- 12 Jul, 2018 2 commits
-
-
Mark Rutland authored
In do_notify_resume, we manipulate thread_flags as a 32-bit unsigned int, whereas thread_info::flags is a 64-bit unsigned long, and elsewhere (e.g. in the entry assembly) we manipulate the flags as a 64-bit quantity. For consistency, and to avoid problems if we end up with more than 32 flags, let's make do_notify_resume take the flags as a 64-bit unsigned long. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Dave Martin <dave.martin@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
This reverts commit 7e7df71f. When unwinding out of the IRQ stack and onto the interrupted EL1 stack, we cannot rely on the frame pointer being strictly increasing, as this could terminate the backtrace early depending on how the stacks have been allocated. Signed-off-by:
-
- 11 Jul, 2018 2 commits
-
-
Will Deacon authored
The new rseq call arrived in 4.18-rc1, so provide it in the asm-generic unistd.h for architectures such as arm64. Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Will Deacon authored
Implement calls to rseq_signal_deliver, rseq_handle_notify_resume and rseq_syscall so that we can select HAVE_RSEQ on arm64. Acked-by:
-
- 10 Jul, 2018 1 commit
-
-
Arnd Bergmann authored
Building without NUMA but with FLATMEM results in a link error because mem_map[] is not available: aarch64-linux-ld -EB -maarch64elfb --no-undefined -X -pie -shared -Bsymbolic --no-apply-dynamic-relocs --build-id -o .tmp_vmlinux1 -T ./arch/arm64/kernel/vmlinux.lds --whole-archive built-in.a --no-whole-archive --start-group arch/arm64/lib/lib.a lib/lib.a --end-group init/do_mounts.o: In function `mount_block_root': do_mounts.c:(.init.text+0x1e8): undefined reference to `mem_map' arch/arm64/kernel/vdso.o: In function `vdso_init': vdso.c:(.init.text+0xb4): undefined reference to `mem_map' This uses the same trick as the other architectures, making flatmem depend on !NUMA to avoid the broken configuration. Fixes: e7d4bac4 ("arm64: add ARM64-specific support for flatmem") Signed-off-by:
-
- 09 Jul, 2018 3 commits
-
-
Lorenzo Pieralisi authored
Current ACPI ARM64 NUMA initialization code in acpi_numa_gicc_affinity_init() carries out NUMA nodes creation and cpu<->node mappings at the same time in the arch backend so that a single SRAT walk is needed to parse both pieces of information. This implies that the cpu<->node mappings must be stashed in an array (sized NR_CPUS) so that SMP code can later use the stashed values to avoid another SRAT table walk to set-up the early cpu<->node mappings. If the kernel is configured with a NR_CPUS value less than the actual processor entries in the SRAT (and MADT), the logic in acpi_numa_gicc_affinity_init() is broken in that the cpu<->node mapping is only carried out (and stashed for future use) only for a number of SRAT entries up to NR_CPUS, which do not necessarily correspond to the possible cpus detected at SMP initialization in acpi_map_gic_cpu_interface() (ie MADT and SRAT processor entries order is not enforced), which leaves the kernel with broken cpu<->node mappings. Furthermore, given the current ACPI NUMA code parsing logic in acpi_numa_gicc_affinity_init(), PXM domains for CPUs that are not parsed because they exceed NR_CPUS entries are not mapped to NUMA nodes (ie the PXM corresponding node is not created in the kernel) leaving the system with a broken NUMA topology. Rework the ACPI ARM64 NUMA initialization process so that the NUMA nodes creation and cpu<->node mappings are decoupled. cpu<->node mappings are moved to SMP initialization code (where they are needed), at the cost of an extra SRAT walk so that ACPI NUMA mappings can be batched before being applied, fixing current parsing pitfalls. Acked-by:
Hanjun Guo <hanjun.guo@linaro.org> Tested-by:
John Garry <john.garry@huawei.com> Fixes: d8b47fca ("arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT") Link: http://lkml.kernel.org/r/1527768879-88161-2-git-send-email-xiexiuqi@huawei.comReported-by:
Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by:
-
Nikunj Kela authored
Flatmem is useful in reducing kernel memory usage. One usecase is in kdump kernel. We are able to save ~14M by moving to flatmem scheme. Cc: xe-kernel@external.cisco.com Cc: Nikunj Kela <nkela@cisco.com> Signed-off-by:
Nikunj Kela <nkela@cisco.com> Signed-off-by:
-
Will Deacon authored
The arm-soc tree does a good job handling .dts files, so exclude them from the ARM64 entry in MAINTAINERS. Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
- 06 Jul, 2018 12 commits
-
-
Will Deacon authored
lkdtm calls flush_icache_range(), which results in an out-of-line call to __flush_icache_range(), which is not exported to modules. Export the symbol to modules to fix this build breakage. Fixes: 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Signed-off-by:
-
Sudeep Holla authored
Commit 37c3ec2d ("arm64: topology: divorce MC scheduling domain from core_siblings") selected the smallest of LLC, socket siblings, and NUMA node siblings to ensure that the sched domain we build for the MC layer isn't larger than the DIE above it or it's shrunk to the socket or NUMA node if LLC exist acrosis NUMA node/chiplets. Commit acd32e52e4e0 ("arm64: topology: Avoid checking numa mask for scheduler MC selection") reverted the NUMA siblings checks since the CPU topology masks weren't updated on hotplug at that time. This patch re-introduces numa mask check as the CPU and NUMA topology is now updated in hotplug paths. Effectively, this patch does the partial revert of commit acd32e52e4e0. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Sudeep Holla authored
Similar to core_sibling and thread_sibling, it's better to align and rename llc_siblings to llc_sibling. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
-
Sudeep Holla authored
We already repopulate the information on CPU hotplug-in, so we can safely remove the CPU topology and NUMA cpumap information during CPU hotplug out operation. This will help to provide the correct cpumask for scheduler domains. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
-
Sudeep Holla authored
It's incorrect to iterate over all the possible CPUs to update the sibling masks when any CPU is hotplugged in. In case the topology siblings masks of the CPU is removed when is it hotplugged out, we end up updating those masks when one of it's sibling is powered up again. This will provide inconsistent view. Further, since the CPU calling update_sibling_masks is yet to be set online, there's no need to compare itself with each online CPU when updating the siblings masks. This patch restricts updation of sibling masks only for CPUs that are already online. It also the drops the unnecessary cpuid check. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
-
Sudeep Holla authored
This patch adds support to remove all the CPU topology information using clear_cpu_topology and also resetting the sibling information on other sibling CPUs. This will be used in cpu_disable so that all the topology sibling information is removed on CPU hotplug out. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
-
Sudeep Holla authored
Currently numa_clear_node removes both cpu information from the NUMA node cpumap as well as the NUMA node id from the cpu. Similarly numa_store_cpu_info updates both percpu nodeid and NUMA cpumap. However we need to retain the numa node id for the cpu and only remove the cpu information from the numa node cpumap during CPU hotplug out. The same can be extended for hotplugging in the CPU. This patch separates out numa_{add,remove}_cpu from numa_clear_node and numa_store_cpu_info. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by: -
Sudeep Holla authored
Currently reset_cpu_topology clears all the CPU topology information and resets to default values. However we may need to just clear the information when we hotplug out the CPU. In preparation to add the support the same, let's refactor reset_cpu_topology to just reset the information and move clearing out the topology information to clear_cpu_topology. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
-
Will Deacon authored
The ERRATA_MIDR_REV_RANGE macro assigns ARM64_CPUCAP_LOCAL_CPU_ERRATUM to the '.type' field of the 'struct arm64_cpu_capabilities', so there's no need to assign it explicitly as well. Signed-off-by: -
Chintan Pandya authored
arm64 requires break-before-make. Originally, before setting up new pmd/pud entry for huge mapping, in few cases, the modifying pmd/pud entry was still valid and pointing to next level page table as we only clear off leaf PTE in unmap leg. a) This was resulting into stale entry in TLBs (as few TLBs also cache intermediate mapping for performance reasons) b) Also, modifying pmd/pud was the only reference to next level page table and it was getting lost without freeing it. So, page leaks were happening. Implement pud_free_pmd_page() and pmd_free_pte_page() to enforce BBM and also free the leaking page tables. Implementation requires, 1) Clearing off the current pud/pmd entry 2) Invalidation of TLB 3) Freeing of the un-used next level page tables Reviewed-by:Chintan Pandya <cpandya@codeaurora.org> Signed-off-by:
-
Chintan Pandya authored
Add an interface to invalidate intermediate page tables from TLB for kernel. Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipWill Deacon authored
Merge branch 'x86/mm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into aarch64/for-next/core Pull in core ioremap changes from -tip, since we depend on these for re-enabling huge I/O mappings on arm64. Signed-off-by:
-
- 05 Jul, 2018 14 commits
-
-
Will Deacon authored
Patching kernel instructions at runtime requires other CPUs to undergo a context synchronisation event via an explicit ISB or an IPI in order to ensure that the new instructions are visible. This is required even for "hotpatch" instructions such as NOP and BL, so avoid optimising in this case and always go via stop_machine() when performing general patching. ftrace isn't quite as strict, so it can continue to call the nosync code directly. Signed-off-by: -
Will Deacon authored
When invalidating the instruction cache for a kernel mapping via flush_icache_range(), it is also necessary to flush the pipeline for other CPUs so that instructions fetched into the pipeline before the I-cache invalidation are discarded. For example, if module 'foo' is unloaded and then module 'bar' is loaded into the same area of memory, a CPU could end up executing instructions from 'foo' when branching into 'bar' if these instructions were fetched into the pipeline before 'foo' was unloaded. Whilst this is highly unlikely to occur in practice, particularly as any exception acts as a context-synchronizing operation, following the letter of the architecture requires us to execute an ISB on each CPU in order for the new instruction stream to be visible. Acked-by:
-
Mark Rutland authored
Now that users have been migrated to PSR_AA32, kill the unused COMPAT_PSR definitions. The only difference we need a definition for is COMPAT_PSR_DIT_BIT, which differs from PSR_AA32_DIT_BIT. Signed-off-by:
-
Mark Rutland authored
Some code cares about the SPSR_ELx format for exceptions taken from AArch32 to inspect or manipulate the SPSR_ELx value, which is already in the SPSR_ELx format, and not in the AArch32 PSR format. To separate these from cases where we care about the AArch32 PSR format, migrate these cases to use the PSR_AA32_* definitions rather than COMPAT_PSR_*. There should be no functional change as a result of this patch. Note that arm64 KVM does not support a compat KVM API, and always uses the SPSR_ELx format, even for AArch32 guests. Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mark Rutland authored
Some code cares about the SPSR_ELx format for exceptions taken from AArch32 to inspect or manipulate the SPSR_ELx value, which is already in the SPSR_ELx format, and not in the AArch32 PSR format. To separate these from cases where we care about the AArch32 PSR format, migrate these cases to use the PSR_AA32_* definitions rather than COMPAT_PSR_*. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
The SPSR_ELx format for exceptions taken from AArch32 is slightly different to the AArch32 PSR format. Map between the two in the compat ptrace code. Signed-off-by:
-
Mark Rutland authored
The SPSR_ELx format for exceptions taken from AArch32 differs from the AArch32 PSR format. Thus, we must translate between the two when setting up a compat sigframe, or restoring context from a compat sigframe. Signed-off-by:
-
Mark Rutland authored
Currently valid_user_regs() treats SPSR_ELx.DIT as a RES0 bit, causing it to be zeroed upon exception return, rather than preserved. Thus, code relying on DIT will not function as expected, and may expose an unexpected timing sidechannel. Let's remove DIT from the set of RES0 bits, such that it is preserved. At the same time, the related comment is updated to better describe the situation, and to take into account the most recent documentation of SPSR_ELx, in ARM DDI 0487C.a. Signed-off-by:
-
Mark Rutland authored
The AArch32 CPSR/SPSR format is *almost* identical to the AArch64 SPSR_ELx format for exceptions taken from AArch32, but the two have diverged with the addition of DIT, and we need to treat the two as logically distinct. This patch adds new definitions for the SPSR_ELx format for exceptions taken from AArch32, with a consistent PSR_AA32_ prefix. The existing COMPAT_PSR_ definitions will be used for the PSR format as seen from AArch32. Definitions of DIT are provided for both, and inline functions are provided to map between the two formats. Note that for SPSR_ELx, the (RES0) J bit has been re-allocated as the DIT bit. Once users of the COMPAT_PSR definitions have been migrated over to the PSR_AA32 definitions, the (majority of) the former will be removed, so no efforts is made to avoid duplication until then. Signed-off-by:
-
Suzuki K Poulose authored
Track mismatches in the cache type register (CTR_EL0), other than the D/I min line sizes and trap user accesses if there are any. Fixes: be68a8aa ("arm64: cpufeature: Fix CTR_EL0 field definitions") Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
If there is a mismatch in the I/D min line size, we must always use the system wide safe value both in applications and in the kernel, while performing cache operations. However, we have been checking more bits than just the min line sizes, which triggers false negatives. We may need to trap the user accesses in such cases, but not necessarily patch the kernel. This patch fixes the check to do the right thing as advertised. A new capability will be added to check mismatches in other fields and ensure we trap the CTR accesses. Fixes: be68a8aa ("arm64: cpufeature: Fix CTR_EL0 field definitions") Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reported-by:
-
Will Deacon authored
When running with CONFIG_PREEMPT=n, the spinlock fastpaths fit inside 64 bytes, which typically coincides with the L1 I-cache line size. Inline the spinlock fastpaths, like we do already for rwlocks. Signed-off-by: -
Will Deacon authored
It's fair to say that our ticket lock has served us well over time, but it's time to bite the bullet and start using the generic qspinlock code so we can make use of explicit MCS queuing and potentially better PV performance in future. Signed-off-by: -
Will Deacon authored
We can provide an implementation of smp_cond_load_relaxed using READ_ONCE and __cmpwait_relaxed. Signed-off-by:
-
- 04 Jul, 2018 5 commits
-
-
Toshi Kani authored
ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
-
Chintan Pandya authored
The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb751 ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: -
Toshi Kani authored
ioremap() supports pmd mappings on x86-PAE. However, kernel's pmd tables are not shared among processes on x86-PAE. Therefore, any update to sync'd pmd entries need re-syncing. Freeing a pte page also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one(). Disable free page handling on x86-PAE. pud_free_pmd_page() and pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present. This assures that ioremap() does not update sync'd pmd entries at the cost of falling back to pte mappings. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Reported-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Mark Rutland authored
Currently machine_kexec() doesn't reset to EL2 in the case of a crashdump kernel. This leaves potentially dodgy state active at EL2, and means that if the crashdump kernel attempts to online secondary CPUs, these will be booted as mismatched ELs. Let's reset to EL2, as we do in all other cases, and simplify things. If EL2 state is corrupt, things are already sufficiently bad that kdump is unlikely to work, and it's best-effort regardless. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Acked-by:
-
Mikulas Patocka authored
I've got this infinite stacktrace when debugging another problem: [ 908.795225] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 908.796176] 1-...!: (1 GPs behind) idle=952/1/4611686018427387904 softirq=1462/1462 fqs=355 [ 908.797692] 2-...!: (1 GPs behind) idle=f42/1/4611686018427387904 softirq=1550/1551 fqs=355 [ 908.799189] (detected by 0, t=2109 jiffies, g=130, c=129, q=235) [ 908.800284] Task dump for CPU 1: [ 908.800871] kworker/1:1 R running task 0 32 2 0x00000022 [ 908.802127] Workqueue: writecache-writeabck writecache_writeback [dm_writecache] [ 908.820285] Call trace: [ 908.824785] __switch_to+0x68/0x90 [ 908.837661] 0xfffffe00603afd90 [ 908.844119] 0xfffffe00603afd90 [ 908.850091] 0xfffffe00603afd90 [ 908.854285] 0xfffffe00603afd90 [ 908.863538] 0xfffffe00603afd90 [ 908.865523] 0xfffffe00603afd90 The machine just locked up and kept on printing the same line over and over again. This patch fixes it. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
- 02 Jul, 2018 1 commit
-
-
Peng Donglin authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Peng Donglin <dolinux.peng@gmail.com> Signed-off-by:
-
