- 01 May, 2007 35 commits
-
-
Steven Whitehouse authored
Now that the patch from -mm has gone upstream, we can uncomment the code in GFS2 which uses sprintf_symbol. Signed-off-by:Steven Whitehouse <swhiteho@redhat.com> Cc: Robert Peterson <rpeterso@redhat.com>
-
David Teigland authored
Replace some printk with log_print, and fix some simple cases of lines over 80. Also, return -ENOTCONN if lowcomms_start fails due to no local IP address being available. Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
akpm@linux-foundation.org authored
alpha: fs/gfs2/dir.c: In function 'gfs2_dir_read_leaf': fs/gfs2/dir.c:1322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t' fs/gfs2/dir.c: In function 'gfs2_dir_read': fs/gfs2/dir.c:1455: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type '__u64' Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Steven Whitehouse authored
If a stuffed file is mmaped and a page fault is generated at some offset above the initial page, we need to create a zero page to hang the buffer heads off before we can unstuff the file. This is a fix for bz #236087 Signed-off-by: -
Josef Bacik authored
This patch converts the mount option parsing to use the kernels lib/parser stuff like all of the other filesystems. I tested this and it works well. Thank you, Signed-off-by:
Josef Bacik <jwhiter@redhat.com> Signed-off-by:
-
Patrick Caulfield authored
Fix a few range & initialization bugs in lowcomms. - max_nodeid is really the highest nodeid encountered, so all loops must include it in their iterations. - clean dlm_local_count & connection_idr so we can do a clean restart. - Remove a spurious BUG_ON Signed-Off-By:
Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by:
-
Josef Bacik authored
When you attempt to release a lockspace in DLM, it will hang trying to down a semaphore that has already been downed. The attached patch fixes the problem. Signed-off-by:
-
David Teigland authored
There are flags to enable two specialized features in the dlm: 1. CONVDEADLK causes the dlm to resolve conversion deadlocks internally by changing the granted mode of locks to NL. 2. ALTPR/ALTCW cause the dlm to change the requested mode of locks to PR or CW to grant them if the normal requested mode can't be granted. GFS direct i/o exercises both of these features, especially when mixed with buffered i/o. The dlm has problems with them. The first problem is on the master node. If it demotes a lock as a part of converting it, the actual step of converting the lock isn't being done after the demotion, the lock is just left sitting on the granted queue with a granted mode of NL. I think the mistaken assumption was that the call to grant_pending_locks() would grant it, but that function naturally doesn't look at locks on the granted queue. The second problem is on the process node. If the master either demotes or gives an altmode, the munging of the gr/rq modes is never done in the process copy of the lock, leaving the master/process copies out of sync. Signed-off-by:
-
Robert Peterson authored
The patch below consists of the following changes (in code order): 1. I fixed a minor compiler warning regarding the printing of a kernel symbol address. 2. I implemented a suggestion from Dave Teigland that moves the debugfs information for gfs2 into a subdirectory so we can easily expand our use of debugfs in the future. The current code keeps the glock information in: /debug/gfs2/<fs> With the patch, the new code keeps the glock information in: /debug/gfs2/<fs>/glock That will allow us to create more debugfs files in the future. 3. This fixes a bug whereby a failed mount attempt causes the debugfs file to not be deleted. Failed mount attempts should always clean up after themselves, including deleting the debugfs file and/or directory. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steven Whitehouse authored
This patch detects when the number of entries in a leaf block or inode block (in the case of stuffed directories) is corrupt and informs the user. It prevents us from running off the end of the array thats been allocated for the sorting in this case, Signed-off-by: -
Robert Peterson authored
This is for Bugzilla Bug 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump) seen at the "gfs2 summit". This also fixes the bug that caused garbage to be printed by the "initialized at" field. I apologize for the kludge, but that code will all be ripped out anyway when the official sprint_symbol function becomes available in the Linux kernel. I also changed some formatting so that spaces are replaced by proper tabs. Signed-off-by:
-
Adrian Bunk authored
Every file should include the headers containing the prototypes for it's global functions. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Patrick Caulfield authored
This patch consolidates the TCP & SCTP protocols for the DLM into a single file and makes it switchable at run-time (well, at least before the DLM actually starts up!) For RHEL5 this patch requires Neil Horman's patch that expands the in-kernel socket API but that has already been twice ACKed so it should be OK. The patch adds a new lowcomms.c file that replaces the existing lowcomms-sctp.c & lowcomms-tcp.c files. Signed-off-By:
-
Patrick Caulfield authored
This patch removes a redundant (and incorrect) assignment from compat_output Signed-Off-By:
-
Steven Whitehouse authored
Ths following patch makes GFS2 use the rgrp flags properly. Although there are also separate flags for both data and metadata as well, I've not implemented these as there seems little use for them. On the otherhand, the "noalloc" flag is generally useful for future changes we might which to make, so this ensures that we interpret it correctly. In addition I fixed the comment above the function which was incorrect. Signed-off-by: -
David Teigland authored
A lock id is a uint32 and is used as an opaque reference to the lock. For userland apps, the lkid is passed up, through libdlm, as the return value from a write() on the dlm device. This created a problem when the high bit was 1, making the lkid look like an error. This is fixed by changing how the lkid is composed. The low 16 bits identified the hash bucket for the lock and the high 16 bits were a per-bucket counter (which eventually hit 0x8000 causing the problem). These are simply swapped around; the number of hash table buckets is far below 0x8000, making all lkid's positive when viewed as signed. Signed-off-by:
-
David Teigland authored
Add code to accept purge commands from userland. Signed-off-by:
-
David Teigland authored
Add code for purging orphan locks. A process can also purge all of its own non-orphan locks by passing a pid of zero. Code already exists for processes to create persistent locks that become orphans when the process exits, but the complimentary capability for another process to then purge these orphans has been missing. Signed-off-by:
-
David Teigland authored
This splits the current create_message() function into two parts so that later patches can call the new lower-level _create_message() function when they don't have an rsb struct. No functional change in this patch. Signed-off-by:
-
Steven Whitehouse authored
This sets the drop_count to 0 by default which is a better default for most people. Signed-off-by: -
David Teigland authored
We always want to see the details of the error returned to gfs, but log_debug is often turned off, so use log_error (printk). Signed-off-by:
-
David Teigland authored
Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by:
-
Patrick Caulfield authored
Replacement patch to remove redundant code rather than moving it around. Signed-Off-By:
-
Robert Peterson authored
In Testing the previously posted and accepted patch for https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228540 I uncovered some gfs2 badness. It turns out that the current gfs2 code saves off a process pointer when glocks is taken in both the glock and glock holder structures. Those structures will persist in memory long after the process has ended; pointers to poisoned memory. This problem isn't caused by the 228540 fix; the new capability introduced by the fix just uncovered the problem. I wrote this patch that avoids saving process pointers and instead saves off the process pid. Rather than referencing the bad pointers, it now does process lookups. There is special code that makes the output nicer for printing holder information for processes that have ended. This patch also adds a stub for the new "sprint_symbol" function that exists in Andrew Morton's -mm patch set, but won't go into the base kernel until 2.6.22, since it adds functionality but doesn't fix a bug. Signed-off-by:
-
Benjamin Marzinski authored
This is a fix for bz #208514. When GFS2 frees up space, the freed blocks aren't available for reuse until the resource group is successfully written to the ondisk journal. So in rare cases, GFS2 operations will fail, saying that the filesystem is out of space, when in reality, you are just waiting for a log flush. For instance, on a 1Gig filesystem, if I continually write 10 Mb to a file, and then truncate it, after a hundred interations, the write will fail with -ENOSPC, even though the filesystem is just 1% full. The attached patch calls a log flush in these cases. I tested this patch fairly heavily to check if there were any locking issues that I missed, and it seems to work just fine. Also, this patch only does the log flush if get_local_rgrp makes a complete loop of resource groups without skipping any do to locking issues. The code would be slightly simpler if it just always did the log flush after the first failed pass, and you could only ever have to go through the loop twice, instead of up to three times. However, I guessed that failing to find a rg simply do to locking issues would be common enough to skip the log flush in that case, but I'm not certain that this is the right way to go. Either way, I don't suppose this code will be hit all that often. Signed-off-by:
Benjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by:
-
Benjamin Marzinski authored
When glock_lo_add and rg_lo_add attempt to add an element to the log, they check to see if has already been added before locking the log. If another process adds that element to the log in this window between the check and locking the log, the element will be added to the list twice. This causes the log element list to become corrupted in such a way that the log element can never be successfully removed from the list. This patch pulls the list_empty() check inside the log lock, to remove this window. Signed-off-by:
-
Steven Whitehouse authored
The following patch speeds up lock_dlm's locking by moving the sprintf out from the lock acquisition path and into the lock creation path. This reduces the amount of CPU time used in acquiring locks by a fair amount. Signed-off-by:
-
Patrick Caulfield authored
Currently if the lockspace removal fails the misc device associated with a lockspace is left deleted. After that there is no way to access the orphaned lockspace from userland. This patch recreates the misc device if th dlm_release_lockspace fails. I believe this is better than attempting to remove the lockspace first because that leaves an unattached device lying around. The potential gap in which there is no access to the lockspace between removing the misc device and recreating it is acceptable ... after all the application is trying to remove it, and only new users of the lockspace will be affected. Signed-Off-By:
-
Steven Whitehouse authored
Since gcc didn't evaluate the last two terms of the expression in glock.c:1881 as a constant expression, it resulted in an error on i386 due to the lack of a 64bit divide instruction. This adds some brackets to fix the problem. This was reported by Andrew Morton. Signed-off-by: -
Steven Whitehouse authored
This patch prevents the printing of a warning message in cases where the fs is functioning normally by handing off responsibility for unlinked, but still open inodes, to another node for eventual deallocation. Also, there is now an improved system for ensuring that such requests to other nodes do not get lost. The callback on the iopen lock is only ever called when i_nlink == 0 and when a node is unable to deallocate it due to it still being in use on another node. When a node receives the callback therefore, it knows that i_nlink must be zero, so we mark it as such (in gfs2_drop_inode) in order that it will then attempt deallocation of the inode itself. As an additional benefit, queuing a demote request no longer requires a memory allocation. This simplifies the code for dealing with gfs2_holders as it removes one special case. There are two new fields in struct gfs2_glock. gl_demote_state is the state which the remote node has requested and gl_demote_time is the time when the request came in. Both fields are only valid when the GLF_DEMOTE flag is set in gl_flags. Signed-off-by: -
Josef Whiter authored
If we are writing a file, and in the middle of writing the file another node attempts to get a shared lock on that file (by doing a du for example) the process doing the writing will hang waiting on lock_page. The reason for this is because when we have waiters on a exclusive glock, we will go through and flush out all dirty pages associated with that inode and release the lock. The problem is that when we flush the dirty pages, we could hit a page that we have locked durring the generic_file_buffered_write part of this operation. This patch unlocks the page before we go to dequeue the lock and locks it immediatly afterwards, since generic_file_buffered_write needs the page locked when the commit_write is completed. This patch resolves the problem, however if somebody sees a better way to do this please don't hesistate to yell. Signed-off-by:
-
Patrick Caulfield authored
The length of the second element of the kvec array was not initialised before being added to the first one. This could cause invalid lengths to be passed to kernel_recvmsg Signed-Off-By:
-
Josef Whiter authored
If you specify an invalid mount option when trying to mount a gfs2 filesystem, gfs2 will oops. The attached patch resolves this problem. Signed-off-by:
-
Robert Peterson authored
The attached patch resolves bz 228540. This adds the capability for gfs2 to dump gfs2 locks through the debugfs file system. This used to exist in gfs1 as "gfs_tool lockdump" but it's missing from gfs2 because all the ioctls were stripped out. Please see the bugzilla for more history about the fix. This patch is also attached to the bugzilla record. The patch is against Steve Whitehouse's latest nmw git tree kernel (2.6.21-rc1) and has been tested on system trin-10. Signed-off-by:
-
Linus Torvalds authored
The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by:Jeff Garzik <jeff@garzik.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Apr, 2007 5 commits
-
-
David Rientjes authored
For backwards compatibility, call_platform_enable_wakeup() can return 0 instead of -EIO since we aren't guaranteed to have errno defined. Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
David Rientjes <rientjes@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Jeremy Fitzhardinge authored
Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by:
-
Johannes Berg authored
This patch changes the docs and behaviour from "all states valid" to "no states valid" if no .valid callback is assigned. Users of pm_ops that only need mem sleep can assign pm_valid_only_mem without any overhead, others will require more elaborate callbacks. Now that all users of pm_ops have a .valid callback this is a safe thing to do and prevents things from getting messy again as they were before. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl> Cc: <linux-pm@lists.linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Johannes Berg authored
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Johannes Berg authored
This patch removes the firmware disk suspend mode which is the wrong approach, it is supposed to be used for implementing firmware-based disk suspend but cannot actually be used for that. Signed-off-by:
-
