Clarify the documentation to indicate that these
flags can only be used at the end, i.e. after them
a copy TFD (no flags set) is invalid.
Reported-by: Inbal Hacohen <inbal.hacohen@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In addition to the NOCOPY flag, add a DUP flag that
tells the transport to kmemdup() the buffer and free
it after the command completes.

Currently this is only supported for a single buffer
in a given command, but that could be extended if it
should be needed.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Remove the Kconfig option CONFIG_IWLWIFI_EXPERIMENTAL_MFP,
if the firmware doesn't support MFP then the user shouldn't
have the option to enable it as it won't work correctly.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Since the queue might not be empty, we need to free the
pending Tx packets.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This can happen when we shut down suddenly an interface.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Once in bus enumeration is enough, no need to print it
again when the op_mode loads.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Doing the opposite is wrong, the SCD wouldn't like someone
to clear its data while the queue is still active.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Instead of hardcoding the expression, use the macro
provided in the previous patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When we disable a queue, we don't want the SCD to remember anything
about this queue (what packet was transmitted but not acked, what
packed was acked etc...).
Wipe out all this data in its SRAM.

Constify the arguments to iwl_write_targ_mem_dwords on the way.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Remove a number of variables that are assigned, but not used.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When tracing in iwlwifi, we get all data. Most of
the time, we don't need it, and it just takes up
a lot of extra space in the trace.

Make this optional by recording the data into two
separate trace events if it is needed. Without it,
record only the content of non-data and EAPOL TX
frames.

As a result, tracing without the data tracepoints
will record meta information including the 802.11
headers for all frames but will not record the
contents of data frames to reduce trace overhead.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When warning about a command that is too large,
print out the command name/ID to help figure
out which place is attempting to send a command
that is too large.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull MIPS update from Ralf Baechle:
 "Cleanups and fixes for breakage that occured earlier during this merge
  phase.  Also a few patches that didn't make the first pull request.
  Of those is the Alchemy work that merges code for many of the SOCs and
  evaluation boards thus among other code shrinkage, reduces the number
  of MIPS defconfigs by 5."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits)
  MIPS: SNI: Switch RM400 serial to SCCNXP driver
  MIPS: Remove unused empty_bad_pmd_table[] declaration.
  MIPS: MT: Remove kspd.
  MIPS: Malta: Fix section mismatch.
  MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
  MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.
  MIPS: Alchemy: merge PB1550 support into DB1550 code
  MIPS: Alchemy: Single kernel for DB1200/1300/1550
  MIPS: Optimize TLB refill for RI/XI configurations.
  MIPS: proc: Cleanup printing of ASEs.
  MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.
  MIPS: Add detection of DSP ASE Revision 2.
  MIPS: Optimize pgd_init and pmd_init
  MIPS: perf: Add perf functionality for BMIPS5000
  MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
  MIPS: perf: Remove unnecessary #ifdef
  MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
  MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
  MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
  vmlinux.lds.h: Allow architectures to add sections to the front of .bss
  ...

Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...

The hostprogs need access to the CONFIG_* symbols found in
include/generated/autoconf.h.  But commit abbf1590 ("UAPI: Partition
the header include path sets and add uapi/ header directories") replaced
$(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary
include paths.

This has the undesirable effect of breaking the EFI boot stub because
the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is
never compiled.

It should also be noted that because $(USERINCLUDE) isn't exported by
the top-level Makefile it's actually empty in arch/x86/boot/Makefile.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The UAPI commits forgot to test tooling builds such as tools/perf/,
and this fixes the fallout.

Manual conversion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM update from Russell King:
 "This is the final round of stuff for ARM, left until the end of the
  merge window to reduce the number of conflicts.  This set contains the
  ARM part of David Howells UAPI changes, and a fix to the ordering of
  'select' statements in ARM Kconfig files (see the appropriate commit
  for why this happened - thanks to Andrew Morton for pointing out the
  problem.)

  I've left this as long as I dare for this window to avoid conflicts,
  and I regenerated the config patch yesterday, posting it to our
  mailing list for review and testing.  I have several acks which
  include successful test reports for it.

  However, today I notice we've got new conflicts with previously unseen
  code...  though that conflict should be trivial (it's my changes vs a
  one liner.)"

* 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: config: make sure that platforms are ordered by option string
  ARM: config: sort select statements alphanumerically
  UAPI: (Scripted) Disintegrate arch/arm/include/asm

Fix up fairly conflict in arch/arm/Kconfig (the select re-organization
vs recent addition of GENERIC_KERNEL_EXECVE)

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h

Pull spi UAPI disintegration from David Howells:
 "This is to complete part of the Userspace API (UAPI) disintegration
  for which the preparatory patches were pulled recently.  After these
  patches, userspace headers will be segregated into:

        include/uapi/linux/.../foo.h

  for the userspace interface stuff, and:

        include/linux/.../foo.h

  for the strictly kernel internal stuff.
Signed-off-by: David Howells <dhowells@redhat.com>
  Acked-by: Grant Likely <grant.likely@secretlab.ca>"

* tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/spi

Pull OpenRISC uapi disintegration from Jonas Bonn:
 "OpenRISC UAPI disintegration work from David Howells"

* tag 'openrisc-uapi' of git://openrisc.net/jonas/linux:
  UAPI: (Scripted) Disintegrate arch/openrisc/include/asm

Pull user namespace compile fixes from Eric W Biederman:
 "This tree contains three trivial fixes.  One compiler warning, one
  thinko fix, and one build fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  btrfs: Fix compilation with user namespace support enabled
  userns: Fix posix_acl_file_xattr_userns gid conversion
  userns: Properly print bluetooth socket uids

Pull md updates from NeilBrown:
 - "discard" support, some dm-raid improvements and other assorted bits
   and pieces.

* tag 'md-3.7' of git://neil.brown.name/md: (29 commits)
  md: refine reporting of resync/reshape delays.
  md/raid5: be careful not to resize_stripes too big.
  md: make sure manual changes to recovery checkpoint are saved.
  md/raid10: use correct limit variable
  md: writing to sync_action should clear the read-auto state.
  Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races
  md/raid5: make sure to_read and to_write never go negative.
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.
  md/raid5: protect debug message against NULL derefernce.
  md/raid5: add some missing locking in handle_failed_stripe.
  MD: raid5 avoid unnecessary zero page for trim
  MD: raid5 trim support
  md/bitmap:Don't use IS_ERR to judge alloc_page().
  md/raid1: Don't release reference to device while handling read error.
  raid: replace list_for_each_continue_rcu with new interface
  add further __init annotations to crypto/xor.c
  DM RAID: Fix for "sync" directive ineffectiveness
  DM RAID: Fix comparison of index and quantity for "rebuild" parameter
  DM RAID: Add rebuild capability for RAID10
  DM RAID: Move 'rebuild' checking code to its own function
  ...

The large platform selection choice should be sorted by option string
so it's easy to find the platform you're looking for.  Fix the few
options which are out of this order.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

It seems that was linux/blk_types.h incorrectly exported to fix up some missing
bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.).

So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <jaxboe@fusionio.com>
cc: Tejun Heo <tj@kernel.org>
cc: Al Viro <viro@ZenIV.linux.org.uk>

Unexport part of linux/ppp-comp.h as userspace can't make use of that bit.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paul Mackerras <paulus@samba.org>
cc: David Miller <davem@davemloft.net>

UAPI Disintegration 2012-10-09

* tag 'disintegrate-openrisc-20121009' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate arch/openrisc/include/asm

Pull TPM bugfixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: Propagate error from tpm_transmit to fix a timeout hang
  driver/char/tpm: fix regression causesd by ppi

Pull ACPI & Thermal updates from Len Brown:
 "The generic Linux thermal layer is gaining some new capabilities
  (generic cooling via cpufreq) and some new customers (ARM).

  Also, an ACPI EC bug fix plus a regression fix."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits)
  tools/power/acpi/acpidump: remove duplicated include from acpidump.c
  ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug
  cpuidle / ACPI: fix potential NULL pointer dereference
  ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
  ACPI: EC: Make the GPE storm threshold a module parameter
  thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal()
  Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem.
  thermal: exynos: Use devm_* functions
  ARM: exynos: add thermal sensor driver platform data support
  thermal: exynos: register the tmu sensor with the kernel thermal layer
  thermal: exynos5: add exynos5250 thermal sensor driver support
  hwmon: exynos4: move thermal sensor driver to driver/thermal directory
  thermal: add generic cpufreq cooling implementation
  Fix a build error.
  thermal: Fix potential NULL pointer accesses
  thermal: add Renesas R-Car thermal sensor support
  thermal: fix potential out-of-bounds memory access
  Thermal: Introduce locking for cdev.thermal_instances list.
  Thermal: Unify the code for both active and passive cooling
  Thermal: Introduce simple arbitrator for setting device cooling state
  ...

Pull OpenRISC updates from Jonas Bonn:
 "Fixups for some corner cases, build issues, and some obvious bugs in
  IRQ handling.  No major changes."

* tag 'for-3.7' of git://openrisc.net/jonas/linux:
  openrisc: mask interrupts in irq_mask_ack function
  openrisc: fix typos in comments and warnings
  openrisc: PIC should act on domain-local irqs
  openrisc: Make cpu_relax() invoke barrier()
  audit: define AUDIT_ARCH_OPENRISC
  openrisc: delay: fix handling of counter overflow
  openrisc: delay: fix loops calculation for __const_udelay

Merge tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for misc arches from David Howells:
 "UAPI disintegration for MN10300, FRV and AVR32 arches"

* tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate arch/mn10300/include/asm
  UAPI: (Scripted) Disintegrate arch/frv/include/asm
  UAPI: (Scripted) Disintegrate arch/avr32/include/asm

Pull powerpc uapi disintegration from Benjamin Herrenschmidt.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  UAPI: (Scripted) Disintegrate arch/powerpc/include/asm

Pull arm64 uapi disintegration from Catalin Marinas:
 "UAPI headers for arm64 together with some clean-up to make it
  possible:
   - Do not export the COMPAT_* definitions to user
   - Simplify the compat unistd32.h definitions and remove the
     __SYSCALL_COMPAT guard
   - Disintegrate the arch/arm64/include/asm/* headers"

* tag 'arm64-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  UAPI: (Scripted) Disintegrate arch/arm64/include/asm
  arm64: Do not export the compat-specific definitions to the user
  arm64: Do not include asm/unistd32.h in asm/unistd.h
  arm64: Remove unused definitions from asm/unistd32.h

Pull C6X UAPI disintegration from Mark Salter:

 - scripted UAPI disintegration by David Howells.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  UAPI: (Scripted) Disintegrate arch/c6x/include/asm

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "Cleanups
   - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
   - Add module event hooks for simplified debugging with gdb
 Fixes
   - Fix kdb to stop paging with 'q' on bta and dmesg
   - Fix for data that scrolls off the vga console due to line wrapping
     when using the kdb pager
 New
   - The debug core registers for kernel module events which allows a
     kernel aware gdb to automatically load symbols and break on entry
     to a kernel module
   - Allow kgdboc=kdb to setup kdb on the vga console"

* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  tty/console: fix warnings in drivers/tty/serial/kgdboc.c
  kdb,vt_console: Fix missed data due to pager overruns
  kdb: Fix dmesg/bta scroll to quit with 'q'
  kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
  kgdb,x86: fix warning about unused variable
  mips,kgdb: fix recursive page fault with CONFIG_KPROBES
  kgdb: Add module event hooks

Merge tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen UAPI disintegration from Konrad Rzeszutek Wilk:
 "This has the UAPI disintegration work done by David Howells"

* tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  UAPI: (Scripted) Disintegrate include/xen