This allows using xtfpga platform with both MMU and noMMU cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

noMMU configuration doesn't use special area for vmalloc allocations,
don't print it in the memory map.
PAGE_OFFSET is fixed to 0 in noMMU, use min_low_pfn and max_low_pfn for
lowmem range display.
Make all XCHAL_KSEG_* constants unsigned long for consistency with other
addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Memory accounting code can't handle pages below
PLATFORM_DEFAULT_MEM_START. Reserve those pages if they exist.
When PLATFORM_DEFAULT_MEM_START is zero reserve one page at address 0 to
make sure that successfull memory allocations don't return NULL.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

initialize_mmu sets up atomctl SR which is needed for s32c1i to function
correctly even in noMMU configurations. It's also a good place to set up
caching attributes of physical memory.

Allow enabling INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX in noMMU
configurations for setting up atomctl and cache attributes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Instead of initializing vecbase in initialize_mmu macro, which may be
expanded either in Image.elf reset vector hadler or in the kernel
head.S, both times only when CONFIG_MMU is enabled, do this
initialization once in _startup function.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Use the same offset from the default physical memory start address as in
LOAD_MEMORY_ADDRESS definition.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Change KERNELOFFSET, LOAD_MEMORY_ADDRESS and VIRTUAL_MEMORY_ADDRESS to be
relative to the start of physical memory in noMMU configuration, as
there's no uniform memory remapping to KSEG starting at 0xd0000000.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use
LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try
to link it when building noMMU configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

TLB sanity checking code depends on full MMU presence and may not be
built in noMMU confgiuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Most cache flushing code is only relevant for MMU. Don't build it for
nommu configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Nommu unconditionally provides arch_get_unmapped_area that always
returns -ENOMEM.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Add MAP_UNINITIALIZED to xtensa version of mman.h to keep mm/nommu.c
happy.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

mmu_context.h is not used in nommu configuration, nommu_context.h is
used instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

This config allows running SMP-enabled bitstream on LX200 board.
NFS or FLASH rootfs, minimal debug, up to 4 cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

This config enables most important features, NFS or FLASH rootfs and
minimal debug.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Userspace actually passes single parameter (path name) to the umount
syscall, so new umount just fails. Fix it by requesting old umount
syscall implementation and re-wiring umount to it.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Otherwise we get the following build warning:
    (XTENSA_PLATFORM_XTFPGA) selects ETHOC which has unmet direct
    dependencies (NETDEVICES && ETHERNET && HAS_IOMEM && HAS_DMA)
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

The default pgprot_noncached doesn't do anything. This leads to issues
when drivers rely on it to disable caching in userspace mappings.
Implement pgprot_noncached properly so that caching of userspace mappings
could be controlled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Pull SCSI fixes from James Bottomley:
 "This is a set of two small fixes, both to code which went in during
  the merge window: cxgb4i has a scheduling in atomic bug in its new
  ipv6 code and uas fails to work properly with the new scsi-mq code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] uas: disable use of blk-mq I/O path
  [SCSI] cxgb4i: avoid holding mutex in interrupt context

Pull kconfig fixes for tiny setups from Josh Triplett:
 "Two Kconfig bugfixes for 3.17 related to tinification.  These fixes
  make the Kconfig "General Setup" menu much more usable"

* tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
  init/Kconfig: Hide printk log config if CONFIG_PRINTK=n

commit 03b8c7b6 ("futex: Allow
architectures to skip futex_atomic_cmpxchg_inatomic() test") added the
HAVE_FUTEX_CMPXCHG symbol right below FUTEX.  This placed it right in
the middle of the options for the EXPERT menu.  However,
HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops
placing items in the EXPERT menu, and displays the remaining several
EXPERT items (starting with EPOLL) directly in the General Setup menu.

Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make
HAVE_FUTEX_CMPXCHG itself depend on FUTEX.  With this change, the
subsequent items display as part of the EXPERT menu again; the EMBEDDED
menu now appears as the next top-level item in the General Setup menu,
which makes General Setup much shorter and more usable.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

The buffers sized by CONFIG_LOG_BUF_SHIFT and
CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't
ask about their size at all.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

Pull i2c fixes from Wolfram Sang:
 "Two i2c driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: qup: Fix order of runtime pm initialization
  i2c: rk3x: fix 0 length write transfers

Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace ring buffer iterator fix from Steven Rostedt:
 "While testing some new changes for 3.18, I kept hitting a bug every so
  often in the ring buffer.  At first I thought it had to do with some
  of the changes I was working on, but then testing something else I
  realized that the bug was in 3.17 itself.  I ran several bisects as
  the bug was not very reproducible, and finally came up with the commit
  that I could reproduce easily within a few minutes, and without the
  change I could run the tests over an hour without issue.  The change
  fit the bug and I figured out a fix.  That bad commit was:

    Commit 651e22f2 "ring-buffer: Always reset iterator to reader page"

  This commit fixed a bug, but in the process created another one.  It
  used the wrong value as the cached value that is used to see if things
  changed while an iterator was in use.  This made it look like a change
  always happened, and could cause the iterator to go into an infinite
  loop"

* tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix infinite spin in reading buffer

Pull cifs/smb3 fixes from Steve French:
 "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression)
  and for incorrectly closing file handle in symlink error cases"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix readpages retrying on reconnects
  Fix problem recognizing symlinks

Pull raid5 discard fix from Neil Brown:
 "One fix for raid5 discard issue"

* tag 'md/3.17-final-fix' of git://neil.brown.name/md:
  md/raid5: disable 'DISCARD' by default due to safety concerns.

Pull drm fixes from Dave Airlie:
 "Nothing too major or scary.

  One i915 regression fix, nouveau has a tmds regression fix, along with
  a regression fix for the runtime pm code for optimus laptops not
  restoring the display hw correctly"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: make sure display hardware is reinitialised on runtime resume
  drm/nouveau: punt fbcon resume out to a workqueue
  drm/nouveau: fix regression on original nv50 board
  drm/nv50/disp: fix dpms regression on certain boards
  drm/i915: Flush the PTEs after updating them before suspend

The uas driver uses the block layer tag for USB3 stream IDs.  With
blk-mq we can get larger tag numbers that the queue depth, which breaks
this assumption.  A fix is under way for 3.18, but sits on top of
large changes so can't easily be backported.   Set the disable_blk_mq
path so that a uas device can't easily crash the system when using
blk-mq for SCSI.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 /
  ACPI) and one trivial fix for a callback return value mismatch in the
  cpufreq integrator driver.

  Specifics:

   - A recent cpufreq core fix went too far and introduced a regression
     in the system suspend code path.  Fix from Viresh Kumar.

   - An ACPI-related commit in the i915 driver that fixed backlight
     problems for some Thinkpads inadvertently broke a Dell machine (in
     3.16).  Fix from Aaron Lu.

   - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit
     that put wait_event() under a spinlock by mistake.  Fix that
     (Rafael J Wysocki).

   - The return value type of integrator_cpufreq_remove() is void, but
     should be int.  Fix from Arnd Bergmann"

* tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  ACPI / i915: Update the condition to ignore firmware backlight change request
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

final regression fix for 3.17.

* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Flush the PTEs after updating them before suspend

The runtime pm calls need to be done before populating the children via the
i2c_add_adapter call.  If this is not done, a child can run into issues trying
to do i2c read/writes due to the pm_runtime_sync failing.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

i2cdetect -q was broken (everything was a false positive, and no transfers were
actually being sent over i2c). The way it works is by sending a 0 length write
request and checking for NACK. This patch fixes the 0 length writes and actually
sends them.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Max Schwarz <max.schwarz@online.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

* pm-cpufreq:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

* acpi-video:
  ACPI / i915: Update the condition to ignore firmware backlight change request

Merge fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: page_alloc: fix zone allocation fairness on UP
  perf: fix perf bug in fork()
  MAINTAINERS: change git URL for mpc5xxx tree
  mm: memcontrol: do not iterate uninitialized memcgs
  ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler

The zone allocation batches can easily underflow due to higher-order
allocations or spills to remote nodes.  On SMP that's fine, because
underflows are expected from concurrency and dealt with by returning 0.
But on UP, zone_page_state will just return a wrapped unsigned long,
which will get past the <= 0 check and then consider the zone eligible
until its watermarks are hit.

Commit 3a025760 ("mm: page_alloc: spill to remote nodes before
waking kswapd") already made the counter-resetting use
atomic_long_read() to accomodate underflows from remote spills, but it
didn't go all the way with it.

Make it clear that these batches are expected to go negative regardless
of concurrency, and use atomic_long_read() everywhere.

Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy")
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>