- 14 Jun, 2017 40 commits
-
-
Al Viro authored
commit 414cf718 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit 8785d84d upstream. Signed-off-by:
-
Tejun Heo authored
commit 41c25707 upstream. In most cases, a cgroup controller don't care about the liftimes of cgroups. For the controller, a css becomes online when ->css_online() is called on it and offline when ->css_offline() is called. However, cpuset is special in that the user interface it exposes cares whether certain cgroups exist or not. Combined with the RCU delay between cgroup removal and css offlining, this can lead to user visible behavior oddities where operations which should succeed after cgroup removals fail for some time period. The effects of cgroup removals are delayed when seen from userland. This patch adds css_is_dying() which tests whether offline is pending and updates is_cpuset_online() so that the function returns false also while offline is pending. This gets rid of the userland visible delays. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.comSigned-off-by:
-
Ulrik De Bie authored
commit 47eb0c8b upstream. The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Reviewed-by:
Arjan Opmeer <arjan@opmeer.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Waiman Long authored
commit 33c35aa4 upstream. The kill_css() function may be called more than once under the condition that the css was killed but not physically removed yet followed by the removal of the cgroup that is hosting the css. This patch prevents any harmm from being done when that happens. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Sean Young authored
commit 963761a0 upstream. A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Sui Chen authored
commit 8bfd1743 upstream. (Correction in this resend: fixed function name acer_sa5_271_workaround; fixed the always-true condition in the function; fixed description.) On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not get detected because the port_map and CAP.nr_ports combination causes the driver to skip the port that is actually connected to the SSD. More specifically, either all SATA ports are identified as DUMMY, or all ports get ``link down'' and never get up again. This problem occurs occasionally. When this problem occurs, CAP may hold a value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01. When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to 0x7 significantly reduces the occurrence of this problem. Link: https://bugzilla.kernel.org/attachment.cgi?id=253091Signed-off-by:
Sui Chen <suichen6@gmail.com> Tested-by:
Damian Ivanov <damianatorrpm@gmail.com> Signed-off-by:
-
Rob Clark authored
commit 786813c3 upstream. Somehow the helper was never retrofitted for mdp5. Which meant when plane_state->fence was added, it could get copied into new state in mdp5_plane_duplicate_state(). If an update to disable the plane (for example on rmfb) managed to sneak in after an nonblock update had swapped state, but before it was committed, we'd get a splat: WARNING: CPU: 1 PID: 69 at ../drivers/gpu/drm/drm_atomic_helper.c:1061 drm_atomic_helper_wait_for_fences+0xe0/0xf8 Modules linked in: CPU: 1 PID: 69 Comm: kworker/1:1 Tainted: G W 4.11.0-rc8+ #1187 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: events drm_mode_rmfb_work_fn task: ffffffc036560d00 task.stack: ffffffc036550000 PC is at drm_atomic_helper_wait_for_fences+0xe0/0xf8 LR is at complete_commit.isra.1+0x44/0x1c0 pc : [<ffffff80084f6040>] lr : [<ffffff800854176c>] pstate: 20000145 sp : ffffffc036553b60 x29: ffffffc036553b60 x28: ffffffc0264e6a00 x27: ffffffc035659000 x26: 0000000000000000 x25: ffffffc0240e8000 x24: 0000000000000038 x23: 0000000000000000 x22: ffffff800858f200 x21: ffffffc0240e8000 x20: ffffffc02f56a800 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffffffc00a192700 x13: 0000000000000004 x12: 0000000000000000 x11: ffffff80089a1690 x10: 00000000000008f0 x9 : ffffffc036553b20 x8 : ffffffc036561650 x7 : ffffffc03fe6cb40 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000002 x3 : ffffffc035659000 x2 : ffffffc0240e8c80 x1 : 0000000000000000 x0 : ffffffc02adbe588 ---[ end trace 13aeec77c3fb55e2 ]--- Call trace: Exception stack(0xffffffc036553990 to 0xffffffc036553ac0) 3980: 0000000000000000 0000008000000000 39a0: ffffffc036553b60 ffffff80084f6040 0000000000004ff0 0000000000000038 39c0: ffffffc0365539d0 ffffff800857e098 ffffffc036553a00 ffffff800857e1b0 39e0: ffffffc036553a10 ffffff800857c554 ffffffc0365e8400 ffffffc0365e8400 3a00: ffffffc036553a20 ffffff8008103358 000000000001aad7 ffffff800851b72c 3a20: ffffffc036553a50 ffffff80080e9228 ffffffc02adbe588 0000000000000000 3a40: ffffffc0240e8c80 ffffffc035659000 0000000000000002 0000000000000001 3a60: 0000000000000000 ffffffc03fe6cb40 ffffffc036561650 ffffffc036553b20 3a80: 00000000000008f0 ffffff80089a1690 0000000000000000 0000000000000004 3aa0: ffffffc00a192700 0000000000000000 0000000000000000 0000000000000000 [<ffffff80084f6040>] drm_atomic_helper_wait_for_fences+0xe0/0xf8 [<ffffff800854176c>] complete_commit.isra.1+0x44/0x1c0 [<ffffff8008541c64>] msm_atomic_commit+0x32c/0x350 [<ffffff8008516230>] drm_atomic_commit+0x50/0x60 [<ffffff8008517548>] drm_atomic_remove_fb+0x158/0x250 [<ffffff80085186d0>] drm_framebuffer_remove+0x50/0x158 [<ffffff8008518818>] drm_mode_rmfb_work_fn+0x40/0x58 [<ffffff80080d5668>] process_one_work+0x1d0/0x378 [<ffffff80080d5a54>] worker_thread+0x244/0x488 [<ffffff80080db7fc>] kthread+0xfc/0x128 [<ffffff8008082ec0>] ret_from_fork+0x10/0x50 Fixes: 96260142 ("drm/fence: add in-fences support") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Eric Anholt authored
commit 43523eba upstream. Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Nicholas Bellinger authored
commit 4ff83daa upstream. During v4.3 when the overflow/underflow check was relaxed by commit c72c5250: commit c72c5250 Author: Roland Dreier <roland@purestorage.com> Date: Wed Jul 22 15:08:18 2015 -0700 target: allow underflow/overflow for PR OUT etc. commands to allow underflow/overflow for Windows compliance + FCP, a consequence was to allow control CDBs to process overflow data for iscsi-target with immediate data as well. As per Roland's original change, continue to allow underflow cases for control CDBs to make Windows compliance + FCP happy, but until overflow for control CDBs is supported tree-wide, explicitly reject all control WRITEs with overflow following pre v4.3.y logic. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
David Arcari authored
commit 6c770036 upstream. For a driver that does not set the CPUFREQ_STICKY flag, if all of the ->init() calls fail, cpufreq_register_driver() should return an error. This will prevent the driver from loading. Fixes: ce1bcfe9 (cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs) Signed-off-by:
David Arcari <darcari@redhat.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit b169c13d upstream. It's possible that get_random_{u32,u64} is used before the crng has initialized, in which case, its output might not be cryptographically secure. For this problem, directly, this patch set is introducing the *_wait variety of functions, but even with that, there's a subtle issue: what happens to our batched entropy that was generated before initialization. Prior to this commit, it'd stick around, supplying bad numbers. After this commit, we force the entropy to be re-extracted after each phase of the crng has initialized. In order to avoid a race condition with the position counter, we introduce a simple rwlock for this invalidation. Since it's only during this awkward transition period, after things are all set up, we stop using it, so that it doesn't have an impact on performance. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Pratyush Anand authored
commit 6f9193ec upstream. modprobe is not able to resolve sysfs modalias for mei devices. # cat /sys/class/watchdog/watchdog0/device/watchdog/watchdog0/device/modalias mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: # modprobe --set-version 4.9.6-200.fc25.x86_64 -R mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: modprobe: FATAL: Module mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: not found in directory /lib/modules/4.9.6-200.fc25.x86_64 # cat /lib/modules/4.9.6-200.fc25.x86_64/modules.alias | grep 05b79a6f-4628-4d7f-899d-a91514cb32ab alias mei:*:05b79a6f-4628-4d7f-899d-a91514cb32ab:*:* mei_wdt commit b26864ca ("mei: bus: add client protocol version to the device alias"), however sysfs modalias is still in formmat mei:S:uuid:*. This patch equates format of uevent and sysfs modalias so that modprobe is able to resolve the aliases. Fixes: commit b26864ca ("mei: bus: add client protocol version to the device alias") Signed-off-by:
Pratyush Anand <panand@redhat.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit b425e504 upstream. Since the introduction of .init_rq_fn() and .exit_rq_fn() it is essential that the memory allocated for struct request_queue stays around until all blk_exit_rl() calls have finished. Hence make blk_init_rl() take a reference on struct request_queue. This patch fixes the following crash: general protection fault: 0000 [#2] SMP CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff88013a108040 task.stack: ffffc9000071c000 RIP: 0010:free_request_size+0x1a/0x30 RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003 RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418 RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009 R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8 R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0 Call Trace: mempool_destroy.part.10+0x21/0x40 mempool_destroy+0xe/0x10 blk_exit_rl+0x12/0x20 blkg_free+0x4d/0xa0 __blkg_release_rcu+0x59/0x170 rcu_process_callbacks+0x260/0x4e0 __do_softirq+0x116/0x250 smpboot_thread_fn+0x123/0x1e0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 Fixes: commit e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Matt Ranostay authored
commit 9122b54f upstream. Using iio_trigger_poll() can oops when multiple interrupts happen before the first is handled. Use iio_trigger_poll_chained() instead and use the timestamp when processed, since it will be in theory be 2 ms max latency. Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Matt Ranostay authored
commit 275292d3 upstream. AS3935 interrupt mask has been incorrect so valid lightning events would never trigger an buffer event. Also noise interrupt should be BIT(0). Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Signed-off-by:
-
Marcin Niestroj authored
commit 4eecbe81 upstream. In case oldtrig == trig == NULL (which happens when we set none trigger, when there is already none set) there is a NULL pointer dereference during iio_trigger_put(trig). Below is kernel output when this occurs: [ 26.741790] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 26.750179] pgd = cacc0000 [ 26.752936] [00000000] *pgd=8adc6835, *pte=00000000, *ppte=00000000 [ 26.759531] Internal error: Oops: 17 [#1] SMP ARM [ 26.764261] Modules linked in: usb_f_ncm u_ether usb_f_acm u_serial usb_f_fs libcomposite configfs evbug [ 26.773844] CPU: 0 PID: 152 Comm: synchro Not tainted 4.12.0-rc1 #2 [ 26.780128] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 26.786329] task: cb1de200 task.stack: cac92000 [ 26.790892] PC is at iio_trigger_write_current+0x188/0x1f4 [ 26.796403] LR is at lock_release+0xf8/0x20c [ 26.800696] pc : [<c0736f34>] lr : [<c016efb0>] psr: 600d0013 [ 26.800696] sp : cac93e30 ip : cac93db0 fp : cac93e5c [ 26.812193] r10: c0e64fe8 r9 : 00000000 r8 : 00000001 [ 26.817436] r7 : cb190810 r6 : 00000010 r5 : 00000001 r4 : 00000000 [ 26.823982] r3 : 00000000 r2 : 00000000 r1 : cb1de200 r0 : 00000000 [ 26.830528] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 26.837683] Control: 10c5387d Table: 8acc006a DAC: 00000051 [ 26.843448] Process synchro (pid: 152, stack limit = 0xcac92210) [ 26.849475] Stack: (0xcac93e30 to 0xcac94000) [ 26.853857] 3e20: 00000001 c0736dac c054033c cae6b680 [ 26.862060] 3e40: cae6b680 00000000 00000001 cb3f8610 cac93e74 cac93e60 c054035c c0736db8 [ 26.870264] 3e60: 00000001 c054033c cac93e94 cac93e78 c029bf34 c0540348 00000000 00000000 [ 26.878469] 3e80: cb3f8600 cae6b680 cac93ed4 cac93e98 c029b320 c029bef0 00000000 00000000 [ 26.886672] 3ea0: 00000000 cac93f78 cb2d41fc caed3280 c029b214 cac93f78 00000001 000e20f8 [ 26.894874] 3ec0: 00000001 00000000 cac93f44 cac93ed8 c0221dcc c029b220 c0e1ca39 cb2d41fc [ 26.903079] 3ee0: cac93f04 cac93ef0 c0183ef0 c0183ab0 cb2d41fc 00000000 cac93f44 cac93f08 [ 26.911282] 3f00: c0225eec c0183ebc 00000001 00000000 c0223728 00000000 c0245454 00000001 [ 26.919485] 3f20: 00000001 caed3280 000e20f8 cac93f78 000e20f8 00000001 cac93f74 cac93f48 [ 26.927690] 3f40: c0223680 c0221da4 c0246520 c0245460 caed3283 caed3280 00000000 00000000 [ 26.935893] 3f60: 000e20f8 00000001 cac93fa4 cac93f78 c0224520 c02235e4 00000000 00000000 [ 26.944096] 3f80: 00000001 000e20f8 00000001 00000004 c0107f84 cac92000 00000000 cac93fa8 [ 26.952299] 3fa0: c0107de0 c02244e8 00000001 000e20f8 0000000e 000e20f8 00000001 fbad2484 [ 26.960502] 3fc0: 00000001 000e20f8 00000001 00000004 beb6b698 00064260 0006421c beb6b4b4 [ 26.968705] 3fe0: 00000000 beb6b450 b6f219a0 b6e2f268 800d0010 0000000e cac93ff4 cac93ffc [ 26.976896] Backtrace: [ 26.979388] [<c0736dac>] (iio_trigger_write_current) from [<c054035c>] (dev_attr_store+0x20/0x2c) [ 26.988289] r10:cb3f8610 r9:00000001 r8:00000000 r7:cae6b680 r6:cae6b680 r5:c054033c [ 26.996138] r4:c0736dac r3:00000001 [ 26.999747] [<c054033c>] (dev_attr_store) from [<c029bf34>] (sysfs_kf_write+0x50/0x54) [ 27.007686] r5:c054033c r4:00000001 [ 27.011290] [<c029bee4>] (sysfs_kf_write) from [<c029b320>] (kernfs_fop_write+0x10c/0x224) [ 27.019579] r7:cae6b680 r6:cb3f8600 r5:00000000 r4:00000000 [ 27.025271] [<c029b214>] (kernfs_fop_write) from [<c0221dcc>] (__vfs_write+0x34/0x120) [ 27.033214] r10:00000000 r9:00000001 r8:000e20f8 r7:00000001 r6:cac93f78 r5:c029b214 [ 27.041059] r4:caed3280 [ 27.043622] [<c0221d98>] (__vfs_write) from [<c0223680>] (vfs_write+0xa8/0x170) [ 27.050959] r9:00000001 r8:000e20f8 r7:cac93f78 r6:000e20f8 r5:caed3280 r4:00000001 [ 27.058731] [<c02235d8>] (vfs_write) from [<c0224520>] (SyS_write+0x44/0x98) [ 27.065806] r9:00000001 r8:000e20f8 r7:00000000 r6:00000000 r5:caed3280 r4:caed3283 [ 27.073582] [<c02244dc>] (SyS_write) from [<c0107de0>] (ret_fast_syscall+0x0/0x1c) [ 27.081179] r9:cac92000 r8:c0107f84 r7:00000004 r6:00000001 r5:000e20f8 r4:00000001 [ 27.088947] Code: 1a000009 e1a04009 e3a06010 e1a05008 (e5943000) [ 27.095244] ---[ end trace 06d1dab86d6e6bab ]--- To fix that problem call iio_trigger_put(trig) only when trig is not NULL. Fixes: d5d24bcc ("iio: trigger: close race condition in acquiring trigger reference") Signed-off-by:
Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by:
-
Franziska Naepelt authored
commit 7cc3bff4 upstream. The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS). There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger. Bit 1 represents ALS measurement trigger. This two bit fields are interchanged within the driver. see datasheet page 24: http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdfSigned-off-by:
Franziska Naepelt <franziska.naepelt@idt.com> Fixes: 7ac702b3 ("iio: ltr501: Add interrupt support") Acked-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
-
Raveendra Padasalagi authored
commit f7d86ecf upstream. The third argument of devm_request_threaded_irq() is the primary handler. It is called in hardirq context and checks whether the interrupt is relevant to the device. If the primary handler returns IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is scheduled to run in process context. bcm_iproc_adc.c uses the secondary handler as the primary one and the other way around. So this patch fixes the same, along with re-naming the secondary handler and primary handler names properly. Tested on the BCM9583XX iProc SoC based boards. Fixes: 4324c97e ("iio: Add driver for Broadcom iproc-static-adc") Reported-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by:
-
Oleg Drokin authored
commit 0a33252e upstream. lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct lov_user_md pointer from user- or kernel-space. This changes the behavior of copy_from_user() on SPARC and may result in a misaligned access exception which in turn oopses the kernel. In fact the relevant argument to lov_getstripe() is never called with a kernel-space pointer and so changing the address limits is unnecessary and so we remove the calls to save, set, and restore the address limits. Signed-off-by:
John L. Hammond <john.hammond@intel.com> Reviewed-on: http://review.whamcloud.com/6150 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Li Wei <wei.g.li@intel.com> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Michael Thalmeier authored
commit 0340ff83 upstream. ci_role BUGs when the role is >= CI_ROLE_END. Signed-off-by:
Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Jisheng Zhang authored
commit aa1f058d upstream. Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0 [ 2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68 [ 2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8 [ 2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98 [ 2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138 [ 2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18 [ 2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0 [ 2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560 [ 2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240 [ 2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0 [ 2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0 [ 2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28 [ 2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238 [ 2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8 [ 2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50 [ 2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128 [ 2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100 [ 2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50 Fixes: 3f124d23 ("usb: chipidea: add role init and destroy APIs") Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
-
Andrey Smirnov authored
commit 62b97d50 upstream. Unlike i.MX53, i.MX51's USBOH3 register file does not implemenent registers past offset 0x018, which includes MX53_USB_CLKONOFF_CTRL_OFFSET and trying to access that register on said platform results in external abort. Fix it by enabling CLKONOFF accessing codepath only for i.MX53. Fixes 3be3251d ("usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY") Cc: cphealy@gmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Bin Liu authored
commit b3addcf0 upstream. Currently VBUS is turned off while a usb device is detached, and turned on again by the polling routine. This short period VBUS loss prevents usb modem to switch mode. VBUS should be constantly on for host-only mode, so this changes the driver to not turn off VBUS for host-only mode. Fixes: 2f3fd2c5 ("usb: musb: Prepare dsps glue layer for PM runtime support") Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Thinh Nguyen authored
commit dc9217b6 upstream. f_mass_storage has a memorry barrier issue with the sleep and wake functions that can cause a deadlock. This results in intermittent hangs during MSC file transfer. The host will reset the device after receiving no response to resume the transfer. This issue is seen when dwc3 is processing 2 transfer-in-progress events at the same time, invoking completion handlers for CSW and CBW. Also this issue occurs depending on the system timing and latency. To increase the chance to hit this issue, you can force dwc3 driver to wait and process those 2 events at once by adding a small delay (~100us) in dwc3_check_event_buf() whenever the request is for CSW and read the event count again. Avoid debugging with printk and ftrace as extra delays and memory barrier will mask this issue. Scenario which can lead to failure: ----------------------------------- 1) The main thread sleeps and waits for the next command in get_next_command(). 2) bulk_in_complete() wakes up main thread for CSW. 3) bulk_out_complete() tries to wake up the running main thread for CBW. 4) thread_wakeup_needed is not loaded with correct value in sleep_thread(). 5) Main thread goes to sleep again. The pattern is shown below. Note the 2 critical variables. * common->thread_wakeup_needed * bh->state CPU 0 (sleep_thread) CPU 1 (wakeup_thread) ============================== =============================== bh->state = BH_STATE_FULL; smp_wmb(); thread_wakeup_needed = 0; thread_wakeup_needed = 1; smp_rmb(); if (bh->state != BH_STATE_FULL) sleep again ... As pointed out by Alan Stern, this is an R-pattern issue. The issue can be seen when there are two wakeups in quick succession. The thread_wakeup_needed can be overwritten in sleep_thread, and the read of the bh->state maybe reordered before the write to thread_wakeup_needed. This patch applies full memory barrier smp_mb() in both sleep_thread() and wakeup_thread() to ensure the order which the thread_wakeup_needed and bh->state are written and loaded. However, a better solution in the future would be to use wait_queue method that takes care of managing memory barrier between waker and waiter. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
commit 75fb6363 upstream. commit a39be606 ("drm: Do a full device unregister when unplugging") causes backtraces like this one when unplugging an usb drm device while it is in use: usb 2-3: USB disconnect, device number 25 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424 drm_mode_config_cleanup+0x220/0x280 [drm] ... RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm] ... Call Trace: gm12u320_modeset_cleanup+0xe/0x10 [gm12u320] gm12u320_driver_unload+0x35/0x70 [gm12u320] drm_dev_unregister+0x3c/0xe0 [drm] drm_unplug_dev+0x12/0x60 [drm] gm12u320_usb_disconnect+0x36/0x40 [gm12u320] usb_unbind_interface+0x72/0x280 device_release_driver_internal+0x158/0x210 device_release_driver+0x12/0x20 bus_remove_device+0x104/0x180 device_del+0x1d2/0x350 usb_disable_device+0x9f/0x270 usb_disconnect+0xc6/0x260 ... [drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458 drm_mode_config_cleanup+0x268/0x280 [drm] ... <same Call Trace> ---[ end trace 80df975dae439ed6 ]--- general protection fault: 0000 [#1] SMP ... Call Trace: ? __switch_to+0x225/0x450 drm_mode_rmfb_work_fn+0x55/0x70 [drm] process_one_work+0x193/0x3c0 worker_thread+0x4a/0x3a0 ... RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98 ---[ end trace 80df975dae439ed7 ]--- After which the system is unusable this is caused by drm_dev_unregister getting called immediately on unplug, which calls the drivers unload function which calls drm_mode_config_cleanup which removes the framebuffer object while userspace is still holding a reference to it. Reverting commit a39be606 ("drm: Do a full device unregister when unplugging") leads to the following oops on unplug instead, when userspace closes the last fd referencing the drm_dev: sysfs group 'power' not found for kobject 'card1-Unknown-1' ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237 sysfs_remove_group+0x80/0x90 ... RIP: 0010:sysfs_remove_group+0x80/0x90 ... Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0xfd/0x350 device_unregister+0x1a/0x60 drm_sysfs_connector_remove+0x39/0x50 [drm] drm_connector_unregister+0x5a/0x70 [drm] drm_connector_unregister_all+0x45/0xa0 [drm] drm_modeset_unregister_all+0x12/0x30 [drm] drm_dev_unregister+0xca/0xe0 [drm] drm_put_dev+0x32/0x60 [drm] drm_release+0x2f3/0x380 [drm] __fput+0xdf/0x1e0 ... ---[ end trace ecfb91ac85688bbe ]--- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: down_write+0x1f/0x40 ... Call Trace: debugfs_remove_recursive+0x55/0x1b0 drm_debugfs_connector_remove+0x21/0x40 [drm] drm_connector_unregister+0x62/0x70 [drm] drm_connector_unregister_all+0x45/0xa0 [drm] drm_modeset_unregister_all+0x12/0x30 [drm] drm_dev_unregister+0xca/0xe0 [drm] drm_put_dev+0x32/0x60 [drm] drm_release+0x2f3/0x380 [drm] __fput+0xdf/0x1e0 ... ---[ end trace ecfb91ac85688bbf ]--- This is caused by the revert moving back to drm_unplug_dev calling drm_minor_unregister which does: device_del(minor->kdev); dev_set_drvdata(minor->kdev, NULL); /* safety belt */ drm_debugfs_cleanup(minor); Causing the sysfs entries to already be removed even though we still have references to them in e.g. drm_connector. Note we must call drm_minor_unregister to notify userspace of the unplug of the device, so calling drm_dev_unregister is not completely wrong the problem is that drm_dev_unregister does too much. This commit fixes drm_unplug_dev by not only reverting commit a39be606 ("drm: Do a full device unregister when unplugging") but by also adding a call to drm_modeset_unregister_all before the drm_minor_unregister calls to make sure all sysfs entries are removed before calling device_del(minor->kdev) thereby also fixing the second set of oopses caused by just reverting the commit. Fixes: a39be606 ("drm: Do a full device unregister when unplugging") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeffy <jeffy.chen@rock-chips.com> Cc: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com> Reported-by:
Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.comSigned-off-by:
-
Jan Kara authored
commit 67a7d5f5 upstream. Currently, extent manipulation operations such as hole punch, range zeroing, or extent shifting do not record the fact that file data has changed and thus fdatasync(2) has a work to do. As a result if we crash e.g. after a punch hole and fdatasync, user can still possibly see the punched out data after journal replay. Test generic/392 fails due to these problems. Fix the problem by properly marking that file data has changed in these operations. Fixes: a4bb6b64Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 4f8caa60 upstream. When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. Fixes: 12735f88Signed-off-by:
-
Konstantin Khlebnikov authored
commit 887a9730 upstream. ext4_expand_extra_isize() should clear only space between old and new size. Fixes: 6dd4ee7c # v2.6.23 Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Jan Kara authored
commit 7d95eddf upstream. Currently, SEEK_HOLE implementation in ext4 may both return that there's a hole at some offset although that offset already has data and skip some holes during a search for the next hole. The first problem is demostrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec) Whence Result HOLE 0 Where we can see that SEEK_HOLE wrongly returned offset 0 as containing a hole although we have written data there. The second problem can be demonstrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offsets 56k..128k has been ignored by the SEEK_HOLE call. The underlying problem is in the ext4_find_unwritten_pgoff() which is just buggy. In some cases it fails to update returned offset when it finds a hole (when no pages are found or when the first found page has higher index than expected), in some cases conditions for detecting hole are just missing (we fail to detect a situation where indices of returned pages are not contiguous). Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page indices and also handle all cases where we got less pages then expected in one place and handle it properly there. Fixes: c8c0df24 CC: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
Julien Grall authored
commit 753c09b5 upstream. Commit 5995a68a "xen/privcmd: Add support for Linux 64KB page granularity" did not go far enough to support 64KB in mmap_batch_fn. The variable 'nr' is the number of 4KB chunk to map. However, when Linux is using 64KB page granularity the array of pages (vma->vm_private_data) contain one page per 64KB. Fix it by incrementing st->index correctly. Furthermore, st->va is not correctly incremented as PAGE_SIZE != XEN_PAGE_SIZE. Fixes: 5995a68a ("xen/privcmd: Add support for Linux 64KB page granularity") Reported-by:
Feng Kan <fkan@apm.com> Signed-off-by:
Julien Grall <julien.grall@arm.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Marc Gonzalez authored
commit 60cf0ce1 upstream. According to Boris, some user-space tools expect MTD drivers to update ecc_stats.corrected, and it's better to provide a lower bound than to provide no information at all. Fixes: 6956e238 ("mtd: nand: add tango NAND flash controller support") Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Andres Galacho authored
commit 2761b4f1 upstream. The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to module.alias: alias: of:N*T*Csigma,smp8758-nandC* alias: of:N*T*Csigma,smp8758-nand Fixes: 6956e238 ("mtd: nand: add tango NAND flash controller support") Signed-off-by:
Andres Galacho <andresgalacho@gmail.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Jan Kara authored
commit d8747d64 upstream. Commit b685d3d6 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d6 CC: reiserfs-devel@vger.kernel.org Signed-off-by:
-
Hou Tao authored
commit 5be6b756 upstream. When adding a cfq_group into the cfq service tree, we use CFQ_IDLE_DELAY as the delay of cfq_group's vdisktime if there have been other cfq_groups already. When cfq is under iops mode, commit 9a7f38c4 ("cfq-iosched: Convert from jiffies to nanoseconds") could result in a large iops delay and lead to an abnormal io schedule delay for the added cfq_group. To fix it, we just need to revert to the old CFQ_IDLE_DELAY value: HZ / 5 when iops mode is enabled. Despite having the same value, the delay of a cfq_queue in idle class and the delay of cfq_group are different things, so I define two new macros for the delay of a cfq_group under time-slice mode and iops mode. Fixes: 9a7f38c4 ("cfq-iosched: Convert from jiffies to nanoseconds") Signed-off-by:
Hou Tao <houtao1@huawei.com> Acked-by:
-
Thomas Petazzoni authored
commit b2d3c270 upstream. The XORv2 engine on Armada 7K/8K can only access the first 40 bits of the physical address space, so the DMA mask must be set accordingly. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 9dd4f319 upstream. The current implementation of interrupt coalescing doesn't work, because it doesn't configure the coalescing timer, which is needed to make sure we get an interrupt at some point. As a fix for stable, we simply remove the interrupt coalescing functionality. It will be re-introduced properly in a future commit. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
-
Thomas Petazzoni authored
commit 44d5887a upstream. The mv_xor_v2_tx_submit() gets the next available HW descriptor by calling mv_xor_v2_get_desq_write_ptr(), which reads a HW register telling the next available HW descriptor. This was working fine when HW descriptors were issued for processing directly in tx_submit(). However, as part of the review process of the driver, a change was requested to move the actual kick-off of HW descriptors processing to ->issue_pending(). Due to this, reading the HW register to know the next available HW descriptor no longer works. So instead of using this HW register, we implemented a software index pointing to the next available HW descriptor. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
-
Hanna Hawa authored
commit ab2c5f0a upstream. The engine was enabled prior to its configuration, which isn't correct. This patch relocates the activation of the XOR engine, to be after the configuration of the XOR engine. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
Hanna Hawa <hannah@marvell.com> Signed-off-by:
-
Thomas Petazzoni authored
commit bc473da1 upstream. Descriptors that have not been acknowledged by the async_tx layer should not be re-used, so this commit adjusts the implementation of mv_xor_v2_prep_sw_desc() to skip descriptors for which async_tx_test_ack() is false. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
-
