- Do not set RDMAC_MODE_FIFO_LONG_BURST on 5788
- Do not set WDMAC_MODE_RX_ACCEL on 5788
- Note that 5788 cannot use tagged irq status.
- 5788 cannot do TSO
- 5788 cannot do NETIF_F_HIGHDMA.
- 5901 is 10/100 only.
- Update TSO firmware, add 5705 specific TSO firmware.
- Update TSO packet handling in ->hard_start_xmit() to
  match updated TSO firmware.
- TSO is still off by default until more perf analysis is done.

Bug discovered by Michael Chan @ Broadcom.

- call set-wire-speed phy function from tg3_phy_reset, not just _phy_probe
- disable set-wire-speed usage on certain chips, per bcm5700 driver

- do not zero stats/status block on 5705, they don't exist
  (in controller memory, at least)
- define TG3_MAX_MTU macro such that it takes a (tp) pointer arg,
  because the value varies between 5705 and non-5705
- use the macro to simply tg3_change_mtu

- (major) status block DMA address wasn't being set, for 5705. whoops. :)
- (minor) pass 5705-specific RX_STD_MAX_SIZE
- (minor) don't program RCVBDI_JUMBO_THRESH reg on 5705
- (very minor) re-order *THRESH, HOSTCC* regs per bcm570x driver order

of requiring users to select SCSI in order to see it.

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5

From Christoph Hellwig

From David Mosberger:

> We definitely are seeing some strange crashes in get_ksymbol_core().
> I think the reason is the lack of iterator initialization.

Yes, looks good: reset the iterator at allocation.

Remove the PCMCIA release timer that got missed in earlier patch.  This
is required for successful compilation of the driver.

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5

nfsroot_mount().

Problem analysis and fix provided by Andries Brouwer.
Cleanup of nfs_lookup() by me...

o inline assembler funcs cleanup
o machine depend header cleanup
o interrupt management fix

o build script update
o interrupt management fix
o mtd support fix
o signal handling fix

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

a valid SEP bit. The errata has it right: you have to have at
least model 3, stepping 3. Not "model >= 3 or stepping >= 3".

Fix the test accordingly.

into camp4.serpentine.com:/export/bos/bk/linux-early

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5

ESTALE errors.

resent since you don't know whether the server is replying to the
first or the second transmission. However we're currently setting
the cutoff point to be the timeout of the first transmission.

This patch moves the cutoff point to the actual start of the
retransmission.

in line with what is done for TCP.

Signedness corrections when updating RTT.

Be conservative when calculating RTO. Round up the residues.

among other things, for the "soft" mount option.

that call_encode() may cause rq_rcv_buf to be reset despite the fact
that a reply might be delivered at any moment by a softirq.
   
This typically results in 'NFS: server cheating in read reply'
error messages.   

Solve by adding rq_private_buf, which is updated atomically from
rq_rcv_buf.

   - Ensure that we reset req->rq_received before resending if the
     server has sent us a garbage reply.

   - Whenever we grab the xprt_lock_write "semaphore" ensure that we
     reset req->rq_bytes_sent.

   - When resending a TCP request, do not interrupt in the
     middle of transmission even if we do get a reply from the server.

   - Protect the call to rpc_calc_rto() against modification while
     we are calculating

into home.osdl.org:/home/torvalds/v2.5/linux

Fix APIC ID lookup.  In the bios_cpu_apicid[] case, it would walk off
the end of bios_cpu_apicid[] and attempt to send APIC INIT messages to
garbage without this patch, and in the NUMA-Q case, it would attempt to
send NMI wakeups to destinations in the broadcast cluster (which is
harmless, but very poor form) without this patch.

The MSRs might change between CPU models, error out if we haven't met
the CPU before. From Venkatesh Pallipadi

Add a stat counting the (relatively common) case where a PC value is logged
but there is no (longer) any executable mapping covering that address.

Tell user-space how big kernel pointers are, as preferable to sniffing /proc/kcore.
Improve the oprofilefs_ulong_to_user() prototype.