Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for 5.6-rc7

  Nothing major here, just resolutions for some reported problems:
   - iio bugfixes for a number of different drivers
   - greybus loopback_test fixes
   - wfx driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
  staging: greybus: loopback_test: fix potential path truncations
  staging: greybus: loopback_test: fix potential path truncation
  staging: greybus: loopback_test: fix poll-mask build breakage
  staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
  staging: wfx: fix RCU usage in wfx_join_finalize()
  staging: wfx: make warning about pending frame less scary
  staging: wfx: fix lines ending with a comma instead of a semicolon
  staging: wfx: fix warning about freeing in-use mutex during device unregister
  staging/speakup: fix get_word non-space look-ahead
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
  driver fix thrown in for good measure as well.

  These fixes are:
   - new device ids for usb-serial drivers
   - thunderbolt error code fix
   - xhci driver fixes
   - typec fixes
   - cdc-acm driver fixes
   - chipidea driver fix
   - more USB quirks added for devices that need them.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix rounding error in TIOCSSERIAL
  USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
  usb: chipidea: udc: fix sleeping function called from invalid context
  USB: serial: pl2303: add device-id for HP LD381
  USB: serial: option: add ME910G1 ECM composition 0x110b
  usb: host: xhci-plat: add a shutdown
  usb: typec: ucsi: displayport: Fix a potential race during registration
  usb: typec: ucsi: displayport: Fix NULL pointer dereference
  USB: Disable LPM on WD19's Realtek Hub
  usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  xhci: Do not open code __print_symbolic() in xhci trace events
  thunderbolt: Fix error code in tb_port_is_width_supported()

Pull tty fixes from Greg KH:
 "Here are three small tty_io bugfixes for reported issues that Eric has
  resolved for 5.6-rc7

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix compat TIOCGSERIAL checking wrong function ptr
  tty: fix compat TIOCGSERIAL leaking uninitialized memory
  tty: drop outdated comments about release_tty() locking

Pull sound fixes from Takashi Iwai:
 "A few fixes covering the issues reported by syzkaller, a couple of
  fixes for the MIDI decoding bug, and a few usual HD-audio quirks.

  Some of them are about ALSA core stuff, but they are small fixes just
  for corner cases, and nothing thrilling"

* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
  ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
  ALSA: seq: oss: Fix running status after receiving sysex
  ALSA: seq: virmidi: Fix running status after receiving sysex
  ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
  ALSA: hda/realtek: Fix pop noise on ALC225
  ALSA: line6: Fix endless MIDI read loop
  ALSA: pcm: oss: Avoid plugin buffer overflow

Pull drm fixes from Dave Airlie:
 "Hope you are well hiding out above the garage. A few amdgpu changes
  but nothing too major. I've had a wisdom tooth out this week so
  haven't been to on top of things, but all seems good.

  core:
   - fix lease warning

  i915:
   - Track active elements during dequeue
   - Fix failure to handle all MCR ranges
   - Revert unnecessary workaround

  amdgpu:
   - Pageflip fix
   - VCN clockgating fixes
   - GPR debugfs fix for umr
   - GPU reset fix
   - eDP fix for MBP
   - DCN2.x fix

  dw-hdmi:
   - fix AVI frame colorimetry

  komeda:
   - fix compiler warning

  bochs:
   - downgrade a binding failure to a warning"

* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix pageflip event race condition for DCN.
  drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
  drm/amdgpu: fix typo for vcn2/jpeg2 idle check
  drm/amdgpu: fix typo for vcn1 idle check
  drm/lease: fix WARNING in idr_destroy
  drm/i915: Handle all MCR ranges
  Revert "drm/i915/tgl: Add extra hdc flush workaround"
  drm/i915/execlists: Track active elements during dequeue
  drm/bochs: downgrade pci_request_region failure from error to warning
  drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
  drm/amdgpu: add fbdev suspend/resume on gpu reset
  drm/amd/amdgpu: Fix GPR read from debugfs (v2)
  drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
  drm/komeda: mark PM functions as __maybe_unused
  drm/bridge: dw-hdmi: fix AVI frame colorimetry

Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-03-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-19:

amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com

Commit '16f17eda ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.

The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:

prepare_flip_isr():

1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.

--> Deadline for surface address regs double-buffering passes on
    target pipe.

4. dc_commit_updates_for_stream() MMIO programs the new pageflip
   into hw, but too late for current vblank.

=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
   in current vblank due to missing the double-buffering deadline
   by a tiny bit.

5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
   dm_dcn_crtc_high_irq() gets called.

6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
   pageflip has been completed/will complete in this vblank and
   sends out pageflip completion event to userspace and resets
   pflip_status = AMDGPU_FLIP_NONE.

=> Flip completion event sent out one vblank too early.

This behaviour has been observed during my testing with measurement
hardware a couple of time.

The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.

The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.

Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.

Fixes: 16f17eda ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull MMC fixes from Ulf Hansson:

 - rtsx_pci: Fix support for some various speed modes

 - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2

 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier

 - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10

 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320

* tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
  mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
  mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
  mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)
  mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

Pull cifs fixes from Steve French:
 "Three small smb3 fixes, two for stable"

* tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: fiemap: do not return EINVAL if get nothing
  CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
  cifs: potential unintitliazed error code in cifs_getattr()

Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix __uint128_t capability test in Kconfig when GCC that defaults to
   32-bit is used to build the 64-bit kernel

 - suppress new noisy Clang warnings -Wpointer-to-enum-cast

 - move the namespace field in Module.symvers for the backward
   compatibility reason for the depmod tool

 - use available compression for initramdisk when INTRAMFS_SOURCE is
   defined, which was the original behavior

 - fix modpost to handle correct large section numbers when it refers to
   modversion CRCs and module namespaces

 - fix comments and documents

* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/kallsyms: fix wrong kallsyms_relative_base
  modpost: Get proper section index by get_secindex() instead of st_shndx
  initramfs: restore default compression behavior
  modpost: move the namespace field in Module.symvers last
  kbuild: Disable -Wpointer-to-enum-cast
  kbuild: doc: fix references to other documents
  int128: fix __uint128_t compiler test in Kconfig
  kconfig: introduce m32-flag and m64-flag
  kbuild: Fix inconsistent comment

I have hit the following build error:

  armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
  rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes: 94c01ab6 ("rtc: add MAX8907 RTC driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is the code in the read_symbol function in 'scripts/kallsyms.c':

	if (is_ignored_symbol(name, type))
		return NULL;

	/* Ignore most absolute/undefined (?) symbols. */
	if (strcmp(name, "_text") == 0)
		_text = addr;

But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.

It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):

	if (base_relative) {
		output_label("kallsyms_relative_base");
		output_address(relative_base);
		printf("\n");
	}

Because the output_address function uses the _text variable.

So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:

 Call Trace:
 [aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
 [aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
 [aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
 [aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
 [aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010

The right stack trace:

 Call Trace:
 [aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
 [aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
 [aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
 [aa095f28] [80002ed0] kernel_init+0x14/0x124
 [aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c

[masahiroy@kernel.org:

This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a

The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge tag 'drm-misc-fixes-2020-03-18-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- drm/lease: fix WARNING in idr_destroy
- Fix AVI frame colorimetry in the dw-hdmi bridge.
- Fix compiler warning in komeda by annotating functions as __maybe_unused.
- Downgrade bochs pci_request_region failure from error to warning to
  workaround firmware fb.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com

fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is measurable performance impact in some synthetic tests due to
commit 6d390e4b (locks: fix a potential use-after-free problem when
wakeup a waiter). Fix the race condition instead by clearing the
fl_blocker pointer after the wake_up, using explicit acquire/release
semantics.

This does mean that we can no longer use the clearing of fl_blocker as
the wait condition, so switch the waiters over to checking whether the
fl_blocked_member list_head is empty.
Reviewed-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Fixes: 6d390e4b (locks: fix a potential use-after-free problem when wakeup a waiter)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535.  In this case, we need to get proper section index
by .symtab_shndx section.

Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.

Fixes: 56067812 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbb ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d ("mm: slub:
add missing TID bump..").

The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.

Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).

But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu
freelist of length M, and N > M > 0, it will first remove the M elements
from the percpu freelist, then call ___slab_alloc() to allocate the next
element and repopulate the percpu freelist. ___slab_alloc() can re-enable
IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc()
to properly commit the freelist head change.

Fix it by unconditionally bumping c->tid when entering the slowpath.

Cc: stable@vger.kernel.org
Fixes: ebe909e0 ("slub: improve bulk alloc strategy")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
    ->drm_master_destroy
            ->idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com

Commit 77654350 ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
checking for the presence of the ->set_serial function pointer rather
than ->get_serial.  This appears to be a copy-and-paste error, since
->get_serial is the function pointer that is called as well as the
pointer that is checked by the non-compat version of TIOCGSERIAL.

Fix this by checking the correct function pointer.

Fixes: 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 77654350 ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
copying a whole 'serial_struct32' to userspace rather than individual
fields, but failed to initialize all padding and fields -- namely the
hole after the 'iomem_reg_shift' field, and the 'reserved' field.

Fix this by initializing the struct to zero.

[v2: use sizeof, and convert the adjacent line for consistency.]

Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com
Fixes: 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current version of the TTY code unlocks the tty_struct(s) before
release_tty() rather than after.  Moreover, tty_unlock_pair() no longer
exists.  Thus, remove the outdated comments regarding tty_unlock_pair().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200224073359.292795-1-ebiggers@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 5.6 cycle.

* adxl372
  - Fix marking of buffered values as big endian.
* ak8974
  - Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
  - Fix differential mode by ensuring configuration set correctly.
* ping
  - Use the write sensor type for of_ping_match table.
* sps30
  - Kconfig build dependency fix.
* st-sensors
  - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
  - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
  - Make sure master mode is disabled when stopping.
* vcnl400
  - Update some sampling periods based on new docs.

* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Merge tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.6-rc7

Here are a couple of new device ids for 5.6-rc.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: pl2303: add device-id for HP LD381
  USB: serial: option: add ME910G1 ECM composition 0x110b

By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
   port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69

With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.

When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919

Fixes: ba2d8ce9 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:

[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout

This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.

Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).

This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The code calls pm_runtime_get_sync with irq disabled, it causes below
warning:

BUG: sleeping function called from invalid context at
wer/runtime.c:1075
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid:
er/u8:1
CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted
20200304-00181-gbebfd2a5be98 #1588
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: ci_otg ci_otg_work
[<c010e8bd>] (unwind_backtrace) from [<c010a315>]
1/0x14)
[<c010a315>] (show_stack) from [<c0987d29>]
5/0x94)
[<c0987d29>] (dump_stack) from [<c013e77f>]
+0xeb/0x118)
[<c013e77f>] (___might_sleep) from [<c052fa1d>]
esume+0x75/0x78)
[<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>]
0x23/0x74)
[<c0627a33>] (ci_udc_pullup) from [<c062fb93>]
nect+0x2b/0xcc)
[<c062fb93>] (usb_gadget_connect) from [<c062769d>]
_connect+0x59/0x104)
[<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>]
ssion+0x43/0x48)
[<c062778b>] (ci_udc_vbus_session) from [<c062f997>]
s_connect+0x17/0x9c)
[<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>]
bd/0x128)
[<c062634d>] (ci_otg_work) from [<c0134719>]
rk+0x149/0x404)
[<c0134719>] (process_one_work) from [<c0134acb>]
0xf7/0x3bc)
[<c0134acb>] (worker_thread) from [<c0139433>]
x118)
[<c0139433>] (kthread) from [<c01010bd>]
(ret_from_fork+0x11/0x34)
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Cc: <stable@vger.kernel.org> #v5.5
Fixes: 72dc8df7 ("usb: chipidea: udc: protect usb interrupt enable")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.

Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>

The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...

Open files: 0 total (local), 1 open on server
                             ^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.

In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.

I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.

I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Smatch complains that "rc" could be uninitialized.

    fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'.

Changing it to "return 0;" improves readability as well.

Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>

A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Acer desktop X2660G with ALC662 can't detect the headset microphone
until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-2-jian-hong@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull HID fixes from Jiri Kosina:

 - string buffer formatting fixes in picolcd and sensor drivers, from
   Takashi Iwai

 - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: add ALWAYS_POLL quirk to lenovo pixart mouse
  HID: google: add moonball USB id
  HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
  HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow

This device was added to the stand-alone driver on github.
Add it to the staging driver as well.

Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7Signed-off-by: Michael Straube <straube.linux@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.

	snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);

	snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
		 t->sysfs_prefix, d->name);

	snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
		 t->debugfs_prefix, d->name);

Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.

Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.

Fixes: 6b0658f6 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>