- 16 Apr, 2014 8 commits
-
-
Ramkumar Ramachandra authored
Signed-off-by:
Ramkumar Ramachandra <artagnon@gmail.com> Acked-by:
David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1394853474-31019-2-git-send-email-artagnon@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
Now perf report will show absolute percentage on filter entries by default. Suggested-by:
Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-8-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
Add 'F' hotkey to toggle relative and absolute percentage of filtered entries. Suggested-by:
-
Namhyung Kim authored
Add hist.percentage option for setting default value of the symbol_conf.filter_relative. It affects the output of various perf commands (like perf report, top and diff) only if filter(s) applied. An user can write .perfconfig file like below to show absolute percentage of filtered entries by default: $ cat ~/.perfconfig [hist] percentage = absolute And it can be changed through command line: $ perf report --percentage relative Signed-off-by:
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by:
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". Move the parser callback function into a common location since it's used by multiple commands now. For more information, please see previous commit same thing done to "perf report". Signed-off-by:
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". "relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied. $ perf report -s comm # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc 6.11% as 4.35% sh 4.14% make 1.13% fixdep ... $ perf report -s comm -c cc1,gcc --percentage absolute # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative # Overhead Command # ........ ............ # 90.69% cc1 9.31% gcc Note that it has zero effect if no filter was applied. Suggested-by:Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Namhyung Kim authored
When filtering by thread, dso or symbol on TUI it also update total period so that the output shows different result than no filter - the percentage changed to relative to filtered entries only. Sometimes this is not desired since users might expect same results with filter. So new filtered_* fields to hists->stats to count them separately. They'll be controlled/used by user later. Signed-off-by:
-
- 14 Apr, 2014 15 commits
-
-
Ingo Molnar authored
Conflicts: tools/perf/bench/numa.c Pull perf fixes from Jiri Olsa. Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Pick up the latest fixes. Signed-off-by: -
Andi Kleen authored
perf stat did initialize the stats structure used to compute stddev etc. incorrectly. It merely zeroes it. But one member (min) needs to be set to a non zero value. This causes min to be not computed at all. Call init_stats() correctly. It doesn't matter for stat currently because it doesn't use min, but it's still better to do it correctly. The other users of statistics are already correct. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Ramkumar Ramachandra authored
Currently, $ perf bench numa mem errors out with usage information. To make this more user-friendly, let us provide a minimum set of default values required for a test run. As an added bonus, $ perf bench all now goes all the way to completion. Signed-off-by:
-
Ramkumar Ramachandra authored
At the end of $ perf bench all the program segfaults because it attempts to dereference a NULL pointer. Fix this fault. Signed-off-by:
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Namhyung Kim authored
The dwarf_getcfi() only checks .debug_frame section for CFI, but as most binaries only have .eh_frame it'd return NULL and it makes some variables inaccessible. Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and add probe to more variables. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Masami Hiramatsu authored
As Namhyung reported(https://lkml.org/lkml/2014/4/1/89), current perf-probe -L option doesn't handle errors in line-range searching correctly. It causes a SEGV if an error occured in the line-range searching. ---- $ perf probe -x ./perf -v -L map__load Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf fname: util/map.c, lineno:153 New line range: 153 to 2147483647 path: (null) Segmentation fault (core dumped) ---- This is because line_range_inline_cb() ignores errors from find_line_range_by_line() which means that lr->path is already freed on the error path in find_line_range_by_line(). As a result, get_real_path() accesses the lr->path and it causes a NULL pointer exception. This fixes line_range_inline_cb() to handle the error correctly, and report it to the caller. Anyway, this just fixes a possible SEGV bug, Namhyung's patch is also required. Reported-by:
-
Namhyung Kim authored
The commit 5a62257a ("perf probe: Replace line_list with intlist") replaced line_list to intlist but it has a problem that if a same line was added again, it'd return -EEXIST rather than 1. Since line_range_walk_cb() only checks the result being negative, it resulted in failure or segfault sometimes. Signed-off-by:
-
Ramkumar Ramachandra authored
The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is defined. This means that under a normal setup, $ make NO_LIBUNWIND=1 won't automatically pick up libdw. Fix this. Signed-off-by:
Jean Pihet <jean.pihet@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Leaving ghostprotocols.net for old networking stuff. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-jott6d40nkjjc3vvh3vw53lp@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
I.e. do the same as when NO_LIBELF is explicitely passed in the 'make' command line, fixing this: Auto-detecting system features: ... dwarf: [ OFF ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... DWARF post unwind library: libdw <SNIP> CC /tmp/build/perf/util/symbol-minimal.o CC /tmp/build/perf/util/unwind-libdw.o arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory compilation terminated. CC /tmp/build/perf/tests/keep-tracking.o util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory compilation terminated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.orgSigned-off-by: -
Namhyung Kim authored
The patch 3a3ffa2e ("tools lib traceevent: Report better error message on bad function args") added the error message but it seems there's no reason to call warning() directly. So change it to do_warning_event() to provide event information too. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1395192174-26273-2-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
It's sometimes useful to know where the parse failure was occurred. Add do_warning_event() macro to see the failing event. It now shows the messages like below: $ perf test 5 5: parse events tests : Warning: [kvmmmu:kvm_mmu_get_page] bad op token { Warning: [kvmmmu:kvm_mmu_sync_page] bad op token { Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token { Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token { Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined Warning: [xen:xen_mmu_ptep_modify_prot_commit] function sizeof not defined Warning: [xen:xen_mmu_ptep_modify_prot_start] function sizeof not defined Warning: [xen:xen_mmu_set_pgd] function sizeof not defined Warning: [xen:xen_mmu_set_pud] function sizeof not defined Warning: [xen:xen_mmu_set_pmd] function sizeof not defined ... Signed-off-by: -
Namhyung Kim authored
On perf top, the -s option is used for --sort, but the man page contains invalid documentation of -s option for --sym-annotate. Signed-off-by:
-
- 13 Apr, 2014 12 commits
-
-
Linus Torvalds authored
-
Geert Uytterhoeven authored
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate -
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: "Here is the non-critical part of kbuild: - One bogus coccinelle check removed, one check fixed not to suggest the obsolete PTR_RET macro - scripts/tags.sh does not index the generated *.mod.c files - new objdiff tool to list differences between two versions of an object file - A fix for scripts/bootgraph.pl" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/coccinelle: Use PTR_ERR_OR_ZERO scripts/bootgraph.pl: Add graphic header scripts: objdiff: detect object code changes between two commits Coccicheck: Remove memcpy to struct assignment test scripts/tags.sh: Ignore *.mod.c -
Mikulas Patocka authored
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Paul Mackerras authored
Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Davidlohr Bueso authored
Commits 11d4616b ("futex: revert back to the explicit waiter counting code") and 69cd9eba ("futex: avoid race between requeue and wake") changed some of the finer details of how we think about futexes. One was a late fix and the other a consequence of overlooking the whole requeuing logic. The first change caused our documentation to be incorrect, and the second made us aware that we need to explicitly add more details to it. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ... -
Linus Torvalds authored
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
-
Linus Torvalds authored
Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc cleanups from Ohad Ben-Cohen: "Several remoteproc cleanup patches coming from Jingoo Han, Julia Lawall and Uwe Kleine-König" * tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc/ste_modem: staticize local symbols remoteproc/davinci: simplify use of devm_ioremap_resource remoteproc/davinci: drop needless devm_clk_put
-
git://git.linuxfoundation.org/llvmlinux/kernelLinus Torvalds authored
Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
-
- 12 Apr, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the target pending updates for v3.15-rc1. Apologies in advance for waiting until the second to last day of the merge window to send these out. The highlights this round include: - iser-target support for T10 PI (DIF) offloads (Sagi + Or) - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung) - Pass in transport supported PI at session initialization (Sagi + MKP + nab) - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi) - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab) - Fix tcm_fc use-after-free of ft_tpg (Andy Grover) - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn) Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI metadata into KVM guest have been left-out for now, as there where a few comments from MST + Paolo that where not able to be addressed in time for v3.15. Please expect this feature for v3.16-rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits) ib_srpt: Use correct ib_sg_dma primitives target/tcm_fc: Rename ft_tport_create to ft_tport_get target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn target/tcm_fc: Rename structs and list members for clarity target/tcm_fc: Limit to 1 TPG per wwn target/tcm_fc: Don't export ft_lport_list target/tcm_fc: Fix use-after-free of ft_tpg target: Add check to prevent Abort Task from aborting itself target: Enable READ_STRIP emulation in target_complete_ok_work target/sbc: Add sbc_dif_read_strip software emulation target: Enable WRITE_INSERT emulation in target_execute_cmd target/sbc: Add sbc_dif_generate software emulation target/sbc: Only expose PI read_cap16 bits when supported by fabric target/spc: Only expose PI mode page bits when supported by fabric target/spc: Only expose PI inquiry bits when supported by fabric target: Pass in transport supported PI at session initialization target/iblock: Fix double bioset_integrity_free bug Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist target/rd: T10-Dif: RAM disk is allocating more space than required. iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "A series of bug fix patches for v3.15-rc1. Most are just driver fixes. There are some changes at remote controller core level, fixing some definitions on a new API added for Kernel v3.15. It also adds the missing include at include/uapi/linux/v4l2-common.h, to allow its compilation on userspace, as pointed by you" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits) [media] gpsca: remove the risk of a division by zero [media] stk1160: warrant a NUL terminated string [media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers [media] v4l: ti-vpe: Set correct field parameter for output and capture buffers [media] v4l: ti-vpe: zero out reserved fields in try_fmt [media] v4l: ti-vpe: Fix initial configuration queue data [media] v4l: ti-vpe: Use correct bus_info name for the device in querycap [media] v4l: ti-vpe: report correct capabilities in querycap [media] v4l: ti-vpe: Allow usage of smaller images [media] v4l: ti-vpe: Use video_device_release_empty [media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs [media] lgdt3305: include sleep functionality in lgdt3304_ops [media] drx-j: use customise option correctly [media] m88rs2000: fix sparse static warnings [media] r820t: fix size and init values [media] rc-core: remove generic scancode filter [media] rc-core: split dev->s_filter [media] rc-core: do not change 32bit NEC scancode format for now [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03 [media] xc2028: add missing break to switch ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull PCIe non-transparent bridge fixes and features from Jon Mason: "NTB driver bug fixes to address issues in list traversal, skb leak in ntb_netdev, a typo, and a leak of msix entries in the error path. Clean ups of the event handling logic, as well as a overall style cleanup. Finally, the driver was converted to use the new pci_enable_msix_range logic (and the refactoring to go along with it)" * tag 'ntb-3.15' of git://github.com/jonmason/ntb: ntb: Use pci_enable_msix_range() instead of pci_enable_msix() ntb: Split ntb_setup_msix() into separate BWD/SNB routines ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs NTB: Code Style Clean-up NTB: client event cleanup ntb: Fix leakage of ntb_device::msix_entries[] array NTB: Fix typo in setting one translation register ntb_netdev: Fix skb free issue in open ntb_netdev: Fix list_for_each_entry exit issue
-
Linus Torvalds authored
The vfs merge caused a latent bug to show up: In file included from fs/ceph/super.h:4:0, from fs/ceph/ioctl.c:3: include/linux/ceph/ceph_debug.h:4:0: warning: "pr_fmt" redefined [enabled by default] #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ^ In file included from include/linux/kernel.h:13:0, from include/linux/uio.h:12, from include/linux/socket.h:7, from include/uapi/linux/in.h:22, from include/linux/in.h:23, from fs/ceph/ioctl.c:1: include/linux/printk.h:214:0: note: this is the location of the previous definition #define pr_fmt(fmt) fmt ^ where the reason is that <linux/ceph_debug.h> is included much too late for the "pr_fmt()" define. The include of <linux/ceph_debug.h> needs to be the first include in the file, but fs/ceph/ioctl.c had for some reason missed that, and it wasn't noticeable until some unrelated header file changes brought in an indirect earlier include of <linux/kernel.h>. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
-
