- 29 Mar, 2014 10 commits
-
-
David S. Miller authored
Francois Romieu says: ==================== remove open-coded skb_cow_head. As per http://marc.info/?l=linux-netdev&m=139440579104701. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
françois romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
Thomas Petazzoni authored
The mvneta driver currently uses of_iomap(), which has two drawbacks: it doesn't request the resource, and it isn't devm-style so some error handling is needed. This commit switches to use devm_ioremap_resource() instead, which automatically requests the resource (so the I/O registers region shows up properly in /proc/iomem), and also is devm-style, which allows to get rid of some error handling to unmap the I/O registers region. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
- 28 Mar, 2014 30 commits
-
-
Eric Dumazet authored
Dropping packets in __dev_queue_xmit() when transmit queue is stopped (NIC TX ring buffer full or BQL limit reached) currently outputs a syslog message. It would be better to get a precise count of such events available in netdevice stats so that monitoring tools can have a clue. This extends the work done in caf586e5 ("net: add a core netdev->rx_dropped counter") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Daniel Borkmann authored
Quite often it can be useful to test with dummy or similar devices as a blackhole sink for skbs. Such devices are only equipped with a single txq, but marked as NETIF_F_LLTX as they do not require locking their internal queues on xmit (or implement locking themselves). Therefore, rather use HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will be respected. trafgen mmap/TX_RING example against dummy device with config foo: { fill(0xff, 64) } results in the following performance improvements for such scenarios on an ordinary Core i7/2.80GHz: Before: Performance counter stats for 'trafgen -i foo -o du0 -n100000000' (10 runs): 160,975,944,159 instructions:k # 0.55 insns per cycle ( +- 0.09% ) 293,319,390,278 cycles:k # 0.000 GHz ( +- 0.35% ) 192,501,104 branch-misses:k ( +- 1.63% ) 831 context-switches:k ( +- 9.18% ) 7 cpu-migrations:k ( +- 7.40% ) 69,382 cache-misses:k # 0.010 % of all cache refs ( +- 2.18% ) 671,552,021 cache-references:k ( +- 1.29% ) 22.856401569 seconds time elapsed ( +- 0.33% ) After: Performance counter stats for 'trafgen -i foo -o du0 -n100000000' (10 runs): 133,788,739,692 instructions:k # 0.92 insns per cycle ( +- 0.06% ) 145,853,213,256 cycles:k # 0.000 GHz ( +- 0.17% ) 59,867,100 branch-misses:k ( +- 4.72% ) 384 context-switches:k ( +- 3.76% ) 6 cpu-migrations:k ( +- 6.28% ) 70,304 cache-misses:k # 0.077 % of all cache refs ( +- 1.73% ) 90,879,408 cache-references:k ( +- 1.35% ) 11.719372413 seconds time elapsed ( +- 0.24% ) Signed-off-by:Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
As in xmit path we merely update statistics and free the skb, we can mark the device with LLTX feature, so that upper layers can avoid taking the single txq lock on xmit. While at it, also add missing NETIF_F_SG. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== Implement vxlan ndo calls This short series adds support for the vxlan ndo calls, the udp port is programmed to the firmware using a new command we introduce here which is called "config device". ==================== Signed-off-by: -
Or Gerlitz authored
Add implementation for the add/del vxlan port ndo calls, using the CONFIG_DEV firmware command. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Introduce the CONFIG_DEV firmware command which we will use to configure the UDP port assumed by the firmware for the VXLAN offloads. Signed-off-by:
-
Or Gerlitz authored
When a VF issues a firmware command which is disallowed for them, the PF rerturns -EPERM from that command wrapper. Move to use one such wrapper instance, instead of repeating the same code on such commands. Signed-off-by:
-
Yuval Mintz authored
Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" introduced a possible memory leak on the error flow during multicast filters configuration. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Ben Dooks authored
The pm_rumtime work queue is causing the device to be suspended during initialisation, thus the initialisation may not be able to access registers properly. As the code is called from a work queue, it is possible that this is not seen from certain configurations/builds due to the asynchronos nature of the code. Another issue has also been found where the network device registration calls back into the driver thus causing further pm_runtime calls that also caused issues with the MDIO bus code. This has now been checked and is the only place the MDIO can be called without the device open. Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the pm system does not suspend it during the probe() call and remove the now unnecessary pm_runtime_resume() call. Also add a call in the error path to call pm_runtime_disable(). This fixes the external abort that can cause /sbin/init or other such init processed to die. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dinh Nguyen authored
Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer on top of the Synopsys gmac IP. This patch adds the platform driver for the glue layer which configures the IP before the generic STMMAC driver takes over. Signed-off-by:
Dinh Nguyen <dinguyen@altera.com> Signed-off-by:
-
Yann Droneaud authored
If kmalloc() fails in c4iw_alloc_ucontext(), the function leaves but does not set an error code in ret variable: it will return 0 to the caller. This patch set ret to -ENOMEM in such case. Cc: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@chelsio.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
David S. Miller authored
Erik Hugne says: ==================== tipc: fix handling of NETDEV_CHANGEADDR event Aside from manual reconfiguration of the netdevice hwaddr, this can also be changed automatically for an interface bond in active-backup mode if fail_over_mac is enabled. This patchset fixes the handling of this event in TIPC by properly updating the l2 media address for the bearer, followed by a reinitialization of the node discovery mechanism. ==================== Signed-off-by: -
Erik Hugne authored
The node discovery domain is assigned when a bearer is enabled. In the previous commit we reflect this attribute directly in the bearer structure since it's needed to reinitialize the node discovery mechanism after a hardware address change. There's no need to replicate this attribute anywhere else, so we remove it from the tipc_link_req structure. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Erik Hugne authored
If the hardware address of a underlying netdevice is changed, it is not enough to simply reset the bearer/links over this device. We also need to reflect this change in the TIPC bearer and node discovery structures aswell. This patch adds the necessary reinitialization of the node disovery mechanism following a hardware address change so that the correct originating media address is advertised in the discovery messages. Signed-off-by:
Dong Liu <dliu.cn@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000e, igb, i40e and i40evf Anjali provides i40e fix to remove the ATR filter on RST as well as FIN packets. Cleans up add_del_fdir() because it was used and implemented only for the add, so change the name and drop a parameter. Adds the ability to drop a flow if we wanted to and adds a flow director message level to be used for flow director specific messages. Mitch fixes an issue on i40evf where the Tx watchdog handler was causing an oops when sending an admin queue message to request a reset because the admin queue functions use spinlocks. Greg provides a change to i40e to make the alloc and free queue vector calls orthogonal. Shannon fixes i40e to verify the eeprom checksum and firmware CRC status bits, and shutdown the driver if they fail. This change stops the processing of traffic, but does not kill the PF netdev so that the NVMUpdate process still has a chance at fixing the image. Also provides a fix to make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Jakub Kicinski provides patches for e1000e and igb to fix a number issues found in the PTP code. v2: - drop patch 11 "i40e: Add a fallback debug flow for the driver" from the series based on feedback from David Miller ==================== Signed-off-by: -
Byungho An authored
This fixes following: drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1828 sxgbe_hw_init() error: potential null dereference 'priv->hw'. (kmalloc returns null) Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Byungho An authored
This fixes followings: sparse warnings: (new ones prefixed by >>) >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:197:5: sparse: symbol 'sxgbe_platform_freeze' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:204:5: sparse: symbol 'sxgbe_platform_restore' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:228:24: sparse: symbol 'sxgbe_platform_driver' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1795:6: sparse: symbol 'sxgbe_get_ops' was not declared. Should it be static? Reported-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: add vxlan offload support The first patch adds the FW cmds needed to configure the Skyhawk-R chip for supporting VxLAN offloads. The second patch implements the ndo_add/del_vxlan_port() methods and the plumbing for supporting RX/TX csum, TSO and RSS steering offloads for VxLAN traffic. v2 changes: NETIF_F_SG need not be set for hw_enc_features by the driver as it is done by the stack. v3 changes: * Defer FW cmds needed for VxLAN offloads to a workqueue * Reset FW to VxLAN offloads disabled state in the unload path v4 changes: * Revert the usage of workqueue (introduced in v3) to implement ndo_add/del_vxlan_port() as it is currently not needed (none of the FW cmd calls sleep.) Suggested by David M. ==================== Signed-off-by: -
Sathya Perla authored
This patch mainly implements the add/del_vxlan_port() methods by invoking the needed FW cmds for supporting VxLAN offloads for Skyhawk-R. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
This patch adds support for the FW cmds needed for VxLAN offloads on Skyhawk-R: 1) The VxLAN UDP port needs to be configured via the port-desc of SET_PROFILE_CONFIG_v1 cmd. This patch re-factors the be_set_profile_config() code (used so far only for setting VF QoS) to be used to set any type of descriptor. 2) The MANAGE_IFACE_FILTERS cmds is needed to convert a normal interface into a tunnel interface. This allows for RSS to work even on the inner TCP/UDP headers of VxLAN traffic. Signed-off-by:
-
Jakub Kicinski authored
igb has a single set of TX time stamping resources per NIC. Use a simple bit lock to avoid race conditions and leaking skbs when multiple TX rings try to claim time stamping. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jakub Kicinski authored
skb_tx_timestamp() does not report software time stamp if SKBTX_IN_PROGRESS is set. According to timestamping.txt software time stamps are a fallback and should not be generated if hardware time stamp is provided. Move call to skb_tx_timestamp() after setting SKBTX_IN_PROGRESS. Signed-off-by:
-
Jakub Kicinski authored
tx_hwtstamp_skb is always set before work is scheduled, work is cancelled before tx_hwtstamp_skb is set to NULL. PTP work cannot ever see tx_hwtstamp_skb set to NULL. Signed-off-by:
-
Jakub Kicinski authored
Hardware may fail to report time stamp e.g.: - when hardware time stamping is not enabled - when time stamp is requested shortly after ifup Timeout time stamp reading work to prevent it from scheduling itself indefinitely. Report timeout events via system log and device stats. Signed-off-by:
-
Anjali Singhai Jain authored
We don't need to print this info unless at FD message level. Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
To use for Flow Director specific messages. Change-ID: I69e39a410aa2661f8fd1ed6af0126fa4c335cb77 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Kevin Scott <kevin.c.scott@intel.com> Signed-off-by:
-
Shannon Nelson authored
Make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Change-ID: I2d744fc0c32b3226534ce2cde171d9675c5440a6 Signed-off-by:
-
Jesse Brandeburg authored
There were two spaces between return and the value, we only need one. Change-ID: Iaa42c33f50d8d149cdf1a4c9c1902295bfd991c4 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
-
