- 07 Oct, 2014 12 commits
-
-
Petri Gynther authored
GENET MAC has three Tx ring priority registers: - GENET_x_TDMA_PRIORITY0 for queues 0-5 - GENET_x_TDMA_PRIORITY1 for queues 6-11 - GENET_x_TDMA_PRIORITY2 for queues 12-16 Fix bcmgenet_init_multiq() to program them correctly. Signed-off-by:
Petri Gynther <pgynther@google.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petri Gynther authored
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by:
-
WANG Cong authored
Probably not a big deal, but we'd better just use the one we get in retry loop. Fixes: commit 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe") Reported-by:
Joe Perches <joe@perches.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Andy Zhou authored
Fix a openvswitch compilation error when CONFIG_INET is not set: ===================================================== In file included from include/net/geneve.h:4:0, from net/openvswitch/flow_netlink.c:45: include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads': >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration] >> return iptunnel_handle_offloads(skb, udp_csum, type); >> ^ >> >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast >> >> cc1: some warnings being treated as errors ===================================================== Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
-
Andy Zhou authored
Fix a sparse warning introduced by commit: f5796684 (openvswitch: Add support for Geneve tunneling.) caught by kbuild test robot: reproduce: # apt-get install sparse # git checkout f5796684 # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/openvswitch/vport-geneve.c:109:15: sparse: incorrect type in assignment (different base types) # net/openvswitch/vport-geneve.c:109:15: expected restricted __be16 [usertype] sport # net/openvswitch/vport-geneve.c:109:15: got int # >> net/openvswitch/vport-geneve.c:110:56: sparse: incorrect type in argument 3 (different base types) # net/openvswitch/vport-geneve.c:110:56: expected unsigned short [unsigned] [usertype] value # net/openvswitch/vport-geneve.c:110:56: got restricted __be16 [usertype] sport Reported-by:
-
Andy Zhou authored
Fix a sparse warning introduced by Commit 0b5e8b8e (net: Add Geneve tunneling protocol driver) caught by kbuild test robot: # apt-get install sparse # git checkout 0b5e8b8e # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/ipv4/geneve.c:230:42: sparse: incorrect type in assignment (different base types) # net/ipv4/geneve.c:230:42: expected restricted __be32 [addressable] [assigned] [usertype] s_addr # net/ipv4/geneve.c:230:42: got unsigned long [unsigned] <noident> # Reported-by:
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== ipv6: cleanup after rt6_genid removal Leftover patches after rt6_genid removal after 705f1c86 ("ipv6: remove rt6i_genid"). Major two changes are: * keep fib6_sernum per namespace to reduce number of flushes in case system has high number of namespaces * make fn_sernum updates cheaper v2: Incorporated feedback from Cong Wang, thanks a lot! ==================== Signed-off-by:
-
Hannes Frederic Sowa authored
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
Try to reduce number of possible fn_sernum mutation by constraining them to their namespace. Also remove rt_genid which I forgot to remove in 705f1c86 ("ipv6: remove rt6i_genid"). Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t to fib6_walk_state as recommended by Cong Wang. Cc: Cong Wang <cwang@twopensource.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
-
- 06 Oct, 2014 28 commits
-
-
Eric Dumazet authored
Marking this as static allows compiler to inline it. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Fabian Frederick authored
-Add __rcu annotation on table to fix sparse warnings: net/phonet/pn_dev.c:279:25: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:279:25: expected struct net_device *<noident> net/phonet/pn_dev.c:279:25: got void [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:376:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:376:17: expected struct net_device *volatile <noident> net/phonet/pn_dev.c:376:17: got struct net_device [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:392:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:392:17: expected struct net_device *<noident> net/phonet/pn_dev.c:392:17: got void [noderef] <asn:4>*<noident> -Access table with rcu_access_pointer (fixes the following sparse errors): net/phonet/pn_dev.c:278:25: error: incompatible types in comparison expression (different address spaces) net/phonet/pn_dev.c:391:17: error: incompatible types in comparison expression (different address spaces) Suggested-by:
Fabian Frederick <fabf@skynet.be> Acked-by:
-
David S. Miller authored
John Fastabend says: ==================== net sched rcu updates This fixes the use of tcf_proto from RCU callbacks it requires moving the unbind calls out of the callbacks and removing the tcf_proto argument from the tcf_em_tree_destroy(). This is a rework of two previous series and addresses comments from Cong. And should apply against latest net-next. The previous series links below for reference: (1/2) net: sched: do not use tcf_proto 'tp' argument from call_rcu http://patchwork.ozlabs.org/patch/396149/ (2/2) net: sched: replace ematch calls to use struct net http://patchwork.ozlabs.org/patch/396150/ net: sched: cls_cgroup tear down exts and ematch from rcu callback http://patchwork.ozlabs.org/patch/396307/ ==================== Signed-off-by:
-
John Fastabend authored
Using the tcf_proto pointer 'tp' from inside the classifiers callback is not valid because it may have been cleaned up by another call_rcu occuring on another CPU. 'tp' is currently being used by tcf_unbind_filter() in this patch we move instances of tcf_unbind_filter outside of the call_rcu() context. This is safe to do because any running schedulers will either read the valid class field or it will be zeroed. And all schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. Reported-by:
Cong Wang <xiyou.wangconf@gmail.com> Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
John Fastabend authored
It is not RCU safe to destroy the action chain while there is a possibility of readers accessing it. Move this code into the rcu callback using the same rcu callback used in the code patch to make a change to head. Signed-off-by:
-
John Fastabend authored
This removes the tcf_proto argument from the ematch code paths that only need it to reference the net namespace. This allows simplifying qdisc code paths especially when we need to tear down the ematch from an RCU callback. In this case we can not guarentee that the tcf_proto structure is still valid. Signed-off-by:
-
Eric Dumazet authored
Some TSO engines might have a too heavy setup cost, that impacts performance on hosts sending small bursts (2 MSS per packet). This patch adds a device gso_min_segs, allowing drivers to set a minimum segment size for TSO packets, according to the NIC performance. Tested on a mlx4 NIC, this allows to get a ~110% increase of throughput when sending 2 MSS per packet. Signed-off-by:
-
hayeswang authored
Restart autonegotiation is necessary after setting EEE. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Daniel Borkmann authored
In case we find a general query with non-zero number of sources, we are dropping the skb as it's malformed. RFC3376, section 4.1.8. Number of Sources (N): This number is zero in a General Query or a Group-Specific Query, and non-zero in a Group-and-Source-Specific Query. Therefore, reflect that by using kfree_skb() instead of consume_skb(). Fixes: d679c532 ("igmp: avoid drop_monitor false positives") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
-
Mahesh Bandewar authored
Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Mahesh Bandewar authored
It's a trivial fix to display xmit_hash_policy for this new TLB mode since it uses transmit-hash-poilicy as part of bonding-master info (/proc/net/bonding/<bonding-interface). Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx4_en: Optimizations to TX flow This patchset contains optimizations to TX flow in mlx4_en driver. It also introduce setting/getting tx copybreak, to enable controlling inline threshold dynamically. TX flow optimizations was authored and posted to the mailing list by Eric Dumazet [1] as a single patch. I splitted this patch to smaller patches, Reviewed it and tested. Changed from original patch: - s/iowrite32be/iowrite32/, since ring->doorbell_qpn is stored as be32 The tx copybreak patch was also suggested by Eric Dumazet, and was edited and reviewed by me. User space patch will be sent after kernel code is ready. I am sending this patchset now since the merge window is near and don't want to miss it. More work need to do: - Disable BF when xmit_more is in use - Make TSO use xmit_more too. Maybe by splitting small TSO packets in the driver itself, to avoid extra cpu/memory costs of GSO before the driver - Fix mlx4_en_xmit buggy handling of queue full in the middle of a burst partially posted to send queue using xmit_more Eric, I edited the patches to have you as the Author and the first signed-off-by. I hope it is ok with you (I wasn't sure if it is ok to sign by you), anyway all the credit to those changes should go to you. Patchset was tested and applied over commit 1e203c1a "(net: sched: suspicious RCU usage in qdisc_watchdog") [1] - https://patchwork.ozlabs.org/patch/394256/ ==================== Signed-off-by:
-
Eric Dumazet authored
Instead of setting inline threshold using module parameter only on driver load, use set_tunable() to set it dynamically. No need to store the threshold per ring, using instead the netdev global priv->prof->inline_thold Initial value still is set using the module parameter, therefore backward compatability is kept. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold) Signed-off-by:
-
Eric Dumazet authored
Reorganize code to call is_inline() once, so compiler can inline it Signed-off-by:
-
Eric Dumazet authored
Properly clear tx_info->ts_requested Signed-off-by:
-
Eric Dumazet authored
Access skb_headlen() once in tx flow Signed-off-by:
-
Eric Dumazet authored
Acces skb_shinfo(skb) once in tx flow. Also, rename @i variable to @i_frag to avoid confusion, as the "goto tx_drop_unmap;" relied on this @i variable. Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
mlx4_en_process_tx_cq() carefully fetches and writes ring->last_nr_txbb and ring->cons only one time to avoid false sharing Signed-off-by:
-
Eric Dumazet authored
mlx4_en_free_tx_desc() uses a prefetchw(&skb->users) to speed up consume_skb() prefetchw(&ring->tx_queue->dql) to speed up BQL update Signed-off-by:
-
Eric Dumazet authored
Add frag0_dma/frag0_byte_count into mlx4_en_tx_info to avoid a cache line miss in TX completion for frames having one dma element. (We avoid reading back the tx descriptor) Note this could be extended to 2/3 dma elements later, as we have free room in mlx4_en_tx_info Also, mlx4_en_free_tx_desc() no longer accesses skb_shinfo(). We use a new nr_maps fields in mlx4_en_tx_info to avoid 2 or 3 cache misses. Signed-off-by:
-
Eric Dumazet authored
Try to allocate using kmalloc_node() first, only on failure use vmalloc() Signed-off-by:
-
Eric Dumazet authored
- doorbell_qpn is stored in the cpu_to_be32() way to avoid bswap() in fast path. - mdev->mr.key stored in ring->mr_key to also avoid bswap() and access to cold cache line. Signed-off-by:
-
Eric Dumazet authored
Reorganize struct mlx4_en_tx_ring to have: - One cache line containing last_nr_txbb & cons & wake_queue, used by tx completion. - One cache line containing fields dirtied by mlx4_en_xmit() - Following part is read mostly and shared by cpus. Align struct mlx4_en_tx_info to a cache line Signed-off-by:
-
Eric Dumazet authored
- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by:
-
Eric Dumazet authored
Standard qdisc API to setup a timer implies an atomic operation on every packet dequeue : qdisc_unthrottled() It turns out this is not really needed for FQ, as FQ has no concept of global qdisc throttling, being a qdisc handling many different flows, some of them can be throttled, while others are not. Fix is straightforward : add a 'bool throttle' to qdisc_watchdog_schedule_ns(), and remove calls to qdisc_unthrottled() in sch_fq. Signed-off-by:
-
Fabio Estevam authored
When fec_enet_alloc_buffers() fails we should better undo the previous actions, which consists of: disabling the FEC clocks and putting the FEC pins into inactive state. The error path for fec_enet_mii_probe() is kept unchanged. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
