- 16 Mar, 2018 7 commits
-
-
Jiri Olsa authored
We are going to calculate tje column width based on the struct c2c_hist_entry data, so making calc_width to work with struct c2c_hist_entry. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-6-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
We are going to display NUMA node information in following patches. For this we need to have physical address data in the sample. Adding --phys-data as a default option for perf c2c record. Signed-off-by:
-
Jiri Olsa authored
Adding mem2node object automated test. The test prepares few artificial nodes - memory maps and verifies the mem2node object returns proper node values to given addresses. Signed-off-by:
-
Jiri Olsa authored
Adding mem2node object to allow the easy lookup of the node for the physical address. It has following interface: int mem2node__init(struct mem2node *map, struct perf_env *env); void mem2node__exit(struct mem2node *map); int mem2node__node(struct mem2node *map, u64 addr); The mem2node__toolsinit initialize object from the perf data file MEM_TOPOLOGY feature data. Following calls to mem2node__node will return node number for given physical address. The mem2node__exit function frees the object. Signed-off-by:
-
Jiri Olsa authored
Forgot to free env's memory nodes, adding needed code to perf_env__exit. Signed-off-by:
-
Mark Rutland authored
When perf_group_dettach() is called on a group leader, it updates each sibling's group_leader field to point to that sibling, effectively upgrading each siblnig to a group leader. After perf_group_detach has completed, the caller may free the leader event. We only remove siblings from the group leader's sibling_list when the leader has a non-empty group_node. This was fine prior to commit: 8343aae6 ("perf/core: Remove perf_event::group_entry") ... as the sibling's sibling_list would be empty. However, now that we use the sibling_list field as both the list head and the list entry, this leaves each sibling with a non-empty sibling list, including the stale leader event. If perf_group_detach() is subsequently called on a sibling, it will appear to be a group leader, and we'll walk the sibling_list, potentially dereferencing these stale events. In 0day testing, this has been observed to result in kernel panics. Let's avoid this by always removing siblings from the sibling list when we promote them to leaders. Fixes: 8343aae6 ("perf/core: Remove perf_event::group_entry") Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: Peter Zijlstra <peterz@infradead.org> Cc: torvalds@linux-foundation.org Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: valery.cherepennikov@intel.com Cc: linux-tip-commits@vger.kernel.org Cc: eranian@google.com Cc: acme@redhat.com Cc: alexander.shishkin@linux.intel.com Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lkml.kernel.org/r/20180316131741.3svgr64yibc6vsid@lakrids.cambridge.arm.com
-
Peter Zijlstra authored
Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae6 ("perf/core: Remove perf_event::group_entry") Reported-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
- 13 Mar, 2018 8 commits
-
-
Milind Chabbi authored
Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT) is created, there is no flexibility to change the breakpoint type (bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The only option is to close the perf event and configure a new breakpoint event. This inflexibility has a significant performance overhead. For example, sampling-based, lightweight performance profilers (and also concurrency bug detection tools), monitor different addresses for a short duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to another address or change the kind of breakpoint (bp_type) from "write" to a "read" or vice-versa or change the length (bp_len) of the address being monitored. The cost of these modifications is prohibitive since it involves unmapping the circular buffer associated with the perf event, closing the perf event, opening another perf event and mmaping another circular buffer. Solution: The new ioctl flag for perf events, PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer to a struct perf_event_attr as an argument to update an old breakpoint event with new address, type, and size. This facility allows retaining a previous mmaped perf events ring buffer and avoids having to close and reopen another perf event. This patch supports only changing PERF_TYPE_BREAKPOINT event type; future implementations can extend this feature. The patch replicates some of its functionality of modify_user_hw_breakpoint() in kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called directly since perf_event_ctx_lock() is already held in _perf_ioctl(). Evidence: Experiments show that the baseline (not able to modify an already created breakpoint) costs an order of magnitude (~10x) more than the suggested optimization (having the ability to dynamically modifying a configured breakpoint via ioctl). When the breakpoints typically do not trap, the speedup due to the suggested optimization is ~10x; even when the breakpoints always trap, the speedup is ~4x due to the suggested optimization. Testing: tests posted at https://github.com/linux-contrib/perf_event_modify_bp demonstrate the performance significance of this patch. Tests also check the functional correctness of the patch. Signed-off-by:
Milind Chabbi <chabbi.milind@gmail.com> [ Using modify_user_hw_breakpoint_check function. ] [ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Jiri Olsa authored
Adding test that: - detects the number of watch/break-points, skip test if any is missing - detects PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl, skip test if it's missing - detects if watchpoints and breakpoints share same slots - create all possible watchpoints on cpu 0 - change one of it to breakpoint - in case wp and bp do not share slots, we create another watchpoint to ensure the slot accounting is correct Signed-off-by: -
Jiri Olsa authored
Move the sample_max_stack check and setup into perf_copy_attr(), so we have all perf_event_attr initial setup in one place and can easily compare attrs in the new ioctl introduced in following change. Suggested-by:
-
Jiri Olsa authored
And rename it to modify_user_hw_breakpoint_check(). We are about to use modify_user_hw_breakpoint_check() for user space breakpoints modification, we must be very strict to check only the fields we can change have changed. As Peter explained: "Suppose someone does: attr = malloc(sizeof(*attr)); // uninitialized memory attr->type = BP; attr->bp_addr = new_addr; attr->bp_type = bp_type; attr->bp_len = bp_len; ioctl(fd, PERF_IOC_MOD_ATTR, &attr); And feeds absolute shite for the rest of the fields. Then we later want to extend IOC_MOD_ATTR to allow changing attr::sample_type but we can't, because that would break the above application." I'm making this check optional because we already export modify_user_hw_breakpoint() and with this check we could break existing users. Suggested-by: -
Jiri Olsa authored
Moving out all the functionality without the events disabling/enabling calls, because we want to call another disabling/enabling functions in following change. Signed-off-by:
-
Jiri Olsa authored
Add the modify_bp_slot() function to keep slot numbers correct when changing the breakpoint type. Using existing __release_bp_slot()/__reserve_bp_slot() call sequence to update the slot counts. Signed-off-by:
-
Jiri Olsa authored
Passing bp_type argument to __reserve_bp_slot() and __release_bp_slot() functions, so we can pass another bp_type than the one defined in bp->attr.bp_type. This will be handy in following change that fixes breakpoint slot counts during its modification. Signed-off-by:
-
Jiri Olsa authored
Pass bp_type directly as a find_slot_idx() argument, so we don't need to have whole event to get the breakpoint slot type. It will be used in following changes. Signed-off-by:
-
- 12 Mar, 2018 10 commits
-
-
leilei.lin authored
There's two problems when installing cgroup events on CPUs: firstly list_update_cgroup_event() only tries to set cpuctx->cgrp for the first event, if that mismatches on @cgrp we'll not try again for later additions. Secondly, when we install a cgroup event into an active context, only issue an event reprogram when the event matches the current cgroup context. This avoids a pointless event reprogramming. Signed-off-by:
leilei.lin <leilei.lin@alibaba-inc.com> [ Improved the changelog and comments. ] Signed-off-by:
-
Peter Zijlstra authored
The event schedule order (as per perf_event_sched_in()) is: - cpu pinned - task pinned - cpu flexible - task flexible But perf_rotate_context() will unschedule cpu-flexible even if it doesn't need a rotation. Signed-off-by:
-
Peter Zijlstra authored
Similar to how first programming cpu=-1 and then cpu=# is wrong, so is rotating both. It was especially wrong when we were still programming the PMU in this same order, because in that scenario we might never actually end up running cpu=# events at all. Cure this by using the active_list to pick the rotation event; since at programming we already select the left-most event. Signed-off-by:
-
Peter Zijlstra authored
The last argument is, and always must be, the same. Signed-off-by:
-
Peter Zijlstra authored
When an event group contains more events than can be scheduled on the hardware, iterating the full event group for ctx_sched_out is a waste of time. Keep track of the events that got programmed on the hardware, such that we can iterate this smaller list in order to schedule them out. Signed-off-by:
-
Peter Zijlstra authored
Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by:
-
Peter Zijlstra authored
Scheduling in events with cpu=-1 before events with cpu=# changes semantics and is undesirable in that it would priorize these events. Given that groups->index is across all groups we actually have an inter-group ordering, meaning we can merge-sort two groups, which is just what we need to preserve semantics. Signed-off-by:
-
Peter Zijlstra authored
Trivial comment and code fixups.. Signed-off-by:
-
Alexey Budankov authored
Change event groups into RB trees sorted by CPU and then by a 64bit index, so that multiplexing hrtimer interrupt handler would be able skipping to the current CPU's list and ignore groups allocated for the other CPUs. New API for manipulating event groups in the trees is implemented as well as adoption on the API in the current implementation. pinned_group_sched_in() and flexible_group_sched_in() API are introduced to consolidate code enabling the whole group from pinned and flexible groups appropriately. Signed-off-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Signed-off-by:
-
Peter Zijlstra authored
Mark reported his arm64 perf fuzzer runs sometimes splat like: armv8pmu_read_counter+0x1e8/0x2d8 armpmu_event_update+0x8c/0x188 armpmu_read+0xc/0x18 perf_output_read+0x550/0x11e8 perf_event_read_event+0x1d0/0x248 perf_event_exit_task+0x468/0xbb8 do_exit+0x690/0x1310 do_group_exit+0xd0/0x2b0 get_signal+0x2e8/0x17a8 do_signal+0x144/0x4f8 do_notify_resume+0x148/0x1e8 work_pending+0x8/0x14 which asserts that we only call pmu::read() on ACTIVE events. The above callchain does: perf_event_exit_task() perf_event_exit_task_context() task_ctx_sched_out() // INACTIVE perf_event_exit_event() perf_event_set_state(EXIT) // EXIT sync_child_event() perf_event_read_event() perf_output_read() perf_output_read_group() leader->pmu->read() Which results in doing a pmu::read() on an !ACTIVE event. I _think_ this is 'new' since we added attr.inherit_stat, which added the perf_event_read_event() to the exit path, without that perf_event_read_output() would only trigger from samples and for @event to trigger a sample, it's leader _must_ be ACTIVE too. Still, adding this check makes it consistent with the @sub case for the siblings. Reported-and-Tested-by:
-
- 09 Mar, 2018 8 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180308' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Support to display the IPC/Cycle in 'annotate' TUI, for systems where this info can be obtained, like Intel's >= Skylake (Jin Yao) - Support wildcards on PMU name in dynamic PMU events (Agustin Vega-Frias) - Display pmu name when printing unmerged events in stat (Agustin Vega-Frias) - Auto-merge PMU events created by prefix or glob match (Agustin Vega-Frias) - Fix s390 'call' operations target function annotation (Thomas Richter) - Handle s390 PC relative load and store instruction in the augmented 'annotate', code, used so far in the TUI modes of 'perf report' and 'perf annotate' (Thomas Richter) - Provide libtraceevent with a kernel symbol resolver, so that symbols in tracepoint fields can be resolved when showing them in tools such as 'perf report' (Wang YanQing) - Refactor the cgroups code to look more like other code in tools/perf, using cgroup__{put,get} for refcount operations instead of its open-coded equivalent, breaking larger functions, etc (Arnaldo Carvalho de Melo) - Implement support for the -G/--cgroup target in 'perf trace', allowing strace like tracing (plus other events, backtraces, etc) for cgroups (Arnaldo Carvalho de Melo) - Update thread shortname in 'perf sched map' when the thread's COMM changes (Changbin Du) - refcount 'struct mem_info', for better sharing it over several users, avoid duplicating structs and fixing crashes related to use after free (Jiri Olsa) - Display perf.data version, offsets in 'perf report --header' (Jiri Olsa) - Record the machine's memory topology information in a perf.data feature section, to be used by tools such as 'perf c2c' (Jiri Olsa) - Fix output of forced groups in the header for 'perf report' --stdio and --tui (Jiri Olsa) - Better support llvm, clang, cxx make tests in the build process (Jiri Olsa) - Streamline the 'struct perf_mmap' methods, storing some info in the struct instead of passing it via various methods, shortening its signatures (Kan Liang) - Update the quipper perf.data parser library site information (Stephane Eranian) - Correct perf's man pages title markers for asciidoctor (Takashi Iwai) - Intel PT fixes and refactorings paving the way for implementing support for AUX area sampling (Adrian Hunter) Signed-off-by:
-
Kan Liang authored
Userspace RDPMC cannot possibly work for large PEBS, which was introduced in: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") When the PEBS interrupt threshold is larger than one, there is no way to get exact auto-reload times and value for userspace RDPMC. Disable the userspace RDPMC usage when large PEBS is enabled. The only exception is when the PEBS interrupt threshold is 1, in which case user-space RDPMC works well even with auto-reload events. Signed-off-by:Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Kan Liang authored
Auto-reload events needs to be specially handled in event count read. Auto-reload is only available for intel_pmu. Signed-off-by:
-
Kan Liang authored
perf/x86/intel/ds: Introduce ->read() function for auto-reload events and flush the PEBS buffer there There is no way to get exact auto-reload times and values which are needed for event updates unless we flush the PEBS buffer. Introduce intel_pmu_auto_reload_read() to drain the PEBS buffer for auto reload event. To prevent races with the hardware, we can only call drain_pebs() when the PMU is disabled. Signed-off-by:
-
Kan Liang authored
Auto-reload needs to be specially handled when reading event counts. Signed-off-by:
-
Kan Liang authored
There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e3 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Kan Liang authored
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated accordingly. This is fine in current usage because no-one checks it - but fix it for future code: for example, the drain_pebs() will be modified to fix an auto-reload bug. Properly save/restore the old PMU state. Signed-off-by:
-
Kan Liang authored
Large fixed period values could be truncated on Broadwell, for example: perf record -e cycles -c 10000000000 Here the fixed period is 0x2540BE400, but the period which finally applied is 0x540BE400 - which is wrong. The reason is that x86_pmu::limit_period() uses an u32 parameter, so the high 32 bits of 'period' get truncated. This bug was introduced in: commit 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") It's safe to use u64 instead of u32: - Although the 'left' is s64, the value of 'left' must be positive when calling limit_period(). - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch the higher 32 bits. Signed-off-by:
-
- 08 Mar, 2018 7 commits
-
-
Stephane Eranian authored
This patch updates the links to the Quipper library. It is now available from GitHub and has been updated. Reported-by:
Lakshman Annadorai <lakshmana@google.com> Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.comSigned-off-by:
-
Thomas Richter authored
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Jin Yao authored
Unlike the perf report interactive annotate mode, the perf annotate doesn't display the IPC/Cycle even if branch info is recorded in perf data file. perf record -b ... perf annotate function It should show IPC/cycle, but it doesn't. This patch lets perf annotate support the displaying of IPC/Cycle if branch info is in perf data. For example, perf annotate compute_flag Percent│ IPC Cycle │ │ │ Disassembly of section .text: │ │ 0000000000400640 <compute_flag>: │ compute_flag(): │ volatile int count; │ static unsigned int s_randseed; │ │ __attribute__((noinline)) │ int compute_flag() │ { 22.96 │1.18 584 sub $0x8,%rsp │ int i; │ │ i = rand() % 2; 23.02 │1.18 1 → callq rand@plt │ │ return i; 27.05 │3.37 mov %eax,%edx │ } │3.37 add $0x8,%rsp │ { │ int i; │ │ i = rand() % 2; │ │ return i; │3.37 shr $0x1f,%edx │3.37 add %edx,%eax │3.37 and $0x1,%eax │3.37 sub %edx,%eax │ } 26.97 │3.37 2 ← retq Note that, this patch only supports TUI mode. For stdio, now it just keeps original behavior. Will support it in a follow-up patch. $ perf annotate compute_flag --stdio Percent | Source code & Disassembly of div for cycles:ppp (7993 samples) ------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000400640 <compute_flag>: : compute_flag(): : volatile int count; : static unsigned int s_randseed; : : __attribute__((noinline)) : int compute_flag() : { 0.29 : 400640: sub $0x8,%rsp # +100.00% : int i; : : i = rand() % 2; 42.93 : 400644: callq 400490 <rand@plt> # -100.00% (p:100.00%) : : return i; 0.10 : 400649: mov %eax,%edx # +100.00% : } 0.94 : 40064b: add $0x8,%rsp : { : int i; : : i = rand() % 2; : : return i; 27.02 : 40064f: shr $0x1f,%edx 0.15 : 400652: add %edx,%eax 1.24 : 400654: and $0x1,%eax 2.08 : 400657: sub %edx,%eax : } 25.26 : 400659: retq # -100.00% (p:100.00%) Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Acked-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20180223170210.GC7045@tassilo.jf.intel.com Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1519724327-7773-1-git-send-email-yao.jin@linux.intel.comSigned-off-by:
-
Wang YanQing authored
So that beautifiers wanting to resolve kernel function addresses to names can do its work, and when we use "perf report" for output of "perf kmem record", we will get kernel symbol output. This patch affect the output of "perf report" for the record data generated by "perf kmem record" looks like below: Before patch: 0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC 0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO After patch: 0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO 0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC Signed-off-by:
Wang YanQing <udknight@gmail.com> Acked-by:
-
Jiri Olsa authored
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by:
-
Jiri Olsa authored
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by:
-
Jiri Olsa authored
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by:
-
