- (leak) memory allocated in dscc4_found1() isn't freed by caller in error path.
  dscc4_free1() is now in charge of this duty.
- (style) code factored in dscc4_remove_one after use of dscc4_free1().

- (compilation fix) plain old typo in struct member naming.

- (compilation fix) missing init.h include;
- (compilation fix) multiple pointers can't be set to NULL in one line if their
  type differ.

Courtesy of Kevin Curtis <kevin.curtis@farsite.co.uk>, posted
on l-k the 2002/04/15.

Description
- (compilation fix) removal of deprecated fields in net_device;
- (bug) early pci_enable_device.

Below a patch removing the list of sense codes from usb/storage/debug.h
since the same list is already found in scsi/constants.c.
This also brings this list up to date with SCSI-3.

The patch below cleans up some SCSI stuff.

The main purpose is to avoid trying to read the partition table
of a removable disk when the drive has told us that no media
are present. (Right now we try to read a 4K block and fail and
retry and fail, and give an I/O error on the first sector,
then try to read the second sector and fail and retry ...)

Unused fields  sector_bit_size  and  sector_bit_shift  in
struct scsi_disk were removed. The field  has_part_table
(that has nothing to do with partition tables) was
renamed to  has_been_registered . The field  ready  was
renamed to  media_present .
The overly long  sd_init_onedisk()  was split up.

When we notice that no media are present anymore, the
partitions are removed from /proc/partitions, but the
drive remains, with size 0.

A future patch will remove the field  capacity  - there are
all too many places where capacities are stored - but the
present patch is large enough already.

There is also a quite independent patch in scsi_error.c
(yesterday someone had an infinite loop retrying to read
bad media) - this patch honours the SCpnt->retries.
In case you applied this already, just ignore the scsi_error.c part.

Also some "Overrides for Emacs" were removed.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

	- remove call to check_region 
	- check the result of request_region
	- call release_region if something goes wrong afterwards during driver initialisation.

I don't have this hardware so I can't verify if it works (compilation checked only).  

[janitor] update the atarilance Ethernet driver for VME Lance cards on the Atari to check the result of request_irq and exit in case of error.

Patch is also available at the following URL
        http://www.chez.com/wstinson/linux/kernel/patch-net-atari

I don't have this hardware to check for myself

	1) check the status of call to request_region 
	2) and return an error in case of problem.

I don't have this hardware so compilation checked only.

[janitor] update the comx-hw-comx wan driver to remove call to check_region and check the status of call to 
request_region instead.

I don't have this hardware so compilation checked only. 

        1) check the status of call to request_region 
        2) and return an error and release the interrupt held in case of problem.

(In my first attempted patch for this driver I had forgotten to release the interrupt.)

I don't have this hardware so compilation checked only.

to 
	1) check result of calls to request_region and handle failure to allocate region resource
	2) add and use an extra label "Failure1" which frees the region resource
	in case of device driver initialisation error later on
       
I don't have this hardware so changes not tested. 

        1) check the status of call to request_region 
        2) and return an error in case of problem.

Note that a call to check_region still remains in this driver (in subroutine check_s508_conflicts). 

I don't have this hardware so compilation checked only.

        1) remove call to check_region and use request_region instead checking the return value 
        2) release region resource in case of driver initialisation error

I don't have this hardware so compilation checked only.

        1) remove call to check_region 
        2) check the status of call to request_region 
        3) and return an error in case of problem.

and returns -EFAULT in case not all data was copied. Patch also changes the return code
of stl_getserial() from void to int in order to return error code in case of failure.

I don't have this hardware so compilation checked only.

1) checks the result of copy_to_user and 
2) returns -EFAULT in case not all data was copied. 

I don't have this hardware so compilation checked only.

	1) checks the result of copy_XX_user and returns -EFAULT in case not all data was copied. 
	2) Patch changes the return code of stl_getserial() from void to int in order to return error code in case of failure.
	3) Patch also fixes two instances of the uninitialised string name being used on request_region calls

I don't have this hardware so compilation checked only.

	1) check the result of copy_from_user 
	2) return -EFAULT in case not all data was copied
	3) release resources in case of failure

	o [CORRECT] Make discovery expiry work properly for non default
		discovery period/timeout

	        <Following patch from Shimizu Takuja/Gerhard Bertelsmann>
	o [FEATURE] Dongle driver for ActiSys 200L hardware
	        <Following patch from Leung/me>
	o [FEATURE] Dongle driver for Mobile Action MA600 hardware

o [CORRECT] Fix two bugs found by the Stanford checker in IrCOMM

	o [FEATURE] Update various comments to current state
	o [CORRECT] Handle properly failure of URB with new speed
	o [CORRECT] Don't test for (self != NULL) after using it (doh !)
	o [FEATURE] Other minor cleanups

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

* add preliminary 8169 gige support (ifdef'd out)
* support several diagnostic ethtool ioctls
* do not write to legacy 8139 registers we never use

into kroah.com:/home/greg/linux/BK/gregkh-2.5

This patch adds support for the Aiptek 8000U driver to the kernel tree.

	- moved the firmware download to probe() time

- added calc_num_ports() ability to determine the number of actual
  ports the device has on the fly.  This should help out with some
  of the Palm and Sony devices.

	- added calc_num_ports() callback so that driver can override the
	  fixed num_ports value after querying the device.
	- split startup() callback into probe() and attach() in anticipation
	  of the driverfs api changes
	- probe() is called before the usb_serial structure is set up,
	  and can be used to download firmware to a device, and other
	  early initialization.
	- attach() is called after the usb_serial structure is completely
	  setup, allowing the device to create private structures, and
	  have full access to the device.