc6+ #5
 [   74.244635] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 [   74.245546]  0000000000000000 0000000079e69e31 ffff8800d066bde8 ffffffff8179263d
 [   74.246786]  0000000000000000 0000000000000000 ffff8800d066be28 ffffffff8109e6fa
 [   74.248175]  0000000000000000 ffff880118d48000 ffff8800d58f5c08 ffff880036e380a8
 [   74.249483] Call Trace:
 [   74.249872]  [<ffffffff8179263d>] dump_stack+0x45/0x57
 [   74.250703]  [<ffffffff8109e6fa>] warn_slowpath_common+0x8a/0xc0
 [   74.251655]  [<ffffffff8109e82a>] warn_slowpath_null+0x1a/0x20
 [   74.252585]  [<ffffffff81661241>] sk_clear_memalloc+0x51/0x80
 [   74.253519]  [<ffffffffa0116c72>] xs_disable_swap+0x42/0x80 [sunrpc]
 [   74.254537]  [<ffffffffa01109de>] rpc_clnt_swap_deactivate+0x7e/0xc0 [sunrpc]
 [   74.255610]  [<ffffffffa03e4fd7>] nfs_swap_deactivate+0x27/0x30 [nfs]
 [   74.256582]  [<ffffffff811e99d4>] destroy_swap_extents+0x74/0x80
 [   74.257496]  [<ffffffff811ecb52>] SyS_swapoff+0x222/0x5c0
 [   74.258318]  [<ffffffff81023f27>] ? syscall_trace_leave+0xc7/0x140
 [   74.259253]  [<ffffffff81798dae>] system_call_fastpath+0x12/0x71
 [   74.260158] ---[ end trace 2530722966429f10 ]---

The warning in question was unnecessary but with Jeff's series the rules
are also clearer.  This patch removes the warning and updates the comment
to explain why sk_mem_reclaim() may still be called.

[jlayton: remove if (sk->sk_forward_alloc) conditional. As Leon
          points out that it's not needed.]

Cc: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the addition of sysfs multicast router support if one set
multicast_router to "2" more than once, then the port would be added to
the hlist every time and could end up linking to itself and thus causing an
endless loop for rlist walkers.
So to reproduce just do:
echo 2 > multicast_router; echo 2 > multicast_router;
in a bridge port and let some igmp traffic flow, for me it hangs up
in br_multicast_flood().
Fix this by adding a check in br_multicast_add_router() if the port is
already linked.
The reason this didn't happen before the addition of multicast_router
sysfs entries is because there's a !hlist_unhashed check that prevents
it.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: 0909e117 ("bridge: Add multicast_router sysfs entries")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the TIPC connection timer expires in a probing state, a
self abort message is supposed to be generated and delivered
to the local socket. This is currently broken, and the abort
message is actually sent out to the peer node with invalid
addressing information. This will cause the link to enter
a constant retransmission state and eventually reset.
We fix this by removing the self-abort message creation and
tear down connection immediately instead.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'misc-for-linus-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull misc fixes from Guenter Roeck:
 "There are two patches here.  One fixes a build error affecting the
  blackfin architecture, the other fixes a build error affecting the
  score architecture.

  The score maintainer (Lennox Wu) has a hard time sending you the score
  patch, and the blackfin maintainer (Steven Miao) has been silent since
  -rc1.  Since 4.1 is about to be released, I figured it would be useful
  to get the patches upstream to avoid the related build failures in the
  final release"

* tag 'misc-for-linus-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  score: Fix exception handler label
  blackfin: Fix build error

Merge misc fixes from Andrew Morton:
 "The gcc-4.4.4 workaround has actually been merged into a KVM tree by
  Paolo but it is stuck in linux-next and mainline needs it"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  arch/x86/kvm/mmu.c: work around gcc-4.4.4 bug
  sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings
  zsmalloc: fix a null pointer dereference in destroy_handle_cache()
  mm: memcontrol: fix false-positive VM_BUG_ON() on -rt
  checkpatch: fix "GLOBAL_INITIALISERS" test
  zram: clear disk io accounting when reset zram device
  memcg: do not call reclaim if !__GFP_WAIT
  mm/memory_hotplug.c: set zone->wait_table to null after freeing it

Fix this compile issue with gcc-4.4.4:

   arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write':
   arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer
   arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer
   arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer
   ...

gcc-4.4.4 (at least) has issues when using anonymous unions in
initializers.

Fixes: edc90b7d ("KVM: MMU: fix SMAP virtualization")
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>