Skip to content

L
linux
Switch branch/tag
  1. 08 Feb, 2008 6 commits
    • Ingo Molnar's avatar
      SLUB: fix checkpatch warnings · 3adbefee
      Ingo Molnar authored 
      fix checkpatch --file mm/slub.c errors and warnings.

 $ q-code-quality-compare
                                      errors   lines of code   errors/KLOC
 mm/slub.c      [before]                  22            4204           5.2
 mm/slub.c      [after]                    0            4210             0

no code changed:

    text    data     bss     dec     hex filename
   22195    8634     136   30965    78f5 slub.o.before
   22195    8634     136   30965    78f5 slub.o.after

   md5:
     93cdfbec2d6450622163c590e1064358  slub.o.before.asm
     93cdfbec2d6450622163c590e1064358  slub.o.after.asm

[clameter: rediffed against Pekka's cleanup patch, omitted
moves of the name of a function to the start of line]
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      3adbefee
    • Nick Piggin's avatar
      Use non atomic unlock · a76d3546
      Nick Piggin authored 
      Slub can use the non-atomic version to unlock because other flags will not
get modified with the lock held.
Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
Acked-by: default avatarChristoph Lameter <clameter@sgi.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      a76d3546
    • Christoph Lameter's avatar
      SLUB: Support for performance statistics · 8ff12cfc
      Christoph Lameter authored 
      The statistics provided here allow the monitoring of allocator behavior but
at the cost of some (minimal) loss of performance. Counters are placed in
SLUB's per cpu data structure. The per cpu structure may be extended by the
statistics to grow larger than one cacheline which will increase the cache
footprint of SLUB.

There is a compile option to enable/disable the inclusion of the runtime
statistics and its off by default.

The slabinfo tool is enhanced to support these statistics via two options:

-D 	Switches the line of information displayed for a slab from size
	mode to activity mode.

-A	Sorts the slabs displayed by activity. This allows the display of
	the slabs most important to the performance of a certain load.

-r	Report option will report detailed statistics on

Example (tbench load):

slabinfo -AD		->Shows the most active slabs

Name                   Objects    Alloc     Free   %Fast
skbuff_fclone_cache         33 111953835 111953835  99  99
:0000192                  2666  5283688  5281047  99  99
:0001024                   849  5247230  5246389  83  83
vm_area_struct            1349   119642   118355  91  22
:0004096                    15    66753    66751  98  98
:0000064                  2067    25297    23383  98  78
dentry                   10259    28635    18464  91  45
:0000080                 11004    18950     8089  98  98
:0000096                  1703    12358    10784  99  98
:0000128                   762    10582     9875  94  18
:0000512                   184     9807     9647  95  81
:0002048                   479     9669     9195  83  65
anon_vma                   777     9461     9002  99  71
kmalloc-8                 6492     9981     5624  99  97
:0000768                   258     7174     6931  58  15

So the skbuff_fclone_cache is of highest importance for the tbench load.
Pretty high load on the 192 sized slab. Look for the aliases

slabinfo -a | grep 000192
:0000192     <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP
	request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili

Likely skbuff_head_cache.


Looking into the statistics of the skbuff_fclone_cache is possible through

slabinfo skbuff_fclone_cache	->-r option implied if cache name is mentioned


.... Usual output ...

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath             111953360 111946981  99  99
Slowpath                 1044     7423   0   0
Page Alloc                272      264   0   0
Add partial                25      325   0   0
Remove partial             86      264   0   0
RemoteObj/SlabFrozen      350     4832   0   0
Total                111954404 111954404

Flushes       49 Refill        0
Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%)

Looks good because the fastpath is overwhelmingly taken.


skbuff_head_cache:

Slab Perf Counter       Alloc     Free %Al %Fr
--------------------------------------------------
Fastpath              5297262  5259882  99  99
Slowpath                 4477    39586   0   0
Page Alloc                937      824   0   0
Add partial                 0     2515   0   0
Remove partial           1691      824   0   0
RemoteObj/SlabFrozen     2621     9684   0   0
Total                 5301739  5299468

Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%)


Descriptions of the output:

Total:		The total number of allocation and frees that occurred for a
		slab

Fastpath:	The number of allocations/frees that used the fastpath.

Slowpath:	Other allocations

Page Alloc:	Number of calls to the page allocator as a result of slowpath
		processing

Add Partial:	Number of slabs added to the partial list through free or
		alloc (occurs during cpuslab flushes)

Remove Partial:	Number of slabs removed from the partial list as a result of
		allocations retrieving a partial slab or by a free freeing
		the last object of a slab.

RemoteObj/Froz:	How many times were remotely freed object encountered when a
		slab was about to be deactivated. Frozen: How many times was
		free able to skip list processing because the slab was in use
		as the cpuslab of another processor.

Flushes:	Number of times the cpuslab was flushed on request
		(kmem_cache_shrink, may result from races in __slab_alloc)

Refill:		Number of times we were able to refill the cpuslab from
		remotely freed objects for the same slab.

Deactivate:	Statistics how slabs were deactivated. Shows how they were
		put onto the partial list.

In general fastpath is very good. Slowpath without partial list processing is
also desirable. Any touching of partial list uses node specific locks which
may potentially cause list lock contention.
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      8ff12cfc
    • Christoph Lameter's avatar
      SLUB: Alternate fast paths using cmpxchg_local · 1f84260c
      Christoph Lameter authored 
      Provide an alternate implementation of the SLUB fast paths for alloc
and free using cmpxchg_local. The cmpxchg_local fast path is selected
for arches that have CONFIG_FAST_CMPXCHG_LOCAL set. An arch should only
set CONFIG_FAST_CMPXCHG_LOCAL if the cmpxchg_local is faster than an
interrupt enable/disable sequence. This is known to be true for both
x86 platforms so set FAST_CMPXCHG_LOCAL for both arches.

Currently another requirement for the fastpath is that the kernel is
compiled without preemption. The restriction will go away with the
introduction of a new per cpu allocator and new per cpu operations.

The advantages of a cmpxchg_local based fast path are:

1. Potentially lower cycle count (30%-60% faster)

2. There is no need to disable and enable interrupts on the fast path.
   Currently interrupts have to be disabled and enabled on every
   slab operation. This is likely avoiding a significant percentage
   of interrupt off / on sequences in the kernel.

3. The disposal of freed slabs can occur with interrupts enabled.

The alternate path is realized using #ifdef's. Several attempts to do the
same with macros and inline functions resulted in a mess (in particular due
to the strange way that local_interrupt_save() handles its argument and due
to the need to define macros/functions that sometimes disable interrupts
and sometimes do something else).

[clameter: Stripped preempt bits and disabled fastpath if preempt is enabled]
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
Reviewed-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      1f84260c
    • Christoph Lameter's avatar
      SLUB: Use unique end pointer for each slab page. · 683d0baa
      Christoph Lameter authored 
      We use a NULL pointer on freelists to signal that there are no more objects.
However the NULL pointers of all slabs match in contrast to the pointers to
the real objects which are in different ranges for different slab pages.

Change the end pointer to be a pointer to the first object and set bit 0.
Every slab will then have a different end pointer. This is necessary to ensure
that end markers can be matched to the source slab during cmpxchg_local.

Bring back the use of the mapping field by SLUB since we would otherwise have
to call a relatively expensive function page_address() in __slab_alloc().  Use
of the mapping field allows avoiding a call to page_address() in various other
functions as well.

There is no need to change the page_mapping() function since bit 0 is set on
the mapping as also for anonymous pages.  page_mapping(slab_page) will
therefore still return NULL although the mapping field is overloaded.
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      683d0baa
    • Christoph Lameter's avatar
      SLUB: Deal with annoying gcc warning on kfree() · 5bb983b0
      Christoph Lameter authored 
      gcc 4.2 spits out an annoying warning if one casts a const void *
pointer to a void * pointer. No warning is generated if the
conversion is done through an assignment.
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      5bb983b0
  3. 07 Feb, 2008 34 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7