- 26 Nov, 2010 18 commits
-
-
Arnaldo Carvalho de Melo authored
Tool developers have to fill in a 'perf_event_ops' method table to specify how to handle each event, so far the ones that were not explicitely especified would get a stub that would just discard the event. Change that so that tool developers can get the lost event details and the total number of such events at the end of 'perf report -D' output. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> CC: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Collecting build-ids for long running sessions may take a long time because it needs to traverse the whole just collected perf.data stream of events, marking the DSOs that had hits and then looking for the .note.gnu.build-id ELF section. For things like the 'trace' tool that records and right away consumes the data on systems where its unlikely that the DSOs being monitored will change while 'trace' runs, it is desirable to remove build id collection, so add a -B/--no-buildid option to perf record to allow such use case. Longer term we'll avoid all this if we, at DSO load time, in the kernel, take advantage of this slow code path to collect the build-id and stash it somewhere, so that we can insert it in the PERF_RECORD_MMAP event. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Cyrill Gorcunov authored
Add description of .config in a sake of RAW events. At least this should bring some light to those who will be reading this code. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by:
Stephane Eranian <eranian@google.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
The perf hardware pmu got initialized at various points in the boot, some before early_initcall() some after (notably arch_initcall). The problem is that the NMI lockup detector is ran from early_initcall() and expects the hardware pmu to be present. Sanitize this by moving all architecture hardware pmu implementations to initialize at early_initcall() and move the lockup detector to an explicit initcall right after that. Cc: paulus <paulus@samba.org> Cc: davem <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290707759.2145.119.camel@laptop> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Andi Kleen authored
When booting up a CPU set the various topology masks before calling the CPU_STARTING notifier. This way the notifier can actually use the masks. This is needed for a perf change. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290077254-12165-2-git-send-email-andi@firstfloor.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Some arch implementations call perf_event_overflow() by 'accident', ignore this. Reported-by:
Francis Moreau <francis.moro@gmail.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Franck Bui-Huu authored
Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290525705-6265-3-git-send-email-fbuihuu@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Franck Bui-Huu authored
Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290525705-6265-2-git-send-email-fbuihuu@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Franck Bui-Huu authored
and use it when appropriate. Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290525705-6265-1-git-send-email-fbuihuu@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Make tags find the trace-event definitions Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> LKML-Reference: <1290591835.2072.438.camel@laptop> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Conflicts: arch/x86/kernel/apic/hw_nmi.c Merge reason: Resolve conflict, queue up dependent patch. Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: Pick up latest fixes. Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Stephane noticed that because the perf_sw_event() call is inside the perf_event_task_sched_out() call it won't get called unless we have a per-task counter. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to a hw_breakpoint dep) but doesn't unconditionally provide HAVE_PERF_EVENT. (This can cause build failures on M386/M486 kernel .config's.) Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222055.982965150@chello.nl> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Don Zickus authored
In a kvm virt guests, the perf counters are not emulated. Instead they return zero on a rdmsrl. The perf nmi handler uses the fact that crossing a zero means the counter overflowed (for those counters that do not have specific interrupt bits). Therefore on kvm guests, perf will swallow all NMIs thinking the counters overflowed. This causes problems for subsystems like kgdb which needs NMIs to do its magic. This problem was discovered by running kgdb tests. The solution is to write garbage into a perf counter during the initialization and hopefully reading back the same number. On kvm guests, the value will be read back as zero and we disable perf as a result. Reported-by:
Jason Wessel <jason.wessel@windriver.com> Patch-inspired-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Thomas Gleixner authored
It was found that sometimes children of tasks with inherited events had one extra event. Eventually it turned out to be due to the list rotation no being exclusive with the list iteration in the inheritance code. Cure this by temporarily disabling the rotation while we inherit the events. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Cc: <stable@kernel.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Hitoshi Mitake authored
perf bench: Add feature that measures the performance of the arch/x86/lib/memcpy_64.S memcpy routines via 'perf bench mem' This patch ports arch/x86/lib/memcpy_64.S to perf bench mem memcpy for benchmarking memcpy() in userland with tricky and dirty way. util/include/asm/cpufeature.h, util/include/asm/dwarf2.h, and util/include/linux/linkage.h are mostly dummy files with small wrappers, so that we are able to include memcpy_64.S unmodified. Signed-off-by:
Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: h.mitake@gmail.com Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: Ma Ling <ling.ma@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <1290668693-27068-2-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Hitoshi Mitake authored
After applying this patch, perf bench mem memcpy prints both of prefualted and without prefaulted score of memcpy(). New options --no-prefault and --only-prefault are added to print single result, mainly for scripting usage. Usage example: | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB | # Running mem/memcpy benchmark... | # Copying 500MB Bytes ... | | 634.969014 MB/Sec | 4.828062 GB/Sec (with prefault) | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --only-prefault | # Running mem/memcpy benchmark... | # Copying 500MB Bytes ... | | 4.705192 GB/Sec (with prefault) | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --no-prefault | # Running mem/memcpy benchmark... | # Copying 500MB Bytes ... | | 642.725568 MB/Sec Signed-off-by:
Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: h.mitake@gmail.com Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: Ma Ling <ling.ma@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <1290668693-27068-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 23 Nov, 2010 1 commit
-
-
Rabin Vincent authored
At least on ARM, padding is inserted between rb_node and sym in struct symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to point inside rb_node rather than to the symbol_name_rb_node. Fix this by converting the code to use container_of(). Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20101123163106.GA25677@debian> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 Nov, 2010 1 commit
-
-
Arnaldo Carvalho de Melo authored
The 59365d13 commit, even being reverted by 33e0d57f, showed a non robust behavior in 'perf record': it really should just warn the user that some functionality will not be available. The new behavior then becomes: [acme@felicio linux]$ ls -la /proc/{kallsyms,modules} -r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms -r-------- 1 root root 0 Nov 22 12:19 /proc/modules [acme@felicio linux]$ perf record ls -R > /dev/null Couldn't record kernel reference relocation symbol Symbol resolution may be skewed if relocation was used (e.g. kexec). Check /proc/kallsyms permission or run as root. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ] [acme@felicio linux]$ perf report --stdio [kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols # Events: 98 cycles # # Overhead Command Shared Object Symbol # ........ ....... ............... .................... # 48.26% ls [kernel] [k] ffffffff8102b92b 22.49% ls libc-2.12.90.so [.] __strlen_sse2 8.35% ls libc-2.12.90.so [.] __GI___strcoll_l 8.17% ls ls [.] 11580 3.35% ls libc-2.12.90.so [.] _IO_new_file_xsputn 3.33% ls libc-2.12.90.so [.] _int_malloc 1.88% ls libc-2.12.90.so [.] _int_free 0.84% ls libc-2.12.90.so [.] malloc_consolidate 0.84% ls libc-2.12.90.so [.] __readdir64 0.83% ls ls [.] strlen@plt 0.83% ls libc-2.12.90.so [.] __GI_fwrite_unlocked 0.83% ls libc-2.12.90.so [.] __memcpy_sse2 # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@felicio linux]$ It still has the build-ids for DSOs in the maps with hits: [acme@felicio linux]$ perf buildid-list 77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms] 09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so [acme@felicio linux]$ That can be used in another machine to resolve kernel symbols. Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Marcus Meissner <meissner@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 Nov, 2010 1 commit
-
-
Linus Torvalds authored
-
- 20 Nov, 2010 4 commits
-
-
Corey Ashford authored
This patch makes several changes to "perf stat": - "perf stat" will no longer go ahead and run the application when one or more of the specified events could not be opened. - Use error() and die() instead of pr_err() so that the output is more consistent with "perf top" and "perf record". - Handle permission errors in a more robust way, and in a similar way to "perf record" and "perf top". In addition, the sys_perf_event_open() error handling of "perf top" and "perf record" is made more consistent and adds the following phrase when an event doesn't open (with something ther than an access or permission error): "/bin/dmesg may provide additional information." This is added because kernel code doesn't have a good way of expressing detailed errors to user space, so its only avenue is to use printk's. However, many users may not think of looking at dmesg to find out why an event is being rejected. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <fweisbec@gmail.com> Cc: Ian Munsie <ianmunsi@au1.ibm.com> Cc: Michael Ellerman <michaele@au1.ibm.com> LKML-Reference: <1290217044-26293-1-git-send-email-cjashfor@linux.vnet.ibm.com> Signed-off-by:
Corey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard fs: Do not dispatch FITRIM through separate super_operation ext4: ext4_fill_super shouldn't return 0 on corruption jbd2: fix /proc/fs/jbd2/<dev> when using an external journal ext4: missing unlock in ext4_clear_request_list() ext4: fix setting random pages PageUptodate
-
Lukas Czerner authored
Filesystem independent ioctl was rejected as not common enough to be in core vfs ioctl. Since we still need to access to this functionality this commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch ext4_trim_fs(). It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h and its definition is as follows. struct fstrim_range { __u64 start; __u64 len; __u64 minlen; } start - first Byte to trim len - number of Bytes to trim from start minlen - minimum extent length to trim, free extents shorter than this number of Bytes will be ignored. This will be rounded up to fs block size. After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Lukas Czerner authored
There was concern that FITRIM ioctl is not common enough to be included in core vfs ioctl, as Christoph Hellwig pointed out there's no real point in dispatching this out to a separate vector instead of just through ->ioctl. So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs from super_operation structure. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- 19 Nov, 2010 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix readdir EOVERFLOW on 32-bit archs ceph: fix frag offset for non-leftmost frags ceph: fix dangling pointer ceph: explicitly specify page alignment in network messages ceph: make page alignment explicit in osd interface ceph: fix comment, remove extraneous args ceph: fix update of ctime from MDS ceph: fix version check on racing inode updates ceph: fix uid/gid on resent mds requests ceph: fix rdcache_gen usage and invalidate ceph: re-request max_size if cap auth changes ceph: only let auth caps update max_size ceph: fix open for write on clustered mds ceph: fix bad pointer dereference in ceph_fill_trace ceph: fix small seq message skipping Revert "ceph: update issue_seq on cap grant"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) net: fix kernel-doc for sk_filter_rcu_release be2net: Fix to avoid firmware update when interface is not open. netfilter: fix IP_VS dependencies net: irda: irttp: sync error paths of data- and udata-requests ipv6: Expose reachable and retrans timer values as msecs ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies 3c59x: fix build failure on !CONFIG_PCI ipg.c: remove id [SUNDANCE, 0x1021] net: caif: spi: fix potential NULL dereference ath9k_htc: Avoid setting QoS control for non-QoS frames net: zero kobject in rx_queue_release net: Fix duplicate volatile warning. MAINTAINERS: Add stmmac maintainer bonding: fix a race in IGMP handling cfg80211: fix can_beacon_sec_chan, reenable HT40 gianfar: fix signedness issue net: bnx2x: fix error value sign 8139cp: fix checksum broken r8169: fix checksum broken rds: Integer overflow in RDS cmsg handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: apply magic FIFO fix to vt6420 too
-
Linus Torvalds authored
This reverts commit 59365d13. It turns out that this can break certain existing user land setups. Quoth Sarah Sharp: "On Wednesday, I updated my branch to commit 460781b5 from linus' tree, and my box would not boot. klogd segfaulted, which stalled the whole system. At first I thought it actually hung the box, but it continued booting after 5 minutes, and I was able to log in. It dropped back to the text console instead of the graphical bootup display for that period of time. dmesg surprisingly still works. I've bisected the problem down to this commit (commit 59365d13) The box is running klogd 1.5.5ubuntu3 (from Jaunty). Yes, I know that's old. I read the bit in the commit about changing the permissions of kallsyms after boot, but if I can't boot that doesn't help." So let's just keep the old default, and encourage distributions to do the "chmod -r /proc/kallsyms" in their bootup scripts. This is not worth a kernel option to change default behavior, since it's so easily done in user space. Reported-and-bisected-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcus Meissner <meissner@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnaldo Carvalho de Melo authored
Also remove old snail mail address from CREDITS, moved years ago. LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Robert Morell authored
This change removes the use of hardcoded absolute "/usr/include/elfutils" paths from the perf build. The problem with hardcoded paths is that it prevents them from being overridden by $prefix or by -I in CFLAGS (e.g., for cross-compiling purposes). Instead, just include the "elfutils/" subdirectory as a relative path when files are needed from that directory. Tested by building perf: - Cross-compiled for ARM on x86_64 - Built natively on x86_64 - Built on x86_64 with /usr/include/elfutils moved to another location and manually included in CFLAGS Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> LKML-Reference: <1289945793-31441-1-git-send-email-rmorell@nvidia.com> Signed-off-by:
Robert Morell <rmorell@nvidia.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix typo in keycode validation supporting large scancodes Input: aiptek - tighten up permissions on sysfs attributes Input: sysrq - pass along lone Alt + SysRq
-
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intelLinus Torvalds authored
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Disable FBC on Ironlake to save 1W drm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware drm/i915/crt: Introduce struct intel_crt drm/i915: Do not hold mutex when faulting in user addresses drm: radeon: fix error value sign drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx drm/i915: Retire any pending operations on the old scanout when switching drm/i915: Fix I2C adapter registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (40 commits) drm/radeon/kms: i2c s/sprintf/snprintf/g for safety drm/radeon/kms: fix i2c pad masks on rs4xx drm/ttm: Fix up a theoretical deadlock drm/radeon/kms: fix tiling info on evergreen drm/radeon/kms: fix alignment when allocating buffers drm/vmwgfx: Fix up an error path during bo creation drm/radeon/kms: register an i2c adapter name for the dp aux bus drm/radeon/kms/atom: add proper external encoders support drm/radeon/kms/atom: cleanup and unify DVO handling drm/radeon/kms: properly power up/down the eDP panel as needed (v4) drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode() drm/radeon/kms: turn the backlight off explicitly for dpms drm/radeon/kms: fix typo in r600 cs checker drm: radeon: fix error value sign drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx nouveau: Acknowledge HPD irq in handler, not bottom half drm/nouveau: Fix a few confusions between "chipset" and "card_type". drm/nouveau: don't expose backlight control when available through ACPI drm/nouveau/pm: improve memtiming mappings drm/nouveau: Make PCIE GART size depend on the available RAMIN space. ...
-
Stephane Eranian authored
This patch adds a new -A option to perf stat. If specified then perf stat does not aggregate counts across all monitored CPUs in system-wide mode, i.e., when using -a. This option is not supported in per-thread mode. Being able to get a per-cpu breakdown is useful to detect imbalances between CPUs when running a uniform workload than spans all monitored CPUs. The second version corrects the missing cpumap[] support, so that it works when the -C option is used. The third version fixes a missing cpumap[] in print_counter() and removes a stray patch in builtin-trace.c. Examples on a 4-way system: # perf stat -a -e cycles,instructions -- sleep 1 Performance counter stats for 'sleep 1': 9592808135 cycles 3490380006 instructions # 0.364 IPC 1.001584632 seconds time elapsed # perf stat -a -A -e cycles,instructions -- sleep 1 Performance counter stats for 'sleep 1': CPU0 2398163767 cycles CPU1 2398180817 cycles CPU2 2398217115 cycles CPU3 2398247483 cycles CPU0 872282046 instructions # 0.364 IPC CPU1 873481776 instructions # 0.364 IPC CPU2 872638127 instructions # 0.364 IPC CPU3 872437789 instructions # 0.364 IPC 1.001556052 seconds time elapsed Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <4ce257b5.1e07e30a.7b6b.3aa9@mx.google.com> Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Tejun Heo authored
vt6420 has the same FIFO overflow problem as vt6421 when combined with certain devices. This patch applies the magic fix to vt6420 too. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Martin Qvist <q@maq.dk> Reported-by:
Peter Zijlstra <peterz@infradead.org> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: stable@kernel.org Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Randy Dunlap authored
Fix kernel-doc warning for sk_filter_rcu_release(): Warning(net/core/filter.c:586): missing initial short description on line: * sk_filter_rcu_release: Release a socket filter by rcu_head Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sarveshwar Bandi authored
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by:
Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Darrick J. Wong authored
At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path out of that function returns ret. However, the generic_check_addressable clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g. a group checksum error) returns 0 even though the mount should fail. This causes vfs_kern_mount in turn to think that the mount succeeded, leading to an oops. A simple fix is to avoid using ret for the generic_check_addressable check, which was last changed in commit 30ca22c7. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Alex Shi authored
Frame buffer compression is broken on Ironlake due to buggy hardware. Currently it is disabled through chicken bits, but it still consumes over 1W more than if we simply never attempt to enable the FBC code paths. Signed-off-by:
Alex Shi <alex.shi@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-