- 24 Oct, 2009 8 commits
-
-
Ben Hutchings authored
Siena is still based on the Falcon hardware architecture and will share many of these definitions, so replace falcon_hwdefs.h with regs.h. The new definitions have been generated according to a naming convention which incorporates the type and revision information. Update the code accordingly. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Since there are now separate blocks of code to set the thresholds for each NIC type, it is no longer useful to include them in the NIC type description. Signed-off-by:
-
Ben Hutchings authored
These macros are not extensible to more than two NIC types without repetition of register definitions, and they are only used to deal with a few fields in RX_CFG_REG and global events which moved between Falcon rev A1 and B0. Therefore: - Move RX_CFG_REG initialisation into its own function which tests the NIC revision just once - Explicitly test the NIC revision when checking the RX_RECOVERY flag in global events - Merge definitions of RX_XOFF_MAC_EN flag, which did not move - Remove the macro definitions Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Siena will require entirely different board code. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
- 23 Oct, 2009 2 commits
-
-
jamal authored
This adds support for setting the skb mark. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Ben Hutchings authored
Commits 27fbc7db 'mdio: Expose pause frame advertising flags to ethtool' and c634263d 'sfc: 10Xpress: Initialise pause advertising flags' added to our reported advertising flags. efx_mdio_set_settings() requires that all advertising flags are also present in the supported flags, so make sure that is true. Signed-off-by:
-
- 22 Oct, 2009 5 commits
-
-
Eric Dumazet authored
rtnl_getlink() & rtnl_setlink() run with RTNL held, we can use __dev_get_by_index() and __dev_get_by_name() variants and avoid dev_hold()/dev_put() Adds to rtnl_getlink() the capability to find a device by its name, not only by its index. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Ron Mercer authored
Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
-
Ron Mercer authored
Signed-off-by:
-
Ron Mercer authored
Signed-off-by:
-
Ron Mercer authored
Signed-off-by:
-
- 21 Oct, 2009 4 commits
-
-
Krishna Kumar authored
For connected sockets, the first run of dev_pick_tx saves the calculated txq in sk_tx_queue_mapping. This is not saved if either the device has a queue select or the socket is not connected. Next iterations of dev_pick_tx uses the cached value of sk_tx_queue_mapping. Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
-
Krishna Kumar authored
dst_negative_advice() should check for changed dst and reset sk_tx_queue_mapping accordingly. Pass sock to the callers of dst_negative_advice. (sk_reset_txq is defined just for use by dst_negative_advice. The only way I could find to get around this is to move dst_negative_() from dst.h to dst.c, include sock.h in dst.c, etc) Signed-off-by:
-
Krishna Kumar authored
IPv6: Reset sk_tx_queue_mapping when dst_cache is reset. Use existing macro to do the work. Signed-off-by:
-
Krishna Kumar authored
Introduce sk_tx_queue_mapping; and functions that set, test and get this value. Reset sk_tx_queue_mapping to -1 whenever the dst cache is set/reset, and in socket alloc. Setting txq to -1 and using valid txq=<0 to n-1> allows the tx path to use the value of sk_tx_queue_mapping directly instead of subtracting 1 on every tx. Signed-off-by:
-
- 20 Oct, 2009 11 commits
-
-
Arnaldo Carvalho de Melo authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Eric Dumazet authored
It can help being able to filter packets on their queue_mapping. If filter performance is not good, we could add a "numqueue" field in struct packet_type, so that netif_nit_deliver() and other functions can directly ignore packets with not expected queue number. Lets experiment this simple filter extension first. Signed-off-by:
-
Eric Dumazet authored
We hold RTNL, we can use __dev_get_by_index() instead of dev_get_by_index() Signed-off-by:
-
Eric Dumazet authored
While doing multiple captures, I found af_packet was dirtying cache line containing its prot_hook. This slow down machines where several cpus are necessary to handle capture traffic, as each prot_hook is traversed for each packet coming in or out the host. This patches moves "struct packet_type prot_hook" to the end of packet_sock, and uses a ____cacheline_aligned_in_smp to make sure this remains shared by all cpus. Signed-off-by:
-
Wolfgang Grandegger authored
This patch makes the private functions alloc_can_skb() and alloc_can_err_skb() of the at91_can driver public and adapts all drivers to use these. While making the patch I realized, that the skb's are *not* setup consistently. It's now done as shown below: skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); memset(*cf, 0, sizeof(struct can_frame)); The frame is zeroed out to avoid uninitialized data to be passed to user space. Some drivers or library code did not set "pkt_type" or "ip_summed". Also, "__constant_htons()" should not be used for runtime invocations, as pointed out by David Miller. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
John Dykstra authored
Use symbols instead of magic constants while checking PMTU discovery setsockopt. Remove redundant test in ip_rt_frag_needed() (done by caller). Signed-off-by:
John Dykstra <john.dykstra1@gmail.com> Signed-off-by:
-
Tomas Winkler authored
i2400m-sdio requires iwmc3200top for its operation Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
iwmc3200wifi requires iwmc3200top for its operation Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Tomas Winkler authored
This patch adds Intel Wireless MultiCom 3200 top driver. IWMC3200 is 4Wireless Com CHIP (GPS/BT/WiFi/WiMAX). Top driver is responsible for device initialization and firmware download. Firmware handled by top is responsible for top itself and as well as bluetooth and GPS coms. (Wifi and WiMax provide their own firmware) In addition top driver is used to retrieve firmware logs and supports other debugging features Signed-off-by:
-
jamal authored
Allow bpf to set a filter to drop packets that dont match a specific mark Signed-off-by:
-
Ron Mercer authored
Change RX large buffer size based on MTU. If pages are larger than the MTU the page is divided up into multiple chunks and passed to the hardware. When pages are smaller than MTU each RX buffer can contain be comprised of up to 2 pages. Signed-off-by:
-
- 19 Oct, 2009 8 commits
-
-
Steffen Klassert authored
The last users of skb_icv_walk are converted to ahash now, so skb_icv_walk is unused and can be removed. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
ah4 and ah6 are converted to ahash now, so we can remove the code for the obsolete hash algorithm. Signed-off-by:
-
Steffen Klassert authored
This patch converts ah6 to the new ahash interface. Signed-off-by:
-
Steffen Klassert authored
This patch converts ah4 to the new ahash interface. Signed-off-by:
-
Steffen Klassert authored
To support for ahash algorithms, we add a pointer to a crypto_ahash to ah_data. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
- skb_kill_datagram() can increment sk->sk_drops itself, not callers. - UDP on IPV4 & IPV6 dropped frames (because of bad checksum or policy checks) increment sk_drops Signed-off-by:
-
Eric Dumazet authored
In order to have better cache layouts of struct sock (separate zones for rx/tx paths), we need this preliminary patch. Goal is to transfert fields used at lookup time in the first read-mostly cache line (inside struct sock_common) and move sk_refcnt to a separate cache line (only written by rx path) This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr, sport and id fields. This allows a future patch to define these fields as macros, like sk_refcnt, without name clashes. Signed-off-by:
-
- 18 Oct, 2009 2 commits
-
-
Krishna Kumar authored
1. GENL_MIN_ID is a valid id -> no need to start at GENL_MIN_ID + 1. 2. Avoid going through the ids two times: If we start at GENL_MIN_ID+1 (*or bigger*) and all ids are over!, the code iterates through the list twice (*or lesser*). 3. Simplify code - no need to start at idx=0 which gets reset to GENL_MIN_ID. Patch on net-next-2.6. Reboot test shows that first id passed to genl_register_family was 16, next two were GENL_ID_GENERATE and genl_generate_id returned 17 & 18 (user level testing of same code shows expected values across entire range of MIN/MAX). Signed-off-by:
-
Krishna Kumar authored
genl_register_family() doesn't need to call genl_family_find_byid when GENL_ID_GENERATE is passed during register. Patch on net-next-2.6, compile and reboot testing only. Signed-off-by:
-
