- 10 Oct, 2007 1 commit
-
-
Robin Getz authored
now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by:
Robin Getz <robin.getz@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com>
-
- 03 Aug, 2007 2 commits
-
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
- 05 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Roy Huang authored
Signed-off-by:
Roy Huang <roy.huang@analog.com> Signed-off-by:
-
- 25 Jul, 2007 1 commit
-
-
Robin Getz authored
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by:
-
- 03 Aug, 2007 1 commit
-
-
Robin Getz authored
Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by:
-
- 11 Oct, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 03 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 25 Jul, 2007 1 commit
-
-
Mike Frysinger authored
Signed-off-by:
-
- 24 Jul, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Sigend-off-by:
-
- 05 Aug, 2007 1 commit
-
-
Bryan Wu authored
Cc: Andy Liu <yjhsou@gmail.com> Signed-off-by:
-
- 25 Jul, 2007 1 commit
-
-
Bryan Wu authored
Signed-off-by:
-
- 24 Jul, 2007 2 commits
-
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 24 Jul, 2007 2 commits
-
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
- 05 Aug, 2007 1 commit
-
-
Mike Frysinger authored
Signed-off-by:
-
- 03 Aug, 2007 2 commits
-
-
Robin Getz authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
- 25 Jul, 2007 5 commits
-
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds rather than __builtin_bfin_[cs]sync() Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by:
-
- 24 Jul, 2007 1 commit
-
-
Mike Frysinger authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Bryan Wu authored
Signed-off-by:
-
- 09 Oct, 2007 7 commits
-
-
Linus Torvalds authored
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
-
Trond Myklebust authored
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Florian Fainelli authored
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Giuseppe Sacco authored
Signed-off-by:
Giuseppe Sacco <eppesuig@debian.org> Signed-off-by:
-
- 08 Oct, 2007 4 commits
-
-
Maarten Bressers authored
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b1287, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by:Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Karsten Keil authored
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
-
Yan Zheng authored
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
