- 24 Jul, 2008 40 commits
-
-
Michael Halcrow authored
There is no good reason to immediately open the lower file, and that can cause problems with files that the user does not intend to immediately open, such as device nodes. This patch removes the persistent file open from the interpose step and pushes that to the locations where eCryptfs really does need the lower persistent file, such as just before reading or writing the metadata stored in the lower file header. Two functions are jumping to out_dput when they should just be jumping to out on error paths. This patch also fixes these. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Halcrow authored
When creating device nodes, eCryptfs needs to delay actually opening the lower persistent file until an application tries to open. Device handles may not be backed by anything when they first come into existence. [Valdis.Kletnieks@vt.edu: build fix] Signed-off-by:
-
Harvey Harrison authored
Fixe sparse warnings: fs/ecryptfs/inode.c:368:15: warning: cast to restricted __be64 fs/ecryptfs/mmap.c:385:12: warning: incorrect type in assignment (different base types) fs/ecryptfs/mmap.c:385:12: expected unsigned long long [unsigned] [assigned] [usertype] file_size fs/ecryptfs/mmap.c:385:12: got restricted __be64 [usertype] <noident> fs/ecryptfs/mmap.c:428:12: warning: incorrect type in assignment (different base types) fs/ecryptfs/mmap.c:428:12: expected unsigned long long [unsigned] [assigned] [usertype] file_size fs/ecryptfs/mmap.c:428:12: got restricted __be64 [usertype] <noident> Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Harvey Harrison authored
Fixes the following sparse warnings: fs/ecryptfs/crypto.c:1036:8: warning: cast to restricted __be32 fs/ecryptfs/crypto.c:1038:8: warning: cast to restricted __be32 fs/ecryptfs/crypto.c:1077:10: warning: cast to restricted __be32 fs/ecryptfs/crypto.c:1103:6: warning: incorrect type in assignment (different base types) fs/ecryptfs/crypto.c:1105:6: warning: incorrect type in assignment (different base types) fs/ecryptfs/crypto.c:1124:8: warning: incorrect type in assignment (different base types) fs/ecryptfs/crypto.c:1241:21: warning: incorrect type in assignment (different base types) fs/ecryptfs/crypto.c:1244:30: warning: incorrect type in assignment (different base types) fs/ecryptfs/crypto.c:1414:23: warning: cast to restricted __be32 fs/ecryptfs/crypto.c:1417:32: warning: cast to restricted __be16 Signed-off-by:
-
Miklos Szeredi authored
Clean up overcomplicated string copy, which also gets rid of this bogus warning: fs/ecryptfs/main.c: In function 'ecryptfs_parse_options': include/asm/arch/string_32.h:75: warning: array subscript is above array bounds Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Eric Sandeen authored
Mounting with invalid key signatures should probably fail, if they were specifically requested but not available. Also fix case checks in process_request_key_err() for the right sign of the errnos, as spotted by Jan Tluka. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Jan Tluka <jtluka@redhat.com> Acked-by:
-
Tyler Hicks authored
The userspace eCryptfs daemon sends HELO and QUIT messages to the kernel for per-user daemon (un)registration. These messages are required when netlink is used as the transport, but (un)registration is handled by opening and closing the device file when miscdev is the transport. These messages should be discarded in the miscdev transport so that a daemon isn't registered twice. Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
eCryptfs would really like to have read-write access to all files in the lower filesystem. Right now, the persistent lower file may be opened read-only if the attempt to open it read-write fails. One way to keep from having to do that is to have a privileged kthread that can open the lower persistent file on behalf of the user opening the eCryptfs file; this patch implements this functionality. This patch will properly allow a less-privileged user to open the eCryptfs file, followed by a more-privileged user opening the eCryptfs file, with the first user only being able to read and the second user being able to both read and write. eCryptfs currently does this wrong; it will wind up calling vfs_write() on a file that was opened read-only. This is fixed in this patch. Signed-off-by:
-
Wang Chen authored
Compile warning: ignoring return value of `sysfs_create_link', declared with attribute warn_unused_result. If sysfs_create_link failed, take care of the return value and do some error handle after the failure. Since sysfs_remove_link() will check whether a link exists, when removing the link in error path, we don't need to care whether a link was created. Signed-off-by:
Wang Chen <wangchen@cn.fujitsu.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
vt.c DO_UPDATE macro checks if the console is visible but doesn't check if the console is blanked. In fact updating fbcon while the console is blanked is not only unnecessary but can even cause screen corruption. Therefore I am adding a simple check on console_blanked in DO_UPDATE. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jiri Slaby authored
Hold console sem while creating/destroying sysfs files. Serialisation is so far done by BKL held in tty release_dev and chrdev_open, but no other locks are held in open path. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Aristeu Rozanski <aris@ruivo.org> Signed-off-by:
-
Jan Nikitenko authored
Improve PIO transfer mode of au1550 spi controller by continuing of spi transfer, instead of aborting transfer when transmit underflow interrupt occurrs. Verified by oscilloscope that the spi clock pauses on trasmit underflow, so transfer continuation is perfectly valid even though au1550 datasheet says that on tx underflow zeroes will be transfered. Also make some error messages more specific. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Manuel Lauss authored
Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA resources from platform resource information like any well-behaved platform driver. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
-
Alan Cox authored
Another step to removing ->ioctl and to removing the BKL [dbrownell@users.sourceforge.net: take final step; BKL not needed] Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Grant Likely authored
Currently, 'modalias' in the spi_device structure is a 'const char *'. The spi_new_device() function fills in the modalias value from a passed in spi_board_info data block. Since it is a pointer copy, the new spi_device remains dependent on the spi_board_info structure after the new spi_device is registered (no other fields in spi_device directly depend on the spi_board_info structure; all of the other data is copied). This causes a problem when dynamically propulating the list of attached SPI devices. For example, in arch/powerpc, the list of SPI devices can be populated from data in the device tree. With the current code, the device tree adapter must kmalloc() a new spi_board_info structure for each new SPI device it finds in the device tree, and there is no simple mechanism in place for keeping track of these allocations. This patch changes modalias from a 'const char *' to a fixed char array. By copying the modalias string instead of referencing it, the dependency on the spi_board_info structure is eliminated and an outside caller does not need to maintain a separate spi_board_info allocation for each device. If searched through the code to the best of my ability for any references to modalias which may be affected by this change and haven't found anything. It has been tested with the lite5200b platform in arch/powerpc. [dbrownell@users.sourceforge.net: cope with linux-next changes: KOBJ_NAME_LEN obliterated, etc] Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Robert P. J. Day authored
Use "if SPI_MASTER" to remove numerous dependencies. [dbrownell@users.sourceforge.net: remove a couple now-needless EXPERIMENTAL dependencies too] Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Roel Kluin authored
xilinx_spi->irq is unsigned, so the test fails Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Andrei Konovalov <akonovalov@ru.mvista.com> Cc: Yuri Frolov <yfrolov@ru.mvista.com> Signed-off-by:
-
Chen Gong authored
This updates the SPI clock rate calculations for the spi_mpc83xx driver. Some boundary conditions were wrong, and in several cases divide-by-16 wasn't always needed Signed-off-by:
Chen Gong <g.chen@freescale.com> Signed-off-by:
-
Andre Haupt authored
Signed-off-by:
Andre Haupt <andre@bitwigglers.org> Acked-by:
-
Nye Liu authored
Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break character. The driver appears to properly re-initialize _brkcr when the SMC is restarted. Do not interrupt RX/TX when the termios is being adjusted; it results in corrupted characters appearing on the line. Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Maciej W. Rozycki authored
Changes to the generic console support code that happened a while ago introduced a scenario where the initial console is used in parallel with the final console during a brief period when switching between the two is in progress. During that time a message about the switch-over is printed. With some combinations of chips, firmware and drivers, such as the DEC DZ11 clone used with the DECstation, a hang may happen because the firmware used for the initial console may not expect the state of the chip after it has been initialised by the driver. This is a workaround for the DZ11 which reuses the power-management callback to keep the transmitter of the line associated with the console enabled. It reflects the consensus reached in a discussion a while ago. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Maciej W. Rozycki authored
Changes to the generic console support code that happened a while ago introduced a scenario where the initial console is used in parallel with the final console during a brief period when switching between the two is in progress. During that time a message about the switch-over is printed. With some combinations of chips, firmware and drivers, such as the Zilog Z85C30 SCC used with the DECstation, a hang may happen because the firmware used for the initial console may not expect the state of the chip after it has been initialised by the driver. This is not a bug in the firmware, as some registers it would have to examine are write-only. This is a workaround for the Z85C30 which reuses the power-management callback to keep the transmitter of the line associated with the console enabled. It reflects the consensus reached in a discussion a while ago. Signed-off-by:
-
Catalin(ux) M BOIE authored
It is a no-name PCI card. I found no reference to a producer so I used "UNKNOWN_0x1584" as the name. Full lspci: 01:07.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1584 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \ ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \ DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 1: I/O ports at ec00 [size=128] Region 2: I/O ports at e480 [size=32] Region 3: I/O ports at e400 [size=8] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \ PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] #06 [0080] Capabilities: [4c] Vital Product Data After: 0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A 0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A 0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A 0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A Signed-off-by:Catalin(ux) M BOIE <catab@embedromix.ro> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Aristeu Rozanski authored
Intel 82571 has a "Serial Over LAN" feature that doesn't properly implements the receiving of break characters. When a break is received, it doesn't set UART_LSR_DR and unless another character is received, the break won't be received by the application. Signed-off-by:
Aristeu Rozanski <arozansk@redhat.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Adrian Bunk authored
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by:Adrian Bunk <bunk@kernel.org> Acked-by:
-
Ulrich Drepper authored
Remove the size parameter from the new epoll_create syscall and renames the syscall itself. The updated test program follows. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_epoll_create2 # ifdef __x86_64__ # define __NR_epoll_create2 291 # elif defined __i386__ # define __NR_epoll_create2 329 # else # error "need __NR_epoll_create2" # endif #endif #define EPOLL_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_epoll_create2, 0); if (fd == -1) { puts ("epoll_create2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("epoll_create2(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC); if (fd == -1) { puts ("epoll_create2(EPOLL_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:Ulrich Drepper <drepper@redhat.com> Acked-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Ulrich Drepper authored
This patch adds test that ensure the boundary conditions for the various constants introduced in the previous patches is met. No code is generated. [akpm@linux-foundation.org: fix alpha] Signed-off-by:
-
Ulrich Drepper authored
This patch adds non-blocking support for inotify_init1. The additional changes needed are minimal. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_inotify_init1 # ifdef __x86_64__ # define __NR_inotify_init1 294 # elif defined __i386__ # define __NR_inotify_init1 332 # else # error "need __NR_inotify_init1" # endif #endif #define IN_NONBLOCK O_NONBLOCK int main (void) { int fd = syscall (__NR_inotify_init1, 0); if (fd == -1) { puts ("inotify_init1(0) failed"); return 1; } int fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { puts ("inotify_init1(0) set non-blocking mode"); return 1; } close (fd); fd = syscall (__NR_inotify_init1, IN_NONBLOCK); if (fd == -1) { puts ("inotify_init1(IN_NONBLOCK) failed"); return 1; } fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { puts ("inotify_init1(IN_NONBLOCK) set non-blocking mode"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds support for the TFD_NONBLOCK flag to timerfd_create. The additional changes needed are minimal. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_timerfd_create # ifdef __x86_64__ # define __NR_timerfd_create 283 # elif defined __i386__ # define __NR_timerfd_create 322 # else # error "need __NR_timerfd_create" # endif #endif #define TFD_NONBLOCK O_NONBLOCK int main (void) { int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0); if (fd == -1) { puts ("timerfd_create(0) failed"); return 1; } int fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { puts ("timerfd_create(0) set non-blocking mode"); return 1; } close (fd); fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_NONBLOCK); if (fd == -1) { puts ("timerfd_create(TFD_NONBLOCK) failed"); return 1; } fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { puts ("timerfd_create(TFD_NONBLOCK) set non-blocking mode"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds support for the EFD_NONBLOCK flag to eventfd2. The additional changes needed are minimal. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_eventfd2 # ifdef __x86_64__ # define __NR_eventfd2 290 # elif defined __i386__ # define __NR_eventfd2 328 # else # error "need __NR_eventfd2" # endif #endif #define EFD_NONBLOCK O_NONBLOCK int main (void) { int fd = syscall (__NR_eventfd2, 1, 0); if (fd == -1) { puts ("eventfd2(0) failed"); return 1; } int fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { puts ("eventfd2(0) sets non-blocking mode"); return 1; } close (fd); fd = syscall (__NR_eventfd2, 1, EFD_NONBLOCK); if (fd == -1) { puts ("eventfd2(EFD_NONBLOCK) failed"); return 1; } fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { puts ("eventfd2(EFD_NONBLOCK) does not set non-blocking mode"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds support for the SFD_NONBLOCK flag to signalfd4. The additional changes needed are minimal. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_signalfd4 # ifdef __x86_64__ # define __NR_signalfd4 289 # elif defined __i386__ # define __NR_signalfd4 327 # else # error "need __NR_signalfd4" # endif #endif #define SFD_NONBLOCK O_NONBLOCK int main (void) { sigset_t ss; sigemptyset (&ss); sigaddset (&ss, SIGUSR1); int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0); if (fd == -1) { puts ("signalfd4(0) failed"); return 1; } int fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { puts ("signalfd4(0) set non-blocking mode"); return 1; } close (fd); fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_NONBLOCK); if (fd == -1) { puts ("signalfd4(SFD_NONBLOCK) failed"); return 1; } fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { puts ("signalfd4(SFD_NONBLOCK) does not set non-blocking mode"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch introduces support for the SOCK_NONBLOCK flag in socket, socketpair, and paccept. To do this the internal function sock_attach_fd gets an additional parameter which it uses to set the appropriate flag for the file descriptor. Given that in modern, scalable programs almost all socket connections are non-blocking and the minimal additional cost for the new functionality I see no reason not to add this code. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <pthread.h> #include <stdio.h> #include <unistd.h> #include <netinet/in.h> #include <sys/socket.h> #include <sys/syscall.h> #ifndef __NR_paccept # ifdef __x86_64__ # define __NR_paccept 288 # elif defined __i386__ # define SYS_PACCEPT 18 # define USE_SOCKETCALL 1 # else # error "need __NR_paccept" # endif #endif #ifdef USE_SOCKETCALL # define paccept(fd, addr, addrlen, mask, flags) \ ({ long args[6] = { \ (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \ syscall (__NR_socketcall, SYS_PACCEPT, args); }) #else # define paccept(fd, addr, addrlen, mask, flags) \ syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags) #endif #define PORT 57392 #define SOCK_NONBLOCK O_NONBLOCK static pthread_barrier_t b; static void * tf (void *arg) { pthread_barrier_wait (&b); int s = socket (AF_INET, SOCK_STREAM, 0); struct sockaddr_in sin; sin.sin_family = AF_INET; sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK); sin.sin_port = htons (PORT); connect (s, (const struct sockaddr *) &sin, sizeof (sin)); close (s); pthread_barrier_wait (&b); pthread_barrier_wait (&b); s = socket (AF_INET, SOCK_STREAM, 0); sin.sin_port = htons (PORT); connect (s, (const struct sockaddr *) &sin, sizeof (sin)); close (s); pthread_barrier_wait (&b); return NULL; } int main (void) { int fd; fd = socket (PF_INET, SOCK_STREAM, 0); if (fd == -1) { puts ("socket(0) failed"); return 1; } int fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { puts ("socket(0) set non-blocking mode"); return 1; } close (fd); fd = socket (PF_INET, SOCK_STREAM|SOCK_NONBLOCK, 0); if (fd == -1) { puts ("socket(SOCK_NONBLOCK) failed"); return 1; } fl = fcntl (fd, F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { puts ("socket(SOCK_NONBLOCK) does not set non-blocking mode"); return 1; } close (fd); int fds[2]; if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1) { puts ("socketpair(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("socketpair(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_NONBLOCK, 0, fds) == -1) { puts ("socketpair(SOCK_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("socketpair(SOCK_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } pthread_barrier_init (&b, NULL, 2); struct sockaddr_in sin; pthread_t th; if (pthread_create (&th, NULL, tf, NULL) != 0) { puts ("pthread_create failed"); return 1; } int s = socket (AF_INET, SOCK_STREAM, 0); int reuse = 1; setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse)); sin.sin_family = AF_INET; sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK); sin.sin_port = htons (PORT); bind (s, (struct sockaddr *) &sin, sizeof (sin)); listen (s, SOMAXCONN); pthread_barrier_wait (&b); int s2 = paccept (s, NULL, 0, NULL, 0); if (s2 < 0) { puts ("paccept(0) failed"); return 1; } fl = fcntl (s2, F_GETFL); if (fl & O_NONBLOCK) { puts ("paccept(0) set non-blocking mode"); return 1; } close (s2); close (s); pthread_barrier_wait (&b); s = socket (AF_INET, SOCK_STREAM, 0); sin.sin_port = htons (PORT); setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse)); bind (s, (struct sockaddr *) &sin, sizeof (sin)); listen (s, SOMAXCONN); pthread_barrier_wait (&b); s2 = paccept (s, NULL, 0, NULL, SOCK_NONBLOCK); if (s2 < 0) { puts ("paccept(SOCK_NONBLOCK) failed"); return 1; } fl = fcntl (s2, F_GETFL); if ((fl & O_NONBLOCK) == 0) { puts ("paccept(SOCK_NONBLOCK) does not set non-blocking mode"); return 1; } close (s2); close (s); pthread_barrier_wait (&b); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
Building on the previous change to anon_inode_getfd, this patch introduces support for handling of O_NONBLOCK in addition to the already supported O_CLOEXEC. Following patches will take advantage of this support. As can be seen, the additional support for supporting this functionality is minimal. Signed-off-by:
-
Ulrich Drepper authored
This patch introduces the new syscall inotify_init1 (note: the 1 stands for the one parameter the syscall takes, as opposed to no parameter before). The values accepted for this parameter are function-specific and defined in the inotify.h header. Here the values must match the O_* flags, though. In this patch CLOEXEC support is introduced. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_inotify_init1 # ifdef __x86_64__ # define __NR_inotify_init1 294 # elif defined __i386__ # define __NR_inotify_init1 332 # else # error "need __NR_inotify_init1" # endif #endif #define IN_CLOEXEC O_CLOEXEC int main (void) { int fd; fd = syscall (__NR_inotify_init1, 0); if (fd == -1) { puts ("inotify_init1(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("inotify_init1(0) set close-on-exit"); return 1; } close (fd); fd = syscall (__NR_inotify_init1, IN_CLOEXEC); if (fd == -1) { puts ("inotify_init1(IN_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: -
Ulrich Drepper authored
This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds the new dup3 syscall. It extends the old dup2 syscall by one parameter which is meant to hold a flag value. Support for the O_CLOEXEC flag is added in this patch. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_dup3 # ifdef __x86_64__ # define __NR_dup3 292 # elif defined __i386__ # define __NR_dup3 330 # else # error "need __NR_dup3" # endif #endif int main (void) { int fd = syscall (__NR_dup3, 1, 4, 0); if (fd == -1) { puts ("dup3(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("dup3(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC); if (fd == -1) { puts ("dup3(O_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("dup3(O_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds the new epoll_create2 syscall. It extends the old epoll_create syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name EPOLL_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_epoll_create2 # ifdef __x86_64__ # define __NR_epoll_create2 291 # elif defined __i386__ # define __NR_epoll_create2 329 # else # error "need __NR_epoll_create2" # endif #endif #define EPOLL_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_epoll_create2, 1, 0); if (fd == -1) { puts ("epoll_create2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("epoll_create2(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC); if (fd == -1) { puts ("epoll_create2(EPOLL_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
The timerfd_create syscall already has a flags parameter. It just is unused so far. This patch changes this by introducing the TFD_CLOEXEC flag to set the close-on-exec flag for the returned file descriptor. A new name TFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_timerfd_create # ifdef __x86_64__ # define __NR_timerfd_create 283 # elif defined __i386__ # define __NR_timerfd_create 322 # else # error "need __NR_timerfd_create" # endif #endif #define TFD_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0); if (fd == -1) { puts ("timerfd_create(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("timerfd_create(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_CLOEXEC); if (fd == -1) { puts ("timerfd_create(TFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("timerfd_create(TFD_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Ulrich Drepper authored
This patch adds the new eventfd2 syscall. It extends the old eventfd syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is EFD_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name EFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_eventfd2 # ifdef __x86_64__ # define __NR_eventfd2 290 # elif defined __i386__ # define __NR_eventfd2 328 # else # error "need __NR_eventfd2" # endif #endif #define EFD_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_eventfd2, 1, 0); if (fd == -1) { puts ("eventfd2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("eventfd2(0) sets close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC); if (fd == -1) { puts ("eventfd2(EFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by:
-
