- 16 Nov, 2015 40 commits
-
-
Dean Luick authored
Use the one-shot LCB write implemented in the 8051 firmware. This speeds up 8051 LCB writes by 2x. Use old method for older firmwares. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ignacio Hernandez authored
Changed the order in which diagnostics messages are printed, taking into account the cases where the errors are handled in rcv_hdrerr() and no further message is needed to report. Reviewed-by:
Mark Debbage <mark.debbage@intel.com> Reviewed-by:
Arthur Kepner <arthur.kepner@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Ignacio Hernandez <ignacio.hernandez@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
opaportconfig ledon fails with error message due to port number being checked in the attr modifier. This change removes the check for the port number in AttrMod, so the P field is ignored. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Dean Luick authored
When looking for or validating a user device, only use devices that are currently active. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Jareer Abdel-Qader authored
During driver load the thermal sensor needs to be reset prior to initialization of the sensor. This prevents a possible sensor lock up which can cause the wrong temperature value to be reported. This fix leads to remove disabling thermal polling from reset_asic_csrs() function. Reviewed by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Jareer Abdel-Qader <jareer.h.abdel-qader@intel.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Dean Luick authored
B0 dual port parts require the SBus firmware to always be downloaded. Remove reset of the SBus Master spico. It is not necessary since the SBus firmware download already does that. Reviewed-by:
-
Vennila Megavannan authored
Some BIOS implementations turn off extended tags in DevCtl (a RW field) even though it was originally set and is advertised in DevCap Fix is to set it in the driver Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by:
-
Easwar Hariharan authored
The FLR on driver load asserts the QSFP reset pin and the driver does not deassert it after. This patch allows the external QSFP cable to exit reset by writing 1 to all the QSFP pins. Reviewed-by:
-
Sebastian Sanchez authored
Replacing dd_dev_info() for hfi1_cdbg() to avoid generating syslog output for every context that is open by PSM. Reviewed-by:
-
Markus Elfring authored
The module_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_EnqueueBuffer to dim_enqueue_buffer to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_EnqueueBuffer> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:877: Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_GetChannelState to dim_get_channel_state to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_GetChannelState> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:865: Signed-off-by:
-
Chaehyun Lim authored
The second argument name of DIM_GetChannelState declaration changes from dim_ch_state_ptr to state_ptr. The DIM_GetChannelState declaration and definition has same argument name as state_ptr. Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_ServiceChannel to dim_service_channel to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_ServiceChannel> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:857: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_ServiceIrq to dim_service_irq to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_ServiceIrq> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:819: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_DestroyChannel to dim_destroy_channel to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_DestroyChannel> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:806: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_InitSync to dim_init_sync to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_InitSync> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:781: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_InitIsoc to dim_init_isoc to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_InitIsoc> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:756: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_InitAsync to dim_init_async to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_InitAsync> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:749: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_InitControl to dim_init_control to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_InitControl> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:742: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_NormSyncBufferSize to dim_norm_sync_buffer_size to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_NormSyncBufferSize> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:734: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_NormIsocBufferSize to dim_norm_isoc_buffer_size to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_NormIsocBufferSize> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:720: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_NormCtrlAsyncBufferSize to dim_norm_ctrl_async_buffer_size to avoid camelcase found by checkpatch CHECK: Avoid CamelCase: <DIM_NormCtrlAsyncBufferSize> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:709: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIMCB_IoRead to dimcb_io_read to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIMCB_IoRead> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:157: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIMCB_IoWrite to dimcb_io_write to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIMCB_IoWrite> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:154: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIMCB_OnError to dimcb_on_error to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIMCB_OnError> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:77: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_GetLockState to dim_get_lock_state to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_GetLockState> FILE: drivers/staging/most/hdm-dim2/dim2_hdm.c:131: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_DetachBuffers to dim_detach_buffers to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_DetachBuffers> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:886: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_Shutdown to dim_shutdown to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_Shutdown> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:676: Signed-off-by:
-
Chaehyun Lim authored
This patch renames DIM_Startup to dim_startup to avoid camelcase found by checkpatch. CHECK: Avoid CamelCase: <DIM_Startup> FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:653: Signed-off-by:
-
Chaehyun Lim authored
This patch adds space around '<<' found by checkpatch. CHECK: spaces preferred around that '<<' (ctx:VxV) FILE: drivers/staging/most/hdm-dim2/dim2_reg.h:69: Signed-off-by:
-
Chaehyun Lim authored
This patch removes blank line after an open brace found by checkpatch. CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by: -
Chaehyun Lim authored
This patch removes multiple blank lines found by checkpatch. CHECK: Please don't use multiple blank lines Signed-off-by:
-
Ivan Safonov authored
malloc error handling moved into one place. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Signed-off-by:
-
Ivan Safonov authored
goto is not needed here. Signed-off-by:
-
Ivan Safonov authored
IS_* and GET_CVID_* macros have not been used. Signed-off-by:
-
Ivan Safonov authored
IS_* macros (except one) occur only once. Signed-off-by:
-
Ivan Safonov authored
The range of elements to fill with zeros is determined by using a roundup macro Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ivan Safonov authored
This name is better suited for this variable. Signed-off-by:
-
Ivan Safonov authored
This name is better suited for this variable. Signed-off-by:
-
