- 04 Jan, 2012 14 commits
-
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Luis R. Rodriguez authored
Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.gitAcked-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Mihai Moldovan <ionic@ionic.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Sven Neumann <s.neumann@raumfeld.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Tony Vroon <tony@linx.net> Acked-by:
Pavel Roskin <proski@gnu.org> Acked-by:
Bob Copeland <me@bobcopeland.com> Acked-by:
Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by:
Pat Erley <pat-lkml@erley.org> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Chris Wright <chrisw@sous-sol.org> Acked-by:
Joe Perches <joe@perches.com> Acked-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
John Gordon <john@devicescape.com> Acked-by:
Simon Barber <protocolmagic@gmail.com> Acked-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by:
Jiri Benc <jbenc@upir.cz> Acked-by:
Bruno Randolf <br1@einfach.org> Acked-by:
Scott James Remnant <keybuk@google.com> Acked-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by:
-
Luis R. Rodriguez authored
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit 269ac5fd Author: Kalle Valo <kalle.valo@nokia.com> Date: Tue Dec 1 10:47:15 2009 +0200 cfg80211: indent regulatory messages with spaces The regulatory messages in syslog look weird: kernel: cfg80211: Regulatory domain: US kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Indent them with four spaces instead of the tab character to get prettier output. Signed-off-by:
Kalle Valo <kalle.valo@nokia.com> Acked: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit c4c32294 Author: Yuri Ershov <ext-yuri.ershov@nokia.com> Date: Tue Jun 29 15:08:08 2010 +0400 cfg80211: Update of regulatory request initiator handling In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by:
Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by:
-
Luis R. Rodriguez authored
This fixes this sparse complaint: make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/ CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: got restricted __le16 [usertype] switchcomspdt drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: got restricted __le16 [usertype] switchcomspdt The eep->modalHeader5G.switchcomspdt is a le16 and we return u16, so just return le16_to_cpu(). Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Luis R. Rodriguez authored
Just skip the sparse checks on tracing. CHECK drivers/net/wireless/ath/ath5k/base.c include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: right side has type int include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: error: incompatible types for operation (<) include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: left side has type struct ath5k_hw *<noident> include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: right side has type int /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output /home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output CC [M] drivers/net/wireless/ath/ath5k/base.o Signed-off-by:
-
Luis R. Rodriguez authored
This fixes this rant from sparse: CHECK drivers/net/wireless/ath/ath9k/xmit.c drivers/net/wireless/ath/ath9k/xmit.c:107:13: warning: context imbalance in 'ath_txq_lock' - wrong count at exit drivers/net/wireless/ath/ath9k/xmit.c:112:13: warning: context imbalance in 'ath_txq_unlock' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:123:30: warning: context imbalance in 'ath_txq_unlock_complete' - unexpected unlock CC [M] drivers/net/wireless/ath/ath9k/xmit. Signed-off-by:
-
Luis R. Rodriguez authored
This fixes these sparse warnings: CHECK drivers/net/wireless/ath/ath9k/ar9003_rtt.c drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati Signed-off-by:
-
Ilan Elias authored
Add support for NCI Interface Error Notification. When this notification is received and we're during a data exchange transaction, indicate an error to the NFC core layer via the data exchange callback. Signed-off-by:
Ilan Elias <ilane@ti.com> Signed-off-by:
-
Ilan Elias authored
Addition, deletion, and modification of NCI constants. Changes in NCI commands, responses, and notifications structures. Signed-off-by:
-
Dmitry Shmidt authored
Signed-off-by:
Dmitry Shmidt <dimitrysh@google.com> Signed-off-by:
-
Helmut Schaa authored
This seems to not serve any purpose anymore, at least all frame processing afterwards seems to be able to deal with QoS frames. So, let's save the expensive memmove and just leave the QoS header in the 802.11 frame for further processing. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
- 02 Jan, 2012 1 commit
-
-
- 27 Dec, 2011 1 commit
-
-
Gustavo F. Padovan authored
sock and sk were leftover from another change. Signed-off-by:Gustavo F. Padovan <padovan@profusion.mobi>
-
- 23 Dec, 2011 1 commit
-
-
Hemant Gupta authored
This patch fixes incorrect address storage while storing Long Term Key for LE Devices using SMP (Security Manager Protocol). The address stored should be of remote device and not of source device. Signed-off-by:
Hemant Gupta <hemant.gupta@stericsson.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 22 Dec, 2011 12 commits
-
-
Gustavo F. Padovan authored
We run everything in process context now. Acked-by:
-
Gustavo F. Padovan authored
They don't need to disable interrupts anymore, we only run in process context now. Acked-by:
-
Gustavo F. Padovan authored
It was never used, so removing it. Acked-by:
-
Gustavo F. Padovan authored
Acked-by:
-
Gustavo F. Padovan authored
RFCOMM needs a proper priority mechanism inside itself and not try to use l2cap priority to fix its own problem. Acked-by:
-
Jesse Sung authored
Add another vendor specific ID for BCM20702A0. output of usb-devices: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=9439E5CBF66C C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by:
-
Brian Gix authored
Low Energy pairing is performed through the SMP (Security Manager Protocol) mechanism rather than HCI. Signed-off-by:
Brian Gix <bgix@codeaurora.org> Acked-by:
-
Brian Gix authored
To achive Man-In-The-Middle (MITM) level security with Low Energy, we have to enable User Passkey Comparison. This commit modifies the hard-coded JUST-WORKS pairing mechanism to support query via the MGMT interface of Passkey comparison and User Confirmation. Signed-off-by:
-
Ulisses Furquim authored
When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by:Ulisses Furquim <ulisses@profusion.mobi> Acked-by:
-
Ulisses Furquim authored
The struct hci_proto and all related register/unregister and dispatching code was removed. HCI core code now call directly the SCO and L2CAP event functions. Signed-off-by:
-
Andrei Emeltchenko authored
Make code readable by removing magic numbers. Signed-off-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by:
-
Gustavo F. Padovan authored
No local_bh_disable is needed there once we run everything in process context. The same goes for the replacement of bh_lock_sock() by lock_sock(). Acked-by:
-
- 21 Dec, 2011 11 commits
-
-
Helmut Schaa authored
When mac80211 relays a frame from STA1 to STA2 in AP mode it will get re-classified in the tx path. Unfortunately the frame protocol field is always set to ETH_P_8023 while the classification only kicks in for ETH_P_IP. Hence, a high priority frame from STA1 will be send to STA2 as best effort. Instead of running classification on the frame just use the same priority as STA1 did. Do this by adding 256 to the skb->priority to allow cfg80211_classify8021d to shortcut frame classification. Signed-off-by:
-
Amitkumar Karwar authored
Currently due to following issues in the code even if device is configured in B only, G only or BG mode using iw bitrates command, ibss is getting created in BGN mode. 1) mwifiex_channels_to_cfg80211_channel_type() routine gives channel type as NL80211_CHAN_HT20 for non-HT channel as well, because driver doesn't store HT information provided by stack for the channel. This issue is fixed by maintaining channel type information in 'adapter->channel_type'. 2) Band configuration is unnecessarily overwritten with BGN/AN while setting channel. This patch makes sure that "adapter->config_bands" correctly gets modified while setting channel. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Replace driver specific macros with the corresponding IEEE80211_HT_PARAM_CHA_SEC_* macros defined in ieee80211.h. Also, rename 'adapter->chan_offset' to 'adapter->sec_chan_offset' for consistency. Signed-off-by:
-
Amitkumar Karwar authored
struct mwifiex_ds_band_cfg and mwifiex_set_radio_band_cfg() routine are unnecessary. It can be done with simple equivalant code. Signed-off-by:
-
Luis R. Rodriguez authored
Please NACK nasty patches. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Marek Lindner authored
The IBSS merge code calls ieee80211_sta_expire() with a relatively short expire timeout that purges other clients prematurely. The expire function has to check that only the clients belonging to the vif in question are purged. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Yogesh Ashok Powar authored
When stack calls ampdu_action with action = IEEE80211_AMPDU_TX_STOP for a stream that has already been removed from the driver, call ieee80211_tx_ba_stop_irqsafe to clear the stream in the stack. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
Luis R. Rodriguez authored
Joe changed ath_dbg() to simpify code but while his patch was being merged dfs.c was born and as such did not get the change Joe envisioned. This fixes that. Test compiled with: make allmodconfig Cc: Joe Perches <joe@perches.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: John W. Linville <linville@tuxdriver.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Johannes Berg authored
The ICT code erroneously uses PAGE_SIZE. The bug is that PAGE_SIZE isn't necessarily 4096, so on such platforms this code will not work correctly as we'll try to attempt to read an index in the table that the device never wrote, it always has 4096-byte pages. Additionally, the manual alignment code here is unnecessary -- Documentation/DMA-API-HOWTO.txt states: The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size. This invariant exists (for example) to guarantee that if you allocate a chunk which is smaller than or equal to 64 kilobytes, the extent of the buffer you receive will not cross a 64K boundary. Just use appropriate new constants and get rid of the alignment code. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Alan Cox authored
Just another USB identifier. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Andres Salomon authored
The libertas scan thread expects priv->scan_req to be non-NULL. In theory, it should always be set. In practice, we've seen the following oops: [ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 8363.067490] pgd = c0004000 [ 8363.078393] [00000004] *pgd=00000000 [ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT [ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan] [ 8363.107490] CPU: 0 Not tainted (3.0.0-gf7ccc69 #671) [ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas] [ 8363.118326] LR is at 0x0 [ 8363.120836] pc : [<bf03a854>] lr : [<00000000>] psr: 60000113 [ 8363.120845] sp : ee66bf48 ip : 00000000 fp : 00000000 [ 8363.120845] r10: ee2c2088 r9 : c04e2efc r8 : eef97005 [ 8363.132231] r7 : eee0716f r6 : ee2c02c0 r5 : ee2c2088 r4 : eee07160 [ 8363.137419] r3 : 00000000 r2 : a0000113 r1 : 00000001 r0 : eee07160 [ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8363.157630] Control: 10c5387d Table: 2e754019 DAC: 00000015 [ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8) While I've not found a smoking gun, there are two places that raised red flags for me. The first is in _internal_start_scan, when we queue up a scan; we first queue the worker, and then set priv->scan_req. There's theoretically a 50mS delay which should be plenty, but doing things that way just seems racy (and not in the good way). The second is in the scan worker thread itself. Depending on the state of priv->scan_channel, we cancel pending scan runs and then requeue a run in 300mS. We then send the scan command down to the hardware, sleep, and if we get scan results for all the desired channels, we set priv->scan_req to NULL. However, it that's happened in less than 300mS, what happens with the pending scan run? This patch addresses both of those concerns. With the patch applied, we have not seen the oops in the past two weeks. Signed-off-by:
Andres Salomon <dilinger@queued.net> Cc: stable@kernel.org Signed-off-by:
-
