Skip to content

L
linux
Switch branch/tag
  1. 22 Sep, 2020 3 commits
    • Bodo Stroesser's avatar
      scsi: target: tcmu: Optimize scatter_data_area() · 3c9a7c58
      Bodo Stroesser authored 
      scatter_data_area() has two purposes:

 1) Create the iovs for the data area buffer of a SCSI cmd.

 2) If there is data in DMA_TO_DEVICE direction, copy
    the data from sg_list to data area buffer.

Both are done in a common loop.

In case of DMA_FROM_DEVICE data transfer, scatter_data_area() is called
with parameter copy_data = false. But this flag is just used to skip
memcpy() for data, while radix_tree_lookup still is called for every dbi of
the area area buffer, and kmap and kunmap are called for every page from
sg_list and data_area as well as flush_dcache_page() for the data area
pages.  Since the only thing to do with copy_data = false would be to set
up the iovs, this is a noticeable overhead.  Rework the iov creation in the
main loop of scatter_data_area() providing the new function
new_block_to_iov().  Based on this, create the short new function
tcmu_setup_iovs() that only writes the iovs with no overhead.  This new
function is now called instead of scatter_data_area() for bidi buffers and
for data buffers in those cases where memcpy() would have been skipped.

Link: https://lore.kernel.org/r/20200910155041.17654-4-bstroesser@ts.fujitsu.comAcked-by: default avatarMike Christie <michael.christie@oracle.com>
Signed-off-by: default avatarBodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      3c9a7c58
    • Bodo Stroesser's avatar
      scsi: target: tcmu: Optimize queue_cmd_ring() · 7e98905e
      Bodo Stroesser authored 
      queue_cmd_ring() needs to check whether there is enough space in cmd ring
and data area for the cmd to queue.

Currently the sequence is:

 1) Calculate size the cmd will occupy on the ring based on estimation of
    needed iovs.

 2) Check whether there is enough space on the ring based on size from 1)

 3) Allocate buffers in data area.

 4) Calculate number of iovs the command really needs while copying
    incoming data (if any) to data area.

 5) Re-calculate real size of cmd on ring based on real number of iovs.

 6) Set up possible padding and cmd on the ring.

Step 1) must not underestimate the cmd size so use max possible number of
iovs for the given I/O data size. The resulting overestimation can be
really high so this sequence is not ideal. The earliest the real number of
iovs can be calculated is after data buffer allocation. Therefore rework
the code to implement the following sequence:

 A) Allocate buffers on data area and calculate number of necessary iovs
    during this.

 B) Calculate real size of cmd on ring based on number of iovs.

 C) Check whether there is enough space on the ring.

 D) Set up possible padding and cmd on the ring.

The new sequence enforces the split of new function tcmu_alloc_data_space()
from is_ring_space_avail(). Using this function, change queue_cmd_ring()
according to the new sequence.

Change routines called by tcmu_alloc_data_space() to allow calculating and
returning the iov count. Remove counting of iovs in scatter_data_area().

Link: https://lore.kernel.org/r/20200910155041.17654-3-bstroesser@ts.fujitsu.comAcked-by: default avatarMike Christie <michael.christie@oracle.com>
Signed-off-by: default avatarBodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      7e98905e
    • Bodo Stroesser's avatar
      scsi: target: tcmu: Join tcmu_cmd_get_data_length() and tcmu_cmd_get_block_cnt() · 52ef2743
      Bodo Stroesser authored 
      Simplify code by joining tcmu_cmd_get_data_length() and
tcmu_cmd_get_block_cnt() into tcmu_cmd_set_block_cnts().  The new function
sets tcmu_cmd->dbi_cnt and also the new field tcmu_cmd->dbi_bidi_cnt which
is needed for further enhancements in following patches.  Simplify some
code by using tcmu_cmd->dbi(_bidi)_cnt instead of calculation from length.

Please note: The calculation of the number of dbis needed for bidi was
wrong. It was based on the length of the first bidi sg only. I changed it
to correctly sum up entire length of all bidi sgs.

Link: https://lore.kernel.org/r/20200910155041.17654-2-bstroesser@ts.fujitsu.comAcked-by: default avatarMike Christie <michael.christie@oracle.com>
Signed-off-by: default avatarBodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      52ef2743
  3. 16 Sep, 2020 15 commits
  5. 15 Sep, 2020 15 commits
  7. 10 Sep, 2020 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7