- 01 Jun, 2017 1 commit
-
-
Daniel Vetter authored
drm_irq.c contains both the irq helper library (optional) and the vblank support (optional, but part of the modeset uapi, and doesn't require the use of the irq helpers at all. Split this up for more clarity of the scope of the individual bits. v2: Move misplaced hunks to this patch (Stefan). Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531092146.12528-1-daniel.vetter@ffwll.ch
-
- 31 May, 2017 13 commits
-
-
Boris Brezillon authored
Fixes a copy&paste error. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1495550187-525-1-git-send-email-boris.brezillon@free-electrons.com
-
Arnd Bergmann authored
The driver is written in a way to enable compile-testing without CONFIG_ARM_AMBA, but it just causes needless warnings: drivers/gpu/drm/pl111/pl111_drv.c:149:26: error: 'pl111_drm_driver' defined but not used [-Werror=unused-variable] drivers/gpu/drm/pl111/pl111_drv.c:81:12: error: 'pl111_modeset_init' defined but not used [-Werror=unused-function] This unhides the probe/remove functions again and just leaves the driver object as unused when CONFIG_ARM_AMBA is disabled, with a __maybe_unused annotation to shut up the warning. Fixes: bed41005 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Ville Syrjälä authored
drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's make it const. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518193837.393-1-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
CRTC don't seem to get shut down in a controlled fashion, but no one bothers to stop interrupts either so this races no matter what. Might as well remove it. A call to drm_atomic_helper_shutdown would be pretty sweet somewhere (and maybe getting rid of the load/unload callbacks while at it). Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Daniel Vetter authored
Again almost correct, but since interrupts are shut down after vblank still a race. Proper cleanup would call drm_atomic_helper_shutdown to make sure this really is safe. v2: Remove misplace malidp hunk (Liviu). Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
-
Daniel Vetter authored
It's only done in the driver load error path, where vblanks don't need to be quiescent anyway. And that's all drm_vblank_cleanup does, since the core will release the vblank allocations on its own already. So drop it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Daniel Vetter authored
Again seems just cargo-culted. Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Daniel Vetter authored
Again seems just cargo-culted. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Daniel Vetter authored
Again seems just cargo-culted ... It's not ordered against any irq/vblank/modeset shutdown. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Daniel Vetter authored
The kernel doc explained what needs to happen, but not how to most easily accomplish that using the functions. Fix that. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
Joe Perches authored
Using the extension saves a bit of code. Miscellanea: o Neaten and simplify dump_dp_payload_table o Removed trailing blank space from output $ size drivers/gpu/drm/drm_dp_mst_topology.o.* drivers/gpu/drm/tinydrm/*.o* text data bss dec hex filename 25848 0 16 25864 6508 drivers/gpu/drm/drm_dp_mst_topology.o.new 26091 0 16 26107 65fb drivers/gpu/drm/drm_dp_mst_topology.o.old 3362 2 0 3364 d24 drivers/gpu/drm/tinydrm/mipi-dbi.o.new 3376 2 0 3378 d32 drivers/gpu/drm/tinydrm/mipi-dbi.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Daniel Vetter authored
And document them lightly. Unfortunately kernel-doc isn't the most awesome for documenting #defines that don't look like functions, it makes functions out of them :-/ Signed-off-by:
-
Arnd Bergmann authored
When DRM_PANEL is disabled, we get a link error for pl111: drivers/gpu/built-in.o: In function `pl111_connector_destroy': pl111_connector.c:(.text+0x3487e6): undefined reference to `drm_panel_detach' For some reason this only appears in the latest linux-next although the driver appears to have used the symbol for a few weeks already. The solution however is simple enough, we just need to add a 'select' statement. Fixes: bed41005 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 30 May, 2017 5 commits
-
-
Jose Abreu authored
Now that we have a callback to check if bridge supports a given mode we can use it in Analogix bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1d0ed1858ae56c827bd09cc1fa6ff4a05d1530eb.1495720737.git.joabreu@synopsys.com
-
Jose Abreu authored
This patches makes use of the new mode_valid() callbacks introduced previously to validate the full video pipeline when modesetting. This calls the connector->mode_valid(), encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() so that we can make sure that the mode will be accepted in every components. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes v1->v2: - Removed call to connector->mode_valid (Ville, Daniel) - Changed function name (Ville) - Use for_each_new_connector_in_state (Ville) - Do not validate if connector and mode didn't change (Ville) - Use new helpers to call mode_valid Signed-off-by:
-
Jose Abreu authored
This changes the connector probe helper function to use the new encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() helper callbacks to validate the modes. The new callbacks are optional so the behaviour remains the same if they are not implemented. If they are, then the code loops through all the connector's encodersXbridgesXcrtcs and calls the callback. If at least a valid encoderXbridgeXcrtc combination is found which accepts the mode then the function returns MODE_OK. Signed-off-by:
-
Jose Abreu authored
Introduce a new helper function which calls mode_valid() callback for all bridges in an encoder chain. Signed-off-by:
-
Jose Abreu authored
Add a new helper to call crtc->mode_valid, connector->mode_valid and encoder->mode_valid callbacks. Suggested-by:
-
- 29 May, 2017 1 commit
-
-
Daniel Vetter authored
This is a leftover from the drm_bus days, where we've had a bus-specific device type for every bus type in drm_device. Except for pci (which we can't remove because dri1 drivers) this is all gone. And the virt driver also doesn't really need it, dev_to_virtio works perfectly fine. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 26 May, 2017 8 commits
-
-
Gustavo Padovan authored
This is now completed. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by:
-
Gustavo Padovan authored
After converting all users to drm_for_each_connector_iter() we no longer need drm_for_each_connector() so we can go ahead and remove it. Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). v2: add missing drm_connector_list_iter_end(Daniel Vetter) Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter() Cc: Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170515134330.3275-1-gustavo@padovan.org
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter() Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
- 24 May, 2017 2 commits
-
-
Chris Wilson authored
Constructing the name takes the majority of the time for allocating a sync_file to wrap a fence, and the name is very rarely used (only via the sync_file status user interface). To reduce the impact on the common path (that of creating sync_file to pass around), defer the construction of the name until it is first used. v2: Update kerneldoc (kbuild test robot) v3: sync_debug.c was peeking at the name v4: Comment upon the potential race between two users of sync_file_get_name() and claim that such a race is below the level of notice. However, to prevent any future nuisance, use a global spinlock to serialize the assignment of the name. v5: Completely avoid the read/write race by only storing the name passed in from the user inside sync_file->user_name and passing in a buffer to dynamically construct the name otherwise. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use markup for document title and authorship; - Mark literal blocks; - Use a numbered list for references. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
- 23 May, 2017 6 commits
-
-
Arnd Bergmann authored
The dead code removal left two unused variables: drivers/gpu/drm/gma500/mdfld_tpo_vid.c: In function 'tpo_vid_get_config_mode': drivers/gpu/drm/gma500/mdfld_tpo_vid.c:34:31: error: unused variable 'ti' [-Werror=unused-variable] This removes them as well. Fixes: 94d7fb49 ("gpu: drm: gma500: remove dead code") Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170522203031.2912874-1-arnd@arndb.de
-
Daniel Vetter authored
Brought up by both Laurent and Andrzej when reviewing the new ->mode_valid hooks. Since mode_fixup is just a simpler version of the much more generic atomic_check we can't really unify it with mode_valid. Most drivers should probably switch their current mode_fixup code to either the new mode_valid or the atomic_check hooks, but e.g. that doesn't exist yet for bridges, and for CRTCs the situation is a bit more complicated. Hence there's no clear equivalence between mode_fixup and mode_valid, even if it looks like that at first glance. v2: Fix accidental double-dot (Adnrzej). Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by:
-
Daniel Vetter authored
Laurent started a massive discussion on IRC about this. Let's try to document common usage a bit better. v2: Cross-links+typos. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by:
-
Jose Abreu authored
This adds a new callback to crtc, encoder and bridge helper functions called mode_valid(). This callback shall be implemented if the corresponding component has some sort of restriction in the modes that can be displayed. A NULL callback implicates that the component can display all the modes. We also change the documentation so that the new and old callbacks are correctly documented. Only the callbacks were implemented to simplify review process, following patches will make use of them. Changes in v2 from Daniel: - Update the warning about how modes aren't filtered in atomic_check - the heleprs help out a lot more now. - Consistenly roll out that warning, crtc/encoder's atomic_check missed it. - Sprinkle more links all over the place, so it's easier to see where this stuff is used and how the differen hooks are related. - Note that ->mode_valid is optional everywhere. - Explain why the connector's mode_valid is special and does _not_ get called in atomic_check. v3: Document what can and cannot be checked in mode_valid a bit better (Andrjez). Answer: Only allowed to look at the mode, nothing else. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Vincent Abriou authored
Add Benjamin Gaignard and Vincent Abriou as STM maintainers: Benjamin Gaignard <benjamin.gaignard@linaro.org> Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Acked-by:
-
Philippe CORNU authored
Fix COMPILE_TEST build issue detected with the rule: "duplicated argument to & or |" Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1495445421-20846-1-git-send-email-philippe.cornu@st.com
-
- 22 May, 2017 4 commits
-
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: bed41005 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Masahiro Yamada authored
Use <...> notation to include headers located in include/linux. While we are here, tweak the includes order a bit to sort them alphabetically. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Robert Foss authored
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by:
Robert Foss <robert.foss@collabora.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Acked-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function platform_device_register_simple() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: af33a919 ("drm/vgem: Enable dmabuf import interfaces") Signed-off-by:
-
