Commits · 3776c8891a2d3c5892fa50ab9e2a3b68f5674be6 · nexedi / linux

29 Feb, 2008 16 commits

[NETNS]: Enable IPv4 address manipulations inside namespace. · 3776c889
Denis V. Lunev authored Feb 28, 2008
```
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
```
3776c889
[NETNS]: Enable all routing manipulation via netlink inside namespace. · 1937504d
Denis V. Lunev authored Feb 28, 2008
```
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
```
1937504d

[NETNS]: Process devinet ioctl in the correct namespace. · e5b13cb1

Denis V. Lunev authored Feb 28, 2008

Add namespace parameter to devinet_ioctl and locate device inside it for
state changes.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

e5b13cb1

[NETNS]: Register /proc/net/rt_cache for each namespace. · 73b38711
Denis V. Lunev authored Feb 28, 2008
```
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
```
73b38711

[NETNS]: Process /proc/net/rt_cache inside a namespace. · a75e936f

Denis V. Lunev authored Feb 28, 2008

Show routing cache for a particular namespace only.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

a75e936f

[IPV4]: rt_cache_get_next should take rt_genid into account. · 642d6318

Denis V. Lunev authored Feb 28, 2008

In the other case /proc/net/rt_cache will look inconsistent in respect to
genid.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

642d6318

[NETNS]: Process ip_rt_redirect in the correct namespace. · 317805b8
Denis V. Lunev authored Feb 28, 2008
```
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
```
317805b8

[NETNS]: DST cleanup routines should be called inside namespace. · 9de8f76d

Denis V. Lunev authored Feb 28, 2008

Device inside the namespace can be started and downed. So, active routing
cache should be cleaned up on device stop.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9de8f76d

[NETNS]: Enable inetdev_event notifier. · be162d62

Denis V. Lunev authored Feb 28, 2008

After all these preparations it is time to enable main IPv4 device
initialization routine inside namespace. It is safe do this now.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

be162d62

[NETNS]: Disable multicaststing configuration inside non-initial namespace. · 2430aa85

Denis V. Lunev authored Feb 28, 2008

Do not calls hooks from device notifiers and disallow configuration from
ioctl/netlink layer.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2430aa85

[NETNS]: Default arp parameters lookup. · 0c65babd

Denis V. Lunev authored Feb 28, 2008

Default ARP parameters should be findable regardless of the context.
Required to make inetdev_event working.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

0c65babd

[NETNS]: Register neighbour table parameters in the correct namespace. · 4ab438fc

Denis V. Lunev authored Feb 28, 2008

neigh_sysctl_register should register sysctl entries inside correct namespace
to avoid naming conflict. Typical example is a loopback. Entries for it
present in all namespaces.

Required to make inetdev_event working.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

4ab438fc

[NETNS]: Disable inetaddr notifiers in namespaces other than initial. · 6133fb1a

Denis V. Lunev authored Feb 28, 2008

ip_fib_init is kept enabled. It is already namespace-aware.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

6133fb1a

[NETFILTER]: Consolidate masq_inet_event and masq_device_event. · 6fc68624

Denis V. Lunev authored Feb 28, 2008

They do exactly the same job.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

6fc68624

[IPV4]: Remove check for ifa->ifa_dev != NULL. · 5811769c

Denis V. Lunev authored Feb 28, 2008

This is a callback registered to inet address notifier chain.
The check is useless as:
- ifa->ifa_dev is always != NULL
- similar checks are abscent in all other notifiers.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

5811769c

[IPV4]: Remove ifa != NULL check. · a337499f

Denis V. Lunev authored Feb 28, 2008

This is a callback registered to inet address notifier chain.
The check is useless as:
- ifa is always != NULL
- similar checks are abscent in all other notifiers.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

a337499f

28 Feb, 2008 24 commits

[X25]: Use proc_create() to setup ->proc_fops first · 2335f8ec

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2335f8ec

[WANROUTER]: Use proc_create() to setup ->proc_fops first · 6d37a158

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6d37a158

[8021Q]: Use proc_create() to setup ->proc_fops first · d45fba36

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

d45fba36

[IPV4]: Use proc_create() to setup ->proc_fops first · 77020720

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

77020720

[IPV6]: Use proc_create() to setup ->proc_fops first · 4436f4cb

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4436f4cb

[SCTP]: Use proc_create() to setup ->proc_fops first · 160f17e3

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

160f17e3

[PKTGEN]: Use proc_create() to setup ->proc_fops first · 25296d59

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

25296d59

[NEIGHBOUR]: Use proc_create() to setup ->proc_fops first · 46ecf0b9

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

46ecf0b9

[LLC]: Use proc_create() to setup ->proc_fops first · 7e021809

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7e021809

[IPX]: Use proc_create() to setup ->proc_fops first · 1e15dc98

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1e15dc98

[SUNRPC]: Use proc_create() to setup ->proc_fops first · 2ce8f047

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2ce8f047

Merge branch 'pending' of master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev · 64758bd7
David S. Miller authored Feb 28, 2008

64758bd7

[ATM]: Use proc_create() to setup ->proc_fops first · 16e297b3

Wang Chen authored Feb 28, 2008

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

16e297b3

[SCTP]: Update AUTH structures to match declarations in draft-16. · 7e8616d8

Vlad Yasevich authored Feb 27, 2008

The new SCTP socket api (draft 16) updates the AUTH API structures.
We never exported these since we knew they would change.
Update the rest to match the draft.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

7e8616d8

[SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option · b40db684

Vlad Yasevich authored Feb 27, 2008

The chunks are stored inside a parameter structure in the kernel
and when we copy them to the user, we need to account for
the parameter header.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

b40db684

[SCTP]: Clean up naming conventions of sctp protocol/address family registration · 15efbe76

Neil Horman authored Feb 15, 2008

I noticed while looking into some odd behavior in sctp, that the variable
name sctp_pf_inet6_specific was used twice to represent two different
pieces of data (its both a structure name and a pointer to that type of
structure), which is confusing to say the least, and potentially dangerous
depending on the variable scope.  This patch cleans that up, and makes the
protocol and address family registration names in SCTP more regular,
increasing readability.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

 ipv6.c     |   12 ++++++------
 protocol.c |   12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

15efbe76

[APPLETALK]: Use proc_create() to setup ->proc_fops first · ed2b5b47

Wang Chen authored Feb 28, 2008

As Davem mentioned in his recently patch
(d9595a7b)
that the procfs visibility should occur after
the ->proc_fops are setup.

And also, Alexey provide proc_create() to make
sure that ->proc_fops is setup before gluing PDE
to main tree.

We use proc_create().
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ed2b5b47

[BNX2X]: add bnx2x to MAINTAINERS · 4d9d2cb0

Eliezer Tamir authored Feb 28, 2008

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4d9d2cb0

[BNX2X]: update version, remove CVS strings · 8d84a440

Eliezer Tamir authored Feb 28, 2008

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8d84a440

[BNX2X]: Fix Xmit bugs · 96fc1784

Eliezer Tamir authored Feb 28, 2008

Several endianity corrections in start_xmit()

Fixed TSO bug where packets were missing the TCP flags.
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

96fc1784

[BNX2X]: Prevent PCI queue overflow · e8717a47

Eliezer Tamir authored Feb 28, 2008

Limit traffic through an internal queue to prevent overflow.
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e8717a47

[BNX2X]: fix slowpath races and locking · 228241eb

Eliezer Tamir authored Feb 28, 2008

Fixed locking between fastpath and slowpath operations.

Corrected order of traffic disabling to prevent race when going down
under traffic.

- first have the microcode drop all incoming packets
- then do the slowpath stuff
- only then reset the MAC

Got rid of in_reset_task.

Remove_one() and friends would deference a null pointer if init_one
failed.
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

228241eb

[BNX2X]: fix HW attentions and error handling · 877e9aa4

Eliezer Tamir authored Feb 28, 2008

Some of the HW attentions, used to indicate an error were not properly
acked.

This will cause the driver to endlessly receive interrupts when such
an error happens.

Had to break the code into smaller chunks because it got too nested.
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

877e9aa4

[BNX2X]: fix MSI-X/INT#A errata · 615f8fd9

Eliezer Tamir authored Feb 28, 2008

Errata A0.158 workaround. 

Running in INT#A mode after running with MSI-X fails due to a PCI core
bug.
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

615f8fd9